Interactions between reflection and praxis in the history of economic thought : the case of the franciscan circles from XIII century Assisi to the present

Resumen: Daniela Parisi analiza el impacto de la vida de San F rancisco de Asís desde la perspectiva de la historia del pensamiento económico. Haciendo referencia particularmente a la atención otorgada en los círculos franciscanos a los signos de los tiempos, la autora traza el camino desde la vida de San Francisco, pasando por la vida de la Orden hasta el presente, y revela los orígenes del movimiento franciscano como un intento de reforma social y religiosa. En primer lugar, el artículo presenta la vida que llevó San Francisco como una “pobreza material voluntaria” en el contexto de los cambios socio-económicos que tuvieron lugar en el siglo XIII, con el advenimiento de la sociedad comercial. Luego, explica cómo la propuesta de San Francisco creció hasta convertirse en una orden religiosa. Finalmente, el artículo intenta iluminar aquellos aspectos en que la Orden Franciscana puede todavía considerarse un signo de los tiempos a través de una existencia comprometida con la pobreza, eliminando lo superfluo de nuestra vida y viviendo en consonancia con el Evangelio.

A study of the influence of free convection on coagulation process

It was assumed [1, 2] that gravity affects the coagulation process in two ways: free convection, which is hard to be avoided on the ground and sedimentation, which can be greatly reduced by the density-matching method. We present a ground-based experiment set-up to study the influence of convection on the perikinetic coagulation for aqueous polystyrene (PS) dispersions. The turbidity measurement was used to evaluate the relative coagulation rate and convection-driven flows in the solution were checked with a visual-magnification system. The pattern of flow field temperature profile in the sample cell is given. Our experiments show that there was no noticeable difference of coagulation rate observed no matter whether convection flows exist (with the flow speed up to 180 mu m/s) or not.

Influence Of Free Surface Curvature Of A Liquid Layer On The Critical Marangoni Convection

The Pearson instability was suggested to discuss the onset of Marangoni convection in a liquid layer of large Prandtl number under an applied temperature difference perpendicular to the free surface in the microgravity environment. In this case, the temperature distribution on the curved free surface is nonuniform, and the thermocapillary convection is induced and coupled with the Marangoni convection. In the present paper the effect of volume ratio of the liquid layer on the critical Marangoni convection and the corresponding spatial variation of the convection structure in zero-gravity condition were numerically investigated by two-dimensional model. (C) 2008 Elsevier Ltd. All rights reserved.

Receptivity To Free-Stream Disturbance Waves For Hypersonic Flow Over A Blunt Cone

A high-order shock-fitting finite difference scheme is studied and used to do direction numerical simulation (DNS) of hypersonic unsteady flow over a blunt cone with fast acoustic waves in the free stream, and the receptivity problem in the blunt cone hypersonic boundary layers is studied. The results show that the acoustic waves are the strongest disturbance in the blunt cone hypersonic boundary layers. The wave modes of disturbance in the blunt cone boundary layers are first, second, and third modes which are generated and propagated downstream along the wall. The results also show that as the frequency decreases, the amplitudes of wave modes of disturbance increase, but there is a critical value. When frequency is over the critial value, the amplitudes decrease. Because of the discontinuity of curvature along the blunt cone body, the maximum amplitudes as a function of frequencies are not monotone.

Comparison Of Shear Banding In Bmgs Due To Thermal-Softening And Free Volume Creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs).

Experimental Study On Liquid Free Surface In Buoyant-Thermocapillary Convection

We investigate the surface deformations of buoyant-thermocapillary convection in a rectangular cavity clue to gravity and temperature gradient between the two sidewalls. The cavity is 52mm x 42mm in horizontal cross section, the thickness of liquid layer h is changed from 2.5mm to 6.5mm. Surface deformations of h = 3.5mm and 6.0mm are discussed and compared. Temperature difference is increased gradually, and the flow in the liquid layer will change from stable convection to unstable convection. Two kinds of optical diagnostic system with image processor are developed for study of the kinetics of buoyant-thermocapillary convection, they give out the information of liquid free surface. The quantitative results are calculated by Fourier transform and correlation analysis, respectively. With the increasing temperature gradient, surface deformations calculated are more declining. It is interesting phenomenon that the inclining directions of the convections in thin and thick liquid layers are different. For a thin layer, the convection is mainly controlled by thermocapillary effect. However, for a thick layer, the convection is mainly controlled by buoyancy effect. The surface deformation theoretically analysed is consistent with our experimental results. The present experiment proves that surface deformation is related to temperature gradient and thickness of the liquid layer. In other words, surface deformation lies on capillary convection and buoyancy convection.

Tendencia natural y libre en el pensamiento de Santo Tomás de Aquino

Resumen: En el pensamiento de Santo Tomás de Aquino, la Filosofía Moral y la Teología Moral tienen al bien como concepto central, es decir, el ser en cuanto apetecible y en cuanto fin de la tendencia o apetito. Lo anterior es debido a que lo bueno expresa el ser en cuanto se relaciona con el apetito y de este modo señala la capacidad del ser para mover la voluntad o una tendencia cualquiera hacia su fin. Es por esto que Santo Tomás sostiene con Aristóteles que el bien coincide con la noción de fin. Y es por la importancia de estos principios y por su repercusión en la moral y sobretodo en la explicación de la libertad moral, que este breve trabajo consiste en una profundización en las relaciones entre el bien, el fin y la naturaleza y algunas de sus aplicaciones a lo que se conoce como tendencia natural o apetito natural y la tendencia libre que se refiere a la voluntad sobre todo a la voluntad de la persona humana. No se trata de un intento por presentar todas las conclusiones que de estos principios se siguen, lo cual correspondería a la Filosofía o a la Teología Moral, sino más bien de una profundización en los principios metafísicos, para asentar los cimientos del orden moral.

A Modified Free Volume Model For Characterizing Of Rate Effect In Bulk Metallic Glasses

We investigate the plastic deformation and constitutive behaviour of bulk metallic glasses (BMGs). A dimensionless Deborah number De(ID) = t(r)/t(i) is proposed to characterize the rate effect in BMGs, where t(r) is the structural relaxing characteristic time of BMGs under shear load, t(i) is the macroscopic imposed characteristic time of applied stress or the characteristic time of macroscopic deformation. The results demonstrate that the modified free volume model can characterize the strain rate effect in BMGs effectively.

El hombre en cuanto persona

Resumen: El artículo examina el concepto de persona, en sus fuentes aporéticas y en el pensamiento de Santo Tomás de Aquino para, finalmente, analizar algunas de sus propiedades en orden a fundamentar una teoría de la imputación. La primera parte comienza con la consideración de los orígenes semánticos, históricos y teológicos de los términos persona e hypóstasis. Trata luego el problema teórico que este concepto implica para el pensamiento moderno, teniendo en cuenta el empobrecimiento de su Metafísica, como consecuencia del nominalismo, el principio de inmanencia y una deficiente concepción de la experiencia. Por último, se toman en consideración algunas consecuencias que dicho empobrecimiento tienen en el pensamiento contemporáneo. La segunda parte está dedicada a exponer la doctrina tomista que de un modo teóricamente definitivo dio solución, con elementos ontológicos aristotélicos, a los problemas planteados en la época Patrística. Se analiza el concepto de sustancia individual (o suppositum), que en la definición de persona opera analógicamente como género próximo, y el de naturaleza espiritual individuada, que opera como diferencia específica. Finalmente, se aportan textos del Aquinate acerca de la definición y de las diferencias conceptuales y ontológicas entre naturaleza y persona. En la tercera parte se exponen algunas propiedades, dividiéndolas en cuatro grupos de tesis: 1°) la persona como sujeto de atribución y dueña de sus proyectos vitales; 2°) como sujeto ontológicamente abierto al mundo, a los semejantes y a Dios; 3°) como sujeto consciente, libre y autónomo; 4°) el carácter ético de la persona, como sujeto de imputación y responsabilidad.

On the formation of well-aligned ZnO nanowall networks by catalyst-free thermal evaporation method

Two-dimensional ZnO nanowall networks were grown on ZnO-coated silicon by thermal evaporation at low temperature without catalysts or additives. All of the results from scanning electronic spectroscope, X-ray diffraction and Raman scattering confirmed that the ZnO nanowalls were vertically aligned and c-axis oriented. The room-temperature photoluminescence spectra showed a dominated UV peak at 378 nm, and a much suppressed orange emission centered at similar to 590 nm. This demonstrates fairly good crystal quality and optical properties of the product. A possible three-step, zinc vapor-controlled process was proposed to explain the growth of well-aligned ZnO nanowall networks. The pre-coated ZnO template layer plays a key role during the synthesis process, which guides the growth direction of the synthesized products. (C) 2007 Elsevier B.V. All rights reserved.

Growth of liquid bridge in AFM

Capillary forces are dominant in adhesive forces measured with an atomic force microscope (AFM) in ambient air, which are thought to be dependent on water film thickness, relative humidity and the free energy of the water film. In this paper, besides these factors, we study the nature of the 'pull-off' force on a variety of atmospheres as a function of the contact time. It is found that capillary forces strongly depend on the contact time. In lower relative humidity atmosphere, the adhesion force is almost independent of the contact time. However, in higher relative humidity, the adhesion force increases with the contact time. Based on the experiment and a model that we present in this paper, the growth of the liquid bridge can be seen as undergoing two processes: one is water vapour condensation; the other is the motion of the thin liquid film that is absorbed on the substrate. The experiment and the growth model presented in this paper have direct relevance to the working mechanism of AFM in ambient air.