The gaseous halo of the Milky Way

In the last decade, sensitive observations have revealed that disc galaxies are surrounded by multiphase gaseous halos produced by the circulation of gas from the discs to the environment and vice-versa. This Thesis is a study of the gaseous halo of the Milky Way carried out via the modelling of the HI emission and the available absorption-line data. We fitted simple kinematical models to the HI LAB Survey and found that the Galaxy has a massive (~3x10^8 Mo) HI halo extending a few kiloparsecs above the plane. This layer rotates more slowly than the disc and shows a global inflow motion, a kinematics similar to that observed in the HI halos of nearby galaxies. We built a dynamical model of the galactic fountain to reproduce the properties of this layer. In this model, fountain clouds are ejected from the disc by SN feedback and - as suggested by hydrodynamical simulations - triggers the cooling of coronal gas, which is entrained by the cloud wakes and accretes onto the disc when the clouds fall back. For a proper choice of the parameters, the model reproduces well the HI data and predicts an accretion of coronal gas onto the disc at a rate of 2 Mo/yr. We extended this model to the warm-hot component of the halo, showing that most of the ion absorption features observed towards background sources are consistent with being produced in the turbulent wakes that lag behind the fountain clouds. Specifically, the column densities, positions, and velocities of the absorbers are well reproduced by our model. Finally, we studied the gas content of galaxies extracted from a cosmological N-body+SPH simulation, and found that an HI halo with the forementioned properties is not observed, probably due ti the relatively low resolution of the simulations.

Ottimizzazione di un motore diesel aeronautico per volo stratosferico

Studio e dimensionamento di un compressore assiale da inserire in un gruppo turbofan in cui la camera di combustione verrebbe sostituita da un motore diesel ad alte prestazioni che a sua volta andrebbe, tramite un riduttore, a trascinare il gruppo delle eliche; inoltre i gas combusti fornirebbero energia ad una turbina per il funzionamento del compressore assiale stesso.

Luminescent Ionic Transition-Metal Complexes for Light-Emitting Electrochemical Cells

The European Union set the ambitious target of reducing energy consumption by 20% within 2020. This goal demands a tremendous change in how we generate and consume energy and urgently calls for an aggressive policy on energy efficiency. Since 19% of the European electrical energy is used for lighting, considerable savings can be achieved with the development of novel and more efficient lighting systems. In this thesis, accomplished in the frame of the EU project CELLO, I report some selected goals we achieved attempting to develop highly efficient, flat, low cost and flexible light sources using Light-Emitting Electrochemical Cells (LECs), based on ionic cyclometalated iridium(III) complexes. After an extensive introduction about LECs and solid-state lighting in general, I focus on the research we carried out on cyclometalated iridium(III) complexes displaying deep-blue emission, which has turned out to be a rather challenging task. In order to demonstrate the wide versatility of this class of compounds, I also report a case in which some tailored iridium(III) complexes act as near-infrared (NIR) sources. In fact, standard NIR emitting devices are typically expensive and, also in this case, LECs could serve as low-cost alternatives in fields were NIR luminescence is crucial, such as telecommunications and bioimaging. Since LECs are based on only one active material, in the last chapter I stress the importance of an integrated approach toward the right selection of suitable emitters not only from the photophysical, but also from the point of view of material science. An iridium(III) complex, once in the device, is interacting with ionic liquids, metal cathodes, electric fields, etc. All these interactions should be taken in to account if Europe really wants to implement more efficient lighting paradigms, generating light beyond research labs.

Conductive Polymer Composites

In recent years, nanotechnologies have led to the production of materials with new and sometimes unexpected qualities through the manipulation of nanoscale components. This research aimed primarily to the study of the correlation between hierarchical structures of hybrid organic-inorganic materials such as conductive polymer composites (CPCs). Using a bottom-up methodology, we could synthesize a wide range of inorganic nanometric materials with a high degree of homogeneity and purity, such as thiol capped metal nanoparticles, stoichiometric geomimetic chrysotile nanotubes and metal dioxide nanoparticles. It was also possible to produce inorganic systems formed from the interaction between the synthesized materials. These synthesized materials and others like multiwalled carbon nanotubes and grapheme oxide were used to produce conductive polymer composites. Electrospinning causes polymer fibers to become elongated using an electric field. This technique was used to produce fibers with a nanometric diameter of a polymer blend based on two different intrinsically conducting polymers polymers (ICPs): polyaniline (PANI) and poly(3-hexylthiophene) (P3HT). Using different materials as second phase in the initial electrospun polymer fibers caused significant changes to the material hierarchical structure, leading to the creation of CPCs with modified electrical properties. Further study of the properties of these new materials resulted in a better understanding of the electrical conductivity mechanisms in these electrospun materials.

Solutions to common issues in widefield microscopy: vignetting, mosaicing and depth of focus

In this thesis we have developed solutions to common issues regarding widefield microscopes, facing the problem of the intensity inhomogeneity of an image and dealing with two strong limitations: the impossibility of acquiring either high detailed images representative of whole samples or deep 3D objects. First, we cope with the problem of the non-uniform distribution of the light signal inside a single image, named vignetting. In particular we proposed, for both light and fluorescent microscopy, non-parametric multi-image based methods, where the vignetting function is estimated directly from the sample without requiring any prior information. After getting flat-field corrected images, we studied how to fix the problem related to the limitation of the field of view of the camera, so to be able to acquire large areas at high magnification. To this purpose, we developed mosaicing techniques capable to work on-line. Starting from a set of overlapping images manually acquired, we validated a fast registration approach to accurately stitch together the images. Finally, we worked to virtually extend the field of view of the camera in the third dimension, with the purpose of reconstructing a single image completely in focus, stemming from objects having a relevant depth or being displaced in different focus planes. After studying the existing approaches for extending the depth of focus of the microscope, we proposed a general method that does not require any prior information. In order to compare the outcome of existing methods, different standard metrics are commonly used in literature. However, no metric is available to compare different methods in real cases. First, we validated a metric able to rank the methods as the Universal Quality Index does, but without needing any reference ground truth. Second, we proved that the approach we developed performs better in both synthetic and real cases.

Campi magnetici in astrofisica

Vengono descritti alcuni fenomeni legati ai campo magnetici attraverso la magnetoidrodinamica, approfondendo in particolare i modelli e le evidenze in riferimento al caso solare

Valutazione dello spostamento tridimensionale degli impianti in giovani pazienti affetti da EDs riabilitati con overdenture implanto-supportati

Ectodermal Dysplasias syndrome (EDs) are a heterogeneous group of inherited disorders characterized by dysplasia of tissues of ectodermal origin. Complete or partial anodontia are the most frequent dental findings. Prosthetic rehabilitation is recommended from functional, esthetic, and psychological points of view. Because of the anatomical abnormalities of existing teeth and alveolar ridges, conventional prosthetic rehabilitation in young patient is often difficult. Five growing patients (age 9 to 11 years) with oligo- or anodontia were prosthetically rehabilitated. Panoramic film and Cone Bean Computerized Tomography were performed and a resin model of mandibular bone was made. Despite a remarkable multi-dimensional atrophy of the alveolar bone, the insertion of two tapered implants was possible. After a submerged healing period of 2 month, the implants were exposed and abutment connection was performed. Implants were connected with an expansion bar that permits mandibular growth and prosthetic retention. A removable prosthesis was constructed with ball attachments. Mandibular growth was followed and evaluated using the expansion guide and cephalometric radiographs. Mandibular growth in sagittal and transverse direction had no adverse effects on implant position. The expansion bar permitted the undisturbed growth of the mandible. After 4.5 years of follow-up, this study showed that Implant-supported overdenture may improve oral function, phonesis and esthetics. The mandibular rotation accompanying growth had not caused a significant problem relative to the angulation and migration of the implants. Implants can be successfully placed, restored and loaded in growing EDs patients. The cephalometric analysis supported that EDs patients show midface hypoplasia with a class III tendency, which can be avoided by early rehabilitation. Thanks to the good stability and retention of the implant-supported overdenture, patients considered the prostheses as comparable to natural teeth.

Misure di rumore flicker e affidabilita nei dispositivi mosfet di potenza

L'attività di tesi consiste sia nella calibrazione di un banco di misura per analisi di rumore a basse frequenze nei dispositivi MOSFET di potenza, sia nella valutazione dei relativi e successivi dati sperimentali (con particolare attenzione anche ai processi di stress e recupero applicati ai dispositivi).

Uso di misure idrometriche satellitari per la calibrazione dei modelli numerico-idraulici: il caso del fiume Po

Questo lavoro di tesi tratta l'utilizzo di misure idrometriche satellitari in combinazione con le misure idrometriche tradizionali per la calibrazione dei modelli numerico-idraulici. Il presente elaborato riguarda la calibrazione di un complesso modello idraulico del Fiume Po implementato in HEC-RAS. Il caso di studio è un tratto del Fiume Po lungo circa 131 km, che va dalla sezione relativa alla stazione idrometrica di Borgoforte e termina all'incile del Po di Goro. Le Analisi numeriche svolte si suddividono in tre gruppi, il primo sfrutta l'impiego di soli dati idrometrici tradizionali, il secondo l'impiego di soli dati idrometrici satellitari e il terzo l'impiego di entrambe le tipologie di dati idrometrici.

La costruzione delle relazioni politiche ed economiche tra l'Italia e la Germania occidentale dopo la seconda guerra mondiale (1945-1951)

L’autore ricostruisce ed esamina la storia dei rapporti italo-tedeschi negli anni immediatamente precedenti la riapertura ufficiale delle relazioni diplomatiche tra Italia e Repubblica federale tedesca. Un riavvicinamento economico e politico progressivo, ma che suscitò forti contrasti tra i principali attori della diplomazia italiana. Il saggio si basa su una documentazione conservata presso l’Archivio storico del ministero degli Esteri, l’Archivio centrale dello Stato, l’Archivio storico della Banca d’Italia e l’Archivio Politico del ministero degli Esteri della Repubblica federale. L’autore sostiene che le relazioni economiche italo-tedesche assunsero un ruolo centrale nel processo di elaborazione della politica estera italiana sulla questione tedesca nel corso di questi anni. Prima dell’istituzione della Repubblica federale tedesca, l’Italia divenne un partner economico fondamentale per la Germania occidentale. Tra il 1945 e il 1949 l'Italia fu il primo paese europeo favorevole alla rinascita di un nuovo stato tedesco non sottoposto alla diretta influenza dell’Unione Sovietica. Il presidente del Consiglio De Gasperi e il ministro degli Esteri Sforza per sostenere la nuova Germania attuarono una precisa azione diplomatica di riavvicinamento politico, promuovendo diversi scambi di visite e di incontri con i rappresentanti tedeschi.

Sviluppo di un sistema tomografico con tubo a raggi x da 300 kv: progettazione e test preliminari.

In questo elaborato sono descritti la progettazione e lo sviluppo di un sistema tomografico con sorgente di raggi X da 300 kV per analisi nel campo dei Beni Culturali; in particolare sono stati effettuati test preliminari sia per verificare le prestazioni del tubo a raggi X e dello schermo scintillatore sia per avere indicazioni utili alla progettazione (e conseguente costruzione) del box di rivelazione. Il collaudo della sorgente di raggi X è stato eseguito con lo studio dell'andamento della dose integrale e/o del rateo di dose in funzione della tensione, della corrente e del tempo d'irraggiamento. La caratterizzazione dello schermo scintillatore di CsI(Tl) è basata sul confronto delle sue caratteristiche con uno schermo analogo di spessore differente nelle stesse condizioni sperimentali, attraverso lo studio dei parametri standard dei dispositivi per imaging, quali la curva di risposta, il rapporto segnale-rumore e la risoluzione spaziale. Inoltre, come ulteriore test, lo schermo scintillatore è stato utilizzato per l’indagine tomografica di alcuni pani di terra contenenti olle di epoca villanoviana. Per la progettazione del box rivelatore sono state invece svolte misure di tipo ottico. I vari test svolti in laboratorio hanno dato risultati positivi e hanno dimostrato la validità dei componenti scelti per il nuovo sistema tomografico, il cui assemblaggio verrà completato a breve, essendo stata ultimata proprio in queste settimane la costruzione del box di rivelazione.

Analysis and development of ecologically based approaches to coastal defense

Climate-change related impacts, notably coastal erosion, inundation and flooding from sea level rise and storms, will increase in the coming decades enhancing the risks for coastal populations. Further recourse to coastal armoring and other engineered defenses to address risk reduction will exacerbate threats to coastal ecosystems. Alternatively, protection services provided by healthy ecosystems is emerging as a key element in climate adaptation and disaster risk management. I examined two distinct approaches to coastal defense on the base of their ecological and ecosystem conservation values. First, I analyzed the role of coastal ecosystems in providing services for hazard risk reduction. The value in wave attenuation of coral reefs was quantitatively demonstrated using a meta-analysis approach. Results indicate that coral reefs can provide wave attenuation comparable to hard engineering artificial defenses and at lower costs. Conservation and restoration of existing coral reefs are cost-effective management options for disaster risk reduction. Second, I evaluated the possibility to enhance the ecological value of artificial coastal defense structures (CDS) as habitats for marine communities. I documented the suitability of CDS to support native, ecologically relevant, habitat-forming canopy algae exploring the feasibility of enhancing CDS ecological value by promoting the growth of desired species. Juveniles of Cystoseira barbata can be successfully transplanted at both natural and artificial habitats and not affected by lack of surrounding adult algal individuals nor by substratum orientation. Transplantation success was limited by biotic disturbance from macrograzers on CDS compared to natural habitats. Future work should explore the reasons behind the different ecological functioning of artificial and natural habitats unraveling the factors and mechanisms that cause it. The comprehension of the functioning of systems associated with artificial habitats is the key to allow environmental managers to identify proper mitigation options and to forecast the impact of alternative coastal development plans.

Una piattaforma collaborativa di urban-sensing basata su dispositivi android

Tesi di laurea volta a descrivere la realizzazione di un sistema che permette la condivisione dei dati dai sensori dei dispositivi android su un server centrale

Uno studio sulla criminalità organizzata: mafie etniche e imprese illecite

Lo studio è stato condotto seguendo una duplice prospettiva, che trae spunto da alcune assimilazioni operate dalla giurisprudenza italiana. Da un lato, si è cercato di capire come debbano essere interpretate norme create per la valutazione di realtà storicamente ben identificate, quali l’art. 416 bis c.p., nel momento in cui si applicano a realtà nuove, come le mafie straniere. Dall’altro lato, si è cercato di indagare i fondamenti dell’equiparazione dell’impresa che delinque al paradigma dell’associazione per delinquere, punita dall’art. 416 c.p., allorchè imprese formalmente lecite si trovano a operare per fini esclusivamente illeciti, facendo della organizzazione imprenditoriale una vera e propria organizzazione criminale. Gli obiettivi posti dalla ricerca si possono sintetizzare, dunque, nella verifica dell’adattabilità di tradizionali fattispecie criminose al nuovo contesto criminologico e nell’individuazione del confine tra l’azione occasionalmente illecita di una impresa lecita e la connotazione di una impresa come illecita tout court.