Demonstration of some selected aquaculture technologies under farming system research in Jessore and Santahar, Bangladesh

BFRI evolved some selected aquaculture technologies viz. polyculture of carps in perennial ponds, monoculture of short cycled fish species (BFRI super strain) in seasonal ponds and prawn seed production through backyard hatchery system have been demonstrated under Farming System Research (FSR) component in Jessore and Santahar regions. Both polyculture of carps and monoculture of short cycled fish species technologies were tested in farmer's ponds in Kaium Kula village near Jessore town. In polyculture trials, seven species comprising of silver carp (Hypophthalmichthys molirrix), catla (Catla catla), rohu (Labeo rohita), grass carp (Ctenopharyngodon idellus), common carp (Cyprinus carpio), mrigal (Cirrhinus cirrhosus) and silver barb (Barbonymus gonionotus) were stocked @ 9,500 (ratio 6:2:4:2:1:5:5); 10,750 (ratio 6:2:4:2:1:5:5) and 12,000 (ratio 6:2:4:2:1:5:4) fish/ha respectively in ponds of T1, T2 and T3 having three replications of each. The mean highest fish production was 3,148 kg/ha in T3, followed by 2,899 kg/ha in T1 and 2,875 kg/ha in T2. Production of T3 was significantly different (P<0.05) than both T1 and T2, while there was no significant differences (P>0.05) between the production of T1 and T2. In case of trial of short cycled fish species, two treatments were tested: T1 (comprising of BFRI super strain of Nile tilapia, silver carp, common carp and silver barb; ratio 3:5:1:1) and T2 (having only BFRI super strain of Nile tilapia). Stocking density in both the treatments were same (20,000 fish/ha). In this trial average production was higher in T1 (2,743 kg/ha) than that of T2 (2,369 kg/ha) but the production figure in these two treatments was not significantly different (P>0.05). Demonstration of backyard prawn hatchery technology was tested at Santahar region of Bogra district, North-west part of Bangladesh. This hatchery consisted of three main components i) bio-filter, ii) rearing tank unit (chari) and iii) air blower/air pump unit. Plastic drum of 200-250 l capacity and cemented chari of 200-250 l capacity were used as bio-filter and larval rearing containers respectively. A 0.5 hp air blower with 6 aquarium air pump were used to operate the aeration system in the hatchery. Diluted sea water (10-12 ppt) made from brine solution (200-250 ppt) collected from salt-bed was used in the backyard hatchery system of hatching of eggs and rearing of larvae. Rearing of first stage zoea-larvae was reared in three rearing tanks following the stocking densities of 40, 50 and 60/l of water respectively. Production of post-larvae were 20±0.82, 22±1.12 and 28±1.63/liter of water in treatments I, II and III respectively in 38, 40 and 39 days rearing period.

Study of density, distribution and yield on benthic fauna and brown trout (Salmo trutta fario) feeding in Laar reservoirs

Lar lake, with the international UTM specification of 39S 579680 3976567 & 39S 589930 3976184 is Situated in Lar national Park with an aerial distance of 55 Km of Tehran along Haraz road. The present research is carried out as part of a comprehensives Plan for assessment of bioresearches of Lar lake & the rivers flowing into it. This research includes examination of there benthic Samplings performed in Lar lake and each of the related rivers including Delichaee, Ab-e-sefid , Alarm & Lar (Kamardasht).Tubifex and Chironomus genus were found to have the highest frequencies of occurrence in the lake with %77.117 & %21.823 respectively followed by Chironomidae and Simulidae from the Diptera order which accounted for %72.328 and %13.812 occurrences in four rivers examined in the Study. The benthic biomass at various examined Sites and the average wet weight of the benthic biomass in station No one in the lake Was 17.397g and the figure for the examined site in Alarm was 20.242 g which were the highest level among Other examination stations the index for the abundance of species in Alarm river was greater than the rest of the examined rivers with 12.57. A sum of 354 Pieces of brown trouts was caught in the course of sampling which were closely investigated in terms of their digestive tract Content. It was identified that Daphniidae and Chironomus constituted the bulk of eaten items from the lake with %17.985 and %63.973 respectively. Meanwhile, Chironomidae and Simuladae were the most frequently eanten benthos by the fish with %81.47 and %7.93 respectively.The index for the relative length of gut was recorded at 0.49± 0.08 which is well indicative of the carnivorous diet of the fish.The index for the feeding intensity amounted to 138  83 showing that the one year old fish were of more feeding intensity.The coefficient of condition (K) was estimated at 1.02  0.142 for all the caught fish. The average wet weight of the benthos was 10.348 g per square meter which if extended to 700ha surface area of the lake, the total macrobenthic production in the lake would amount to 72730Kg of wet weight or 6510 Kg of dry weight. Since the Secondary Production of macrobenthos have always been double that of their biomass, it is reasonable to assume that the Secondary Production of macrobenthos amount to 145640 Kg by their wet weight and Since the energy transfer in the food chain of the lake from benthos to fish is 10 percent, the fish production Capacity Coming from benthic resources of the lake (Lar) would be 14.5 MT, half of which (7000-8000MT) could annually be harvested. Further more, the actual fish Production Capacity might exceed the projected level Since Daphnia, Rotifers and Ostracoda which belong to Zooplanktons, play a part in the natural diet of trout. Meanwhile, rivers Play a major role in fish nutrition and the annual fish production in Delichaee river is about 4481.8Kg while the figures for Ab-e-sefid, Alerm and Lar rivers are 2370.7 4848.7 and 2586.2 Kg respectively, that further increase fish Production in the area and every year half of these resources can be exploitable from the river & the lake.Nevertheless, due to ecological & biological importance of rivers and the probability of environmental Pollution, devastation of natural fish habitats & their nursery grounds, Sport fishing is not recommended at all.

A highly conductive and transparent solution processed AZO/MWCNT nanocomposite

A solution processed aluminum-doped zinc oxide (AZO)/multi-walled carbon nanotube (MWCNT) nanocomposite thin film has been developed offering simultaneously high optical transparency and low electrical resistivity, with a conductivity figure of merit (σDC/σopt) of ~75-better than PEDOT:PSS and many graphene derivatives. The reduction in sheet resistance of thin films of pristine MWCNTs is attributed to an increase in the conduction pathways within the sol-gel derived AZO matrix and reduced inter-MWCNT contact resistance. Films have been extensively characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), X-ray diffractometry (XRD), photoluminescence (PL), and ultraviolet-visible (UV-vis) spectroscopy. © 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Optimization of efficiency-loss figure of merit in carrier-depletion silicon Mach-Zehnder optical modulator.

In this paper we study the optimization of interleaved Mach-Zehnder silicon carrier depletion electro-optic modulator. Following the simulation results we demonstrate a phase shifter with the lowest figure of merit (modulation efficiency multiplied by the loss per unit length) 6.7 V-dB. This result was achieved by reducing the junction width to 200 nm along the phase-shifter and optimizing the doping levels of the PN junction for operation in nearly fully depleted mode. The demonstrated low FOM is the result of both low V(π)L of ~0.78 Vcm (at reverse bias of 1V), and low free carrier loss (~6.6 dB/cm for zero bias). Our simulation results indicate that additional improvement in performance may be achieved by further reducing the junction width followed by increasing the doping levels.

NUMERICAL ANALYSIS OF A NOVEL 980nm MICROCAVITY SEMICONDUCTOR OPTICAL AMPLIFIER WITH HIGH GAIN AND LOW NOISE

A novel microcavity semiconductor optical amplifier ( MCSOA) was proposed by incorporating top and bottom distributed Bragg reflectors ( DBRs) into the waveguide structure of conventional traveling-wave semiconductor optical amplifiers(TW-SOAs). The incoming( outgoing) light beam incidented onto (escaped from) the waveguide structure at a oblique angle through two optical windows, where the top DBR was etched away, and anti-reflection coating was deposited. The light beams inside the optical cavity were reflected repeatedly between two DBRs and propagated along waveguide in a zigzag optical path. The performance of the MCSOA was systematically investigated by extensive numerical simulation based on a traveling-wave model by taking into account the comprehensive effects of DBRs on both the amplification of signals and the filtering of spontaneous emission( SE). Our results show that the MCSOA is capable of achieving a fiber-to-fiber gain as high as 40dB and a low noise figure is less than 3.5dB.

Detailed model and investigation of gain saturation and carrier spatial hole burning for a semiconductor optical amplifier with gain clamping by a vertical laser field

A detailed model for semiconductor linear optical amplifiers (LOAs) with gain clamping by a vertical laser field is presented, which accounts the carrier and photon density distribution in the longitudinal direction as well as the facet reflectivity. The photon iterative method is used in the simulation with output amplified spontaneous emission spectrum in the wide band as iterative variables. The gain saturation behaviors and the noise figure are numerically simulated, and the variation of longitudinal carrier density with the input power is presented which is associated with the ON-OFF state of the vertical lasers. The results show that the LOA can have a gain spectrum clamped in a wide wavelength range and have almost the same value of noise figure as that of conventional semiconductor optical amplifiers (SOAs). Numerical results also show that an LOA can have a noise figure about 2 dB less than that of the SOA gain clamped by a distributed Bragg reflector laser.

The correlation between preferred orientation and performance of ITO thin films

The tin-doped indium oxide (ITO) thin films were prepared by reactive thermal evaporation on the glass substrates. The effects of substrate temperatures (T-s) on the grain preferred orientation, the electrical and optical properties of ITO films were studied. X-ray diffraction (XRD) patterns indicated that the preferred orientation of film changes from (222) to (400) as T, > 200 degrees C. It can be explained by that the low-index crystallographic planes are easier to be formed when the adatoms have high surface mobility. The Hall measurements indicated that both the concentration and mobility of carrier increase with increasing T,,,. The grain orientation of film does not influence the transmissivity and the carrier concentration, but enhances the carrier mobility. The transmissivity of ITO films is over 90% in the visible wavelength region (except that of the film deposited at 125 degrees C). A minimum resistivity of 5 X 10-4 Omega cm is achieved for the (400) preferred orientation film. Thus, the highest figure of merit of 3.5 x 10(-2) square/Omega is obtained for the film with (400) preferred orientation. The correlation between the preferred orientation and electrical and optical properties are discussed.

High-precision determination of lattice constants and structural characterization of InN thin films

X-ray diffraction and Rutherford backscattering/channeling were used to characterize the crystalline quality of an InN layer grown on Al2O3(0001) Using metal-organic chemical-vapor deposition. A full width at half maximum of 0.27 degrees from an InN(0002) omega scan and a minimum yield of 23% from channeling measurements show that this 480-nm-thick InN layer grown at low temperature (450 degrees C) has a relatively good crystalline quality. High-resolution x-ray diffraction indicates that the InN layer contains a small fraction of cubic InN, besides the predominant hexagonal phase. From this InN sample, the lattice constants a=0.353 76 nm and c=0.570 64 nm for the hexagonal InN and a=0.4986 nm for the cubic InN were determined independently. 2 theta/omega-chi mapping and a pole figure measurement revealed that the crystallographic relationship among the cubic InN, the hexagonal InN, and the substrate is: InN[111]parallel to InN[0001]parallel to Al2O3[0001] and InN{110}parallel to InN{1120}parallel to Al2O3{1010}, and that the cubic InN is twinned. Photoluminescence measurements indicate that the band-gap energy of this sample is approximately 0.82 eV. (c) 2006 American Vacuum Society.

A wide-band front-end for terrestrial and cable receptions

In this paper, a wide-band low noise amplifier, two mixers and a VCO with its buffers implemented in 50GHz 0.35 mu m SiGe BiCMOS technology for dual-conversion digital TV tuner front-end is presented. The LNA and up-converting mixer utilizes current injection technology to achieve high linearity. Without using inductors, the LNA achieves 0.1-1GHz wide bandwidth and 18.8-dB gain with less than 1.4-dB gain variation. The noise figure of the LNA is less than 5dB and its 1dB compression point is -2 dBm. The IIP3 of two mixers is 25-dBm. The measurement results show that the VCO has -127.27-dBc/Hz phase noise at 1-MHz offset and a linear gain of 32.4-MHz/V between 990-MHz and 1.14-GHz. The whole chip consume 253mW power with 5-V supply.

A high-gain high-linearity wide-band low noise amplifier for terrestrial and cable receptions

This paper presents the design of a wide-band low-noise amplifier (LNA) implemented in a 0.35 mu m SiGe BiCMOS technology for cable (DVB-C) and terrestrial (DVB-T) tuner applications. The LNA utilizes current injection to achieve high linearity. Without using inductors, the LNA achieves 0.1-1GHz wide bandwidth and 18.8-dB gain with less than 1.4-dB gain variation. The noise figure(NF) of the wideband LNA is 5dB, its 1-dB compression point is -2dBm and IIP3 is 8dBm. The LNA dissipates 120mW power with a 5-V supply.

Environmentally stable ytterbium figure-of-eight fiber laser producing 177-fs pulses

Pulses of 177 fs and 1035 nm, with average power of 1.2 mW, have been generated directly from a passively mode-locked Yb-doped figure-of-eight fiber laser, with a nonlinear optical loop mirror for mode-locking and pairs of diffraction gratings for intracavity dispersion compensation. To our knowledge, these are the shortest pulses ever to come from a passively mode-locked Yb-doped figure-of-eight fiber laser. This represents a 5-fold reduction in pulse duration compared with that of previously reported passively mode-locked Yb-doped figure-of-eight fiber lasers. Stable pulse trains are produced at the fundamental repetition rate of the resonator, 24.0 MHz. (c) 2007 Elsevier B.V. All rights reserved.

Generation of 207-femtosecond pulses from a ytterbium figure-of-eight fibre laser

We report the generation of 207-fs pulses with 1.2mW average power at 1036 nm directly from a passively mode-locked Yb-doped fibre laser with a nonlinear optical loop mirror for mode-locking and pairs of diffraction gratings for intracavity dispersion compensation. These results imply a 4-fold reduction in pulse duration over previously reported figure-of-eight cavity passively mode-locked Yb-doped fibre lasers. Stable pulse trains are produced at the fundamental repetition rate of the resonator, 24.0MHz. On the other hand, this laser offers a cleaner spectrum and greater stability and is completely self-starting.

A Wide-Band Low Noise Amplifier for Terrestrial and Cable Receptions

We present the design of a wide-band low-noise amplifier （LNA） implemented in 0.35μm SiGe BiCMOS technology for cable and terrestrial tuner applications. The LNA utilizes current injection to achieve high linearity. Without using inductors, the LNA achieves 0.1 ～ 1GHz wide bandwidth and 18. 8dB gain with less than 1.4dB of gain variation. The noise figure of the wideband LNA is 5dB, and its 1dB compression point is - 2dBm and IIP3 is 8dBm. The LNA dissipates 120mW of power with a 5V supply.

The time and energy signals, counter plateau, energy resolution and gas gains performances of a new kind of micro-pattern gaseous detector-Micromegas

In present paper, a new Micromegas detector is developed, and its time and energy signals are obtained in the figure form. The rising time of fast time signal is less than 2 ns due to the very fast collection of avalanche electrons, and the rising time of the energy pulse is about 100 ns, which is corresponding to the total collecting time of the electrons and ions in the avalanche process. The counter plateau, energy resolution and the gas gains of the detector have been compared with other groups' experimental results and the Garfield simulation result.

High-Performance Liquid and Solid Dye-Sensitized Solar Cells Based on a Novel Metal-Free Organic Sensitizer

A new metal-free organic sensitizer (see figure) for high-performance and applicable dye-sensitized solar cells is presented. In combination with a solvent-free ionic liquid electrolyte, a similar to 7% cell made with this sensitizer shows all excellent stability measured under thermal and light-soaking dual stress. For the first time a 4.8% efficiency is reached for all-solid-state dye-sensitized solar cells based oil all organic dye.