921 resultados para graphical overlay
Resumo:
In this paper we discuss the use of digital data by the Swiss Federal Criminal Court in a recent case of attempted homicide. We use this case to examine drawbacks for the defense when the presentation of scientific evidence is partial, especially when the only perspective mentioned is that of the prosecution. We tackle this discussion at two distinct levels. First, we pursue an essentially non-technical presentation of the topic by drawing parallels between the court's summing up of the case and flawed patterns of reasoning commonly seen in other forensic disciplines, such as DNA and particle traces (e.g., gunshot residues). Then, we propose a formal analysis of the case, using elements of probability and graphical probability models, to justify our main claim that the partial presentation of digital evidence poses a risk to the administration of justice in that it keeps vital information from the defense. We will argue that such practice constitutes a violation of general principles of forensic interpretation as established by forensic science literature and current recommendations by forensic science interest groups (e.g., the European Network of Forensic Science Institutes). Finally, we posit that argument construction and analysis using formal methods can help replace digital evidence appropriately into context and thus support a sound evaluation of the evidence.
Resumo:
Objective:To investigate the effects of dilution of paramagnetic contrast agent with iodinated contrast and xylocaine on the signal intensity during magnetic resonance arthrography, and to improve the paramagnetic contrast agent concentration utilized in this imaging modality.Materials and Methods:Samples specially prepared for the study with three different concentrations of paramagnetic contrast agent diluted in saline, iodinated contrast agent and xylocaine were imaged with fast spin echo T1-weighted sequences with fat saturation. The samples were placed into flasks and graphical analysis of the signal intensity was performed as a function of the paramagnetic contrast concentration.Results:As compared with samples of equal concentrations diluted only with saline, the authors have observed an average signal intensity decrease of 20.67% for iodinated contrast agent, and of 28.34% for xylocaine. However, the increased gadolinium concentration in the samples caused decrease in signal intensity with all the dilutions.Conclusion:Minimizing the use of iodinated contrast media and xylocaine and/or the use of a gadolinium concentration of 2.5 mmol/L diluted in saline will improve the sensitivity of magnetic resonance arthrography.
Resumo:
The general aim of this paper is to explore and illustrate the role of the physical and psychological surrounding in narrative making ofthe personal identity. A qualitative study is put forward. It consists of a reduced version of the autobiographical multi-methodology(Bagnoli, 2004). That has been applied to a sample of six students of the Universidad Intercultural de Chiapas. The specific goals are: a) to illustrate, through citations obtained from interviews and graphical material, the theoretical concepts of attachment to theplace (Pol, 2002; Vidal y colaboradores, 2004) and community sense (Kim y Kaplan, 2004); and b) to detect the most relevantfactors of such concepts manifested in the students. Data was analyzed through the Atlas.ti computer program, version 5.0 (Muñoz, 2005). The findings suggest that sense of connection and participation in the community (action - transformation) has been observed as the most significant factors in our studied sample
Resumo:
This Master's thesis addresses the design and implementation of the optical character recognition (OCR) system for a mobile device working on the Symbian operating system. The developed OCR system, named OCRCapriccio, emphasizes the modularity, effective extensibility and reuse. The system consists of two parts which are the graphical user interface and the OCR engine that was implemented as a plug-in. In fact, the plug-in includes two implementations of the OCR engine for enabling two types of recognition: the bitmap comparison based recognition and statistical recognition. The implementation results have shown that the approach based on bitmap comparison is more suitable for the Symbian environment because of its nature. Although the current implementation of bitmap comparison is lacking in accuracy, further development should be done in its direction. The biggest challenges of this work were related to developing an OCR scheme that would be suitable for Symbian OS Smartphones that have limited computational power and restricted resources.
Resumo:
We analyse vibrational frequencies of 168 compounds with the AM1 model concerning its experimentally observed gaseous frequencies. Stretching of CH, NH, OH and CO bonds, its related bending frequencies, and the CC frame movements are the studied vibrations. The results show problems with the AM1 vibrational splittings. Often symmetric stretching frequencies, like in CH3, CH2 and NH3, appear switched with the corresponding antisymmetrical ones. Among the studied vibrations many stretchings are overestimated, while bendings oscillate around experimental values. Fluorine stretchings, NN, OO, CH, double and triples CC bonds and cyclic hydrocarbon breathing modes are always overestimated while torsions, umbrella modes and OH/SH stretching are, in average, underestimated. Graphical analysis show that compounds with the lowest molecular masses are the ones with the largest difference to the experimental values. From our results it is not possible to fit confortably the calculated frequencies by a simple linear relationship of the type, n(obs)=a*n(AM1). Better aggreement is obtained when different curves are adjusted for the stretching and bending modes, and when a complete linear function is used. Among our studies the best obtained statistical results are for CH, NH and OH. The conclusions obtained in this work will improve the AM1 calculated frequencies leading to accurate results for these properties.
Resumo:
En aquest projecte s’ha creat una aplicació d’ús mèdic que permet veure l’eficàcia dels tractament aplicats a pacient que pateixen de dismenorrea. Aquesta aplicació està dissenyada per a ser utilitzada per a dos tipus d’usuaris, el pacient que és l’encarregat d’introduir la informació sobre els seus símptomes en els moments que aquests apareixen, i l’investigador que analitza aquesta informació per a avaluar els tractaments utilitzats. L’aplicació consta d’un entorn amigable que facilita l’ús per part dels usuaris. La seva interfície web permet a l’investigador visualitzar les dades i exportar-les per a ser utilitzades en aplicacions estadístiques, i per altra banda, també ofereix la possibilitat al pacient de fer un seguiment de l’evolució dels seus símptomes a través de gràfiques.
Resumo:
Parametriset NURBS-käyrät ja -pinnat ovat yleisiä työkaluja graafisessa mallinnuksessa, tietokoneavusteisessa suunnittelussa ja muissa sovelluksissa. NURBS-mallinnus on pääosin melko intuitiivista, mutta siinä on joitakin vaikeammin ymmärrettäviä osia. Ihminen oppii parhaiten tekemällä, minkä takia päätettiin tehdä interaktiivinen NURBS-opetussovelma, joka tutustuttaa käyttäjän NURBSien toimintaan. Sovelma toimii www-selaimessa Java-liitännäisen avulla ja hyödyntää Java OpenGL -grafiikkarajapintaa kolmiulotteisen grafiikan piirtämiseen. Sovelma on helppokäyttöinen ja opastaa käyttäjää NURBS-mallinnuksen eri osa-alueissa.
Resumo:
El artículo trata de las contribuciones autobiográficas de lingüistas a la historiografía. Considera la autobiografía como una fuente documental de la corriente narrativa de la historiografía. Hace un inventario de los repertorios de autobiografías: Davis & O"Cain 1980, Koerner , 1991, 1998; López Alonso & Séré , 1992; Swiggers , 1997; Brown & Law, 2002; Timotin & Colceriu, 2012; Laborda, Romera & Fernández Planas, 2014 . Y considera sus aspectos cognitivos, literarios y textuales. A plica como modelo analítico la teoría del dramatismo y de los constituyentes del relato de Jerome Bruner. El estudio argumenta sobre la idoneidad de la autobiografía para narrar la trayectoria vital del autor y trazar el panorama de la lingüística contemporánea. Y revela el valor polifacético de la escritura del Yo como literatura, documento científico y fuente de información social."Historiography and memory of linguistics in autobiographies of linguistics The paper discusses the autobio graphical historiography of linguistics contributions. The autobiography is a source of the narrative aspect of historiography. In the paper a list of autobiographies of linguists is made (Davis & O"Cain 1980,Koerner 1991 y 1998, López Alonso & Séré 1992, Swiggers 1997, Brown & Law 2002, Timotin & Colceriu 2012, Laborda, Romera & Fernández Planas 2014) to consider their cognitive, literary and textual aspects .The article applies the theory as an analytical model of the drama and of the constituents of the story by Jerome Bruner. The study confirms the suitability of the autobiography to tell the life story of the author and to describe the landscape of contemporary linguistics.
Resumo:
Four different pseudopotentials and three methodologies were employed in the calculation of the geometry and the frequencies of metal complexes like [M(NH3)2X2] [X=halogen, M=Zn, Cd], and [Hg(NH3)2]Cl2. The vibrational assignments were carefully checked and compared to the theoretically calculated ones. Graphical procedures were employed to estimate family errors and their average behavior. The calculated results show the SBK-X basis set with the best results for the geometries and calculated frequencies, for individual species and statistical results. Its use is recommend, mainly if the neighborhood atoms are described with similar pseudopotentials. Excellent results were also obtained with the Hay and Wadt pseudopotential.
Resumo:
It is well known that regression analyses involving compositional data need special attention because the data are not of full rank. For a regression analysis where both the dependent and independent variable are components we propose a transformation of the components emphasizing their role as dependent and independent variables. A simple linear regression can be performed on the transformed components. The regression line can be depicted in a ternary diagram facilitating the interpretation of the analysis in terms of components. An exemple with time-budgets illustrates the method and the graphical features
Resumo:
Tämä diplomityö käsittelee teollisen yrityksen tuotannonohjauksen kehittämistä piensarjatuotannossa. Työn kohteena on ABB Oy:n Tuulivoimageneraattorit-tulosyksikkö, joka valmistaa vakiotuotteita asiakasohjautuvasti. Työssä esitellään aluksi tuotannon ja tuotannonohjauksen teoriaa. Lävitse käydään perusasioiden kuten määritelmien, tavoitteiden ja tehtävien lisäksi tuotannonohjausprosessia sekä tuotannonohjauksen tietotekniikkaa. Teorian jälkeisessä empiriaosuudessa esitellään työssä kehitettyjä keinoja tuotannonohjauksen parantamiseksi. Tutkimus on toteutettu teoreettisen ja empiirisen tutkimustyön avulla. Teoreettiseen tutkimustyöhön sisältyi suomalaisiin ja ulkomaalaisiin kirjallisuuslähteisiin perehtyminen. Empiirinen tutkimustyö suoritettiin itsenäisen ongelman ratkaisutyön avulla. Tämä sisälsi kehittämiskohteiden analysoinnin, tarkempien kehittämistarpeiden määrityksen sekä kokeilujen kautta tapahtuneen kehittämistyön. Tutkimuksen päätavoitteena oli selvittää, miten tuotannonohjauksen kehittämisellä voidaan parantaa kohteena olevan tulosyksikön tuottavuutta ja kannattavuutta. Päätavoitteen pohjalta muodostettiin kuusi osatavoitetta: toimitusvarmuuden parantaminen, kapasiteetin kuormitusasteen nostaminen, kapasiteetin suunnittelun kehittäminen, läpäisyaikojen lyhentäminen, uuden ERP-järjestelmän vaatimusmäärittely sekä tuotannonohjausprosessin määrittäminen. Työssä rakennettiin neljään ensiksi mainittuun osatavoitteeseen tietotekniset sovellukset, jotka mahdollistavat osatavoitteiden suunnittelun ja ohjaamisen. Sovelluksia varten kullekin tuotteelle määriteltiin esimerkiksi työnvaiheketjut läpäisyaikoineen, kuormitusryhmät, kuormitusryhmien kapasiteetit, tuotteiden kuormittavuudet sekä kriittiset työvälineet. Työ osoitti, että tietotekniikka auttaa suuresti tuotannonohjauksessa. Lisääntynyt läpinäkyvyys, parantunut tiedonkulku, simulointimahdollisuudet sekä graafinen esitystapa helpottavat erilaisten suunnitelmien teossa ja parantavat siten päätöksenteon laatua. Tietotekniikan hyväksikäytön pohjana toimii tuotannon perus- ja tapahtumatietojen kurinalainen päivitys. Tämän vuoksi tietojärjestelmistä kannattaa rakentaa mahdollisimman yksinkertaisia.
Resumo:
The city of Tarragona houses an important architectural heritage mainly from its past as ‘Tarraco’, capital of the Roman province of Hispania Citerior, but also from its medieval and late 19th century history. The archaeological ensemble of Tarraco was inscribed as a UNESCO World Heritage Site in 2000, but although many efforts have been devoted by archaeologists and historians to unveil and understand the history and aspect of the Roman city, many aspects remain unknown. This is largely caused by the absence of a coherent body of historiographical material, which is todays cattered across several institutions and, specially, the lack of precise and useful graphical representations of the remains and of the existing city that allows in-depth analysis and interpretations of future findings. In recent years, researchers from the Catalan Institute of Classical Archaeology (ICAC) and the Architecture School of the URV (ETSA) have teamed up to produce comprehensive, detailed graphic materials, including a new set of plans and sections of the old city, of the grandiose areas of representation of the Provincial capital, and of the hidden structures beneath the city’s surface. These have been executed with the latest technologies (fotogrammetry, laser scanning) but also with traditional methods (measurement, topography), on t op of a mixture of existing materials (hand-drafted cartography from municipal master plans) and of historical and archaeological documentation.
Resumo:
The aim of this project is to accomplish an application software based on Matlab to calculate the radioelectrical coverage by surface wave of broadcast radiostations in the band of Medium Wave (WM) all around the world. Also, given the location of a transmitting and a receiving station, the software should be able to calculate the electric field that the receiver should receive at that specific site. In case of several transmitters, the program should search for the existence of Inter-Symbol Interference, and calculate the field strenght accordingly. The application should ask for the configuration parameters of the transmitter radiostation within a Graphical User Interface (GUI), and bring back the resulting coverage above a map of the area under study. For the development of this project, it has been used several conductivity databases of different countries, and a high-resolution elevation database (GLOBE). Also, to calculate the field strenght due to groundwave propagation, it has been used ITU GRWAVE program, which must be integrated into a Matlab interface to be used by the application developed.
Resumo:
Tot seguit presentem un entorn per analitzar senyals de tot tipus amb LDB (Local Discriminant Bases) i MLDB (Modified Local Discriminant Bases). Aquest entorn utilitza funcions desenvolupades en el marc d’una tesi en fase de desenvolupament. Per entendre part d’aquestes funcions es requereix un nivell de coneixement avançat de processament de senyals. S’han extret dels treballs realitzats per Naoki Saito [3], que s’han agafat com a punt de partida per la realització de l’algorisme de la tesi doctoral no finalitzada de Jose Antonio Soria. Aquesta interfície desenvolupada accepta la incorporació de nous paquets i funcions. Hem deixat un menú preparat per integrar Sinus IV packet transform i Cosine IV packet transform, tot i que també podem incorporar-n’hi altres. L’aplicació consta de dues interfícies, un Assistent i una interfície principal. També hem creat una finestra per importar i exportar les variables desitjades a diferents entorns. Per fer aquesta aplicació s’han programat tots els elements de les finestres, en lloc d’utilitzar el GUIDE (Graphical User Interface Development Enviroment) de MATLAB, per tal que sigui compatible entre les diferents versions d’aquest programa. En total hem fet 73 funcions en la interfície principal (d’aquestes, 10 pertanyen a la finestra d’importar i exportar) i 23 en la de l’Assistent. En aquest treball només explicarem 6 funcions i les 3 de creació d’aquestes interfícies per no fer-lo excessivament extens. Les funcions que explicarem són les més importants, ja sigui perquè s’utilitzen sovint, perquè, segons la complexitat McCabe, són les més complicades o perquè són necessàries pel processament del senyal. Passem cada entrada de dades per part de l’usuari per funcions que ens detectaran errors en aquesta entrada, com eliminació de zeros o de caràcters que no siguin números, com comprovar que són enters o que estan dins dels límits màxims i mínims que li pertoquen.