Estudo do comportamento dos aços ferramentas soldados em fadiga

Sabendo-se que a fadiga é uma redução gradual da capacidade de carga do componente pela ruptura lenta e gradual do material. E que este defeito decorre do avanço infinitesimal de microtrincas, que se formam no interior do material, imperceptível a olho nu, como também é notório que a presença dos elementos de liga nos aços, propicia alterações nas propriedades metalurgias e mecânicas no material, aplicado à obra. Por outro lado, ao ser submetido a processamentos dos mais diversos, os mesmos, deformam nas zonas elásticas, plásticas e ao fim rompem-se. Ressaltando-se o objetivo deste estudo, destina se abordar as uniões soldadas, nos estágios em que ficam sujeitas a altas temperaturas e resfriam sem controle, até a temperatura ambiente. Ao fim, são solicitados por carregamentos cíclicos constantes ou alternados. Nesta particularidade, espera-se detectar mudanças estruturais profundas na Zona Termicamente Afetada – ZTA, em razão do superaquecimento sofrido, tanto na proximidade do ponto central da poça de fusão como na região localizada na vizinhança. Como não dispomos de parâmetros suficientes e necessários ao controle destas alterações, propomos analisar a ZTA da junta soldada, com a finalidade de avaliar o comportamento metalúrgico e suas implicações causadas pelas interações gás-metal. Analisar os efeitos resultantes do triangulo formado pelo material base aço AISI/SAE 4340, SAE 1020 chanfrados em V e o eletrodo revestido E-6013. A análise da estrutura será realizada pelas técnicas de ensaio metalográfico usando o método da microscopia óptica – MO o qual é de ampla difusão nas comunicações técnicas e cientificas, através das quais, distinguirão as transformações multifásicas. Transformações estas, distintas pelas transformações das austenitas diretas em martensitas sem passar pelas ferritas e perlitas. Com estas identidades, o metalógrafo pode caracterizar e predizer as reações futuras das estruturas mediante a análise das solicitações, a que possam estar submetidas. Para analisar o comportamento em fadiga dos materiais em questão, adota-se como parâmetro auxiliar, o ensaio do pêndulo de Charpy. Portanto, pelos resultados obtidos, conclui-se que as estruturas são comprometidas por tensões internas em conseqüência fragilizam, mas o procedimento de soldagem pode ser adotado, seguido de recozimento para alivio de tensões, se não fizer trincas.

Caracterização mecânica e microestrutural de um aço 4340 com estrutura multifásicas e tratamento de nitrocarbonetação a plasma

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da implantação iônica por imersão em plasma no aço ferramenta tipo H13

Pós-graduação em Engenharia Mecânica - FEG

Micromecanismos de iniciação da fratura em amostras entalhadas

Pós-graduação em Engenharia Mecânica - FEG

Sour taste and cold temperature in the oral phase of swallowing in patients after stroke

PURPOSE: To determine the effect of sour flavor and cold temperature on oral transit time during swallowing. METHODS: Participants were 52 subjects (28 male and 24 female) with ages between 50 and 80 years (median=66 years), after ischemic stroke involving right or left side damage and mild to moderate oropharyngeal dysphagia. Videofluoroscopy was performed to analyze the swallowing times. Each subject was assessed during swallowing of a paste consistency bolus offered in 5 ml spoons, with a total of four different stimuli (natural, cold, sour and sour-cold). After the exam, the oral transit time was measured using specific software. The oral transit time (starting at the beginning of the bolus movement in the mouth) and the total oral transit time (starting at the moment that the bolus is placed in the mouth) were measured. RESULTS: The association between sour and cold stimuli caused a significant decrease of oral transit time and total oral transit time. CONCLUSION: Sour flavor and cold temperature reduced oral transit time in stroke patients.

Biochemical and microbiological characteristics of in situ biofilm formed on materials containing fluoride or amorphous calcium phosphate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MICROSTRUCTURAL CHARACTERIZATION OF DUAL AND MULTIPHASE STEELS APPLIED TO AUTOMOTIVE INDUSTRY

TRIP (Transformation Induced Plasticity) and DP (Dual-Phase) steels are written in a new series of steels which present excellent mechanical properties. As for microstructure aspect, TRIP steels consist on a ferrite matrix with a second phase dispersion of other constituents, such as bainite, martensite and retained austenite, while dual-phase steels consist on martensite dispersion in a ferrite matrix. In order to identify the different microconstituents present in these materials, microstructure characterization techniques by optical microscopy (using different etchants: LePera, Heat-Tinting and Nital) and scanning electron microscopy were carried out. This being so, microstructures were correlated with mechanical properties of materials, determined by means of tensile tests. It is concluded that steels assisted by TRIP effect have a strength and elongation relation higher than the dual-phase one. With microstructure characterization, it was observed phases present in these materials microstructure.

Identification of Sudan III-(deoxy)-guanosine adducts formed in situ in a reaction with no catalyst

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermogenesis, vocalization, and temperature preference of 1-day-old chicken hatchlings after cold-exposure in late embryogenesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Second Phase Precipitation in Ultrafine-grained Ferrite Steel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A novel hybrid composite formed by reaction of 4,5-diphenyl-2-imidazolethiol with hexacyanoferrate (iii) and subsequent reaction with copper (ii): preparation, characterization and a voltammetric application for determination of l-glutatione

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Synergistic electrocatalytic effect of nanostructured mixed films formed by functionalised gold nanoparticles and bisphthalocyanines

A synergistic electrocatalytic effect was observed in sensors where two electrocatalytic materials (functionalized gold nanoparticles and lutetium bisphthalocyanine) were co-deposited using the Langmuir-Blodgett technique. Films were prepared using a novel method where water soluble functionalised gold nanoparticles [(11-mercaptoundecyl)tetra(ethylene glycol)] (SAuNPs) were inserted in floating films of lutetium bisphthalocyanine (LuPc2) and dimethyldioctadecylammonium bromide (DODAB) as the amphiphilic matrix. The formation of stable and homogeneous mixed films was confirmed by pi-A isotherms, BAM, UV-vis and Raman spectroscopy, as well as by SEM and TEM microscopy. The synergistic effect towards hydroquinone of the electrodes modified with LuPc2:DODAB/SAuNP was characterised by an increase in the intensity of the redox peaks and a reduction of the overpotential. This synergistic electrocatalytic effect arose from the interaction between the SAuNPs and the phthalocyanines that occur in the Langmuir-Blodgett films and from the high surface area provided by the nanostructured films. The sensitivity increased with the amount of LuPc2 and SAuNPs inserted in the films and limits of detection in the range of 10(-7) mol L-1 were attained. (C) 2014 Elsevier B.V. All rights reserved.

Silver colloidal nanoparticle stability: influence on Candida biofilms formed on denture acrylic

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

COMPARISON BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALLOY TI-6AL4V, COLD WORK VERSUS PROTOTIPES BY DIRECT METAL LASER SINTERING

The present work aims to study the microstructure and mechanical properties of titanium alloys, widely used in the manufacture of orthopedic implants in order to compare a new manufacturing technology of implants, rapid prototyping in metals with conventional manufacturing processes. Rapid prototyping is being used in many areas of human knowledge to assist in the study and often in the manufacture of components for their own use. Nowadays with the advancement of software and equipment such as computed tomography and magnetic resonance imaging, we can reproduce any part of the human body in three-dimensional images with great perfection and it is used in the reproduction of implants, scaffolds, material aid and preparation in surgery. This work aims to do: A comparison between the microstructure of the alloy in the two manufacturing processes (prototyping and conventional), showing the grain size, the nature, form, quantity, and distribution of various ingredients or certain inclusions and study of mechanical properties of titanium in both cases.

High activity photocatalyst powder formed by three ceramic oxides

A Photocatalyst ceramic powder that presented high photoactivity based on TiO2 modified with 25% molar of SnO2 and up to 5% molar of Ag2O was obtained in the present work. The aforementioned ceramic powder was obtained using all commercial oxides as well as the oxides mixture technique. The powders were ground in high energy mill for one hour with subsequent thermal treatment at 400°C for four hours. They were, furthermore, characterized using surface area of around 6m2/g, where the X-Ray diffraction results provided evidence for the presence of anatase and rutile phases, known to be typical characteristics of both the TiO2 and SnO2 used. During the thermal treatment, Ag2O was reduced to metallic silver. The photodegradation rehearsals were carried out using a 0.01 mmol/L Rhodamine B solution in a 100mg/L photocatalyst suspension in a 500ml beaker, which was irradiated with 4W germicide Ultraviolet light of 254nm. In addition, samples were removed after duration of about 10 minutes to an hour, where they were analyzed thoroughly in UV-vis spectrophotometer. The analysis of the results indicated that for the compositions up to 2.5% molar of Ag2O, the photoactivity was found to be greater than that of Degussa P25 photocatalyst powder, and as such it was then used as a reference. Taking into account 90% degradation of Rhodamine B, a duration period of 11 minutes was obtained for the developed photocatalyst powder compared to the 38 minutes observed for the Degussa P25. FEG-SEM micrographies enabled the verification of the morphology as well as the interaction of the oxide particles with the metallic silver, which led us to propose a model for the increase in photoactivity observed in the photocatalyst powder under investigation.