Qualidade de vida de pessoas com úlcera venosa: associação dos aspectos sociodemográficos, de saúde, assistência e clínicos da lesão

Venous ulcer (VU) is a lower limbs injury resulting from inadequate return of venous blood in feet or legs. Although it is not a deadly disease, it causes chronic wounds, which seriously undermine patients´ quality of life (QOL) and sometimes leads to drastic family, social, economic and psychological changes. In this sense, there are several aspects that may influence the venous ulcers patients´ QOL. The study´s objective aimed on the association of socio-demographic and health, health care and clinical injury on UV patients‟ QOL. Analytical studies, which consider the complexity of factors involved in changes in UV patients‟ QOL has a cross-sectional and quantitative approach. The HUOL Ethics Committee approved this project (n.279/09). The collection of data lasted a period of 3 months in 2010 and it took place at the clinic of Angiology at Hospital Universitário Onofre Lopes (HUOL). The data sample consisted of 60 patients treated by UV angiologists in the HUOL Surgical Clinic. The results were analyzed with SPSS 15.0 by descriptive and inferential statistics. The study was based on UV patients that were predominantly female, average age of 61.4 years, that had low education level and low family income, with occupations requiring long periods of standing or sitting, but mostly retired, unemployed or laid off due to the disease and/or due to chronic diseases associated with the UV. The study took also into consideration patients that used inappropriate products, that were improperly treated by a professional caregiver, that lacked of adequate guidance and compression therapy, that performed no lifting of the lower limbs and regular exercise, that the time of injury were greater than or equal to six months, that were missing specific laboratory tests. The study‟s reference were on recurrent lesions, medium to large lesions area, bed of the lesion (injuries) with fibrin and/or necrosis, with amount of exudate with medium to large, odorless and no signs of infection, with tissue loss between 1st and 2nd degree, without collecting swab or biopsy and with pain. In general, QOL of researched individuals were considered low, the maximum score was 69 points, which the areas that were mostly influenced were the total scores of QOL functional capacity (0.021), emotional (0.000) and social functioning (0.080). Of the 60 individuals, 53.3% had scores between 40 and 69 points in SF-36, and they had the best scores in sociodemographic and health variables (ρ = 0.049). In respect to the assistance and injury characteristics, patients who scored between 40 and 69 points in SF-36 had better scores on these characteristics. By combining the socio-demographic variables, health, and handling characteristics of the injury, we observed a significant difference (ρ = 0.032) when linking them with the QOL total scores. When analyzing separately the domains of the SF-36 scores on the quality of life, we find that the areas that showed statistical significance were functional ability (ρ = 0.035), appearance (ρ = 0.019), emotional (ρ = 0.000), and mental health (ρ = 0.050). Among the socio-demographic characteristics studied, gender and marital status contributed more to the reduction of QOL and among the variables of assistance and the injury, orientation, reference and area of UV contributed the most. By analyzing these five variables all together in accordance with the overall score obtained in the quality of life, we found a significant correlation (ρ = 0.002); with 6.23 times more chances of patients have better QOL in the presence of these five positive factors. By conducting the Mann Whitney U test between all the five demographic variables, health, and clinical care, we found that this combination also proved to be significant (ρ = 0.006). Therefore, patients with these five variables positive tend to have a better QOL. Based on these results, we reject the null hypothesis (H0) and accept the alternative hypothesis (H1) proposed in this study because we noted that the QOL of patients with UV is associated with sociodemographic and health, health care and clinical aspects of the injury

Influência da fonte material e do tempo de cura na propagação vegetativa da pitaya vermelha (Hylocereus undatus Haw)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aumento da jornada de trabalho :qual a repercussão na vida dos trabalhadores da enfermagem?

The worker of the public service is loosing your acquisitive power by means of the politics of fiscal settlement. The ways out that were found in the health sector, especially in nursing, is being the increasing workday for beyond 40 or 20 hours established in the link of the work with the state. This survey has the object to identify the possible repercussion of the increasing workday in daily life workers from nursing in the public service of Rio Grande do Norte. The theory reference used was the work of Marx (1982) and Antunes (2000,2001) and the daily living in Heller (1991,1992). The methodology used was a qualitative survey in the exploration kind. The informations were gathered through interviews with open questions almost structured with workers of nursing, managers and representatives of entity. The analysis of informations were made through general categories, work, and daily life, using elements from dialetics-hermeneutics according to Minayo (1992,2002). In the analysis, it was identified that the ways that were found for the overcoming of the loss of acquisitive power were the many-employment; the extra scale of shift; the subletting of work posts and the substitution of friends in scales of work, and all of them being changed in increase. Other aspect realized was the move of rights, like vacation and medical license for the workers that act in extra scale. The tiredness, stress, and bad humor are influents factors in the development of work.. The reduction of free time makes in the workers ahguish because of the familiarity decreasement just as time to dedicate themselves to the technical-scientific improvement and for the cultivation of other aspects of subjectivity, as leisure, care and culture. The low salary and the non reajustment are the reasons for the adoption of part workers for the increasing workday, and government has been responsible for this situation. The conclusion was that the increasing workday has strong repercussions in the professional and personal daily life workers that made part of the survey

Produção de mudas de caramboleiras 'B-10' e 'Golden Star': I - parâmetros biológicos

O Brasil é um dos maiores produtores de carambola do mundo, entretanto há poucas informações científicas, especialmente estudos de nutrição mineral com mudas dessa frutífera. Objetivando contribuir com o conhecimento desse importante aspecto, desenvolveu-se estudo que permitisse avaliar o crescimento e o acúmulo de nutrientes em mudas de caramboleiras, cultivadas em solução nutritiva. O experimento foi realizado em parcelas subdivididas, sendo utilizadas como parcela as duas cultivares de caramboleira ('B-10' e 'Golden Star') e, como subparcelas, as cinco épocas de coleta de plantas, realizadas aos 208; 233; 258; 283 e 308 dias após o transplantio para a solução nutritiva. O delineamento foi inteiramente casualizado, com três repetições. As mudas foram cultivadas em vasos (8L) com solução nutritiva (pH=5,5 ± 0,5), com aeração. O experimento iniciou-se em 24-08-2005. Nos diferentes órgãos das mudas (folhas, caule e raízes), avaliaram-se o crescimento e o acúmulo de nutrientes, e os índices nutricionais. Não houve diferenças no crescimento e, em geral, no acúmulo da massa da matéria seca entre as duas cultivares. Houve acúmulo linear da massa da matéria seca das mudas de caramboleira com o tempo de cultivo, sendo maior nas folhas > caule > raízes. O período de maior acúmulo da massa de matéria seca e da taxa de crescimento relativo na planta inteira esteve compreendido entre 208 - 233 e 233 - 258 dias após o transplantio para a 'B-10' e a 'Golden Star', respectivamente.

Aplicação de danos mecânicos em abacates e seus efeitos na qualidade dos frutos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

This work presents a study in quality of health care, with focus on consulting appointment. The main purpose is to define a statistical model and propose a quality grade of the consulting appointment time. The time considered is that from the day the patient get the appointment done to the day the consulting is realized. It is used reliability techniques and functions that has as main characteristic the analysis of data regarding the time of occurrence certain event. It is gathered a random sample of 1743 patients in the appointment system of a University Hospital - the Hospital Universitário Onofre Lopes - of the Federal University of Rio Grande do Norte, Brazil. The sample is randomly stratified in terms on clinical specialty. The data were analyzed against the parametric methods of the reliability statistics and the adjustment of the regression model resulted in the Weibull distribution being best fit to data. The quality grade proposed is based in the PAHO criteria for a consulting appointment and result that no clinic got the PAHO quality grade. The quality grade proposed could be used to define priority for improvement and as criteria to quality control

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Tempo de trânsito intestinal, desempenho, característica de carcaça e composição corporal de frangos de corte alimentados com rações isoenergéticas formuladas com diferentes níveis de óleo de soja

Este estudo foi conduzido para avaliar o efeito da inclusão de 0,0; 3,3; 6,6 e 9,9% de óleo de soja em rações isoenergéticas sobre o tempo de trânsito (TT), desempenho, características de carcaça e composição corporal de frangos de corte de 21 a 56 dias de idade. O TT foi determinado no 22º e 42º dias de idade, utilizando-se 192 frangos distribuídos em um esquema fatorial 2x4 (duas idades e quatro níveis de óleo de soja), com quatro repetições de seis aves cada. Para o experimento de desempenho foram utilizados 840 frangos de corte, com peso inicial médio de 870 g, distribuídos em delineamento inteiramente casualizado, com quatro tratamentos e seis repetições de 35 aves por unidade experimental. Os níveis de inclusão do óleo de soja influenciaram de forma linear decrescente o TT em ambas as idades. No período de 21 a 42 dias, o ganho de peso e as conversões alimentar e calórica aumentaram de forma quadrática e os consumos de ração e de energia metabolizável, de forma linear. No período total, a adição do óleo de soja melhorou linearmente o ganho de peso, os consumos de energia e de ração e, de forma quadrática, as conversões alimentar e calórica. No 42º e 56º dias de idade, a porcentagem de gordura abdominal, como também o rendimento de carcaça no 56º dia, foi influenciada de forma quadrática. O teor de gordura total foi influenciado de forma linear crescente e o teor de cinzas reduziu linearmente aos 56 dias de idade.

Group Sequential Communication (GSC): Especificação e Análise de Desempenho de umMecanismo de Comunicação de Tempo Real Compatível ao Padrão IEEE 802.11/11e Aplicado à Automação Industrial

This thesis proposes the specification and performance analysis of a real-time communication mechanism for IEEE 802.11/11e standard. This approach is called Group Sequential Communication (GSC). The GSC has a better performance for dealing with small data packets when compared to the HCCA mechanism by adopting a decentralized medium access control using a publish/subscribe communication scheme. The main objective of the thesis is the HCCA overhead reduction of the Polling, ACK and QoS Null frames exchanged between the Hybrid Coordinator and the polled stations. The GSC eliminates the polling scheme used by HCCA scheduling algorithm by using a Virtual Token Passing procedure among members of the real-time group to whom a high-priority and sequential access to communication medium is granted. In order to improve the reliability of the mechanism proposed into a noisy channel, it is presented an error recovery scheme called second chance algorithm. This scheme is based on block acknowledgment strategy where there is a possibility of retransmitting when missing real-time messages. Thus, the GSC mechanism maintains the real-time traffic across many IEEE 802.11/11e devices, optimized bandwidth usage and minimal delay variation for data packets in the wireless network. For validation purpose of the communication scheme, the GSC and HCCA mechanisms have been implemented in network simulation software developed in C/C++ and their performance results were compared. The experiments show the efficiency of the GSC mechanism, especially in industrial communication scenarios.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Determinação dos parâmetros do controlador preditivo generalizado com função de pesos variante no tempo através de algoritmos genéticos

The predictive control technique has gotten, on the last years, greater number of adepts in reason of the easiness of adjustment of its parameters, of the exceeding of its concepts for multi-input/multi-output (MIMO) systems, of nonlinear models of processes could be linearised around a operating point, so can clearly be used in the controller, and mainly, as being the only methodology that can take into consideration, during the project of the controller, the limitations of the control signals and output of the process. The time varying weighting generalized predictive control (TGPC), studied in this work, is one more an alternative to the several existing predictive controls, characterizing itself as an modification of the generalized predictive control (GPC), where it is used a reference model, calculated in accordance with parameters of project previously established by the designer, and the application of a new function criterion, that when minimized offers the best parameters to the controller. It is used technique of the genetic algorithms to minimize of the function criterion proposed and searches to demonstrate the robustness of the TGPC through the application of performance, stability and robustness criterions. To compare achieves results of the TGPC controller, the GCP and proportional, integral and derivative (PID) controllers are used, where whole the techniques applied to stable, unstable and of non-minimum phase plants. The simulated examples become fulfilled with the use of MATLAB tool. It is verified that, the alterations implemented in TGPC, allow the evidence of the efficiency of this algorithm

Ajuste automático e otimização do tempo de espera (Idle time) em bombeio mecânico de petróleo

The present work presents an algorithm proposal, which aims for controlling and improving idle time to be applied in oil production wells equipped with beam pump. The algorithm was totally designed based on existing papers and data acquired from two Potiguar Basin pilot wells. Oil engineering concepts such as submergence, pump off, Basic Sediments and Water (BSW), Inflow Performance Relationship (IPR), reservo ir pressure, inflow pressure, among others, were included into the algorithm through a mathematical treatment developed from a typical well and then extended to the general cases. The optimization will increase the well production potential maximum utilization having the smallest number of pumping unit cycles directly reflecting on operational cost and electricity consumption reduction

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional

A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.

Multi-resolução com fóvea móvel para redução e abstração de dados em tempo real

We propose a new approach to reduction and abstraction of visual information for robotics vision applications. Basically, we propose to use a multi-resolution representation in combination with a moving fovea for reducing the amount of information from an image. We introduce the mathematical formalization of the moving fovea approach and mapping functions that help to use this model. Two indexes (resolution and cost) are proposed that can be useful to choose the proposed model variables. With this new theoretical approach, it is possible to apply several filters, to calculate disparity and to obtain motion analysis in real time (less than 33ms to process an image pair at a notebook AMD Turion Dual Core 2GHz). As the main result, most of time, the moving fovea allows the robot not to perform physical motion of its robotics devices to keep a possible region of interest visible in both images. We validate the proposed model with experimental results

Modelagem aplicada à análise de desempenho do provedor de serviços de uma rede de automação hospitalar ieee 802.3/pm-ah de tempo real

The incorporate of industrial automation in the medical are requires mechanisms to safety and efficient establishment of communication between biomedical devices. One solution to this problem is the MP-HA (Multicycles Protocol to Hospital Automation) that down a segmented network by beds coordinated by an element called Service Provider. The goal of this work is to model this Service Provider and to do performance analysis of the activities executed by in establishment and maintenance of hospital networks