Compositional Data Analysis in Forensic Geoscience

Statistics are regularly used to make some form of comparison between trace evidence or deploy the exclusionary principle (Morgan and Bull, 2007) in forensic investigations. Trace evidence are routinely the results of particle size, chemical or modal analyses and as such constitute compositional data. The issue is that compositional data including percentages, parts per million etc. only carry relative information. This may be problematic where a comparison of percentages and other constraint/closed data is deemed a statistically valid and appropriate way to present trace evidence in a court of law. Notwithstanding an awareness of the existence of the constant sum problem since the seminal works of Pearson (1896) and Chayes (1960) and the introduction of the application of log-ratio techniques (Aitchison, 1986; Pawlowsky-Glahn and Egozcue, 2001; Pawlowsky-Glahn and Buccianti, 2011; Tolosana-Delgado and van den Boogaart, 2013) the problem that a constant sum destroys the potential independence of variances and covariances required for correlation regression analysis and empirical multivariate methods (principal component analysis, cluster analysis, discriminant analysis, canonical correlation) is all too often not acknowledged in the statistical treatment of trace evidence. Yet the need for a robust treatment of forensic trace evidence analyses is obvious. This research examines the issues and potential pitfalls for forensic investigators if the constant sum constraint is ignored in the analysis and presentation of forensic trace evidence. Forensic case studies involving particle size and mineral analyses as trace evidence are used to demonstrate the use of a compositional data approach using a centred log-ratio (clr) transformation and multivariate statistical analyses.

Mineralogy, chemistry and biological contingents of an early-middle Miocene Antarctic paleosol and its relevance as a Martian analogue

Fossil mesofauna and bacteria recovered from a paleosol in a moraine situated adjacent to the inland ice, Antarctica, and dating to the earliest glacial event in the Antarctic Dry Valleys opens several questions. The most important relates to understanding of the mineralogy and chemistry of the weathered substrate habitat in which Coleoptera apparently thrived at some point in the Early/Middle Miocene and perhaps earlier. Here, Coleoptera remains are only located in one of six horizons in a paleosol formed in moraine deposited during the alpine glacial event (> 15 Ma). A tendency for quartz to decrease upward in the section may be a detrital effect or a product of dissolution in the early stage of profile morphogenesis when climate was presumably milder and the depositing glacier of temperate type. Discontinuous distributions of smectite, laumontite, and hexahydrite may have provided nutrients and water to mesofauna and bacteria during the early stage of biotic colonization of the profile. Because the mesofauna were members of burrowing Coleoptera species, future work should assess the degree to which the organisms occupied other sites in the Dry Valleys in the past. Whereas there is no reasonable expectations of finding Coleoptera/insect remains on Mars, the chemistry and mineralogy of the paleosol is within a life expectancy window for the presence of microorganisms, principally bacteria and fungi. Thus, parameters discussed here within this Antarctic paleosol could provide an analogue to identifying similar fossil or life-bearing weathered regolith on Mars.

Coordination chemistry for information acquisition and processing

In the 21st century, information has become the most valuable resource that is available to modern societies. Thus, great efforts have been made to develop new information processing and storage techniques. Chemistry can offer a wide variety of computing paradigms that are closely related to the natural processes found in living organisms (e.g., in the nervous systems of animals). Moreover, these phenomena cannot be reproduced easily by solely using silicon-based technology. Other great advantages of molecular-scale systems include their simplicity and the diversity of interactions that occur among them. Thus, devices constructed using chemical entities may be programmed to deal with different information carriers (photons, electrons, ions, and molecules), possibly surpassing the capabilities of classic electronic circuits.

Effect of water chemistry on the physiology and toxicity assessment in Daphnia

Todos os sistemas aquáticos estão potencialmente expostos a alterações nos parâmetros da água em consequência de fenómenos ambientais tais como deposição ácida, lixiviação de iões dos solos e alterações climáticas. Dado que os parâmetros químicos da água estão geralmente correlacionados, é pertinente estudar os seus efeitos combinados para o biota aquático. Assim, o principal objetivo desta tese é avaliar a importância ecológica da variação simultânea dos principais parâmetros fisico-químicos da água nos parâmetros de história de vida dos crustáceos tanto na ausência como na presença de metais. Foram estudados os seguintes parâmetros: dureza (0.5 - 3.5 mM), alcalinidade (0.3 - 2.3 mM), pH (5.7 - 9.0) e temperatura (13 - 30ºC). A Daphnia magna foi usada como espécie modelo representando os crustáceos aquáticos. A variação simultânea da dureza e alcalinidade afetou significativamente o crescimento, reprodução e crescimento populacional de Daphnia; no entanto, os efeitos da dureza excederam os efeitos da alcalinidade. Pareceu haver interação entre a dureza e alcalinidade na reprodução dos dafnídeos, o que sugere que os efeitos da variação da dureza para Daphnia e provavelmente outros crustáceos poderão depender do nível de alcalinidade. O pH e dureza da água exerceram efeitos combinados para Daphnia, sendo os efeitos do pH mais pronunciados do que os efeitos da dureza. A diminuição do pH reduziu a sobrevivência, crescimento, reprodução, taxa de ingestão e crescimento populacional dos dafnídeos. No entanto, os efeitos do pH baixo foram mais adversos a baixa dureza, o que sugere uma interação entre estes parâmetros. Assim, a diminuição do pH em lagos de água mole pode ser um estressor determinante para os crustáceos sensíveis à acidez, ameaçando a sua sobrevivência e, consequentemente, afetando a estrutura das cadeias alimentares aquáticas. A temperatura e a química da água (dureza e alcalinidade) interagiram entre si nos parâmetros de história de vida de Daphnia; no entanto, os efeitos da temperatura excederam os efeitos da química da água. De um modo geral, temperaturas extremas reduziram o crescimento, reprodução e, consequentemente, o crescimento populacional de Daphnia. Os efeitos do aumento da temperatura foram mais adversos a baixa dureza e alcalinidade, aumentando a preocupação com os efeitos ecológicos do aquecimento global em águas moles. A dureza e alcalinidade da água também desempenharam um papel importante na toxicidade aguda e subletal (inibição da ingestão) dos metais para Daphnia. A diminuição da dureza aumentou a toxicidade aguda do zinco. Por outro lado, a diminuição da alcalinidade aumentou a toxicidade aguda e subletal do cobre, mas reduziu a toxicidade subletal do zinco, tornando evidente o importante papel da alcalinidade na toxicidade subletal dos metais para Daphnia. Globalmente, os parâmetros fisico-químicos da água parecem interagir entre si, afetando os parâmetros de história de vida e o crescimento populacional de Daphnia e também afetam a toxicidade dos metais. Em particular, a baixa dureza agrava os efeitos adversos da diminuição do pH, aumento da temperatura e toxicidade dos metais, o que aumenta a preocupação com os efeitos ecológicos da sua variação simultânea sobre os crustáceos e, portanto, sobre as cadeias alimentares aquáticas.

Genetic characterization of the South Portugal population with GlobalFilerTM Express kit - internal validation and forensic applications

Tese de mestrado. Biologia (Biologia Humana e Ambiente). Universidade de Lisboa, Faculdade de Ciências, 2014

Development of new technologies for the selective removal of volatile compounds with applications in forensic science and natural aromas

Tese de doutoramento, Farmácia (Química Farmacêutica e Terapêutica), Universidade de Lisboa, Faculdade de Farmácia, 2015

Medicinal chemistry approaches to malaria drug discovery

Tese de doutoramento, Farmácia (Química Farmacêutica e Terapêutica), Universidade de Lisboa, Faculdade de Farmácia, 2016

High field chemistry with scanning probes

Fabricating Ge and Si integrated structures with nanoscale accuracy is a challenging pursuit essential for novel advances in electronics and photonics. While several scanning probe-based techniques have been proposed, no current technique offers control of nanostructure size, shape, placement, and chemical composition. To this end, atomic force microscope direct write uses a high electric field (> 109 V m-1) to create nanoscale features as fast as 1 cm s-1 by reacting a liquid precursor with a biased AFM tip. In this work, I present the first results on fabricating inorganic nanostructures via AFM direct write. Using diphenylgermane (DPG) and diphenylsilane (DPS), carbon-free germanium and silicon nanostructures (SIMS, x-ray PEEM) are fabricated. For this chemistry, I propose a model that involves electron capture and precursor fragmentation under the high electric field. To verify this model, experimental data and simulations are presented. High field chemistry for DPG and DPS has also been demonstrated for both sequential deposition and the creation of nanoscale heterostuctures, in addition to microscale deposition using a flexible stamp approach. This high field chemistry approach to the deposition of organometallic precursors could offer a low-cost, high throughput alternative for future optical, electronic, and photovoltaic applications.

Laccase bio-grafting a versatile modification tool from green chemistry technologies

Today more than 99% of plastics are petroleum-based because of availability and cost of the raw material. The durability of these disposed plastics contributes to the environmental problems as waste and their persistence in the environment causes deleterious effects on the ecosystem. Environmental pollution awareness and the demand for green technology have drawn considerable attention of both academia and industry into biodegradable polymers. In this regard green chemistry technology has the potential to provide solution to this problematic issue. Laccase bio-grafting has recently been the focus of green chemistry technologies due to the growing environmental concerns, legal restrictions and increasing availability of scientific knowledge. In the last several years, research covering various applications of laccases has been increased rapidly particularly in the field of grafting. In principle, laccase-assisted graft co-polymerization may impart a variety of new functionalities to a polymer. The modified polymers through grafting have a bright future and their development is practically boundless. In present work, novel biodegradable graft copolymers combining the advantages of bacterial cellulose backbone and PHB side chains will be prepared by introducing enzymatic grafting technique. The present research will be a first step in the biopolymer modification. To date no report has been found in literature explaining the enzymatic grafting of PHAs. The technique would also provide an efficient modulation approach to improve the biodegradability and biocompatibility of the graft copolymer. The newly grafted copolymers will exhibit unique functionalities with wider range of potential applications mainly in tissue engineering, biosensors, pharmaceutical industry (drug delivery systems) and bio-plastics.

Occurrences of flesh flies (Diptera: Sarcophagidae) on human cadavers in Switzerland, and their importance as forensic indicators.

From 1993 to 2008, criminal investigations were conducted in the western part of Switzerland with special attention to blowfly and flesh fly species in order to estimate the post-mortem interval when requested by the police authorities. Flesh flies were found in only 33 cases out of 160. Five species of the genus Sarcophaga were identified (S. africa, S. argyrostoma, S. caerulescens, S. similis and S. sp.). The main species found on corpses (larval stage) was S. argyrostoma. The thermal constant (K) calculated for this species in Switzerland is 380.6 ± 16.3 (mean ± S.D.) degree-days. With the exception of S. caerulescens, found three times in the larval stage on corpses, the three other species are of minor forensic importance. S. argyrostoma is found during summer and indoors. This species colonises dead bodies, usually the same day as blowfly species, and it could be used to estimate the post-mortem interval. Other species are discussed in the light of current knowledge on their biology and ecology. It is recommended that voucher material be deposited in a museum, allowing further studies by relevant specialists, thereby helping investigators and avoiding misidentifications.

Validation of an analytical method for nitrous oxide (N2O) laughing gas by headspace gas chromatography coupled to mass spectrometry (HS-GC-MS): Forensic application to a lethal intoxication.

Drug abuse is a widespread problem affecting both teenagers and adults. Nitrous oxide is becoming increasingly popular as an inhalation drug, causing harmful neurological and hematological effects. Some gas chromatography-mass spectrometry (GC-MS) methods for nitrous oxide measurement have been previously described. The main drawbacks of these methods include a lack of sensitivity for forensic applications; including an inability to quantitatively determine the concentration of gas present. The following study provides a validated method using HS-GC-MS which incorporates hydrogen sulfide as a suitable internal standard allowing the quantification of nitrous oxide. Upon analysis, sample and internal standard have similar retention times and are eluted quickly from the molecular sieve 5Å PLOT capillary column and the Porabond Q column therefore providing rapid data collection whilst preserving well defined peaks. After validation, the method has been applied to a real case of N2O intoxication indicating concentrations in a mono-intoxication.

New perspectives in the use of ink evidence in forensic science: Part I. Development of a quality assurance process for forensic ink analysis by HPTLC

The level of information provided by ink evidence to the criminal and civil justice system is limited. The limitations arise from the weakness of the interpretative framework currently used, as proposed in the ASTM 1422-05 and 1789-04 on ink analysis. It is proposed to use the likelihood ratio from the Bayes theorem to interpret ink evidence. Unfortunately, when considering the analytical practices, as defined in the ASTM standards on ink analysis, it appears that current ink analytical practices do not allow for the level of reproducibility and accuracy required by a probabilistic framework. Such framework relies on the evaluation of the statistics of the ink characteristics using an ink reference database and the objective measurement of similarities between ink samples. A complete research programme was designed to (a) develop a standard methodology for analysing ink samples in a more reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in a forensic context. This report focuses on the first of the three stages. A calibration process, based on a standard dye ladder, is proposed to improve the reproducibility of ink analysis by HPTLC, when these inks are analysed at different times and/or by different examiners. The impact of this process on the variability between the repetitive analyses of ink samples in various conditions is studied. The results show significant improvements in the reproducibility of ink analysis compared to traditional calibration methods.

Sudden cardiac death in forensic medicine - Swiss recommendations for a multidisciplinary approach.

Sudden cardiac death (SCD) is by definition unexpected and cardiac in nature. The investigation is almost invariably performed by a forensic pathologist. Under these circumstances the role of the forensic pathologist is twofold: (1.) to determine rapidly and efficiently the cause and manner of death and (2.) to initiate a multidisciplinary process in order to prevent further deaths in existing family members. If the death is determined to be due to "natural" causes the district attorney in charge often refuses further examinations. However, additional examinations, i.e. extensive histopathological investigations and/or molecular genetic analyses, are necessary in many cases to clarify the cause of death. The Swiss Society of Legal Medicine created a multidisciplinary working group together with clinical and molecular geneticists and cardiologists in the hope of harmonising the approach to investigate SCD. The aim of this paper is to close the gap between the Swiss recommendations for routine forensic post-mortem cardiac examination and clinical recommendations for genetic testing of inherited cardiac diseases; this is in order to optimise the diagnostic procedures and preventive measures for living family members. The key points of the recommendations are (1.) the forensic autopsy procedure for all SCD victims under 40 years of age, (2.) the collection and storage of adequate samples for genetic testing, (3.) communication with the families, and (4.) a multidisciplinary approach including cardiogenetic counselling.