Effect of different root caries treatments on the sealing ability of conventional glass ionomer cement restorations

In this study we compared the microleakage of conventional glass ionomer cement (GIC) restorations following the use of different methods of root caries removal. In vitro root caries were induced in 75 human root dentin samples that were divided in five groups of 15 each according to the method used for caries removal: in group 1 spherical carbide burs at low speed were used, in group 2 a hand-held excavator was used, and in groups 3 to 5 an Er,Cr:YSGG laser was used at 2.25 W, 40.18 J/cm(2) (group 3), 2.50 W, 44.64 J/cm(2) (group 4) and 2.75 W, 49.11 J/cm(2) (group 5). The air/water cooling during irradiation was set to 55%/65% respectively. All cavities were filled with GIC. Five samples from each group were evaluated by scanning electron microscopy (SEM) and the other ten samples were thermocycled and submitted to a microleakage test. The data obtained were compared by ANOVA followed by Fisher's test (pa parts per thousand currency sign0.05). Group 4 showed the lowest microleakage index (56.65 6.30; p < 0.05). There were no significant differences among the other groups. On SEM images samples of groups 1 and 2 showed a more regular interface than the irradiated samples. Demineralized dentin below the restoration was observed, that was probably affected dentin. Group 4 showed the lowest microleakage values compared to the other experimental groups, so under the conditions of the present study the method that provided the lowest microleakage was the Er,Cr:YSGG laser with a power output of 2.5 W yielding an energy density of 44.64 J/cm(2).

Applying the National Institute for Clinical Excellence criteria to patients treated with the Genous (TM) Bio-engineered R stent (TM): a sub-study of the e-HEALING (Healthy Endothelial Accelerated Lining Inhibits Neointimal Growth) worldwide registry

The National Institute for Clinical Excellence (NICE) guidelines recommend the use of bare-metal stents (BMS) in non-complex lesions with a low risk of restenosis (diameter a parts per thousand yen3 mm and lesion length a parts per thousand currency sign15 mm) and the use of drug-eluting stents (DES) in more complex lesions with a high risk of restenosis (diameter < 3.0 mm or lesion length > 15 mm). However, the guidelines were created based on studies evaluating BMS and DES only. We performed an analysis of patients undergoing non-urgent percutaneous coronary intervention with the novel endothelial cell capturing stent (ECS). The ECS is coated with CD34(+) antibodies that attract circulating endothelial progenitor cells to the stent surface, thereby accelerating the endothelialization of the stented area. We analyzed all patients enrolled in the worldwide e-HEALING registry that met the NICE criteria for either low-risk or high-risk lesions and were treated with a parts per thousand yen1 ECS. The main study outcome was target vessel failure (TVF) at 12-month follow-up, defined as the composite of cardiac death or MI and target vessel revascularization (TVR). A total of 4,241 patients were assessed in the current analysis. At 12-month follow-up, TVF occurred in 7.0% of the patients with low-risk lesions and in 8.8% of the patients with high-risk lesions (p = 0.045). When evaluating the diabetic patients versus the non-diabetic patients per risk group, no significant differences were found in TVF, MI or TVR in either risk group. The ECS shows good clinical outcomes in lesions carrying either a high or a low risk of restenosis according to the NICE guidelines with comparable rates of cardiac death, myocardial infarction, and stent thrombosis. The TVF rate with ECS was slightly higher in patients with high-risk lesions, driven by higher clinically driven TLR. The risk of restenosis with ECS in patients carrying high-risk lesions needs to be carefully considered relative to other risks associated with DES. Furthermore, the presence of diabetes mellitus did not influence the incidence of TVF in either risk group.

The effect of curing light and chemical catalyst on the degree of conversion of two dual cured resin luting cements

The aim of this study was to evaluate the influence of different curing lights and chemical catalysts on the degree of conversion of resin luting cements. A total of 60 disk-shaped specimens of RelyX ARC or Panavia F of diameter 5 mm and thickness 0.5 mm were prepared and the respective chemical catalyst (Scotchbond Multi-Purpose Plus or ED Primer) was added. The specimens were light-cured using different curing units (an argon ion laser, an LED or a quartz-tungsten-halogen light) through shade A2 composite disks of diameter 10 mm and thickness 2 mm. After 24 h of dry storage at 37A degrees C, the degree of conversion of the resin luting cements was measured by Fourier-transformed infrared spectroscopy. For statistical analysis, ANOVA and the Tukey test were used, with p a parts per thousand currency signaEuro parts per thousand 0.05. Panavia F when used without catalyst and cured using the LED or the argon ion laser showed degree of conversion values significantly lower than RelyX ARC, with and without catalyst, and cured with any of the light sources. Therefore, the degree of conversion of Panavia F with ED Primer cured with the quartz-tungsten-halogen light was significantly different from that of RelyX ARC regardless of the use of the chemical catalyst and light curing source. In conclusion, RelyX ARC can be cured satisfactorily with the argon ion laser, LED or quartz-tungsten-halogen light with or without a chemical catalyst. To obtain a satisfactory degree of conversion, Panavia F luting cement should be used with ED Primer and cured with halogen light.

Multi-Country Event Study Methods

Which event study methods are best in non-U.S. multi-country samples? Nonparametric tests, especially the rank and generalized sign, are better specified and more powerful than common parametric tests, especially in multi-day windows. The generalized sign test is the best statistic but must be applied to buy-and-hold abnormal returns for correct specification. Market-adjusted and market-model methods with local market indexes, without conversion to a common currency, work well. The results are robust to limiting the samples to situations expected to be problematic for test specification or power. Applying the tests that perform best in simulation to merger announcements produces reasonable results.

Essays on European economic and monetary integration

This thesis focuses on two aspects of European economic integration: exchange rate stabilization between non-euro Countries and the Euro Area, and real and nominal convergence of Central and Eastern European Countries. Each Chapter covers these aspects from both a theoretical and empirical perspective. Chapter 1 investigates whether the introduction of the euro was accompanied by a shift in the de facto exchange rate policy of European countries outside the euro area, using methods recently developed by the literature to detect "Fear of Floating" episodes. I find that European Inflation Targeters have tried to stabilize the euro exchange rate, after its introduction; fixed exchange rate arrangements, instead, apart from official policy changes, remained stable. Finally, the euro seems to have gained a relevant role as a reference currency even outside Europe. Chapter 2 proposes an approach to estimate Central Bank preferences starting from the Central Bank's optimization problem within a small open economy, using Sweden as a case study, to find whether stabilization of the exchange rate played a role in the Monetary Policy rule of the Riksbank. The results show that it did not influence interest rate setting; exchange rate stabilization probably occurred as a result of increased economic integration and business cycle convergence. Chapter 3 studies the interactions between wages in the public sector, the traded private sector and the closed sector in ten EU Transition Countries. The theoretical literature on wage spillovers suggests that the traded sector should be the leader in wage setting, with non-traded sectors wages adjusting. We show that large heterogeneity across countries is present, and sheltered and public sector wages are often leaders in wage determination. This result is relevant from a policy perspective since wage spillovers, leading to costs growing faster than productivity, may affect the international cost competitiveness of the traded sector.

I beni immateriali nella valutazione d'azienda

In seguito ad una disamina del materiale presente in letteratura, ci siamo chiesti se i numerosi investimenti pubblicitari, promozionali, di marketing e, per dirla in una parola sola “intangibili”, generassero un aumento del valore dell’impresa nel contesto valutativo oppure se dessero origine esclusivamente ad aumenti di fatturato. L’obiettivo più ambito consiste nel capitalizzare gli investimenti su attività intangibili come la costruzione del marchio, l’utilizzo di brevetti, le operazioni rivolte alla soddisfazione del cliente e tutto quanto si possa definire immateriale. Eppure coesistono nel mare magnum della stessa azienda. Fino a quando non si potrà inserire criteri di valutazione d’azienda delle performance di marketing non ci potrà essere crescita in quanto, le risorse, sono utilizzate senza un criterio di ritorno di investimento.

Tags in the Catalogue: Insights From a Usability Study of LibraryThing for Libraries

Library of Congress Subject Headings (LCSH), the standard subject language used in library catalogues, are often criticized for their lack of currency, biased language, and atypical syndetic structure. Conversely, folksonomies (or tags), which rely on the natural language of their users, offer a flexibility often lacking in controlled vocabularies and may offer a means of augmenting more rigid controlled vocabularies such as LCSH. Content analysis studies have demonstrated the potential for folksonomies to be used as a means of enhancing subject access to materials, and libraries are beginning to integrate tagging systems into their catalogues. This study examines the utility of tags as a means of enhancing subject access to materials in library online public access catalogues (OPACs) through usability testing with the LibraryThing for Libraries catalogue enhancements. Findings indicate that while they cannot replace LCSH, tags do show promise for aiding information seeking in OPACs. In the context of information systems design, the study revealed that while folksonomies have the potential to enhance subject access to materials, that potential is severely limited by the current inability of catalogue interfaces to support tag-based searches alongside standard catalogue searches.

British Monetary Sovereignty: A Cultural Analysis

In this thesis, I will document and analyze historical aspects of the British debate over adopting a common currency with the European Community primarily during the last half of the twentieth century until the present. More specifically, while on the surface such a decision would seem to turn on economic or political considerations, I will show that this historic British decision not to surrender their pound sterling in exchange for the euro was rooted in the nation's cultural identity. During this decades long British debate over the euro, two opposing, but strongly held, positions developed; one side believed that Britain had a compelling interest in bonding with the rest of Europe economically as well as politically, the other side believed that Britain's independent heritage was deeply rooted in many of its traditions including maintaining control of its own monetary matters, which included keeping its pound sterling. As part of this thesis, I have conducted interviews with business leaders, economists, and social scientists as well as researched public records in order to assess many of the arguments favoring and opposing Britain's adoption of the euro. Many Britons strongly believed that it was time to join other Europeans, who were willing to sacrifice their sovereign currency to a bold common currency experiment, while other Britons viewed the pound sterling as too integral a part of British heritage to abandon. Ultimately, British leaders and citizens had to determine whether such a currency tradeoff would be worth it to them as a nation. It was a gamble that twelve other nations (at the time of the euro's 2002 launch) were ready to take, optimistically calculating that easier credit and reduced exchange transaction costs would lead to greater economic prosperity. Many asserted that only with ! ! such a united European monetary coalition would Europe's nations be able to compete trade-wise with powerful economic nations like the United States and China. My conclusion is that Britain's refusal to join the euro was a decision that had less to do with economic opportunity or political motivations and much more to do with how the British people viewed themselves culturally and their identity as an independent nation.

Formation of Exchange Rates on the Russian Market: Dynamics and Modelling

Galina Kovaleva. The Formation of the Exchange Rate on the Russian Market: Dynamics and Modelling. The Russian financial market is fast becoming one of the major sectors of the Russian economy. Assets have been increasing steadily, while new market segments and new financial market instruments have emerged. Kovaleva attempted to isolate the factors influencing exchange rates, determine patterns in the dynamic changes to the rouble/dollar exchange rate, construct models of the processes, and on the basis of these activities make forecasts. She studied the significance of economic indicators influencing the rouble/dollar exchange rate at different times, and developed multi-factor econometric models. In order to reveal the inner structure of the financial indicators and to work out ex-post forecasts for different time intervals, she carried out a series of calculations with the aim of constructing trend-cyclical (TC) and harmonic models, and Box and Jenkins models. She found that: 1. The Russian financial market is dependant on the rouble/dollar exchange rate. Its dynamics are formed under the influence of the short-term state treasury notes and government bonds markets, interbank loans, the rouble/DM exchange rate, the inflation rate, and the DM/dollar exchange rate. The exchange rate is influenced by sales on the Moscow Interbank Currency Exchange and the mechanism of those sales. 2. The TC model makes it possible to conduct an in-depth study of the structure of the processes and to make forecasts of the dynamic changes to currency indicators. 3. The Russian market is increasingly influenced by the world currency market and its prospects are of crucial interest for the world financial community.

Social Policy Facing the Problems of Youth Employment

Rumiana Stoilova (Bulgaria). Social Policy Facing the Problems of Youth Employment. Ms. Stoilova is a researcher in the Institute of Sociology in Sofia and worked on this project from October 1996 to September 1998. This project involved collecting both statistical and empirical data on the state of youth employment in Bulgaria, which was then compared with similar data from other European countries. One significant aspect was the parallel investigation of employment and unemployment, which took as a premise the continuity of professional experience where unemployment is just a temporary condition caused by external and internal factors. These need to be studied and changed on a systematic basis so as to create a more favourable market situation and to improve individuals' resources for improving their market opportunities. A second important aspect of the project was an analysis of the various entities active on the labour market, including government and private institutions, associations of unemployed persons, of employers or of trade unions, all with their specific legal powers and interests, and of the problems in communication between these. The major trends in youth unemployment during the period studied include a high proportion of the registered unemployed who are not eligible for social assistance, a lengthening of the average period of unemployment, an increase in the percentage of people who are unemployed for the first time and an increasing percentage of these who are not eligible for assistance, particularly among newly registered young people. At the same time the percentage of those for who work has been found is rising and during the last three years an increasing number of the unemployed have started some independent economic activity. Regional differences are also considerable and in the case of the Haskovo region represent a danger of losing the youngest generation, with resulting negative demographic effects. One major weakness of the existing institutional structure is the large scale of the black labour market, with clear negative implications for the young people drawn into it. The role of non-governmental organisations in providing support and information for the unemployed is growing and the government has recently introduced special preferences for organisations offering jobs to unemployed persons. Social policy in the labour market has however been largely restricted to passive measures, mostly because of the risk that poverty poses to people continuously excluded from the labour market. Among the active measures taken, well over half are concerned with providing jobs for the unemployed and there are very limited programmes for providing or improving qualifications. The nature of youth employment in Bulgaria can be seen in the influence of sustained structures (generation) and institutions (family and school). Ms. Stoilova studied the situation of the modern generation through a series of profiles, mostly those of continuously unemployed and self-employed persons, but also distinguishing between students and the unemployed, and between high school and university students. The different categories of young people were studied in separate mini-studies and the survey was carried out in five town in order to gather objective and subjective information on the state of the labour market in the different regions. She conducted interviews with several hundred young people covering questions of family background, career plans, attitudes to the labour situation and government measures to deal with it, and such questions as independence, mobility, attitude to work, etc. The interviews with young people unemployed for a long period of time show the risk involved in starting work and its link with dynamics of economic development. Their approval of structural reforms, of the financial restrictions connected with the introduction of a currency board and the inevitability of unemployment was largely declarative. The findings indicate that the continuously unemployed need practical knowledge and skills to "translate" the macroeconomic realities in concrete alternatives of individual work and initiative. The unemployed experience their exclusion from the labour market not only as a professional problem but also as an existential threat, of poverty, forced mobility and dependence on their parents' generation. The exclusion from the market of goods and services means more than just exercising restraint in their consumption, as it places restrictions on their personal development. Ms. Stoilova suggests that more efficient ways of providing financial aid and mobilisation are needed to counteract the social disintegration and marginalisation of the continuously unemployed. In measuring the speed of reform, university students took both employment opportunities and the implementation of the meritocratic principle in employment into account. When offered a hypothetical choice between a well-paid job and work in one's own profession, 62% would prefer opt for the well-paid job and for working for a company that offered career opportunities rather than employment in a family or own company. While most see the information gained during their studies as useful and interesting, relatively few see their education as competitive on a wider level and many were pessimistic about employment opportunities based on their qualifications. Very similar attitudes were found among high school students, with differences being due rather to family and personal situations. The unemployed, on the other hand, placed greater emphasis on possibilities of gaining or improving qualifications on a job and for the opportunities it would offer for personal contacts. High school students tend to attribute more significance to opportunities for personal accomplishment. A significant difference that five times fewer high school students were willing to work for state-owned companies, and many fewer expected to find permanent employment or to find a job in the area where they lived, Within the family situation, actual support for children seems to be higher than the feelings of confidence expressed in interviews. The attitudes of the families towards past experience seems to be linked with their ability to cope with the difficulties of the present, with those families which show an optimistic and active attitude towards the future having a greater respect for parents experience and tolerance in communication between parents and children.

Potential of information technology in dental education

The use of information technology (IT) in dentistry is far ranging. In order to produce a working document for the dental educator, this paper focuses on those methods where IT can assist in the education and competence development of dental students and dentists (e.g. e-learning, distance learning, simulations and computer-based assessment). Web pages and other information-gathering devices have become an essential part of our daily life, as they provide extensive information on all aspects of our society. This is mirrored in dental education where there are many different tools available, as listed in this report. IT offers added value to traditional teaching methods and examples are provided. In spite of the continuing debate on the learning effectiveness of e-learning applications, students request such approaches as an adjunct to the traditional delivery of learning materials. Faculty require support to enable them to effectively use the technology to the benefit of their students. This support should be provided by the institution and it is suggested that, where possible, institutions should appoint an e-learning champion with good interpersonal skills to support and encourage faculty change. From a global prospective, all students and faculty should have access to e-learning tools. This report encourages open access to e-learning material, platforms and programs. The quality of such learning materials must have well defined learning objectives and involve peer review to ensure content validity, accuracy, currency, the use of evidence-based data and the use of best practices. To ensure that the developers' intellectual rights are protected, the original content needs to be secure from unauthorized changes. Strategies and recommendations on how to improve the quality of e-learning are outlined. In the area of assessment, traditional examination schemes can be enriched by IT, whilst the Internet can provide many innovative approaches. Future trends in IT will evolve around improved uptake and access facilitated by the technology (hardware and software). The use of Web 2.0 shows considerable promise and this may have implications on a global level. For example, the one-laptop-per-child project is the best example of what Web 2.0 can do: minimal use of hardware to maximize use of the Internet structure. In essence, simple technology can overcome many of the barriers to learning. IT will always remain exciting, as it is always changing and the users, whether dental students, educators or patients are like chameleons adapting to the ever-changing landscape.

The Electroformation of Lithium-Lead Alloys from Molten Electrolytes

An attempt was made to make lead-lithium alloys by electrodeposition of lithium using a molten bath and a molten lead cathode.The variables taken into consideration were: composition of the melt, temperature of the melt, and current density. The purpose of changing these factors was to determine what effect each had on the current efficiency.

RFID Transponders : Link between information and material flows. How reliable are identification procedures?

Along with the growing complexity of logistic chains the demand for transparency of informations has increased. The use of intelligent RFID-Technology offers the possibility to optimize and control all capacities in use, since it enables the identification and tracking of goods alongside the entire supply chain. Every single product can be located at any given time and a multitude of current and historical data can be transferred. The interaction of the flow of material and the flow of information between the various process steps can be optimized by using RFID-Technology since it guarantees that all required data is available at the right time and at the right place. The local accessibility and convertibility of data allows a flexible, decentralised control of logistic systems. As additional advantages of RFID-Components can be considered that they are individually writable and that their identification can be achieved over considerable distances even if there is no intervisibility between tag and reader. The use of RFID-Transponder opens up new potentials regarding process security, reduction of logistic costs or availability of products. These advantages depend on reliability of the identification processes. The undisputed potentials that are made accessible by the use of RFID-Elements can only be beneficial when the informations that are decentralised and attached to goods and loading equipment can be reliably retrieved at the required points. The communication between tag and reader can be influenced by different materials such as metal, that can disturbed or complicate the radio contact. The communications reliability is subject of various tests and experiments that analyse the effects of different filling materials as well as different alignments of tags on the loading equipment.

Breast cancer on the world wide web: cross sectional survey of quality of information and popularity of websites.

OBJECTIVES: To determine the characteristics of popular breast cancer related websites and whether more popular sites are of higher quality. DESIGN: The search engine Google was used to generate a list of websites about breast cancer. Google ranks search results by measures of link popularity---the number of links to a site from other sites. The top 200 sites returned in response to the query "breast cancer" were divided into "more popular" and "less popular" subgroups by three different measures of link popularity: Google rank and number of links reported independently by Google and by AltaVista (another search engine). MAIN OUTCOME MEASURES: Type and quality of content. RESULTS: More popular sites according to Google rank were more likely than less popular ones to contain information on ongoing clinical trials (27% v 12%, P=0.01 ), results of trials (12% v 3%, P=0.02), and opportunities for psychosocial adjustment (48% v 23%, P<0.01). These characteristics were also associated with higher number of links as reported by Google and AltaVista. More popular sites by number of linking sites were also more likely to provide updates on other breast cancer research, information on legislation and advocacy, and a message board service. Measures of quality such as display of authorship, attribution or references, currency of information, and disclosure did not differ between groups. CONCLUSIONS: Popularity of websites is associated with type rather than quality of content. Sites that include content correlated with popularity may best meet the public's desire for information about breast cancer.