Preparation and characterization of gas-filled liposomes:Can they improve oil recovery?

Although well known for delivering various pharmaceutical agents, liposomes can be prepared to entrap gas rather than aqueous media and have the potential to be used as pressure probes in magnetic resonance imaging (MRI). Using these gas-filled liposomes (GFL) as tracers, MRI imaging of pressure regions of a fluid flowing through a porous medium could be established. This knowledge can be exploited to enhance recovery of oil from the porous rock regions within oil fields. In the preliminary studies, we have optimized the lipid composition of GFL prepared using a simple homogenization technique and investigated key physico-chemical characteristics (size and the physical stability) and their efficacy as pressure probes. In contrast to the liposomes possessing an aqueous core which are prepared at temperatures above their phase transition temperature (Tc), homogenization of the phospholipids such as 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC) or 1,2-distearoyl-sn-glycero-3-phosphocoline (DSPC) in aqueous medium below their Tc was found to be crucial in formation of stable GFL. DSPC based preparations yielded a GFL volume of more than five times compared to their DPPC counter part. Although the initial vesicle sizes of both DSPC and DPPC based GFL were about 10 μm, after 7 days storage at 25°C, the vesicle sizes of both formulations significantly (p < 0.05) increased to 28.3 ± 0.3 μm and 12.3 ± 1.0 μm, respectively. When the DPPC preparation was supplemented with cholesterol at a 1:0.5 or 1:1 molar ratio, significantly (p < 0.05) larger vesicles were formed (12-13 μm), however, compared to DPPC only vesicles, both cholesterol supplemented formulations displayed enhanced stability on storage indicating a stabilizing effect of cholesterol on these gas-filled vesicles. In order to induce surface charge on the GFL, DPPC and cholesterol (1: 0.5 molar ratio) liposomes were supplemented with a cationic surfactant, stearylamine, at a molar ratio of 0.25 or 0.125. Interestingly, the ζ potential values remained around neutrality at both stearylamine ratios suggesting the cationic surfactant was not incorporated within the bilayers of the GFL. Microscopic analysis of GFL confirmed the presence of spherical structures with a size distribution between 1-8 μm. This study has identified that DSPC based GFL in aqueous medium dispersed in 2% w/v methyl cellulose although yielded higher vesicle sizes over time were most stable under high pressures exerted in MRI. Copyright © Informa Healthcare USA, Inc.

Preparation and characterisation of amino acids based trimethoprim salts

Trimethoprim (TMP) is a dihydrofolate reductase (DHFR) inhibitor which prevents the conversion of dihydrofolic acid into tetrahydrofolic acid, resulting in the depletion of the latter and leading to bacterial death. Oral bioavailability of TMP is hindered by both its low solubility and low permeability. This study aims to prepare novel salts of TMP using anionic amino acids; aspartic and glutamic acid as counter ions in order to improve solubility and dissolution. TMP salts were prepared by lyophilisation and characterized using FT-IR spectroscopy, proton nuclear magnetic resonance (1HNMR), Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TGA). Both the amino acids formed salts with TMP in a 1:1 molar ratio and showed a 280 fold improvement in solubility. Investigation of the microbiological activity of the prepared salts against TMP sensitive Escherichia coli showed that the new salts not only retained antibacterial activity but also exhibited higher zone of inhibition which was attributed to improved physicochemical characters such as higher solubility and dissolution. The results are an important finding that could potentially impact on faster onset of antibacterial activity and reduced therapeutic dose when administered to patients. Studies are underway investigating the effect of ion-pairing TMP with amino acids on the permeability profile of the drug.

Temperature effects on fatigue thresholds and structure sensitive crack growth in a nickel-base superalloy

Fatigue thresholds and slow crack growth rates have been measured in a powder formed nickel-base superalloy from room temperature to 600°C. Two grain sizes were investigated: 5-12 μm and 50 μm. It is shown that the threshold increases with grain size, and the difference is most pronounced at room temperature. Although crack growth rates increase with temperature in both microstructures, the threshold is only temperature dependent in the material with the larger grain size. It is also only in the latter that the room temperature threshold falls when the load ratio is increased from 0.1 to 0.5. At 600°C the higher load ratio causes a 20% reduction in the threshold irrespective of grain size. The results are discussed in terms of surface roughness and oxide-induced crack closure, the former being critically related to the type of crystallographic crack growth, which is in turn shown to be both temperature and stress intensity dependent. © 1983.

Sulphate-promotion and structure-sensitivity in hydrocarbon combustion over Rh2/AlO3 catalysts

A series of Rh2/AlO3 catalysts have been prepared using untreated or pre-sulphated alumina supports. The effect of support sulphation on catalyst activity towards propene and propane combustion has been explored as a function of Rh loading. Light-off temperatures for the total oxidation of both hydrocarbons decrease with increasing Rh content, associated with a transition from small oxidic clusters to large metallic Rh particles. Sulphate promotes both propene and propane combustion equally, with the magnitude of promotion exhibiting only a weak loading dependence. Enhanced catalytic performance is accompanied by Rh reduction and sintering. © 2006 Elsevier B.V. All rights reserved.

Transglutaminase overexpression sensitizes neuronal cell lines to apoptosis by increasing mitochondrial membrane potential and cellular oxidative stress

'Tissue' transglutaminase (tTG) selectively accumulates in cells undergoing apoptosis both in vivo and in vitro. Considering the central role played by mitochondria in apoptosis, we investigated the relationships existing amongst tTG expression, apoptosis and mitochondrial function. To this aim we studied the mechanisms of apoptosis in a neuronal cell line (SK-N-BE (2)) in which the tTG-expression was driven by a constitutive promoter. Furthermore, a tet-off inducible promoter was also used in 3T3 fibroblastic cells used as control. Both cell lines, when expressing tTG, appeared 'sensitized' to apoptosis. Strikingly, we found major differences in the morphological features of mitochondria among cell lines in the absence of apoptotic stimuli. In addition, these ultrastructural characteristics were associated with specific functional features: (i) constitutively hyperpolarized mitochondria and (ii) increased reactive oxygen intermediates production. Importantly, after mitochondrial-mediated apoptosis by staurosporine, a rapid loss of mitochondrial membrane potential was found in tTG cells only. Taken together, these results seem to suggest that, via hyperpolarization, tTG might act as a 'sensitizer' towards apoptotic stimuli specifically targeted to mitochondria. These results could also be of pathogenetic relevance for those diseases that are characterized by increased tTG and apoptotic rate together with impaired mitochondrial function, e.g. in some neurodegenerative disease.

Preparation and property testing of compatibilized poly(l-lactide)/thermoplastic polyurethane blends

Poly(l-lactide) (PLL) has been blended with a polycaprolactone-based thermoplastic polyurethane (TPU) elastomer as a toughening agent and a poly(l-lactide-co-caprolactone) (PLLCL) copolymer as a compatibilizer. Both 2-component (PLL/TPU) and 3-component (PLL/TPU/PLLCL) blends were prepared by melt mixing, characterized, hot-pressed into thin sheets and their tensile properties tested. The results showed that, although the TPU could toughen the PLL, the blends were largely immiscible leading to phase separation. However, addition of the PLLCL copolymer improved blend compatibility. The best all-round properties were found for the 3-component blend of composition PLL/TPU/PLLCL = 90/10/10 parts by weight.

Preparation and characterisation of novel polycaprolactone-chitosan blends

This research paper reports on the production of a biocompatible and biodegradable material to be used in a polymer stent used for counteracting the occurrence of anastomotic leakage following gastrointestinal surgery. Chitosan was blended with polycaprolactone in a solvent mixture of acetic acid and water. Membranes were formed with a range of 50/50%, 60/40%, 65/35%, 70/30% and 80/20% polycaprolactone/chitosan. The tensile properties of the blends were examined over a time period to access material degradation. In addition the biocompatibilities of the polycaprolactone/chitosan blends were tested for cytotoxic effect using primary tendon fibroblastic cells. This research concluded that the polycaprolactone/chitosan was non-toxic to the fibroblasts cells in-vitro. Analysis of the mechanical properties of the blends showed a range of mechanical strengths and polymer life spans. Overall, blends of 65/35%, 70/30% and 80/20% polycaprolactone/chitosan emerged as possible candidates for the production of a gastrointestinal stent. © 2011 Inderscience Enterprises Ltd.

Long-finned pilot whale population diversity and structure in Atlantic waters assessed through biogeochemical and genetic markers

Acknowledgements. Cetacean samples were collected under the auspices of stranding monitoring programs run by the Sociedade Portuguesa de Vida Selvagem, the Coordinadora para o Estudio dos Mamíferos Mariños (supported by the regional government Xunta de Galicia), the UK Cetacean Strandings Investigation Programme and the Scottish Agriculture College Veterinary Science Division (jointly funded by Defra and the Devolved Governments of Scotland and Wales), the Marine Mammals Research Group of the Institute of Marine Research (Norway), the Museum of Natural History of the Faroe Islands and the International Fund for Animal Welfare Marine Mammal Rescue and Research Program (USA). The authors thank all the members of these institutions and organizations for their assistance with data and sample collection. S.S.M., P.M.F. and M.F. were supported by PhD grants from the Fundação para a Ciência e Tecnologia (POPH/FSE ref SFRH/BD/ 38735/ 2007, SFRH/BD/36766/2007 and SFRH/BD/30240/ 2006, respectively). A.L. was supported by a postdoctoral grant from the Fundação para a Ciência e Tecnologia (ref SFRH/BPD/82407/2011). The work related to strandings and tissue collection in Portugal was partially supported by the SafeSea project EEAGrants PT 0039 (supported by Iceland, Liechtenstein and Norway through the EEA Financial Mechanism), the MarPro project Life09 NAT/PT/000038 (funded by the European Union program LIFE+) and the project CetSenti FCT RECI/AAG-GLO/0470/2012 (FCOMP- 01-0124-FEDER-027472) (funded by the program COMPETE and the Fundação para a Ciência e Tecnologia). G.J.P. thanks the University of Aveiro and Caixa Geral de Depósitos (Portugal) for financial support. The authors acknowledge the assistance of the chemical analysts at Marine Scotland Science with the fatty acid analysis.

Psychological preparation and postoperative outcomes for adults undergoing surgery under general anaesthesia

Sources of support Internal sources Manchester Centre for Health Psychology, University of Manchester, UK. An award of £2000 was received to support research assistant costs. External sources British Academy, UK. We received a small research grant of £7480 to support research assistant costs.

On the mobility, membrane location and functionality of mechanosensitive channels in Escherichia coli

We thank Frans Bianchi and Franz Ho for assistance with molecular cloning, Tim Rasmussen for providing the pTRC-MscK plasmid, Andrew Robinson for providing the pBAD-mEos3.2 plasmid, Matthias Heinemann for assistance with the flow cytometry measurements, Paul Schavemaker for performing Smoldyn simulations and Michiel Punter for programming ImageJ plugins for PALM reconstructions and single-particle tracking. We thank Ian Booth for critical reading of the manuscript, and Christoffer Åberg and Matteo Gabba for valuable discussions. The authors would like to thank David Dryden and Marcel Reuter for performing preliminary experiments from which this work has been built. The work was funded by the EU FP7 ITN-network program NICHE.

Long-finned pilot whale population diversity and structure in Atlantic waters assessed through biogeochemical and genetic markers

Acknowledgements. Cetacean samples were collected under the auspices of stranding monitoring programs run by the Sociedade Portuguesa de Vida Selvagem, the Coordinadora para o Estudio dos Mamíferos Mariños (supported by the regional government Xunta de Galicia), the UK Cetacean Strandings Investigation Programme and the Scottish Agriculture College Veterinary Science Division (jointly funded by Defra and the Devolved Governments of Scotland and Wales), the Marine Mammals Research Group of the Institute of Marine Research (Norway), the Museum of Natural History of the Faroe Islands and the International Fund for Animal Welfare Marine Mammal Rescue and Research Program (USA). The authors thank all the members of these institutions and organizations for their assistance with data and sample collection. S.S.M., P.M.F. and M.F. were supported by PhD grants from the Fundação para a Ciência e Tecnologia (POPH/FSE ref SFRH/BD/ 38735/ 2007, SFRH/BD/36766/2007 and SFRH/BD/30240/ 2006, respectively). A.L. was supported by a postdoctoral grant from the Fundação para a Ciência e Tecnologia (ref SFRH/BPD/82407/2011). The work related to strandings and tissue collection in Portugal was partially supported by the SafeSea project EEAGrants PT 0039 (supported by Iceland, Liechtenstein and Norway through the EEA Financial Mechanism), the MarPro project Life09 NAT/PT/000038 (funded by the European Union program LIFE+) and the project CetSenti FCT RECI/AAG-GLO/0470/2012 (FCOMP- 01-0124-FEDER-027472) (funded by the program COMPETE and the Fundação para a Ciência e Tecnologia). G.J.P. thanks the University of Aveiro and Caixa Geral de Depósitos (Portugal) for financial support. The authors acknowledge the assistance of the chemical analysts at Marine Scotland Science with the fatty acid analysis.