Analysis of the stress state of a halved and tabled traditional timber scarf joint with the Finite Element Method

The purpose of this study is to determine the stress distribution in the carpentry joint of halved and tabled scarf joint with the finite element method (FEM) and its comparison with the values obtained using the theory of Strength of Materials. The stress concentration areas where analyzed and the influence of mesh refinement was studied on the results in order to determine the mesh size that provides the stress values more consistent with the theory. In areas where stress concentration is lower, different mesh sizes show similar stress values. In areas where stress concentration occurs, the same values increase considerably with the refinement of the mesh. The results show a central symmetry of the isobar lines distribution where the centre of symmetry corresponds to the geometric centre of the joint. Comparison of normal stress levels obtained by the FEM and the classical theory shows small differences, except at points of stress concentration.

Using configuration management and product line software paradigms to support the experimentation process in software engineering.

There is no empirical evidence whatsoever to support most of the beliefs on which software construction is based. We do not yet know the adequacy, limits, qualities, costs and risks of the technologies used to develop software. Experimentation helps to check and convert beliefs and opinions into facts. This research is concerned with the replication area. Replication is a key component for gathering empirical evidence on software development that can be used in industry to build better software more efficiently. Replication has not been an easy thing to do in software engineering (SE) because the experimental paradigm applied to software development is still immature. Nowadays, a replication is executed mostly using a traditional replication package. But traditional replication packages do not appear, for some reason, to have been as effective as expected for transferring information among researchers in SE experimentation. The trouble spot appears to be the replication setup, caused by version management problems with materials, instruments, documents, etc. This has proved to be an obstacle to obtaining enough details about the experiment to be able to reproduce it as exactly as possible. We address the problem of information exchange among experimenters by developing a schema to characterize replications. We will adapt configuration management and product line ideas to support the experimentation process. This will enable researchers to make systematic decisions based on explicit knowledge rather than assumptions about replications. This research will output a replication support web environment. This environment will not only archive but also manage experimental materials flexibly enough to allow both similar and differentiated replications with massive experimental data storage. The platform should be accessible to several research groups working together on the same families of experiments.

Traditional education vs modern education. What is the impact of teaching techniques' evolution on students learning process?

The main objective of this article is to focus on the analysis of teaching techniques, ranging from the use of the blackboard and chalk in old traditional classes, using slides and overhead projectors in the eighties and use of presentation software in the nineties, to the video, electronic board and network resources nowadays. Furthermore, all the aforementioned, is viewed under the different mentalities in which the teacher conditions the student using the new teaching technique, improving soft skills but maybe leading either to encouragement or disinterest, and including the lack of educational knowledge consolidation at scientific, technology and specific levels. In the same way, we study the process of adaptation required for teachers, the differences in the processes of information transfer and education towards the student, and even the existence of teachers who are not any longer appealed by their work due which has become much simpler due to new technologies and the greater ease in the development of classes due to the criteria described on the new Grade Programs adopted by the European Higher Education Area. Moreover, it is also intended to understand the evolution of students’ profiles, from the eighties to present time, in order to understand certain attitudes, behaviours, accomplishments and acknowledgements acquired over the semesters within the degree Programs. As an Educational Innovation Group, another key question also arises. What will be the learning techniques in the future?. How these evolving matters will affect both positively and negatively on the mentality, attitude, behaviour, learning, achievement of goals and satisfaction levels of all elements involved in universities’ education? Clearly, this evolution from chalk to the electronic board, the three-dimensional view of our works and their sequence, greatly facilitates the understanding and adaptation later on to the business world, but does not answer to the unknowns regarding the knowledge and the full development of achievement’s indicators in basic skills of a degree. This is the underlying question which steers the roots of the presented research.

Understanding landscape and the values of traditional architecture and construction

Ponencia presentada en el congreso internacional organizado por el Comité Internacional de Arquitectura Vernácula de ICOMOS - UNESCO.

The nature of gypsum mortars for external rendering in Spain. Traditional manufacture and mineralogy

The present work focuses on gypsum mortar manufactu red in traditional kilns and used historically as exterior rendering. A documentation survey has been carried out followed by an experimental analysis using geological techniques. Conclusion shows that traditional gypsum is formed by anhydrite and inert active impurities (crystalline amorphous silica; cl ays and hydraulic phases) produced by the craft manufacture process of the system, in a kiln with a 200ºC to 1000ºC temperature interval, and continuo us fuel supply during 36 hours. Anhydrite together wit h the hydraulic phases set at consecutive time peri ods and with the presence of moisture improve the physi cal and mechanical properties of the final product. The hydration system is of great complexity and sho ws a very slow kinetics when in presence of impurities

Genetic characterization of chestnut (Castanea sativa Mill.) orchards and traditional nut varieties in El Bierzo, a glacial refuge and major cultivation site in Northwestern Spain

This paper presents a detailed genetic study of Castanea sativa in El Bierzo, a major nut production region with interesting features. It is located within a glacial refuge at one extreme of the distribution area (northwest Spain); it has a centenary tradition of chestnut management; and more importantly, it shows an unusual degree of genetic isolation. Seven nuclear microsatellite markers were selected to analyze the genetic variability and structure of 169 local trees grafted for nut production. We analyzed in the same manner 62 local nuts. The selected loci were highly discriminant for the genotypes studied, giving a combined probability of identity of 6.1 × 10−6. An unprecedented density of trees was sampled for this project over the entire region, and nuts were collected representing 18 cultivars marketed by local producers. Several instances of misclassification by local growers were detected. Fixation index estimates and analysis of molecular variance (AMOVA) data are supportive of an unexpectedly high level of genetic differentiation in El Bierzo, larger than that estimated in a previous study with broader geographical scope but based on limited local sampling (Pereira-Lorenzo et al., Tree Genet Genomes 6: 701–715, 2010a). Likewise, we have determined that clonality due to grafting had been previously overestimated. In line with these observations, no significant spatial structure was found using both a model-based Bayesian procedure and Mantel’s tests. Taken together, our results evidence the need for more fine-scale genetic studies if conservation strategies are to be efficiently improved.

The Spreading of Christianity and the introduction of Modern Architecture in Shannxi, China (1840-1949): Christian churches and traditional Chinese architecture

La arquitectura china ha experimentado grandes cambios a lo largo de un extenso proceso histórico. El hito de mayor importancia es el que da paso al denominado Tiempo Moderno, periodo en el cual irrumpe por vez primera en China la arquitectura occidental, que comienza a tener una influencia muy activa y significativa sobre los rasgos y la identidad de la arquitectura tradicional china, hasta ese momento el único estilo o forma de hacer –muy diferente, en cuanto a su concepción y fisonomía, de los planteamientos occidentales- que había sobrevivido sin desvíos significativos, configurando un panorama milenario bastante homogéneo en los aspectos técnicos y artísticos en el desarrollo de esa arquitectura. Por un cúmulo de complejas razones, la mayor parte de la arquitectura china del periodo feudal -es decir el que forman todos los años anteriores a 1849- ha desaparecido. Sin embargo, desde la fecha indicada hasta la Revolución de 1949 (el denominado periodo semicolonial o semifeudal), sí se conservan muchas edificaciones, que fueron mejor construidas y mantenidas luego, destacando por su importancia en ese sentido las iglesias cristianas. Dichos templos representan cronológicamente, no sólo la primera irrupción de la arquitectura clásica occidental en China, sino el inicio de un proceso de modernización de la profundamente enraizada y, en buena medida, estancada arquitectura vernácula, combinando técnicas y estilos de ambos planteamientos, para dar como resultado originales edificaciones de un singular eclecticismo que caracterizarían buena parte de la arquitectura de dicha etapa semicolonial. En términos generales, últimamente se ha ido prestando cada vez más atención a esta arquitectura de los tiempos modernos, aunque las iglesias cristianas de la provincia de Shaanxi no han sido objeto de estudio específico, a pesar de que su tipología es muy representativa de las construcciones de esta clase en otras regiones del interior de China. La investigación que desarrolla la presente tesis doctoral sale al paso de esa deficiencia, abriendo puertas a la continuación del trabajo referido, extendido a otras zonas o arquitecturas, y, por extensión, a la profundización analítica de la hibridación arquitectónica y cultural entre China y Occidente. Sobre las bases de investigación documental, estudios de campo y dibujo, la tesis plantea un estudio aclaratorio de los rasgos y raíces de la arquitectura tradicional china, al que sigue otro histórico y tipológico de los templos cristianos en la provincia de Shaanxi, deteniéndose en sus características fundamentales, situación (uso) actual y estado de conservación. Se ha considerado imprescindible añadir al trabajo, como apéndice, un elaborado glosario conceptual ilustrado de términos básicos arquitectónicos y constructivos, en chino, inglés y español. ABSTRACT The Chinese architecture has gone through great changes during the long process of history. The tremendous changing period was the named Modern Times of China when, for the very first time, the western architecture was introduced into China and became to influence majorly on the traditional Chinese architecture. Before that, the traditional Chinese architecture which has its own, yet totally different system from the occidental architecture system was the only architectural style could be found in China. Although, due to many historical, conceptual and architectural characteristic reasons, large amount of the ancient Chinese architecture built in the feudal China was not preserved, there are a lot of buildings of semi-feudal China that was well constructed and conserved. The most important architectural type of the semi-feudal China is the Christian Churches. It was not only the first western architectural form that was brought into and well developed in China, but also was the beginner of the modernization process of Chinese architecture. Because of the deep root of the 2000-year traditional Chinese architecture, all the Christian Churches built in China during the semi-colonial society has a combined style of both the traditional Chinese architecture and the classic western churches. They are a priceless asset of the Chinese architectural history. Recently, more and more attention had been paid on the Chinese Modern Times architecture, however, the Christian Churches in Shaanxi Province, the province which has a unique history with the Christian, but less economically developed have never been researched yet. The Christian Churches of Shaanxi Province reflect the general feature of developing history of the Christian Churches of common inner-land regions in China. The research opens the door to further study on other Christian Churches and related buildings, and also for the further study on the Chinese-western architectural and culture communication. On the base of document research, field survey and mapping, in this thesis, an in-depth study had been done on the general history of the features and roots of the traditional Chinese architecture, the developing history of the Christian Churches of Shaanxi Province and the architectural types, examples, characteristics, present situation and conservation status. By comparing the Christian Churches of the cities in Shaanxi province to the Christian Churches in other more developed cities, and by comparing the Christian Churches in China to the classic western churches, the architectural combination feature of the Christian Churches in China are highlighted. The thesis is a fundamental research on which many further studies about the architectural developing history, characteristics and conservation of the Christian Churches in China could be done. It is considered essential to add to the work, as an appendix, an elaborate conceptual illustrated glossary of architectural and construction terms in Chinese, English and Spanish.

Influencia del tratamiento "a fuego" en las características del estuco tradicional con cal = Influence of treatment "by fire" in the characteristics of traditional lime stucco

Esta investigación avanza en el intento de recuperar la técnica tradicional del estuco a fuego, paradigma de la decoración de espacios interiores hasta la mitad del s. XX por sus imitaciones marmóreas de gran calidad. Para ejecutarlos se utilizaban morteros de cal con áridos de mármol, pigmentos minerales y grasas; con estos materiales se preparaban y tendían las masas, se pintaban al fresco y se terminaban con el paso de una herramienta metálica caliente. Como sucede con otras técnicas, el paso del tiempo ha difuminado los conocimientos sobre la materia, haciendo muy difícil la conservación o restauración de los ejemplos en nuestro patrimonio. A partir de la escasa bibliografía existente se ha recuperado el proceso, sometiendo las muestras elaboradas a diferentes ensayos que han caracterizado el acabado final,tanto en sus características intrínsecas como en las que le son conferidas al proteger finalmente las muestras con una capa de cera, tal y como se realizaba tradicionalmente.---ABSTRACT---This research advances in the attempt to recover the traditional technique of stucco by fire; paradigm of indoor decoration until half of 20th century due to its high quality marbled imitations. On its implementation process, it was used lime mortars with marble aggregates, mineral pigments and greases. With these materials, masses were prepared and extended into the walls, they were painted in fresco and ended with the passage of a heated metal tool. As with any other technique, the time passing over has blurred the knowledge on the subject, making very difficult the preservation or restoration of examples in our heritage. Despite of the limited literature, the process has been recovered; subjecting the samples prepared at different trials that have characterized the finished, both in its merits and its conferred characteristics by finally protecting the samples with a layer of wax, as was done traditionally.

A group decision-making methodology with incomplete individual beliefs applied to e-Democracy

We consider the situation where there are several alternatives for investing a quantity of money to achieve a set of objectives. The choice of which alternative to apply depends on how citizens and political representatives perceive that such objectives should be achieved. All citizens with the right to vote can express their preferences in the decision-making process. These preferences may be incomplete. Political representatives represent the citizens who have not taken part in the decision-making process. The weight corresponding to political representatives depends on the number of citizens that have intervened in the decision-making process. The methodology we propose needs the participants to specify for each alternative how they rate the different attributes and the relative importance of attributes. On the basis of this information an expected utility interval is output for each alternative. To do this, an evidential reasoning approach is applied. This approach improves the insightfulness and rationality of the decision-making process using a belief decision matrix for problem modeling and the Dempster?Shafer theory of evidence for attribute aggregation. Finally, we propose using the distances of each expected utility interval from the maximum and the minimum utilities to rank the alternative set. The basic idea is that an alternative is ranked first if its distance to the maximum utility is the smallest, and its distance to the minimum utility is the greatest. If only one of these conditions is satisfied, a distance ratio is then used.

Combine use of Selected Schizosaccharomyces pombe and Lachancea thermotolerans Yeast Strains as an Alternative to the Traditional Malolactic Fermentation in Red Wine Production

Most red wines commercialized in the market use the malolactic fermentationprocess in order to ensure stability from a microbiological point of view. In this secondfermentation, malic acid is converted into L-lactic acid under controlled setups. Howeverthis process is not free from possible collateral effects that on some occasions produceoff-flavors, wine quality loss and human health problems. In warm viticulture regions suchas the south of Spain, the risk of suffering a deviation during the malolactic fermentationprocess increases due to the high must pH. This contributes to produce wines with highvolatile acidity and biogenic amine values. This manuscript develops a new red winemakingmethodology that consists of combining the use of two non-Saccharomyces yeast strains asan alternative to the traditional malolactic fermentation. In this method, malic acid is totallyconsumed by Schizosaccharomyces pombe, thus achieving the microbiological stabilizationobjective, while Lachancea thermotolerans produces lactic acid in order not to reduce andeven increase the acidity of wines produced from low acidity musts. This technique reducesthe risks inherent to the malolactic fermentation process when performed in warm regions.The result is more fruity wines that contain less acetic acid and biogenic amines than thetraditional controls that have undergone the classical malolactic fermentation.

High-Performance and Traditional Multicrystalline Silicon: Comparing Gettering Responses and Lifetime-Limiting Defects

In recent years, high-performance multicrystalline silicon (HPMC-Si) has emerged as an attractive alternative to traditional ingot-based multicrystalline silicon (mc-Si), with a similar cost structure but improved cell performance. Herein, we evaluate the gettering response of traditional mc-Si and HPMC-Si. Microanalytical techniques demonstrate that HPMC-Si and mc-Si share similar lifetime-limiting defect types but have different relative concentrations and distributions. HPMC-Si shows a substantial lifetime improvement after P-gettering compared with mc-Si, chiefly because of lower area fraction of dislocation-rich clusters. In both materials, the dislocation clusters and grain boundaries were associated with relatively higher interstitial iron point-defect concentrations after diffusion, which is suggestive of dissolving metal-impurity precipitates. The relatively fewer dislocation clusters in HPMC-Si are shown to exhibit similar characteristics to those found in mc-Si. Given similar governing principles, a proxy to determine relative recombination activity of dislocation clusters developed for mc-Si is successfully transferred to HPMC-Si. The lifetime in the remainder of HPMC-Si material is found to be limited by grain-boundary recombination. To reduce the recombination activity of grain boundaries in HPMC-Si, coordinated impurity control during growth, gettering, and passivation must be developed.

TRANSFORMAÇÃO MÍSTICA NA RELIGIÃO DO APÓSTOLO PAULO A recepção do Moisés glorificado em 2º Coríntios na perspectiva da experiência religiosa

Esta tese é um estudo do conceito de transformação místico-apocalíptica na perspectiva da experiência religiosa e que tem como objeto o caso paulino. As pesquisas sobre Paulo Apóstolo geralmente acompanham a abordagem tradicional que o vê como pensador e teólogo. Mas, em sintonia com algumas obras do passado e especialmente as mais recentes sobre Paulo em relação à apocalíptica e misticismo judaicos, esta tese desenvolve uma análise na perspectiva da experiência religiosa. Considerando a tradição de ascensão visionária como quadro de plausibilidade, é apresentada uma análise dos relatos de ascensão da literatura judaica antiga, com destaque para Moisés, aqui comparado com a recepção paulina do Moisés transformado em 2º Coríntios. O resultado da pesquisa foi que a literatura judaica antiga testemunha um padrão de transformação proléptica em ascensão celestial que fazia parte das crenças e práticas religiosas. A linguagem usada por Paulo em 2º Coríntios, notoriamente no capítulo 3, demonstra que ele estava envolvido em tais crenças e práticas, ainda que com conotações próprias. O Moisés transformado de face gloriosa de Êxodo 34, que foi recebido pelas tradições judaicas como um viajante celestial, o que era corrente nos tempos paulinos, é o foco de Paulo em 2º Coríntios 3. Para Paulo, sua condição é superior à de Moisés porque ele tem acesso livre e permane nte à gloria de Deus, acesso esse estendido a seus correligionários e que resulta em processo de transformação proléptica. Também porque seu evangelho é uma revelação cristológica divina última superior ao que foi revelado a Moisés no Sinai. Este acesso livre e permanente que inclui esta transformação antecipada se dá em termos de cultos extáticos de natureza visionária.(AU)

TRANSFORMAÇÃO MÍSTICA NA RELIGIÃO DO APÓSTOLO PAULO A recepção do Moisés glorificado em 2º Coríntios na perspectiva da experiência religiosa

Esta tese é um estudo do conceito de transformação místico-apocalíptica na perspectiva da experiência religiosa e que tem como objeto o caso paulino. As pesquisas sobre Paulo Apóstolo geralmente acompanham a abordagem tradicional que o vê como pensador e teólogo. Mas, em sintonia com algumas obras do passado e especialmente as mais recentes sobre Paulo em relação à apocalíptica e misticismo judaicos, esta tese desenvolve uma análise na perspectiva da experiência religiosa. Considerando a tradição de ascensão visionária como quadro de plausibilidade, é apresentada uma análise dos relatos de ascensão da literatura judaica antiga, com destaque para Moisés, aqui comparado com a recepção paulina do Moisés transformado em 2º Coríntios. O resultado da pesquisa foi que a literatura judaica antiga testemunha um padrão de transformação proléptica em ascensão celestial que fazia parte das crenças e práticas religiosas. A linguagem usada por Paulo em 2º Coríntios, notoriamente no capítulo 3, demonstra que ele estava envolvido em tais crenças e práticas, ainda que com conotações próprias. O Moisés transformado de face gloriosa de Êxodo 34, que foi recebido pelas tradições judaicas como um viajante celestial, o que era corrente nos tempos paulinos, é o foco de Paulo em 2º Coríntios 3. Para Paulo, sua condição é superior à de Moisés porque ele tem acesso livre e permane nte à gloria de Deus, acesso esse estendido a seus correligionários e que resulta em processo de transformação proléptica. Também porque seu evangelho é uma revelação cristológica divina última superior ao que foi revelado a Moisés no Sinai. Este acesso livre e permanente que inclui esta transformação antecipada se dá em termos de cultos extáticos de natureza visionária.(AU)

O ESTUDANTE DA EAD (EDUCAÇÃO A DISTÂNCIA): UM ESTUDO DE PERFIL E INTERAÇÃO GERACIONAL

A aprendizagem formal e tradicional tem dado lugar a um cenário desafiador no qual educador e educando não comungam do mesmo espaço físico. A Educação a Distância (EAD), ainda é vista como uma solução que agrega cada vez mais alunos de diferentes idades que desejam uma graduação de ensino superior ou a continuidade dela. A pesquisa com o título: “O estudante da EAD (educação a distância): um estudo de perfil e interação geracional” propõe conhecer as características do perfil atual do estudante da EAD, abordando o diálogo entre as gerações no ambiente social escolar. O enfoque da pesquisa é qualitativa, exploratória e descritiva com dados que foram coletados através de entrevista com 08 alunos das gerações X e Y para assim entender se este perfil tem sido renovado com alunos mais jovens, do que a faixa etária de 25 a 45 anos. O resultado demonstra que alunos na faixa de 17 a 24 anos a cada ano aumentam 1% das matrículas. Já a faixa de 25 a 45 anos prevalece com 70% das matrículas. Portanto, este resultado revela que o perfil do aluno EAD ainda é o do jovem adulto, para adulto mais experiente, que busca a graduação com o propósito de progressão no ambiente profissional. As duas gerações citadas geração X e geração Y, mesmo em contextos históricos diferenciados de valores, crenças e comportamentos participam atualmente de uma transformação social que contempla os meios de produção do trabalho, a formação educacional e as relações sociais. O diálogo intergeracional direciona a um aprendizado compartilhado, participativo na troca de experiências mutuas. Para a geração X o jovem atual não é mais nomeado como o que precisa escutar e aprender, mas tem muito a partilhar, principalmente diante da facilidade com os meios tecnológicos. E para a geração Y, na partilha não há barreiras de idade, mas a segurança de interagir e se comunicar diante da troca de experiências

ASSISTÊNCIA DE SAÚDE ÀS MULHERES MUÇULMANAS NO BRASIL: UMA ANÁLISE DA RELAÇÃO ENTRE O SISTEMA RELIGIOSO ISLÂMICO E A POLÍTICA NACIONAL DE ATENÇÃO INTEGRAL À SAÚDE DA MULHER.

A presente dissertação tem por objetivo analisar os aspectos religiosos islâmicos e as implicações das relações de gênero no islam sobre a assistência de saúde às mulheres muçulmanas, e através disto, discutir a importância do conhecimento prévio do islamismo pelos profissionais de saúde para propor uma assistência de saúde congruente a estas mulheres, tendo por referência a Política Nacional de Atenção Integral à Saúde da Mulher. Esta pesquisa tem abordagem qualitativa, com o desenvolvimento de pesquisa de campo e aplicação de um roteiro de perguntas semi-estruturado, com questões relacionadas ao islamismo e à saúde das mulheres. Ao todo, foram entrevistadas dez pessoas, sendo estas: quatro mulheres revertidas ao islam, três mulheres de família muçulmana, dois sheiks e uma assistente social. As entrevistas foram realizadas no Centro de Divulgação do Islam para a América Latina e o Caribe (CDIAL) e na Assembléia Mundial da Juventude Islâmica na América Latina (WAMY).