SCANNING ACOUSTIC MICROSCOPE FOR CHARACTERIZATION OF ARTERIAL PLAQUE

Unstable arterial plaque is likely the key component of atherosclerosis, a disease which is responsible for two-thirds of heart attacks and strokes, leading to approximately 1 million deaths in the United States. Ultrasound imaging is able to detect plaque but as of yet is not able to distinguish unstable plaque from stable plaque. In this work a scanning acoustic microscope (SAM) was implemented and validated as tool to measure the acoustic properties of a sample. The goal for the SAM is to be able to provide quantitative measurements of the acoustic properties of different plaque types, to understand the physical basis by which plaque may be identified acoustically. The SAM consists of a spherically focused transducer which operates in pulse-echo mode and is scanned in a 2D raster pattern over a sample. A plane wave analysis is presented which allows the impedance, attenuation and phase velocity of a sample to be de- termined from measurements of the echoes from the front and back of the sample. After the measurements, the attenuation and phase velocity were analysed to ensure that they were consistent with causality. The backscatter coefficient of the samples was obtained using the technique outlined by Chen et al [8]. The transducer used here was able to determine acoustic properties from 10-40 MHz. The results for the impedance, attenuation and phase velocity were validated for high and low-density polyethylene against published results. The plane wave approximation was validated by measuring the properties throughout the focal region and throughout a range of incidence angles from the transducer. The SAM was used to characterize a set of recipes for tissue-mimicking phantoms which demonstrate indepen- dent control over the impedance, attenuation, phase velocity and backscatter coefficient. An initial feasibility study on a human artery was performed.

Foundational Theory for Understanding Policy Routing Dynamics

In this paper we introduce a theory of policy routing dynamics based on fundamental axioms of routing update mechanisms. We develop a dynamic policy routing model (DPR) that extends the static formalism of the stable paths problem (introduced by Griffin et al.) with discrete synchronous time. DPR captures the propagation of path changes in any dynamic network irrespective of its time-varying topology. We introduce several novel structures such as causation chains, dispute fences and policy digraphs that model different aspects of routing dynamics and provide insight into how these dynamics manifest in a network. We exercise the practicality of the theoretical foundation provided by DPR with two fundamental problems: routing dynamics minimization and policy conflict detection. The dynamics minimization problem utilizes policy digraphs, that capture the dependencies in routing policies irrespective of underlying topology dynamics, to solve a graph optimization problem. This optimization problem explicitly minimizes the number of routing update messages in a dynamic network by optimally changing the path preferences of a minimal subset of nodes. The conflict detection problem, on the other hand, utilizes a theoretical result of DPR where the root cause of a causation cycle (i.e., cycle of routing update messages) can be precisely inferred as either a transient route flap or a dispute wheel (i.e., policy conflict). Using this result we develop SafetyPulse, a token-based distributed algorithm to detect policy conflicts in a dynamic network. SafetyPulse is privacy preserving, computationally efficient, and provably correct.

Principles of Safe Policy Routing Dynamics

We introduce the Dynamic Policy Routing (DPR) model that captures the propagation of route updates under arbitrary changes in topology or path preferences. DPR introduces the notion of causation chains where the route flap at one node causes a flap at the next node along the chain. Using DPR, we model the Gao-Rexford (economic) guidelines that guarantee the safety (i.e., convergence) of policy routing. We establish three principles of safe policy routing dynamics. The non-interference principle provides insight into which ASes can directly induce route changes in one another. The single cycle principle and the multi-tiered cycle principle provide insight into how cycles of routing updates can manifest in any network. We develop INTERFERENCEBEAT, a distributed algorithm that propagates a small token along causation chains to check adherence to these principles. To enhance the diagnosis power of INTERFERENCEBEAT, we model four violations of the Gao-Rexford guidelines (e.g., transiting between peers) and characterize the resulting dynamics.

A microscopic study of structural and electronic properties of functionalized silicon surfaces based on first-principles

Surface modification of silicon with organic monolayers tethered to the surface by different linkers is an important process in realizing future (opto-)electronic devices. Understanding the role played by the nature of the linking group and the chain length on the adsorption structures and electronic properties of these assemblies is vital to advance this technology. This Thesis is a study of such properties and contributes in particular to a microscopic understanding of induced changes in the work function of experimentally studied functionalized silicon surfaces. Using first-principles density functional theory (DFT), at the first step, we provide predictions for chemical trends in the work function of hydrogenated silicon (111) surfaces modified with various terminations. For nonpolar terminating atomic species such as F, Cl, Br, and I, the change in the work function is directly proportional to the amount of charge transferred from the surface, thus relating to the difference in electronegativity of the adsorbate and silicon atoms. The change is a monotonic function of coverage in this case, and the work function increases with increasing electronegativity. Polar species such as −TeH, −SeH, −SH, −OH, −NH2, −CH3, and −BH2 do not follow this trend due to the interaction of their dipole with the induced electric field at the surface. In this case, the magnitude and sign of the surface dipole moment need to be considered in addition to the bond dipole to generally describe the change in work function. Compared to hydrogenated surfaces, there is slight increase in the work function of H:Si(111)-XH, where X = Te, Se, and S, whereas reduction is observed for surfaces covered with −OH, −CH3, and −NH2. Next, we study the hydrogen passivated Si(111) surface modified with alkyl chains of the general formula H:Si–(CH2)n–CH2 and H:Si–X–(CH2)n–CH3, where X = NH, O, S and n = (0, 1, 3, 5, 7, 9, 11), at half coverage. For (X)–Hexyl and (X)–Dodecyl functionalization, we also examined various coverages up to full monolayer grafting in order to validate the result of half covered surface and the linker effect on the coverage. We find that it is necessary to take into account the van der Waals interaction between the alkyl chains. The strongest binding is for the oxygen linker, followed by S, N, and C, irrespective of chain length. The result revealed that the sequence of the stability is independent of coverage; however, linkers other than carbon can shift the optimum coverage considerably and allow further packing density. For all linkers apart from sulfur, structural properties, in particular, surface-linker-chain angles, saturate to a single value once n > 3. For sulfur, we identify three regimes, namely, n = 0–3, n = 5–7, and n = 9–11, each with its own characteristic adsorption structures. Where possible, our computational results are shown to be consistent with the available experimental data and show how the fundamental structural properties of modified Si surfaces can be controlled by the choice of linking group and chain length. Later we continue by examining the work function tuning of H:Si(111) over a range of 1.73 eV through adsorption of alkyl monolayers with general formula -[Xhead-group]-(CnH2n)-[Xtail-group], X = O(H), S(H), NH(2). The work function is practically converged at 4 carbons (8 for oxygen), for head-group functionalization. For tail-group functionalization and with both head- and tail-groups, there is an odd-even effect in the behavior of the work function, with peak-to-peak amplitudes of up to 1.7 eV in the oscillations. This behavior is explained through the orientation of the terminal-group's dipole. The shift in the work function is largest for NH2-linked and smallest for SH-linked chains and is rationalized in terms of interface dipoles. Our study reveals that the choice of the head- and/or tail-groups effectively changes the impact of the alkyl chain length on the work function tuning using self-assembled monolayers and this is an important advance in utilizing hybrid functionalized Si surfaces. Bringing together the understanding gained from studying single type functionalization of H:Si(111) with different alkyl chains and bearing in mind how to utilize head-group, tail-group or both as well as monolayer coverage, in the final part of this Thesis we study functionalized H:Si(111) with binary SAMs. Aiming at enhancing work function adjustment together with SAM stability and coverage we choose a range of terminations and linker-chains denoted as –X–(Alkyl) with X = CH3, O(H), S(H), NH(2) and investigate the stability and work function of various binary components grafted onto H:Si(111) surface. Using binary functionalization with -[NH(2)/O(H)/S(H)]-[Hexyl/Dodecyl] we show that work function can be tuned within the interval of 3.65-4.94 eV and furthermore, enhance the SAM’s stability. Although direct Si-C grafted SAMs are less favourable compared to their counterparts with O, N or S linkage, regardless of the ratio, binary functionalized alkyl monolayers with X-alkyl (X = NH, O) is always more stable than single type alkyl functionalization with the same coverage. Our results indicate that it is possible to go beyond the optimum coverage of pure alkyl functionalized SAMs (50%) by adding a linker with the correct choice of the linker. This is very important since dense packed monolayers have fewer defects and deliver higher efficiency. Our results indicate that binary anchoring can modify the charge injection and therefore bond stability while preserving the interface electronic structure.

Binding of MetJ repressor to specific and nonspecific DNA and effect of S-adenosylmethionine on these interactions.

We have used analytical ultracentrifugation to characterize the binding of the methionine repressor protein, MetJ, to synthetic oligonucleotides containing zero to five specific recognition sites, called metboxes. For all lengths of DNA studied, MetJ binds more tightly to repeats of the consensus sequence than to naturally occurring metboxes, which exhibit a variable number of deviations from the consensus. Strong cooperative binding occurs only in the presence of two or more tandem metboxes, which facilitate protein-protein contacts between adjacent MetJ dimers, but weak affinity is detected even with DNA containing zero or one metbox. The affinity of MetJ for all of the DNA sequences studied is enhanced by the addition of SAM, the known cofactor for MetJ in the cell. This effect extends to oligos containing zero or one metbox, both of which bind two MetJ dimers. In the presence of a large excess concentration of metbox DNA, the effect of cooperativity is to favor populations of DNA oligos bound by two or more MetJ dimers rather than a stochastic redistribution of the repressor onto all available metboxes. These results illustrate the dynamic range of binding affinity and repressor assembly that MetJ can exhibit with DNA and the effect of the corepressor SAM on binding to both specific and nonspecific DNA.

Large-area nanopatterning of self-assembled monolayers of alkanethiolates by interferometric lithography.

We demonstrate that interferometric lithography provides a fast, simple approach to the production of patterns in self-assembled monolayers (SAMs) with high resolution over square centimeter areas. As a proof of principle, two-beam interference patterns, formed using light from a frequency-doubled argon ion laser (244 nm), were used to pattern methyl-terminated SAMs on gold, facilitating the introduction of hydroxyl-terminated adsorbates and yielding patterns of surface free energy with a pitch of ca. 200 nm. The photopatterning of SAMs on Pd has been demonstrated for the first time, with interferometric exposure yielding patterns of surface free energy with similar features sizes to those obtained on gold. Gold nanostructures were formed by exposing SAMs to UV interference patterns and then immersing the samples in an ethanolic solution of mercaptoethylamine, which etched the metal substrate in exposed areas while unoxidized thiols acted as a resist and protected the metal from dissolution. Macroscopically extended gold nanowires were fabricated using single exposures and arrays of 66 nm gold dots at 180 nm centers were formed using orthogonal exposures in a fast, simple process. Exposure of oligo(ethylene glycol)-terminated SAMs to UV light caused photodegradation of the protein-resistant tail groups in a substrate-independent process. In contrast to many protein patterning methods, which utilize multiple steps to control surface binding, this single step process introduced aldehyde functional groups to the SAM surface at exposures as low as 0.3 J cm(-2), significantly less than the exposure required for oxidation of the thiol headgroup. Although interferometric methods rely upon a continuous gradient of exposure, it was possible to fabricate well-defined protein nanostructures by the introduction of aldehyde groups and removal of protein resistance in nanoscopic regions. Macroscopically extended, nanostructured assemblies of streptavidin were formed. Retention of functionality in the patterned materials was demonstrated by binding of biotinylated proteins.

A population model of folate-mediated one-carbon metabolism.

BACKGROUND: Previous mathematical models for hepatic and tissue one-carbon metabolism have been combined and extended to include a blood plasma compartment. We use this model to study how the concentrations of metabolites that can be measured in the plasma are related to their respective intracellular concentrations. METHODS: The model consists of a set of ordinary differential equations, one for each metabolite in each compartment, and kinetic equations for metabolism and for transport between compartments. The model was validated by comparison to a variety of experimental data such as the methionine load test and variation in folate intake. We further extended this model by introducing random and systematic variation in enzyme activity. OUTCOMES AND CONCLUSIONS: A database of 10,000 virtual individuals was generated, each with a quantitatively different one-carbon metabolism. Our population has distributions of folate and homocysteine in the plasma and tissues that are similar to those found in the NHANES data. The model reproduces many other sets of clinical data. We show that tissue and plasma folate is highly correlated, but liver and plasma folate much less so. Oxidative stress increases the plasma S-adenosylmethionine/S-adenosylhomocysteine (SAM/SAH) ratio. We show that many relationships among variables are nonlinear and in many cases we provide explanations. Sampling of subpopulations produces dramatically different apparent associations among variables. The model can be used to simulate populations with polymorphisms in genes for folate metabolism and variations in dietary input.

Investigação das habilidades e competências estatísticas de estudantes recém-ingressos em uma universidade pública brasileira

Educadores e pesquisadores, em âmbito internacional, vêm consolidando um campo de estudo a Educação Estatística. Suas principais discussões elucidam a importância da Estatística nas diversas áreas de conhecimento, em contraste à incompreensão de seu ensino descontextualizado e focado em cálculos. Para retratar essa realidade delineou-se essa pesquisa, com objetivo de identificar as habilidades e competências, atinentes ao Letramento Estatístico. Aplicou-se um instrumento com 20 itens em uma amostra de 200 estudantes. Ao realizar a análise de dados constatou-se que apresentaram mais habilidades para fazer inferências a partir de informações expressas em gráficos e para calcular medidas estatísticas. Já suas habilidades para resolver situações problemas e interpretar medidas estatísticas, são menores. A partir dessa pequisa, pode-se observar que as competências esperadas ainda não são plenamente contempladas, justificando a continuidade das pesquisas a fim de diagnosticar e nortear ações na Educação Estatística.

Proyectos de aprendizaje en la enseñanza de la estadística

Para que el aprendizaje ocurra, es necesario que los estudiantes se unen momentos de exploración, al realizar experimentos contextualizados en el mundo físico, con momentos de reflexión. En este sentido, el objetivo de este taller es presentar proyectos de aprendizaje como una alternativa pedagógica para promover la construcción del conocimiento estadístico de los estudiantes. En primer lugar, vamos a abordar la forma de desarrollar proyectos de aprendizaje en la enseñanza de estadística. Para orientar las acciones futuras de los participantes, se presentarán las estrategias metodológicas que ya se aplican en la conducción del desarrollo de proyectos de aprendizaje en la enseñanza de la estadística en los cursos de licenciatura en diversas áreas del conocimiento en Brasil.

Application of CFD in vacuum dezincing process

Most lead bullion is refined by pyrometallurgical methods - this involves a serics of processes that remove the antimony (softening) silver (Parkes process), zinc (vacuum dezincing) and if need be, bismuth (Betterton-Kroll process). The first step, softening, removes the antimony, arsenic and tin by air oxidation in a furnace or by the Harris process. Next, in the Parkes process, zinc is added to the melt to remove the silver and gold. Insoluble zinc, silver and gold compounds are skimmed off from the melt surface. Excess zinc added during desilvering is removed from lead bullion using one of ghree methods: * Vacuum dezincing; * Chlorine dezincing; or * Harris dezincing. The present study concentrates on the Vacuum dezincing process for lead refining. The main aims of the research are to develop mathematical model(s), using Computational Fluid Dyanmics (CFD) a Surface Averaged Model (SAM), to predict the process behaviour under various operating conditions, thus providing detailed information of the process - insight into its reaction to changes of key operating parameters. Finally, the model will be used to optimise the process in terms of initial feed concentration, temperature, vacuum height cooling rate, etc.

LibQUAL+ Survey 2004 @ Queen's University Library : analysis of results

Queen's University Library was one of 202 libraries, including 57 members of the Association of Research Libraries (ARL), to survey its users in spring 2004 using the LibQUAL+ survey instrument. LibQUAL+ was designed by ARL to assist libraries in assessing the quality of their services and identifying areas for improvement. # Overall: Queen's scored higher than the average for all ARL participants and 1st among the 2004 Canadian participants. This relatively high rating is due to very high scores in the dimensions of Library as Place and Affect of Service. However, there is considerable need for improvement in the area of Information Control where Queen's rated well below the ARL average. # Affect of Service: Queen's strong overall ratings are supported by the many respondent comments praising customer service throughout the system. The ratings and survey comments indicate greatest appreciation by faculty and more experienced students (e.g. graduate students) for the instruction and on-site services provided by the libraries. The ratings also indicate that undergraduates, growing up with the web, want and expected to be able to access library resources independently and do not value these services as highly. The comments also indicated some specific areas for improvement throughout the library system. # Library as Place : All Queen's libraries except for Law ranked well above the ARL and Canadian averages. Overall, Library as Place ranked lowest in importance among the service dimensions for all ARL participants including Queen's. Comparative analysis of LibQUAL results since the survey began shows a decline in “desired” ratings for Library as Place. However, undergraduates continue to give strong "desired" ratings to certain aspects of Library as Place and a relatively high rating for "minimum expected" service. The comments from Queen's survey respondents and ARL's analyses of focus groups indicate that undergraduates value the library much more as a place to study and work with peers rather than for its on-site resources and services. # Information Control: This is the area in greatest need of attention. While it ranked highest in importance for all user groups by a wide margin, Queen's performed poorly in this category. Overall, Queen's ranked far below both the ARL average and the top three Canadian scores. However, the major dissatisfaction was concentrated in the humanities/social sciences (Stauffer primary users) and the health sciences (Bracken primary users) where the overall rating of perceived service quality ranked below the minimum expected service rating. Primary users of the Education, Engineering/Science and Law libraries rated this service dimension higher than the ARL average. The great success of the Canadian National Site License Program (CNSLP) is reflected in the high overall rating generated by Engineering/Science Library users. The low ratings from the humanities and social sciences are supported by respondents' comments and are generally consistent with other ARL participants.

LibQUAL+ Survey 2007 at Queen’s University Library: Analysis of Results

Analysis of 2007 LibQUAL+ results from the survey conducted by Queen's University in February 2007.

2007 LibQUAL+™ Survey @ Queen's: Findings and Actions

Summary of the finding from the 2007 Queen's LibQUAL+ survey and action items developed by the Library.