Automated analysis of lidocaine and its metabolite in plasma by in-tube solid-phase microextraction coupled with LC-UV for pharmacokinetic study

A sensitive, selective, and reproducible in-tube solid-phase microextraction and liquid chromatographic (in-tube SPME/LC-UV) method for determination of lidocaine and its metabolite monoethylglycinexylidide (MEGX) in human plasma has been developed, validated, and further applied to pharmacokinetic study in pregnant women with gestational diabetes mellitus (GDM) subjected to epidural anesthesia. Important factors in the optimization of in-tube SPME performance are discussed, including the draw/eject sample volume, draw/eject cycle number, draw/eject flow rate, sample pH, and influence of plasma proteins. The limits of quantification of the in-tube SPME/LC method were 50 ng/mL for both metabolite and lidocaine. The interday and intraday precision had coefficients of variation lower than 8%, and accuracy ranged from 95 to 117%. The response of the in-tube SPME/LC method for analytes was linear over a dynamic range from 50 to 5000 ng/mL, with correlation coefficients higher than 0.9976. The developed in-tube SPME/LC method was successfully used to analyze lidocaine and its metabolite in plasma samples from pregnant women with GDM subjected to epidural anesthesia for pharmacokinetic study.

Assessment of the stereoselective fungal biotransformation of albendazole and its analysis by HPLC in polar organic mode

A high-performance liquid chromatographic method using polar organic mode was developed to analyze albendazole (ABZ), albendazole sulfone (ABZSO(2)) and the chiral and active metabolite albendazole sulfoxide (ABZSOX, ricobendazole) that was further applied in stereoselective fungal biotransformation studies. The chromatographic separation was performed on a Chiralpak AS column using acetonitrile:ethanol (97:3, v/v) plus 0.2% triethylamine and 0.2% acetic acid as the mobile phase at a flow rate of 0.5 mL min(-1). The present study employed hollow fiber liquid-phase microextraction as sample preparation. The method showed to be linear over the concentration range of 25-5000 ng mL(-1) for each ABZSOX enantiomer, 200-10,000 ng mL(-1) for ABZ and 50-1000 ng mL(-1) for ABZSO(2) metabolite with correlation coefficient (r)> 0.9934. The mean recoveries for ABZ, rac-ABZSOX and ABZSO(2) were, respectively, 9%, 33% and 20% with relative standard deviation below 10%. Within-day and between-day precision and accuracy assays for these analytes were studied at three concentration levels and were lower than 15%. This study opens the door regarding the possibility of using fungi in obtaining of the active metabolite ricobendazole. Nigrospora sphaerica (Sacc.) E. W. Mason (5567), Pestalotiopsis foedans (VR8), Papulaspora immersa Hotson (SS13) and Mucor rouxii were able to stereoselectively metabolize ABZ into its chiral metabolite. Among them, the fungus Mucor rouxii was the most efficient in the production of (+)-ABZSOX. (C) 2011 Elsevier B.V. All rights reserved.

2-Acetylpyridine- and 2-benzoylpyridine-derived hydrazones and their gallium(III) complexes are highly cytotoxic to glioma cells

2-Acetylpyridine-phenylhydrazone (H2AcPh), its para-chlorophenylhydrazone (H2AcpClPh) and para-nitrophenylhydrazone (H2AcpNO(2)Ph) analogues, the corresponding 2-benzoylpyridine-derived hydrazones (H2BzPh, H2BzpClPh and H2BzpNO(2)Ph) and their gallium(III) complexes were assayed for their cytotoxic activity against U87 (expressing wild-type p53 protein) and T98 (expressing mutant p53 protein) glioma cells. IC50 values against both glioma cells and against the MRC5 (human fetal lung fibroblast) lineage were obtained for the hydrazones, but not for their gallium(III) complexes, due to their low solubility. Hydrazones were highly cytotoxic at nanomolar doses against U87 and T98 cells. The therapeutic indexes (TI = IC50MRC5/IC50glioma) were 2-660 for T98 cells and 28-5000 for U87 cells, indicating that the studied hydrazones could be good antitumor drug candidates to treat brain tumors. (C) 2012 Elsevier Masson SAS. All rights reserved.

Population size of threatened and endemic birds of the Cerrado in Estacao Ecologica de Itirapina, a fragmented area in the State of Sao Paulo, Brazil

The pressures for land use change have led to an increasing isolation of habitat remnants throughout the world. The goal of this study was to estimate the population size and density of some endemic and threatened species in a nature reserve in the Cerrado biome. One hundred and thirty four point transects were undertaken at the Estacao Ecologica de Itirapina (EEI), one of the last natural grassland savannah remnants in Sao Paulo state, in the south-east of Brazil between September and December 2006 and densities estimated for seven species (four endemic to the Cerrado, one near-endemic and two grassland specialists). Neither species reached the minimum viable population size of 500-5000 individuals. Four species, White-banded Tanager, White-rumped Tanager, Black-throated Saltator and Sharp-tailed Tyrant have populations ranging from 112 to 248 individuals, while the other species have a low population (< 60 individuals). The mean densities of Sharp-tailed Tyrant and Cock-tailed Tyrant in the EEI grassland showed similar values to those observed in larger areas of the Cerrado, which may indicate that the EEL grassland area is well conserved. In spite of the restricted size of the EEI, small areas can maintain some endemic and threatened bird populations, thus contributing to local biodiversity and the ecological processes in the region. The capacity of fragments of Cerrado (similar to 2,000 ha) to maintain populations of endemic and threatened bird species is unlikely to be effective in the long term.

Tailored norbornene-based copolymer with systematic variation of norbornadiene as a crosslinker obtained via ROMP with alternative amine Ru catalysts

Copolymers of norbornene (NBE) with norbomadiene (NBD) were obtained via ROMP with [RuCl2(PPh3)(2)(L)] type complexes as initiators (1 for L = piperidine and 2 for L = 3,5-Me(2)piperidine). The reactions were performed using a fixed quantity of NBE (5000 equivalents/[Ru]) for different concentrations of NBD (500, 1000, 1500 and 2000 equivalents/ [Ru]) in CHCl3, initiated with ethyl diazoacetate at room temperature. The presence of NBD in the NBE chains was characterized by H-1 and C-13 NMR. Whereas the copolymer microstructure was influenced neither by the NBD quantity nor by the initiator type, the N-n and PDI values were improved when increasing the NBD quantity in the medium. When raising the NBD amount, DMA results indicated increased cross-linking with increasing T-g and E ' storage modulus, as well as the fact that SEM micrographs indicated decreased pore sizes in the porous isolated copolymers. (C) 2011 Elsevier Ltd. All rights reserved.

Swelling tests on material from the Guabirotuba Formation, Parana, Brazil, with suction control

This paper presents the swelling behaviour of clayey materials under controlled suction imposed both by a Richards chamber and by controlling the relative humidity with concentrated saline solutions. Soil-water characteristic curves (matrix and total) were determined by the filter paper method. The materials under study belong to the Guabirotuba Formation, of Pleistocene age, in the Curitiba Basin in the state of Parana, southern Brazil. Materials under several stages of suction of 5000-40 000 kPa were subjected to swelling tests in an oedometer press. The results indicated that the greater the suction the higher the swelling pressure. However, when swelling tests were carried out with suction variation controlled by relative humidity, in which the increase in moisture was very slow, the samples showed no swelling.

Impact of different fluoride concentrations and pH of dentifrices on tooth erosion/abrasion in vitro

Background: This in vitro study analysed the effect of different fluoride concentrations in acidic or neutral liquid dentifrices in protecting enamel and dentine from erosive and abrasive wear. Methods: Bovine enamel and dentine specimens (n = 132) were randomly allocated to 11 groups (each n = 12): experimental liquid dentifrices with 550 ppm F, 1100 ppm F, 5000 ppm F or 0 ppm F/placebo (each at pH 4.5 and pH 7.0); and commercial dentifrices with 550 ppm F (Colgate Baby, pH 7.0), 1100 ppm F (Crest, pH 7.0) and 5000 ppm F (Duraphat, pH 7.0). The specimens were subjected to erosion for 90 seconds, 4 times/day, over 7 days. Immediately after the first and last erosion, the specimens were brushed for 15 seconds using one of the dentifrices. Tooth wear was measured profilometrically (lm) and analysed by ANOVA (p < 0.05). Results: All fluoridated liquid dentifrices significantly reduced enamel wear compared to the placebo and commercial dentifrices. Only liquid dentifrices with 1100 and 5000 ppm F significantly reduced dentine wear compared to placebo dentifrice. The pH had no effect, but the consistency had a significant impact on the effect of dentifrices. Conclusions: Liquid dentifrices with high F concentration appear to be a good option to prevent tooth wear

Hydroxocobalamin quantification in human plasma by high-performance liquid chromatography coupled with electrospray tandem mass spectrometry in a pharmacokinetic study

A rapid, sensitive and specific method for quantifying hydroxocobalamin in human plasma using paracetamol as the internal standard (IS) is described. The analyte and the IS were extracted from plasma by liquid-liquid extraction using an organic solvent (ethanol 100%; -20°C). The extracts were analyzed by high performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC-MS-MS). Chromatography was performed on Prevail C8 3 μm, analytical column (2.1×100 mm i.d.). The method had a chromatographic run time of 3.4 min and a linear calibration curve over the range 5-400 ng.mL-1 (r>0.9983). The limit of quantification was 5 ng.mL-1. The method was also validated without the use of the internal standard. The precision in the intra-batch validation with IS was 9.6%, 8.9%, 1.0% and 2.8% whereas without IS was 9.2%, 8.2%, 1.8% and 1.5% for 5, 15, 80 and 320 ng/mL, respectively. The accuracy in intra-batch validation with IS was 108.9%, 99.9%, 98.9% and 99.0% whereas without IS was 101.1%, 99.3%, 97.5% and 92.5% for 5, 15, 80 and 320 ng/mL, respectively. The precision in the inter-batch validation with IS was 9.4%, 6.9%, 4.6% and 5.5% whereas without IS was 10.9%, 6.4%, 5.0% and 6.2% for 5, 15, 80 and 320 ng/mL, respectively. The accuracy in inter-batch validation with IS was 101.9%, 104.1%, 103.2% and 99.7% whereas without IS was 94.4%, 101.2%, 101.6% and 96.0% for 5, 15, 80 and 320 ng/mL, respectively. This HPLC-MS-MS procedure was used to assess the pharmacokinetics of Hydroxo cobalamin following intramuscular injection 5000 μg in healthy volunteers of both sexes (10 males and 10 females). The volunteers had the following clinical characteristics (according to gender and expressed as mean ± SD [range]): males: age: 32.40 ± 8.00 y [23.00-46.00], height: 1.73 ± 0.07 m [1.62-1.85], body weight: 72.48 ± 10.22 Kg [60.20- 88.00]; females: age: 28.60 ± 9.54 y [18.00-44.00], height: 1.60 ± 0.05 m [1.54-1.70], body weight: 58.64 ± 6.09 Kg [51.70- 66.70]. The following pharmacokinetic parameters were obtained from the hydroxocobalamin plasma concentration vs. time curves: AUClast, T1/2, Tmax, Vd, Cl, Cmax and Clast. The pharmacokinetic parameters were 120 (± 25) ng/mL for Cmax, 2044 (± 641) ng.h/mL for AUClast, 8 (± 3.2) ng.mL-1 for Clast, 38 (± 15.8) hr for T1/2 and 2.5 (range 1-6) hr for Tmax. Female volunteers presented significant (p=0.0136) lower AUC (1706 ± 704) ng.h/mL) and larger (p=0.0205) clearance (2.91 ± 1.41 L/hr), as compared to male 2383 ± 343 ng.h/mL and 1.76 ± 0.23 L/hr, respectively. These pharmacokinetic differences could explain the higher prevalence of vitamin B12 deficiency in female patients. The method described validated well without the use of the internal standard and this approach should be investigated in other HPLC-MS-MS methods.

Stopping power and depth dose profile of H+ and He+ ion beams in hydroxyapatite thin films.

Hadron therapy is a promising technique to treat deep-seated tumors. For an accurate treatment planning, the energy deposition in the soft and hard human tissue must be well known. Water has been usually employed as a phantom of soft tissues, but other biomaterials, such as hydroxyapatite (HAp), used as bone substitute, are also relevant as a phantom for hard tissues. The stopping power of HAp for H+ and He+ beams has been studied experimentally and theoretically. The measurements have been done using the Rutherford backscattering technique in an energy range of 450-2000 keV for H+ and of 400-5000 keV for He+ projectiles. The theoretical calculations are based in the dielectric formulation together with the MELF-GOS (Mermin Energy-Loss Function – Generalized Oscillator Strengths) method [1] to describe the target excitation spectrum. A quite good agreement between the experimental data and the theoretical results has been found. The depth dose profile of H+ and He+ ion beams in HAp has been simulated by the SEICS (Simulation of Energetic Ions and Clusters through Solids) code [2], which incorporates the electronic stopping force due to the energy loss by collisions with the target electrons, including fluctuations due to the energy-loss straggling, the multiple elastic scattering with the target nuclei, with their corresponding nuclear energy loss, and the dynamical charge-exchange processes in the projectile charge state. The energy deposition by H+ and He+ as a function of the depth are compared, at several projectile energies, for HAp and liquid water, showing important differences.

Erythropoietin treatment elevates haemoglobin concentration by increasing red cell volume and depressing plasma volume

[EN] Erythropoietin (Epo) has been suggested to affect plasma volume, and would thereby possess a mechanism apart from erythropoiesis to increase arterial oxygen content. This, and potential underlying mechanisms, were tested in eight healthy subjects receiving 5000 IU recombinant human Epo (rHuEpo) for 15 weeks at a dose frequency aimed to increase and maintain haematocrit at approximately 50%. Red blood cell volume was increased from 2933 +/- 402 ml before rHuEpo treatment to 3210 +/- 356 (P < 0.01), 3117 +/- 554 (P < 0.05), and 3172 +/- 561 ml (P < 0.01) after 5, 11 and 13 weeks, respectively. This was accompanied by a decrease in plasma volume from 3645 +/- 538 ml before rHuEpo treatment to 3267 +/- 333 (P < 0.01), 3119 +/- 499 (P < 0.05), and 3323 +/- 521 ml (P < 0.01) after 5, 11 and 13 weeks, respectively. Concomitantly, plasma renin activity and aldosterone concentration were reduced. This maintained blood volume relatively unchanged, with a slight transient decrease at week 11, such that blood volume was 6578 +/- 839 ml before rHuEpo treatment, and 6477 +/- 573 (NS), 6236 +/- 908 (P < 0.05), and 6495 +/- 935 ml (NS), after 5, 11 and 13 weeks of treatment. We conclude that Epo treatment in healthy humans induces an elevation in haemoglobin concentration by two mechanisms: (i) an increase in red cell volume; and (ii) a decrease in plasma volume, which is probably mediated by a downregulation of the rennin-angiotensin-aldosterone axis. Since the relative contribution of plasma volume changes to the increments in arterial oxygen content was between 37.9 and 53.9% during the study period, this mechanism seems as important for increasing arterial oxygen content as the well-known erythropoietic effect of Epo.

Modellazione e simulazione di sistemi meccanici ad elevato numero di gradi di libertà mediante metodi non convenzionali e sistemi CAD

Recent developments in piston engine technology have increased performance in a very significant way. Diesel turbocharged/turbo compound engines, fuelled by jet fuels, have great performances. The focal point of this thesis is the transformation of the FIAT 1900 jtd diesel common rail engine for the installation on general aviation aircrafts like the CESSNA 172. All considerations about the diesel engine are supported by the studies that have taken place in the laboratories of the II Faculty of Engineering in Forlì. This work, mostly experimental, concerns the transformation of the automotive FIAT 1900 jtd – 4 cylinders – turbocharged – diesel common rail into an aircraft engine. The design philosophy of the aluminium alloy basement of the spark ignition engine have been transferred to the diesel version while the pistons and the head of the FIAT 1900 jtd are kept in the aircraft engine. Different solutions have been examined in this work. A first V 90° cylinders version that can develop up to 300 CV and whose weight is 30 kg, without auxiliaries and turbocharging group. The second version is a development of e original version of the diesel 1900 cc engine with an optimized crankshaft, that employ a special steel, 300M, and that is verified for the aircraft requirements. Another version with an augmented stroke and with a total displacement of 2500 cc has been examined; the result is a 30% engine heavier. The last version proposed is a 1600 cc diesel engine that work at 5000 rpm, with a reduced stroke and capable of more than 200 CV; it was inspired to the Yamaha R1 motorcycle engine. The diesel aircraft engine design keeps the bore of 82 mm, while the stroke is reduced to 64.6 mm, so the engine size is reduced along with weight. The basement weight, in GD AlSi 9 MgMn alloy, is 8,5 kg. Crankshaft, rods and accessories have been redesigned to comply to aircraft standards. The result is that the overall size is increased of only the 8% when referred to the Yamaha engine spark ignition version, while the basement weight increases of 53 %, even if the bore of the diesel version is 11% lager. The original FIAT 1900 jtd piston has been slightly modified with the combustion chamber reworked to the compression ratio of 15:1. The material adopted for the piston is the aluminium alloy A390.0-T5 commonly used in the automotive field. The piston weight is 0,5 kg for the diesel engine. The crankshaft is verified to torsional vibrations according to the Lloyd register of shipping requirements. The 300M special steel crankshaft total weight is of 14,5 kg. The result reached is a very small and light engine that may be certified for general aviation: the engine weight, without the supercharger, air inlet assembly, auxiliary generators and high pressure body, is 44,7 kg and the total engine weight, with enlightened HP pump body and the titanium alloy turbocharger is less than 100 kg, the total displacement is 1365 cm3 and the estimated output power is 220 CV. The direct conversion of automotive piston engine to aircrafts pays too huge weight penalties. In fact the main aircraft requirement is to optimize the power to weight ratio in order to obtain compact and fast engines for aeronautical use: this 1600 common rail diesel engine version demonstrates that these results can be reached.

Applicazione della tecnica PsinSAR™ allo studio di fenomeni franosi lenti: casi di studio in Emilia-Romagna

La mia tesi dal titolo ”Applicazione della tecnica PSinSAR™ allo studio di fenomeni franosi lenti: casi di studio in Emilia-Romagna” ha avuto come obiettivo quello di mostrare le potenzialità e i limiti della tecnica PSinSAR nel monitoraggio di fenomeni franosi localizzati in Val Marecchia. Ho svolto, nel capitolo due, un’analisi preliminare dell’area di studio andando a evidenziare prima le caratteristiche climatiche, piogge medie annue e le temperature minime e massime, e a seguire sono passato a descrivere l’inquadramento geologico e geomorfologico. L’area della Val Marecchia è, da questo punto di vista, molto particolare poggiando su quella che è definita dagli autori “coltre della Val Marecchia”; essa è un complesso alloctono sovrascorso ai terreni autoctoni della successione Umbro – Romagnola - Marchigiana. La traslazione verso Est della coltre avvenne per "scatti", in funzione delle principali fasi tettoniche appenniniche, separati da momenti di pausa in cui sedimentarono le formazioni più recenti le quali poi si spostarono in modo solidale con la coltre. La coltre, infatti, è costituita da un insieme di formazioni di età diverse e in particolare ritroviamo, partendo da quella più antica l’unità ligure, l’unità subligure e infine l’unità epiligure. La presenza di formazioni più recenti sopra ad altre più antiche rende unica la morfologia della vallata con enormi blocchi rocciosi poggianti su un substrato in genere argilloso come nell’esempio più famoso della rupe di San Leo. Da queste analisi è emersa un’altra caratteristica peculiare della valle cioè la forte tendenza a essere interessata da dissesti di varie tipologie. Gli indici di franosità mostrano che nella zona alta della vallata circa il 50% del territorio è interessato da dissesti, valore che decresce leggermente nella parte media e bassa della valle. Il motivo di tale instabilità è da imputare in parte alla forte erosione che avviene sulle placche epiliguri e in parte alle caratteristiche scadenti del substrato che è per lo più composto di argille e arenarie. Per quanto riguarda le tipologie di frane in Val Marecchia la situazione è molto eterogenea; in particolari le tre tipologie più frequenti sono il colamento lento, lo scivolamento rotazionale/traslativo e le frane di tipo complesso. Nel terzo capitolo ho descritto la tecnica PSinSAR; essa si basa sull’elaborazione di scene riprese da satellite per giungere alla formazione di una rete di punti, i PS, di cui conosciamo i movimenti nel tempo. I Permanent Scatterer (PS) sono dei bersagli radar individuati sulla superficie terrestre dal sensori satellitari caratterizzati per il fatto di possedere un’elevata stabilità nel tempo alla risposta elettromagnetica. I PS nella maggior parte dei casi corrispondono a manufatti presenti sulla superficie quali edifici, monumenti, strade, antenne e tralicci oppure ad elementi naturali come per esempio rocce esposte o accumuli di detrito. Lo spostamento viene calcolato lungo la linea di vista del satellite, per cui il dato in uscita non mostra lo spostamento effettivo del terreno, ma l'allontanamento o l'avvicinamento del punto rispetto al satellite. La misure sono sempre differenziali, ovvero sono riferite spazialmente a un punto noto a terra chiamato reference point, mentre temporalmente alla data di acquisizione della prima immagine. La tecnica PSinSAR proprio per la sua natura è "cieca" rispetto ai movimenti in direzione Nord-Sud. Le scene utilizzate per la creazione dei dataset di PS derivano quasi interamente dai satelliti ERS e ENVISAT. Tuttora sono disponibili anche le scene dei satelliti TerraSAR-X, RADARSAT e Cosmo Skymed. I sensori utilizzati in questo ambito sono i SAR (Synthetic Aperture Radar) che sono sensori attivi, cioè emettono loro stessi l'energia necessaria per investigare la superficie terrestre al contrario dei sensori ottici. Questo permette di poter acquisire scene anche di notte e in condizioni di cielo nuvoloso. La tecnica PSinSAR presenta molti vantaggi rispetto alle tecniche interferometriche tradizionali essa, infatti, è immune agli errori di decorrelamento temporale e spaziale oltre agli errori atmosferici, che portavano ad avere precisioni non inferiori a qualche cm, mentre ora l’errore di misura sulla velocità media di spostamento si attesta in genere sui 2 mm. La precisione che si ha nella georeferenziazione dei punti è in genere di circa 4-7 m lungo la direzione Est e circa 1-2 m in quella Nord. L’evoluzione di PSinSAR, SqueeSAR, permette un numero maggiore di punti poiché oltre ai Permanent Scatterers PS, tramite un apposito algoritmo, calcola anche i Distribuited Scatterer DS. I dataset di dati PS che ho utilizzato nel mio lavoro di tesi (PSinSAR) derivano, come detto in precedenza, sia da scene riprese dal satellite ERS che da ENVISAT nelle due modalità ascendenti e discendenti; nel primo caso si hanno informazioni sui movimenti avvenuti tra il 1992 e il 2000 mentre per l’ENVISAT tra il 2002 e il 2008. La presenza di dati PS nelle due modalità di ripresa sulla stessa zona permette tramite alcuni calcoli di ricavare la direzione effettiva di spostamento. È importante però sottolineare che, a seconda della modalità di ripresa, alcune aree possono risultare in ombra, per questo nell’analisi dei vari casi di studio non sempre sono stati utilizzabili tutti i dataset. Per l'analisi dei vari casi di studio, presentati nel capitolo 4, ho utilizzato diverso materiale cartografico. In particolare mi sono servito delle Carte Tecniche Regionali (CTR) a scala 1:10000 e 1:5000, in formato digitale, come base cartografica. Sempre in formato digitale ho utilizzato anche le carte geologiche e geomorfologiche dell'area della Val Marecchia (fogli 266, 267, 278) oltre, per finire, agli shapefile presi dal database online del Piano stralcio dell’Assetto Idrogeologico PAI. Il software usato per la realizzazione del lavoro di tesi è stato ArcGIS di proprietà di ESRI. Per ogni caso di studio ho per prima cosa effettuato un'analisi dal punto di vista geologico e geomorfologico, in modo da fare un quadro delle formazioni presenti oltre ad eventuali fenomeni franosi mostrati dalle carte. A seguire ho svolto un confronto fra il dato PS, e quindi i valori di spostamento, e la perimetrazione mostrata nel PAI. Per alcuni casi di studio il dato PS ha mostrato movimenti in aree già perimetrate nel PAI come "in dissesto", mentre in altri il dato satellitare ha permesso di venire a conoscenza di fenomeni non conosciuti (come ad esempio nel caso di Monte Gregorio). Per ogni caso di studio ho inoltre scelto alcuni PS caratteristici (solitamente quelli a coerenza maggiore) e ho ricavato la relativa serie storica. In questo modo è stato possibile verificare lo spostamento durante tutti gli anni in cui sono state prese le scene (dal 1992 al 2000 per dati ERS, dal 2002 al 2008 per dati ENVISAT) potendo quindi mettere in luce accelerazioni o assestamenti dei fenomeni nel tempo, oltre a escludere la presenza di trend di spostamento anomali imputabili nella maggior parte dei casi a errori nel dato. L’obiettivo della tesi è stato da una parte di verificare la bontà del dato PS nell’interpretazione dei movimenti dovuti a dissesti franosi e dall’altra di fare un confronto tra il dato di spostamento ricavato dai PS e i vari inventari o carte di piano. Da questo confronto sono emerse informazioni molti interessanti perché è stato possibile avere conferme di movimento su dissesti già conosciuti (Sant’Agata Feltria, San Leo e altri) ma anche di venire a conoscenza di fenomeni non conosciuti (Monte Gregorio). In conclusione è emerso dal mio lavoro che il monitoraggio tramite tecnica PSinSAR necessita di essere integrato con le tecniche tradizionali poiché presenta alcune limitazioni importanti come l’impossibilità di "vedere" movimenti veloci o lungo la direzione Nord-Sud, oltre ad avere dati in aree vegetate o scarsamente abitate. I vantaggi sono però notevoli potendo monitorare con un’unica ripresa vaste porzioni di territorio oltre ad avere serie storiche consistenti, in grado di evidenziare i movimenti avvenuti nel passato. Tale tecnica quindi, secondo il mio parere, può essere utilizzata come supporto alla stesura di cartografia di fenomeni franosi fornendo informazioni aggiuntive rispetto alle varie tecniche tradizionali come il GPS, sondaggi geotecnici e sondaggi inclinometrici.

Trend- und Natursport als System

Zusammenfassung: Freizeitaktivitäten wie Mountainbiking, Sportklettern, Drachen- und Gleitschirmfliegen oder Windsur-fen sind relativ neue Erscheinungen der letzten fünfzehn bis fünfundzwanzig Jahre. Ihre Entwicklung und Ausdifferenzierung beschränkt sich vor allem auf Gesellschaften westlich-industrieller Prägung, deren Grundlage ein funktional differenziertes Gesellschaftssystem ist. Mit Hilfe des Beobachtungsin-strumentes der neueren soziologischen Systemtheorie wird zunächst das Aufkommen und die immer fortschreitende Ausdifferenzierung von Trend- und Natursportarten analysiert und gedeutet. Es zeigt sich, daß diese neuen Freizeitaktivitäten über den Zugriff auf die eigene Körperlichkeit in hohem Ma-ße zur Identitätsfindung der Individuen solcher Gesellschaftssysteme beitragen.Aus geographischer Sicht stellt sich die Frage nach der Bedeutung dieser Entwicklung für die Land-schaft. Dabei wird Landschaft explizit nicht als etwas verstanden, daß 'an sich' existiert, sondern als etwas, das 'erlebt' oder 'begriffen', also immer wieder aufs Neue im Auge des Betrachters konstru-iert wird. Für die Sporttreibenden von Trend- und Natursportarten ist der Blick auf die Welt durch ihre Sportart strukturiert. Jedenfalls immer dann, wenn es darum geht, eine Sportstätte für ihre jeweilige Sportausübung auszuwählen. Die Naturlandschaft (oder auch Kulturlandschaft) wird damit zur 'Sportlandschaft'. Der Begriff der 'Landschaft' erscheint dann im Sinne Werlens 'alltäglichen Geo-graphie-Machens' als eine permanent neu zu erstellende und damit sich auch ständig verändernde Perspektive auf die Objektwelt. So kann sich im Auge der Sporttreibenden von Trend- und Natur-sportarten jedes Objekt und jede Landschaft, wenn man so will: die Welt, als ein einziger großer Sportplatz darstellen.Wenn also alles potentiell eine Sportstätte sein kann, stellt sich die Frage, wie es zur Herausbildung sogenannter Top Spots kommt, also zu jenen Sportstätten, die innerhalb der jeweiligen Sportart von herausragender Bedeutung sind - sozusagen die oberste Sprosse der Karriereleiter erklommen haben - und an der jeder gewesen sein muß, der innerhalb der sportartspezifischen Szene etwas gelten will. Dieser Frage wird anhand eines Fallbeispiels nachgegangen. Als Grundlage wurde ein Untersu-chungsgebiet gewählt, das sich bereits in einem fortgeschrittenen Stadium der Entwicklung zu einem Top Spot befindet - eine Landschaft also, die bereits eine 'Karriere als Sportlandschaft' aufzuweisen hat. Die peripher gelegene US-amerikanische Kleinstadt Moab in Südost-Utah (ca. 5.000 Einwohner) hat sich seit Anfang der 1990er Jahre zu einem internationalen Szene-Treffpunkt für Mountainbiking entwickelt. Zu dem wichtigsten Mountainbike-Trail (dem Slickrock Bike Trail) kommen pro Jahr al-lein mehr als 200.000 Mountainbike-TouristInnen. Neben dem Mountainbiking spielt River Rafting eine bedeutende Rolle im Tourismus und es hat sich dort in den letzten Jahren außerdem eine kleine Sportkletter-Szene etabliert, die in den nächsten Jahren sicherlich noch an Bedeutung zunehmen wird.