An Interdomain PKI Model Based on Trust Lists

The penetration of PKI technology in the market is moving slowly due to interoperability concerns. Main causes are not technical but political and social since there is no trust development model that appropriately deals with multidomain PKIs. We propose a new architecture that on one hand considers that trust is not an homogeneous property but tied to a particular relation, and on the other hand, trust management must be performed through specialized entities that can evaluate its risks and threads. The model is based on trust certificate lists that allows users to hold a personalized trust view without having to get involved in technical details. The model dynamically adapts tothe context changes thanks to a new certificate extension, we have called TrustProviderLink (TPL).

Flour production from shrimp by-products and sensory evaluation of flour-based products

The objective of this work was to evaluate the production of flour using by-products (cephalothorax) obtained from the shrimp (Litopenaeus vannamei) industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05%) and minerals (20.97%). Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry), which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

Benchmarking project of the Department of Electrical Engineering of Lappeenranta University of Technology

Lappeenrannan teknillisen korkeakoulun sähkötekniikan osasto muutti 1.8.2005 sähkötekniikan tutkinnon kaksiportaiseksi ja vastaamaan näin Bologna-prosessia ja Suomen yliopistolainsäädäntöä. Tutkinnonuudistuksen myötä osasto haluaa varmistaa sähkötekniikan tutkintojen laadun ja vertailtavuuden sekä parantaa opiskelijoidensekä henkilökunnan liikkuvuutta. Tutkintojen laatu ja vertailtavuus osoitetaan sähkötekniikan osaston benchmark-projektilla, jossa kerätään tietoja maisteri- ja tohtorintutkintoa tarjoavista eurooppalaisista yliopistoista. Diplomityö käsittää BM-projektin kolmannen vaiheen suunnittelun ja toteutuksen sisältäen teoriaa benchmark-projekteille tyypillisistä toimintatavoista. Hyväksi havaitut menetelmiä, kuten kyselyt ja matriisit, on tässä työssä otettu soveltuvin osin sähkötekniikan osaston BM-projektin työkaluiksi. Diplomityössä analysoidaan työkalujen avulla BM-kumppaneilta kerättyjä tietoja sekä esitetään ratkaisuja, miten sähkötekniikan osastolla voidaan jatkaa parhaiden toimintatapojen löytämistä.

XML-based information management environment for PE technologies

Printed electronics is an emerging concept in electronics manufacturing and it is in very early development stage. The technology is not stable, design kits are not developed, and flows and Computer Aided Design (CAD) tools are not fixed yet. The European project TDK4PE addresses all this issues and this PFC has been realized on this context. The goal is to develop an XML-based information system for the collection and management of information from the technology and cell libraries developed in TDK4PE. This system will ease the treatment of that information for a later generation of specific Design Kits (DK) and the corresponding documentation. This work proposes a web application to generate technology files and design kits in a formatted way; it also proposes a structure for them and a database implementation for storing the needed information. The application will allow its users to redefine the structure of those files, as well as export and import XML files, between other formats.

Targeting Cytokines: Production and Characterization of Anti-TNF-α scFvs by Phage Display Technology.

The antibody display technology (ADT) such as phage display (PD) has substantially improved the production of monoclonal antibodies (mAbs) and Ab fragments through bypassing several limitations associated with the traditional approach of hybridoma technology. In the current study, we capitalized on the PD technology to produce high affinity single chain variable fragment (scFv) against tumor necrosis factor-alpha (TNF- α), which is a potent pro-inflammatory cytokine and plays important role in various inflammatory diseases and malignancies. To pursue production of scFv antibody fragments against human TNF- α, we performed five rounds of biopanning using stepwise decreased amount of TNF-α (1 to 0.1 μ g), a semi-synthetic phage antibody library (Tomlinson I + J) and TG1 cells. Antibody clones were isolated and selected through enzyme-linked immunosorbent assay (ELISA) screening. The selected scFv antibody fragments were further characterized by means of ELISA, PCR, restriction fragment length polymorphism (RFLP) and Western blot analyses as well as fluorescence microscopy and flow cytometry. Based upon binding affinity to TNF-α , 15 clones were selected out of 50 positive clones enriched from PD in vitro selection. The selected scFvs displayed high specificity and binding affinity with Kd values at nm range to human TNF-α . The immunofluorescence analysis revealed significant binding of the selected scFv antibody fragments to the Raji B lymphoblasts. The effectiveness of the selected scFv fragments was further validated by flow cytometry analysis in the lipopolysaccharide (LPS) treated mouse fibroblast L929 cells. Based upon these findings, we propose the selected fully human anti-TNF-α scFv antibody fragments as potential immunotherapy agents that may be translated into preclinical/clinical applications.

The Reflections of Strategic Orientation on profitability - A resource-based study in pulp and paper industry

Tutkielman tavoitteena oli analysoida erilaisia strategisia orientaatioita sellu- ja paperiteollisuudessa. Sellu- ja paperiteollisuus on kohtaamassa strategisia haasteita, jotka ulottuvat syvälle sen rakenteisiin. Yritykset ovat valinneet erilaisia lähestymistapoja organisoidessaan tuotantoa ja kansainvälistä arvoketjuaan tässä muuttuvassa ympäristössä. Tutkimukseen valittiin 30 suurinta sellu- ja paperiteollisuudessa toimivaa yritystä ja mahdollisia syitä kannattavuuseroihin yritysten välillä analysoitiin. Yritysten strategista orientaatiota tarkasteltiin vertailemalla muun muassa seuraavia tekijöitä: vertikaalinen integraatioaste, tuotevalikoiman laajuus, tuotantokapasiteetin levinneisyys ja tuotantokapasiteetin ikä. Kannattavuutta mitattiin erilaisilla talouden tunnusluvuilla (liikevoitto, oman pääoman tuotto-%, koko pääoman tuotto-%). Tulosten mukaan yrityksiä voidaan ryhmitellä strategisen orientaation perusteella ja ryhmien välillä on kannattavuuseroja.

A microarray-based system for the simultaneous analysis of single nucleotide polymorphisms in human genes involved in the metabolism of anti-malarial drugs

Background: In order to provide a cost-effective tool to analyse pharmacogenetic markers in malaria treatment, DNA microarray technology was compared with sequencing of polymerase chain reaction (PCR) fragments to detect single nucleotide polymorphisms (SNPs) in a larger number of samples. Methods: The microarray was developed to affordably generate SNP data of genes encoding the human cytochrome P450 enzyme family (CYP) and N-acetyltransferase-2 (NAT2) involved in antimalarial drug metabolisms and with known polymorphisms, i.e. CYP2A6, CYP2B6, CYP2C8, CYP2C9, CYP2C19, CYP2D6, CYP3A4, CYP3A5, and NAT2. Results: For some SNPs, i.e. CYP2A6*2, CYP2B6*5, CYP2C8*3, CYP2C9*3/*5, CYP2C19*3, CYP2D6*4 and NAT2*6/*7/*14, agreement between both techniques ranged from substantial to almost perfect (kappa index between 0.61 and 1.00), whilst for other SNPs a large variability from slight to substantial agreement (kappa index between 0.39 and 1.00) was found, e. g. CYP2D6*17 (2850C>T), CYP3A4*1B and CYP3A5*3. Conclusion: The major limit of the microarray technology for this purpose was lack of robustness and with a large number of missing data or with incorrect specificity.

Intercultural Competence of Masters of Science in Business Administration and in Technology

Tutkielman tavoitteena on selvittää minkälaista kulttuurienvälistä kompetenssia Lappeenrannan teknillisestä yliopistosta vastavalmistuneilla kauppatieteenmaistereilla sekä diplomi-insinööreillä tulisi olla työnantajien näkökulmasta. Tutkimuksen tarkoituksena on myös tarkastella, että voidaanko kaikkia Lappeenrannan teknillisestä yliopistosta valmistuvia kutsua Kansainvälisiksi Huippuosaajiksi sekä kuinka Lappeenrannan teknillinen yliopisto voisi parantaa vastavalmistuvien kulttuurienvälistä kompetenssia. Teoreettinen osa tarkastelee kulttuurienvälisen kommunikaation tärkeimpiä elementtejä, kulttuurienvälistä kompetenssia ja vastavalmistuneiden kauppatieteenmaistereiden sekä diplomi-insinöörien tarvitsemaa ammatillista osaamista. Empiria koostuu kymmenen työnantajien teemahaastattelun tuloksista. Lopuksi johtopäätöksissä empirian tuloksia verrataan teorian löydöksiin. Tulokset osoittavat että kulttuurienvälinen kompetenssi koostuu kolmesta dimensiosta: henkilökohtaisista ominaisuuksista, tiedosta ja kommunikointikyvystä. Henkilökohtaisiin ominaisuuksiin sisältyvät empaattisuus, epävarmuuden sietokyky sekä avoin ja utelias asenne. Tieto - ulottuvuus koostuu yleisestä ja erityisestä kulttuuritiedosta, kielitaidosta sekä ammatillisesta osaamisesta. Kommunikointikykyyn puolestaan sisältyvät hyvät vuorovaikutustaidot. Työnantajat olettavat nykyään vastavalmistuneilla olevan ammatillisen osaamisen ja kielitaidon lisäksi, kulttuuritietoutta sekä kansainvälistä kokemusta. Lappeenrannan teknillinen yliopisto voisi parantaa vastavalmistuneiden kulttuurienvälistä kompetenssia tarjoamalla kulttuurienvälisen kommunikaation opetusta.

The value of future opportunities: comparison of information technology firms and forest companies

There are several alternatives for valuing the future opportunities of firms. The traditional appraisal methods for single projects such as net present value, internalrate of return and payback rules have been criticized in recent years. It has been said that they do not take into account all growth opportunities of firms. At the company level, business valuation is traditionally based on financial and market information. Yield estimates, net worth values and market values of shares are commonly used. Naturally, all valuation methods have their own strengths and shortcomings. In the background of most estimation rules there is the idea that the future of the firms is quite clear and predictable. However, in recent times the business environment of most companies has changed to a more unpredictable direction and the effects of uncertainty have increased. There has been a growing interest in estimating the risks and values of future possibilities. The aim of the current paper is to describe the difference between the value of futureopportunities in information technology firms and forest companies, and also toanalyse the backgrounds for the observed gap.

Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

FPGA-Based Control Design for Power Electronic Applications

Tehoelektoniikkalaitteella tarkoitetaan ohjaus- ja säätöjärjestelmää, jolla sähköä muokataan saatavilla olevasta muodosta haluttuun uuteen muotoon ja samalla hallitaan sähköisen tehon virtausta lähteestä käyttökohteeseen. Tämä siis eroaa signaalielektroniikasta, jossa sähköllä tyypillisesti siirretään tietoa hyödyntäen eri tiloja. Tehoelektroniikkalaitteita vertailtaessa katsotaan yleensä niiden luotettavuutta, kokoa, tehokkuutta, säätötarkkuutta ja tietysti hintaa. Tyypillisiä tehoelektroniikkalaitteita ovat taajuudenmuuttajat, UPS (Uninterruptible Power Supply) -laitteet, hitsauskoneet, induktiokuumentimet sekä erilaiset teholähteet. Perinteisesti näiden laitteiden ohjaus toteutetaan käyttäen mikroprosessoreja, ASIC- (Application Specific Integrated Circuit) tai IC (Intergrated Circuit) -piirejä sekä analogisia säätimiä. Tässä tutkimuksessa on analysoitu FPGA (Field Programmable Gate Array) -piirien soveltuvuutta tehoelektroniikan ohjaukseen. FPGA-piirien rakenne muodostuu erilaisista loogisista elementeistä ja niiden välisistä yhdysjohdoista.Loogiset elementit ovat porttipiirejä ja kiikkuja. Yhdysjohdot ja loogiset elementit ovat piirissä kiinteitä eikä koostumusta tai lukumäärää voi jälkikäteen muuttaa. Ohjelmoitavuus syntyy elementtien välisistä liitännöistä. Piirissä on lukuisia, jopa miljoonia kytkimiä, joiden asento voidaan asettaa. Siten piirin peruselementeistä voidaan muodostaa lukematon määrä erilaisia toiminnallisia kokonaisuuksia. FPGA-piirejä on pitkään käytetty kommunikointialan tuotteissa ja siksi niiden kehitys on viime vuosina ollut nopeaa. Samalla hinnat ovat pudonneet. Tästä johtuen FPGA-piiristä on tullut kiinnostava vaihtoehto myös tehoelektroniikkalaitteiden ohjaukseen. Väitöstyössä FPGA-piirien käytön soveltuvuutta on tutkittu käyttäen kahta vaativaa ja erilaista käytännön tehoelektroniikkalaitetta: taajuudenmuuttajaa ja hitsauskonetta. Molempiin testikohteisiin rakennettiin alan suomalaisten teollisuusyritysten kanssa soveltuvat prototyypit,joiden ohjauselektroniikka muutettiin FPGA-pohjaiseksi. Lisäksi kehitettiin tätä uutta tekniikkaa hyödyntävät uudentyyppiset ohjausmenetelmät. Prototyyppien toimivuutta verrattiin vastaaviin perinteisillä menetelmillä ohjattuihin kaupallisiin tuotteisiin ja havaittiin FPGA-piirien mahdollistaman rinnakkaisen laskennantuomat edut molempien tehoelektroniikkalaitteiden toimivuudessa. Työssä on myösesitetty uusia menetelmiä ja työkaluja FPGA-pohjaisen säätöjärjestelmän kehitykseen ja testaukseen. Esitetyillä menetelmillä tuotteiden kehitys saadaan mahdollisimman nopeaksi ja tehokkaaksi. Lisäksi työssä on kehitetty FPGA:n sisäinen ohjaus- ja kommunikointiväylärakenne, joka palvelee tehoelektroniikkalaitteiden ohjaussovelluksia. Uusi kommunikointirakenne edistää lisäksi jo tehtyjen osajärjestelmien uudelleen käytettävyyttä tulevissa sovelluksissa ja tuotesukupolvissa.

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

MANAGING STRATEGIC CHANGE:New Business Models Applying Wireless Technology as a Source of Competitive Edge

The diffusion of mobile telephony began in 1971 in Finland, when the first car phones, called ARP1 were taken to use. Technologies changed from ARP to NMT and later to GSM. The main application of the technology, however, was voice transfer. The birth of the Internet created an open public data network and easy access to other types of computer-based services over networks. Telephones had been used as modems, but the development of the cellular technologies enabled automatic access from mobile phones to Internet. Also other wireless technologies, for instance Wireless LANs, were also introduced. Telephony had developed from analog to digital in fixed networks and allowed easy integration of fixed and mobile networks. This development opened a completely new functionality to computers and mobile phones. It also initiated the merger of the information technology (IT) and telecommunication (TC) industries. Despite the arising opportunity for firms' new competition the applications based on the new functionality were rare. Furthermore, technology development combined with innovation can be disruptive to industries. This research focuses on the new technology's impact on competition in the ICT industry through understanding the strategic needs and alternative futures of the industry's customers. The change speed inthe ICT industry is high and therefore it was valuable to integrate the DynamicCapability view of the firm in this research. Dynamic capabilities are an application of the Resource-Based View (RBV) of the firm. As is stated in the literature, strategic positioning complements RBV. This theoretical framework leads theresearch to focus on three areas: customer strategic innovation and business model development, external future analysis, and process development combining these two. The theoretical contribution of the research is in the development of methodology integrating theories of the RBV, dynamic capabilities and strategic positioning. The research approach has been constructive due to the actual managerial problems initiating the study. The requirement for iterative and innovative progress in the research supported the chosen research approach. The study applies known methods in product development, for instance, innovation process in theGroup Decision Support Systems (GDSS) laboratory and Quality Function Deployment (QFD), and combines them with known strategy analysis tools like industry analysis and scenario method. As the main result, the thesis presents the strategic innovation process, where new business concepts are used to describe the alternative resource configurations and scenarios as alternative competitive environments, which can be a new way for firms to achieve competitive advantage in high-velocity markets. In addition to the strategic innovation process as a result, thestudy has also resulted in approximately 250 new innovations for the participating firms, reduced technology uncertainty and helped strategic infrastructural decisions in the firms, and produced a knowledge-bank including data from 43 ICT and 19 paper industry firms between the years 1999 - 2004. The methods presentedin this research are also applicable to other industries.

The effects of potentiallydisruptive technology on business model - a case study of new technologies in ICT industry

This study examines how firms interpret new, potentially disruptive technologies in their own strategic context. The work presents a cross-case analysis of four potentially disruptive technologies or technical operating models: Bluetooth, WLAN, Grid computing and Mobile Peer-to-peer paradigm. The technologies were investigated from the perspective of three mobile operators, a device manufacturer and a software company in the ICT industry. The theoretical background for the study consists of the resource-based view of the firm with dynamic perspective, the theories on the nature of technology and innovations, and the concept of business model. The literature review builds up a propositional framework for estimating the amount of radical change in the companies' business model with two middle variables, the disruptiveness potential of a new technology, and the strategic importance of a new technology to a firm. The data was gathered in group discussion sessions in each company. The results of each case analysis were brought together to evaluate, how firms interpret the potential disruptiveness in terms of changes in product characteristics and added value, technology and market uncertainty, changes in product-market positions, possible competence disruption and changes in value network positions. The results indicate that the perceived disruptiveness in terms ofproduct characteristics does not necessarily translate into strategic importance. In addition, firms did not see the new technologies as a threat in terms of potential competence disruption.

Coping with Technology: A Study on Economic Methodology and Strategic Management of Technology

There is a broad consensus among economists that technologicalchange has been a major contributor to the productivity growth and, hence, to the growth of the material welfare in western industrialized countries at least over the last century. Paradoxically, this issue has not been the focal point of theoretical economics. At the same time, we have witnessed the rise of the importance of technological issues at the strategic management level of business firms. Interestingly, the research has not accurately responded to this challenge either. The tension between the overwhelming empirical evidence of the importance of technology and its relative omission in the research offers a challenging target for a methodological endeavor. This study deals with the question of how different theories cope with technology and explain technological change. The focusis at the firm level and the analysis concentrates on metatheoretical issues, except for the last two chapters, which examine the problems of strategic management of technology. Here the aim is to build a new evolutionary-based theoreticalframework to analyze innovation processes at the firm level. The study consistsof ten chapters. Chapter 1 poses the research problem and contrasts the two basic approaches, neoclassical and evolutionary, to be analyzed. Chapter 2 introduces the methodological framework which is based on the methodology of isolation. Methodological and ontoogical commitments of the rival approaches are revealed and basic questions concerning their ways of theorizing are elaborated. Chapters 3-6 deal with the so-called substantive isolative criteria. The aim is to examine how different approaches cope with such critical issues as inherent uncertainty and complexity of innovative activities (cognitive isolations, chapter 3), theboundedness of rationality of innovating agents (behavioral isolations, chapter4), the multidimensional nature of technology (chapter 5), and governance costsrelated to technology (chapter 6). Chapters 7 and 8 put all these things together and look at the explanatory structures used by the neoclassical and evolutionary approaches in the light of substantive isolations. The last two cpahters of the study utilize the methodological framework and tools to appraise different economics-based candidates in the context of strategic management of technology. The aim is to analyze how different approaches answer the fundamental question: How can firms gain competitive advantages through innovations and how can the rents appropriated from successful innovations be sustained? The last chapter introduces a new evolutionary-based technology management framework. Also the largely omitted issues of entrepreneurship are examined.