915 resultados para Confecção de grades
Resumo:
O objetivo deste trabalho foi estimar e mapear as áreas com as culturas de soja e milho, no Paraná, com uso de imagens multitemporais EVI/Modis. Foram avaliados os anos‑safra de 2004/2005 a 2007/2008. Em razão da alta dinâmica temporal e da heterogeneidade de datas de semeadura das culturas no estado, foram utilizadas cenas que contemplavam as fases de pré‑plantio e de desenvolvimento inicial das culturas, para gerar a imagem de mínimo EVI (IMIE), e cenas que consideravam o pico vegetativo das culturas, para gerar a imagem de máximo EVI (IMAE). Estas imagens foram utilizadas para gerar a composição colorida RGB (R, IMAE; GB, IMIE), o que permitiu a confecção de máscara das áreas com soja e milho. As estimativas das áreas de máscara por município foram comparadas com dados oficiais de produção agrícola municipal, tendo-se observado bons ajustes (R²>0,84, d>0,95, c>0,85) entre os dados. Para a avaliação da exatidão espacial das máscaras, imagens Landsat‑5/TM e AWiFS/IRS foram usadas como referência para construção da matriz de erros. Os resultados obtidos são indicativos de que a metodologia proposta é altamente eficiente e pode ser utilizada para mapeamento dessas culturas.
Resumo:
INTRODUCTION: To report acute and late toxicities in patients with intermediate- and high-risk prostate cancer treated with combined high-dose-rate brachytherapy (HDR-B) and intensity-modulated radiation therapy (IMRT). MATERIALS AND METHODS: From March 2003 to September 2005, 64 men were treated with a single implant HDR-B with 21 Gy given in three fractions, followed by 50 Gy IMRT along with organ tracking. Median age was 66.1 years, and risk of recurrence was intermediate in 47% of the patients or high in 53% of the patients. Androgen deprivation therapy was received by 69% of the patients. Toxicity was scored according to the CTCAE version 3.0. Median follow-up was 3.1 years. RESULTS: Acute grade 3 genitourinary (GU) toxicity was observed in 7.8% of the patients, and late grades 3 and 4 GU toxicity was observed in 10.9% and 1.6% of the patients. Acute grade 3 gastrointestinal (GI) toxicity was experienced by 1.6% of the patients, and late grade 3 GI toxicity was absent. The urethral V(120) (urethral volume receiving > or =120% of the prescribed HDR-B dose) was associated with acute (P=.047) and late > or = grade 2 GU toxicities (P=.049). CONCLUSIONS: Late grades 3 and 4GU toxicity occurred in 10.9% and 1.6% of the patients after HDR-B followed by IMRT in association with the irradiated urethral volume. The impact of V(120) on GU toxicity should be validated in further studies.
Resumo:
Peer-reviewed
Resumo:
STUDY DESIGN.: Retrospective radiologic study on a prospective patient cohort. OBJECTIVE.: To devise a qualitative grading of lumbar spinal stenosis (LSS), study its reliability and clinical relevance. SUMMARY OF BACKGROUND DATA.: Radiologic stenosis is assessed commonly by measuring dural sac cross-sectional area (DSCA). Great variation is observed though in surfaces recorded between symptomatic and asymptomatic individuals. METHODS.: We describe a 7-grade classification based on the morphology of the dural sac as observed on T2 axial magnetic resonance images based on the rootlet/cerebrospinal fluid ratio. Grades A and B show cerebrospinal fluid presence while grades C and D show none at all. The grading was applied to magnetic resonance images of 95 subjects divided in 3 groups as follows: 37 symptomatic LSS surgically treated patients; 31 symptomatic LSS conservatively treated patients (average follow-up, 2.5 and 3.1 years); and 27 low back pain (LBP) sufferers. DSCA was also digitally measured. We studied intra- and interobserver reliability, distribution of grades, relation between morphologic grading and DSCA, as well relation between grades, DSCA, and Oswestry Disability Index. RESULTS.: Average intra- and interobserver agreement was substantial and moderate, respectively (k = 0.65 and 0.44), whereas they were substantial for physicians working in the study originating unit. Surgical patients had the smallest DSCA. A larger proportion of C and D grades was observed in the surgical group. Surface measurementsresulted in overdiagnosis of stenosis in 35 patients and under diagnosis in 12. No relation could be found between stenosis grade or DSCA and baseline Oswestry Disability Index or surgical result. C and D grade patients were more likely to fail conservative treatment, whereas grades A and B were less likely to warrant surgery. CONCLUSION.: The grading defines stenosis in different subjects than surface measurements alone. Since it mainly considers impingement of neural tissue it might be a more appropriate clinical and research tool as well as carrying a prognostic value.
Resumo:
AbstractDespite advances in diagnosis and treatment made over the past two decades, high-gradeprimary brain tumors remain incurable neoplasms. Glioblastoma (GBM) represents the mostmalignant stage of astrocytic brain tumors. Identification of diagnostic and prognostic markers ineasily accessible biological material, such as plasma or cerebro-spinal fluid (CSF), would greatlyfacilitate the management of GBM patients. Elucidation of the molecular mechanisms that underlie thefunction of the factors implicated in GBM development would pave the way towards their potentialutility in cancer-targeting therapy.MIC-1/GDF15 (Macrophage Inhibitory Cytokine-1/ Growth Differentiation Factor 15), asecreted protein of the TGF-β superfamily, emerged as a candidate marker exhibiting increasingmRNA expression during astrocytoma malignant progression. However, injection of MIC-1/GDF15over-expressing GBM cell lines into nude mice has been previously shown to completely abolish theinherent tumorigenicity.In this study, determination of MIC-1/GDF15 protein levels in the CSF of a cohort of 94patients with intracranial tumors including astrocytomas (grades II, III and IV), meningioma, andmetastasis revealed significantly increased concentrations in GBM patients as compared to controlcohort of patients treated for non-neoplastic diseases. However, MIC-1/GDF15 levels were notelevated in the matching plasma samples from these patients. Most interestingly, GBM patients withthe increased concentrations of MIC-1/GDF15 in the CSF had worse outcome.In GBM tissue, it was found that the expression of MIC-1/GDF15 gene is low. Promotermethylation of the gene may partially explain the overall low expression levels. Investigation of thecellular origin of MIC-1/GDF15 expression in GBM tissue led to the MIC-1/GDF15 protein detectionin a subpopulation of the tumor infiltrating macrophages. These findings substantiated the workinghypothesis of MIC-1/GDF15 as harboring tumor-suppressive properties in GBM. Analysis of thesignaling pathway mediated by MIC-1/GDF15 in GBM highlighted the potential role of TGF-β signaltransduction. However, the lack of the functional response to the presence of MIC-1/GDF15 in-vitrosuggested operation of a paracrine loop for suppression of tumor formation which is evident solely invivo.In conclusion, MIC-1/GDF15 protein measured in the CSF may have diagnostic andprognostic values in patients with intracranial tumors. Molecular studies collectively proposeimplication of the tumor-host interactions in mediating the MIC-1/GDF15 tumor-suppressing activityduring GBM development.RésuméMalgré les progrès durant ces deux dernières décennies dans le diagnostique et le traitementdes tumeurs du cerveau primaires, ces néoplasmes restent incurables. Le glioblastome représente laforme la plus maligne des tumeurs astrocytiques du cerveau (astrocytomes). Pour le diagnostic et lepronostic, l'identification de marqueurs présents dans des substances facilement accessibles comme leplasma où le liquide céphalorachidien (LCR) faciliterait beaucoup la prise en charge des patients. Lacompréhension des mécanismes moléculaires de facteurs impliqués dans le développement du GBMpourrait ouvrir la voie vers l'utilisation de ces mécanismes dans des thérapies ciblées.MIC-1/GDF15 (Macrophage Inhibitory Cytokine-1/ Growth Differentiation Factor 15), uneprotéine secrétée qui appartient à la superfamille TGF-β, s'est révélé être un marqueur candidat, dontl'expression d'ARN messager augmente pendant la progression des astrocytomes malins. Cependant,une précedente étude montre que l'injection des lignées cellulaires de GBM fortement productrices deMIC-1/GDF15 dans des souris immunodéprimées abolit la tumorigénicité.Dans cette étude, les mesures dans une cohorte de 94 patients atteints de tumeursintracrâniennes comprenant des astrocytomes (grades II, III et IV), méningiomes et métastases,présentent des augmentations significatives des niveaux protéiques de MIC-1/GDF15 dans le LCRdes patients atteints de GBM par rapport aux patients traités pour des maladies non cancéreuses.Cependant, les niveaux de MIC-1/GDF15 n'étaient pas spécialement élevés dans le plasma. De plus,les patients atteints d'un GBM avec des niveaux élevés de MIC-1/GDF15 dans le LCR ont survécumoins longtemps. Dans les tissus de glioblastome, on observe que le gène MIC-1/GDF15 est peuexprimé. La méthylation du promoteur explique partiellement le faible niveau d'expression du gène.La recherche l'origine cellulaire de l'expression de MIC-1/GDF15, a permis de découvrir la présencede protéines MIC-1/GDF15 dans une sous-population de macrophages qui infiltrent les tumeurs. Cetteobservation supporte l'hypothèse que MIC-1/GDF15 présentait des propriétés de suppression destumeurs de type GBM. Des études sur les voies de signalisation régulées par MIC-1/GDF15 dans lesGBMs ont souligné l'importance de la voie de transduction du signal TGF-β. Cependant, l'absence deréponse fonctionnelle à MIC-1/GDF15 in vitro suggère fortement l'activité d'une boucle paracrinepour la répression de la formation de tumeur, qui n'est observé que in vivo.En conclusion, la protéine MIC-1/GDF15 mesurée dans le LCR pourrait avoir une valeur pourle diagnostic et le pronostic chez les patients atteints de GBM. Les études moléculaires suggèrent unepossible implication de l'interaction hôte-tumeur dans l'activité anti-tumorale de MIC-1/GDF15 sur leGBM.
Resumo:
O objetivo deste trabalho foi avaliar a cokrigagem ordinária, com dados de altitude e distância do mar, em comparação à krigagem ordinária, na espacialização da precipitação pluvial dos períodos anual, seco e úmido, no Estado do Espírito Santo. Os dados de altitude e distância do mar foram obtidos de pontos de amostragem em grades regulares e irregulares. Foram utilizados dados de 108 postos pluviométricos. A avaliação dos métodos e das variáveis foi realizada com base na validação cruzada, tendo-se considerado os erros dos valores preditos e o ajuste dos modelos de regressão linear para valores observados e preditos. A grade regular para amostragem das covariáveis apresentou melhor acurácia de predição em comparação à grade irregular. A cokrigagem produziu resultados mais acurados do que a krigagem, verificados por pequenas diferenças nos erros médios absolutos, capazes de produzir mapas estatisticamente diferentes. A interpolação por cokrigagem e o uso de grades regulares para amostragem são preferíveis, principalmente se as covariáveis são de fácil obtenção e de baixo custo.
Resumo:
Purpose: The aim of this review was to systematically evaluate and compare the frequency of veneer chipping and core fracture of zirconia fixed dental prostheses (FOPS) and porcelain-fused-to-metal (PFM) FDPs and determine possible influencing factors. Materials and Methods: The SCOPUS database and International Association of Dental Research abstracts were searched for clinical studies involving zirconia and PFM FDPs. Furthermore, studies that were integrated into systematic reviews on PFM FDPs were also evaluated. The principle investigators of any clinical studies on zirconia FDPs were contacted to provide additional information. Based on the available information for each FOP, a data file was constructed. Veneer chipping was divided into three grades (grade 1 = polishing, grade 2 = repair, grade 3 = replacement). To assess the frequency of veneer chipping and possible influencing factors, a piecewise exponential model was used to adjust for a study effect. Results: None of the studies on PFM FDPs (reviews and additional searching) sufficiently satisfied the criteria of this review to be included. Thirteen clinical studies on zirconia FDPs and two studies that investigated both zirconia and PFM FDPs were identified. These studies involved 664 zirconia and 134 PFM FDPs at baseline. Follow-up data were available for 595 zirconia and 127 PFM FDPs. The mean observation period was approximately 3 years for both groups. The frequency of core fracture was less than 1% in the zirconia group and 0% in the PFM group. When all studies were included, 142 veneer chippings were recorded for zirconia FDPs (24%) and 43 for PFM FDPs (34%). However, the studies differed extensively with regard to veneer chipping of zirconia: 85% of all chippings occurred in 4 studies, and 43% of all chippings included zirconia FDPs. If only studies that evaluated both types of core materials were included, the frequency of chipping was 54% for the zirconia-supported FDPs and 34% for PFM FDPs. When adjusting the survival rate for the study effect, the difference between zirconia and PFM FDPs was statistically significant for all grades of chippings (P = .001), as well as for chipping grade 3 (P = .02). If all grades of veneer chippings were taken into account, the survival of PFM FDPs was 97%, while the survival rate of the zirconia FDPs was 90% after 3 years for a typical study. For both PFM and zirconia FDPs, the frequency of grades 1 and 2 veneer chippings was considerably higher than grade 3. Veneer chipping was significantly less frequent in pressed materials than in hand-layered materials, both for zirconia and PFM FDPs (P = .04). Conclusions: Since the frequency of veneer chipping was significantly higher in the zirconia FDPs than PFM FDPs, and as refined processing procedures have started to yield better results in the laboratory, new clinical studies with these new procedures must confirm whether the frequency of veneer chipping can be reduced to the level of PFM. Int J Prosthodont 2010;23:493-502
Resumo:
Immigrant Pupils in Special Education Schools The study focused on the opinions of immigrant pupils in the 1st–9th grades of basic education in four special education schools of the City of Turku and in need of special support about the following: 1. Their difficulties in going to school in general education before the transfer to a special education school. 2. Their opinions about the transfer process to special education and the changes in their school practice after being transferred to a special education school. 3. Their experiences about their school and coping in special education school. The study strengthened the idea that immigrant pupils need positive special treatment, linguistic support, individual guidance, small teaching groups and operating models that promote well-being on their integration and education path. The central educational idea of inclusive education is based on deconstructing the power structures concerning gender, ethnicity and “race” and approval of differences in the pupils. Shifting the emphasis from the pupil to working on the learning environment has resulted in special education no longer being primarily separate special education tied to a certain place, but directing the teaching more towards individuality. The central dimension of intercultural competence of a teacher working in a multicultural class seems to be the attitudes and approaches to a different pupil; the teacher must be interculturally sensitive when facing children and young people from a foreign culture. Education and teaching affect every sector of the pupil’s well-being. Learning and learning results have a connection with teaching, education and well-being. Every sector is important for the going to school and integration of an immigrant pupil in need of special support. The basis of the study is the equality of opportunities and the humanistic idea of the human being in the Finnish education policy. The immigrant pupils selected for the study represented the following language groups: Arabian, Albanian, Somali, Russian and Vietnamese. In the four special education schools, the number of immigrant pupils belonging to these language groups (2004) totalled 104. A total of 89 pupils i.e. 86% answered the questionnaire, which is sufficient considering the generalisation of the study. Although this is basically a quantitative study, the interviewing method was used in part of the study, because the questionnaires were in Finnish and consequently, it was difficult for some immigrant pupils to understand them. Understanding the questions was also affected by the fact that the age distribution in the study was very wide (7–18). According to the results of the study, the immigrants felt that the biggest drawbacks in general education were their inability to speak Finnish and lack of concentration. The actual process of being transferred to a special education class remained unclear for immigrant pupils, and they could do very little about the transfer themselves. The results show that immigrant pupils coped well in special education school; they felt that their learning ability and concentration improved in the small groups of the special education school. They considered the individual support given in the special education schools to be useful. The lower-grade immigrant pupils had a more positive attitude towards special education school than the upper-grade immigrant pupils. In all the special education schools the immigrant pupils experienced that they were in a good position in the class; girls felt this even a little more strongly than boys. The teacher-pupil-relationship was felt to be good. School bullying being so common was a negative feature experienced by immigrant pupils, who were often targets or bullies themselves. Immigrant pupils believed in their success at school and in the opportunities offered by special education schools. Generally they were of the opinion that pupils are not labelled by special school; however, upper-grade immigrant pupils were more hesitant than lower-grade immigrant pupils. This study aimed at bringing out the immigrant pupils’ own opinions. Teaching immigrant pupils in special education schools has not been very much studied in Finland, which made the topic new and even more challenging.
Resumo:
Tässä diplomityössä on tarkasteltu Oulun Energian kaukolämpötoiminnan kehitystä lähitulevaisuudessa. Työn yhteydessä selvitettiin nykyisessä tilanteessa mitoituslämpötilaa -32 oC vastaava tehotilastollisen analyysin avulla ja laadittiin kasvuennuste kaukolämmityksen tehontarpeesta seuraavalle viidelletoista vuodelle. Kasvuennusteen perusteella on tehty tarkastelu kaukolämmön varatehon riittävyydestä. Verkoston tehonsiirtokykyä nykyisissä ja tulevaisuuden kuormitustilanteissa on tarkasteltu Process VisioninGrades Heating -verkostolaskentaohjelmiston avulla. Tarkastelun perusteella kaukolämpöverkoston siirtokyky on kohtalaisen hyvä. Verkoston ongelmakohtia ovat länsi-itäsuunnassa olevat siirtolinjat. Varatehon määrä tulee laskemaan lähivuosina alle suositeltavan määrän, mikäli uutta lämmöntuotantokapasiteettia ei rakenneta. Alkuvaiheessa paras ratkaisu tilanteen korjaamiseksi olisi uusien lämpökeskusten rakentaminen sekä kaupungin etelä- että itä-osiin. 2010-luvulla tarve uuden voimalaitoksen rakentamiselle kaukolämpötehon tarpeen kattamiseksi tulee kasvamaan.
Resumo:
Työn tavoitteena oli selvittää tilannetta Euroopan automaattiteräsmarkkinoilla ja sen perusteella arvioida Imatra Steelin mahdollisuuksia kilpailla kyseessä olevilla markkinoilla. Tärkein tavoite oli kokonaismarkkinapotentiaalin arvioiminen Saksan, Ruotsin, Englannin ja Suomen markkinoilla. Lisäksi selvitettiin käytetyt automaattiteräslajit ja mitta-alue, hintataso sekä koneistukseenliittyviä teknisiä yksityiskohtia.Tavoitteena oli myös kartoittaa asenteita ja mielipiteitä mahdollisesta lyijyn käytön kieltämisestä teräksen seosaineena tulevaisuudessa. Paremman kokonaiskuvan saamiseksi analysoitiin myös kilpailutilannetta Euroopassa. Työn teoriakehyksessä tutkittiin teollisuustuotteiden markkinatutkimuksen suorittamisen erityispiirteitä, markkinapotentiaalin määrittämiseen liittyviä käsitteitä ja kilpailija-analyysin suorittamista. Empiirinen tutkimus suoritettiin pääasiassa asiantuntijoiden haastattelujen ja kyselyjen avulla. Haastateltavina oli tukkureita ja loppukäyttäjiä. Kilpailutilanteen kartoittaminen perustuu lähinnä sekundääriseen tietoon, Internet-sivuihin ja myyntikonttoreiden aikaisemmin keräämään tietoon.Automaattiterästen kokonaispotentiaaliksi Euroopassa arvioitiin miljoona tonnia ja suurin osa kaupasta käydään tutkituilla markkina-alueilla. Suurimmat volyymit sijoittuvat pienemmille mitta-alueille, Æ 12 - 50 mm. Markkinoita hallitsee muutama suuri teräksen valmistaja. Imatra Steel kohtuullisen pienenä toimittajana ei pysty kilpailemaan volyymilla ja tuotevalikoimallaan suurten teräsjättien kanssa. Imatra Steelin mahdollinen strategiavaihtoehto olisi yrittää löytää ne kapeat segmentit ja markkinaraot, joilla sen tuotteet jatietotaito tuovat asiakkaalle suurimman mahdollisen hyödyn verrattuna kilpailijoihin.
Resumo:
The warp of corrugated board is the most prevalent quality problem incorrugated board industry. Nowadays corrugators provide high quality board but there often occurs a warp problem within the production of some board grades. One of the main reasons for that are the humidity and the temperature levels of the raw materials. The goal of the research is to find out howthe adjusted corrugator recipe parameters required for appropriate running of the corrugated board are repeatable for the considered board grades, how the temperature and humidity imbalances of the raw material papers influence on the warpformation of the finished board. Furthermore, the solutions for preventing warpof corrugated board are presented in the thesis.
Resumo:
Hitsattujen rakenteiden väsymiskestävyyttä pystytään parantamaan jälkikäsittelymenetelmillä, joistayksi, ultraäänikäsittely muokkaa hitsin geometriaa ja aiheuttaa puristusjäännösjännitystilan. Tässä tutkimuksessa verrataan kokeellisesti kuormaa kantamattoman hitsatun ja ui -käsitellyn rivan väsymislujuutta toisiinsa. Tutkimusohjelmaan kuuluu kahta teräslajia ja sekä vakio - että vaihtuva - amplitudista kuormitusta. Ultraäänikäsittelyllä saavutetaan väsymiskestoiän parantuminen vakio - ja vaihtuva - amplitudisella kuormituksella. Perusaineen lujuudella ei ole merkittää vaikutusta väsymislujuuteen kun liitos on hitsatussa tilassa. Tällöin väsymiskestävyyden määrää hitsin rajaviivan jännityskeskittymä. Ultraäänikäsitellyn hitsatunliitoksen väsymiskestävyys on suurempi korkeamman lujuuden omaavilla teräksillä. Tästä syystä korkealujuuksisten terästen käyttö ultraäänikäsiteltynä väsyttävästi kuormitetuissa kevytrakenteissa on perusteltua.
Resumo:
Tutkimuksen tavoitteena oli selvittää erilaisten puutuotteiden kakkoslaatujen syntyä ja niiden aiheuttamaa negatiivista tulosvaikutusta. Lisätavoitteena oli kootapuutuotteiden kakkoslaaduille toimintasuunnitelma, jonka avulla yritys voisi vähentää kakkoslaatujen syntyä sekä pienentää niiden aiheuttamaa tappiota. Yrityksen puutuotteista tutkimukseen kohteina olivat viilut, vaneritja sahatavarajalosteet. Nykytilan selvittämiseksi kerättiin tietoa yrityksen tietojärjestelmistä ja haastattelemalla useita henkilöitä eri yksiköistä. Tutkimukseen haastateltiin henkilöitä myynti-, tuotanto-, sekä kehitysosastoilta. Tietoja analysoimalla etsittiin keinoja toiminnan tehostamiseksi ja yhtenäistämiseksi yksiköiden välillä. Tutkimuksen tuloksena syntyi toimenpide-ehdotuksia ja toimintasuunnitelmia. Tulosten mukaan eri yksiköille sopivat hieman erilaiset toimintamallit. Sahatavarajalosteiden osalta merkittävimpänä keinonaolisi panostettava sopivamman raaka-aineen hankintaan kakkosten välttämiseksi. Vaneriteollisuudessa merkittävimpiä tekijöitä ovat tuotannon sitominen kakkostentehokkaampaan hyödyntämiseen, sekä myynnin ohjeistaminen joustavampiin toimitusmääriin. Viiluteollisuudessa olisi etsittävä uusia käyttökohteita alemman laadunviilulle, jonka raaka-ainetta jää nyt tuotantolaitoksilla hyödyntämättä.
Resumo:
Abstract Objective. We compared the prevalence of body weight categories between public and private schools in the Seychelles, a rapidly developing small island state in the African region. Methods. In 2004-2006, weight and height were measured and self-reported information on physical activity collected in children of three selected grades in all schools in the country. Overweight, obesity and thinness were defined according to standard criteria. Results. Based on 8 462 students (377 in private schools), the prevalence of overweight (including obesity) was markedly higher in private than public schools (boys: 37% [95% CI: 31-44] vs. 15% [14-16]; girls: 33% [26-41] vs. 20% [19-22]). The prevalence of thinness grade 1 was lower in private than public schools (boys: 9% [5-13] vs. 20% [19-21]; girls: 13% [8-18] vs. 19% [18-20]). Students in private schools reported more physical activity at leisure time while students in public schools reported larger weekly walking time. Conclusions. Our findings suggest that school type may be a useful indicator for assessing the association between socio-economic status and overweight in children, and that overweight affects wealthy children more often than others in developing countries.
Resumo:
Koneuusintojen sekä täysin uusien konelinjojen myötä SC-paperin valmistuskapasiteettia on tullut ja tulee paljon lisää 2000-luvulla. Uudistettujen sekä uusien linjojen tuottavuudet ja laatutasot ylittävät huomattavasti Myllykoski Paperin PK7:n nykyisen tason. Tämän vuoksi PK7:lla tulee pystyä valmistamaan vähemmän kilpailtuja ja jalostusarvoltaan parempia laatuja kuin mitä suurimmat SC-tuottajat valmistavat. Työn tavoitteena oli antaa vastauksia investointitarpeisiin, jos PK7:n tuotesuuntaa ollaan muuttamassa. Toisena tavoitteena oli luoda puristin- ja viiraosan vedenpoiston kannalta ajoikkuna, jossa muuttujna ovat neliömassa, paperikoneen nopeus sekä massatärkkelyksen määrä Kirjallisuusosassa tarkasteltiin SC-paperikoneen viira- ja puristinosan vedenpoistoa. PK7:n nykyisen listakenkäformerin vedenpoistokapasiteetti voi olla riittämätön nykyisellä laatutasolla ja hiokemassoilla suurempia ajonopeuksia tavoiteltaessa. Ongelmiksi voivat tulla listakengän vedenpoisto ja viiraosan jälkeinen kuiva-aine. Puristinosalla paksut lajit, alhainen kuiva-aine sekä nopea ja äkillinen vedenpoisto voivat aiheuttaa telanipissä kurausta. Kokeellisessa osassa selvitettiin raskaiden ja ohuiden neliömassojen sekä eripaperilajien mahdolliset vedenpoiston rajoitukset viira- ja puristinosalla. Formeritelan ja listakengän sekä 1. puristimen vedenpoistokapasiteetit tulivat koeajon perusteella kriittiseksi raskailla lajeilla ja suurilla massatärkkelysmäärillä, kun koneen nopeus nousi yli 1240 m/min.