882 resultados para grades
Resumo:
Le TDAH persiste jusqu’à l’âge adulte dans la majorité des cas. Les jeunes ayant un TDAH sont plus à risque de sous-performance et de décrochage scolaires. Ils présentent également des déficits organisationnels, tel qu’une difficulté à planifier et compléter leurs devoirs. Sans interventions appropriées, ils sont à risque de difficultés importantes au secondaire. La présente étude vise à évaluer l’effet d’une intervention multimodale, Projet TRANSITION, sur l’engagement et le rendement scolaires des jeunes ayant un TDAH. L’échantillon était composé de 47 familles, réparties aléatoirement entre un groupe participant à l’intervention et un groupe contrôle. A la fin de secondaire 1, les jeunes ayant participé ou non à l’intervention ne se distinguent pas quant à la qualité de leur engagement scolaire (cognitif, affectif, comportemental). À la fin du secondaire 1, il n’y a pas de différence significative entre les groupes au niveau des difficultés en lecture ou mathématiques rapportées par le jeune ou le parent, de l’écart à la moyenne de la classe selon le bulletin, et du rendement scolaire par rapport aux autres élèves de leur classe rapporté par le jeune. Cependant, les parents perçoivent que les jeunes ayant participé à l’intervention présentent un meilleur rendement scolaire par rapport aux autres élèves de leur classe en comparaison aux jeunes du groupe contrôle.
Resumo:
Ce projet de recherche a pour but d’examiner dans quelle mesure l’implication des parents dans le cheminement scolaire de leur enfant est susceptible de modérer la relation entre le désengagement scolaire de l’élève et la détérioration de son rendement scolaire au début du secondaire. L’échantillon est composé de 380 élèves de première et troisième secondaire de la région de Montréal. Lors de cette étude longitudinale, le rendement scolaire a été évalué en première et troisième secondaire. Le niveau de désengagement comportemental et les comportements de soutien parental reliés aux activités scolaires ont été évalués en première secondaire. Les résultats démontrent que les comportements de soutien parental reliés aux activités scolaires constituent un facteur protecteur qui modère la relation entre le désengagement comportemental et le rendement scolaire ultérieur, mais seulement chez les élèves qui avaient initialement un rendement scolaire élevé en secondaire 1. Les résultats obtenus ne permettent toutefois pas de rendre compte du caractère protecteur de l’implication parentale chez les élèves à risque qui présentent un plus faible rendement scolaire en secondaire 1.
Resumo:
Les objectifs de cette étude étaient (1) de décrire la localisation et la sévérité des lésions d’ostéoarthrose (OA) chroniques acquises naturellement au niveau du grasset équin grâce à l’échographie (US), la radiographie (XR), la tomodensitométrie (CT) et l’évaluation macroscopique (ME), (2) de comparer la performance diagnostique de chacune des modalities d’imagerie avec ME et (3) d’évaluer quantitativement la densité osseuse sous-chondrale lors d’OA du grasset chez le cheval à la tomodensitométrie. Des évaluations post mortem radiographique, tomodensitométrique et échographique ont été réalisées sur 23 grassets cadavériques et comparées à l’évaluation macroscopique. Des associations significatives ont été notées entre le «osteophytes global score» de toutes les modalités (US, p=0.04; XR, p=0.005; CT, p˂0.0001) et ME. De plus, la tomodensitométrie a démontré la plus forte association. Les ostéophytes étaient principalement localisés au niveau de l’articulation fémorotibiale médiale et cette articulation présentait également les scores d’ostéophytes les plus sévères. Un patron spécifique d’ostéophytes associé à l’insertion de la capsule articulaire sur le condyle fémoral médial a été mis en évidence. La nouvelle projection radiographique (Ca10Pr5L-CrDiMO) a été utile dans la détection des ostéophytes de la région intercondylaire. Les grades d’ostéophytes (0-3) ne différaient pas significativement selon la modalité dans la majorité des sites. La faible sensibilité/spécificité a indiqué que la sclérose de l’os sous-chondral et l’applatissement des condyles fémoraux ne semblent pas être des indicateurs fiables d’OA du grasset équin. L’OA du grasset équin est associée à une réduction de la densité osseuse sous-chondrale et des sites spécifiques de résorption/kystes sous-chondraux ont été notés chez certains spécimens.
Resumo:
Background: Literature on scoliosis screening is vast, however because of the observational nature of available data and methodological flaws, data interpretation is often complex, leading to incomplete and sometimes, somewhat misleading conclusions. The need to propose a set of methods for critical appraisal of the literature about scoliosis screening, a comprehensive summary and rating of the available evidence appeared essential. METHODS: To address these gaps, the study aims were: i) To propose a framework for the assessment of published studies on scoliosis screening effectiveness; ii) To suggest specific questions to be answered on screening effectiveness instead of trying to reach a global position for or against the programs; iii) To contextualize the knowledge through expert panel consultation and meaningful recommendations. The general methodological approach proceeds through the following steps: Elaboration of the conceptual framework; Formulation of the review questions; Identification of the criteria for the review; Selection of the studies; Critical assessment of the studies; Results synthesis; Formulation and grading of recommendations in response to the questions. This plan follows at best GRADE Group (Grades of Recommendation, Assessment, Development and Evaluation) requirements for systematic reviews, assessing quality of evidence and grading the strength of recommendations. CONCLUSIONS: In this article, the methods developed in support of this work are presented since they may be of some interest for similar reviews in scoliosis and orthopaedic fields.
Resumo:
Cette thèse a été réalisée, entre autres, grâce à une subvention reçue du Fonds de recherche du Québec – Société et culture et de son partenaire le ministère de l’Éducation, du Loisir et du Sport (MELS) Les analyses contenues dans cette thèse ont été réalisées au Centre interuniversitaire québécois de statistiques sociales (CIQSS), membre du Réseau canadien des centres de données de recherche (RCCDR). Les activités du CIQSS sont rendues possibles grâce à l’appui financier du CRSHC, des IRSC, de la FCI, de Statistique Canada, du FRQSC ainsi que de l’ensemble des universités québécoises qui participent à leur financement. Les idées exprimées dans ce texte sont celles des auteurs et non celles des partenaires financiers.
Resumo:
Plusieurs conditions allergiques, dont certains phénotypes d’asthme et le souffle équin, sont caractérisées par une infiltration neutrophilique. L’interleukine-4 (IL-4), une cytokine clé de la réponse allergique, pourrait contribuer au recrutement de ces cellules inflammatoires lors de ces pathologies. L’objectif de cette étude était d’évaluer si l’administration sous-cutanée d’IL-4 chez des chevaux sains favorise une réponse neutrophilique locale. Trois études ont été réalisées pour 1) évaluer l’effet de concentrations cytokiniques différentes (10 ng, 250 ng et 500 ng) et 2) évaluer l’effet de la durée d'incubation (3 h, 6 h, 12 h, 48 h et 7 jours) sur le recrutement des neutrophiles chez 18 chevaux sains. Le matrigel, une matrice protéique solubilisée, a servi de véhicule pour l’administration des cytokines. Un grade histologique semi-quantitatif a été élaboré pour évaluer la neutrophilie tissulaire pour toutes les études, mais nous avons, en outre, ajouté une analyse par cytométrie de flux dans la troisième étude pour valider les grades histologiques. Nos résultats démontrent que 1) l'IL-4 ne parvient pas à induire une migration neutrophilique significative dans les tissus sous-cutanés de chevaux sains ; 2) la cytométrie de flux s’est révélée être une méthode plus fiable pour estimer la migration des neutrophiles en comparaison avec l'analyse moins sensible des scores histologiques. Nous avons de plus observé que 3) le matrigel entraîne une réaction inflammatoire potentiellement de nature immunogène chez les chevaux. Cette étude est la première incorporant le matrigel et IL-4 dans un protocole in vivo impliquant des chevaux. Ces données suggèrent que l’IL-4 seule ne permet pas le recrutement sous-cutané de neutrophiles chez des chevaux sains.
Resumo:
Blends of chlorobutyl rubber (CIIR) with two grades of ethylene-propylene diene monomer rubber (EPDM) were prepared and the effect of blend ratio on the cure characteristics, hot air ageing resistance, steam ageing resistance, and mechanical properties were evaluated. The blend of CIIR with EPDM grade 301 T showed additive behavior and the blend with the other grade of EPDM (NDR 4640) showed synergistic behavior.
Resumo:
Selected grades of low density polyethylene (LDPE) polystyrene (PS) were extruded in a laboratory extruder by varying the feeding rate at different revolutions per minute and temperatures. The mechanical properties of the extruded plastic sheets were determined. LDPE shows a marked variation in mechanical properties with feeding rate while PS shows a marginal change in mechanical properties with feeding rate. However, for both plastics there is a particular feeding rate in the starved region which results in maximum mechanical properties.
Resumo:
The principal objective of this study was to explore the compatibility of a blend of two synthetic elastomers viz., ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR). Various commercial grades of EPDM were blended with a specific grade of CIIR at different proportions. The mechanical properties such as tensile strength, tear strength, ageing resistance, etc. were studied. On the basis of the observed physical properties, two particular grades of EPDM were found to be compatible with CIIR. Differential scanning calorimetry and scanning electron microscopy confirmed the results. Chlorosulphonated polyethylene was added as a compatibilizing agent to overcome the phase separation of the other two incompatible grades of EPDM in blending with CIIR. The results revealed that the addition of compatibilizer greatly improves the compatibility and thereby the properties of the blends.
Resumo:
A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope.
Resumo:
Concrete is a universal material in the construction industry. With natural resources like sand and aggregate, fast depleting, it is time to look for alternate materials to substitute these in the process of making concrete. There are instances like exposure to solar radiation, fire, furnaces, and nuclear reactor vessels, special applications like missile launching pads etc., where concrete is exposed to temperature variations In this research work, an attempt has been made to understand the behaviour of concrete when weathered laterite aggregate is used in both conventional and self compacting normal strength concrete. The study has been extended to understand the thermal behaviour of both types of laterised concretes and to check suitability as a fire protection material. A systematic study of laterised concrete considering parameters like source of laterite aggregate, grades of Ordinary Portland Cement (OPC) and types of supplementary cementitious materials (fly ash and GGBFS) has been carried out to arrive at a feasible combination of various ingredients in laterised concrete. A mix design methodology has been proposed for making normal strength laterised self compacting concrete based on trial mixes and the same has also been validated. The physical and mechanical properties of laterised concretes have been studied with respect to different variables like exposure temperature (200°C, 400°C and 600°C) and cooling environment (air cooled and water cooled). The behaviour of ferrocement elements with laterised self compacting concrete has also been studied by varying the cover to mesh reinforcement (10mm to 50mm at an interval of 10mm), exposure temperature and cooling environment.
Resumo:
Cerebral glioma is the most prevalent primary brain tumor, which are classified broadly into low and high grades according to the degree of malignancy. High grade gliomas are highly malignant which possess a poor prognosis, and the patients survive less than eighteen months after diagnosis. Low grade gliomas are slow growing, least malignant and has better response to therapy. To date, histological grading is used as the standard technique for diagnosis, treatment planning and survival prediction. The main objective of this thesis is to propose novel methods for automatic extraction of low and high grade glioma and other brain tissues, grade detection techniques for glioma using conventional magnetic resonance imaging (MRI) modalities and 3D modelling of glioma from segmented tumor slices in order to assess the growth rate of tumors. Two new methods are developed for extracting tumor regions, of which the second method, named as Adaptive Gray level Algebraic set Segmentation Algorithm (AGASA) can also extract white matter and grey matter from T1 FLAIR an T2 weighted images. The methods were validated with manual Ground truth images, which showed promising results. The developed methods were compared with widely used Fuzzy c-means clustering technique and the robustness of the algorithm with respect to noise is also checked for different noise levels. Image texture can provide significant information on the (ab)normality of tissue, and this thesis expands this idea to tumour texture grading and detection. Based on the thresholds of discriminant first order and gray level cooccurrence matrix based second order statistical features three feature sets were formulated and a decision system was developed for grade detection of glioma from conventional T2 weighted MRI modality.The quantitative performance analysis using ROC curve showed 99.03% accuracy for distinguishing between advanced (aggressive) and early stage (non-aggressive) malignant glioma. The developed brain texture analysis techniques can improve the physician’s ability to detect and analyse pathologies leading to a more reliable diagnosis and treatment of disease. The segmented tumors were also used for volumetric modelling of tumors which can provide an idea of the growth rate of tumor; this can be used for assessing response to therapy and patient prognosis.
Resumo:
Low-density polyethylene, (LDPE) was mixed with two grades of tapioca starch–lowgrade and high-grade. Various compositions were prepared and mechanical and thermal studies performed. The biodegradability of these samples was checked using a culture medium containing Vibrios (an amylase-producing bacteria), which was isolated from a marine benthic environment. The soil burial test and reprocessability of these samples were checked. The studies on biodegradability show that these blends are partially biodegradable. These low-density polyethylene-starch blends are reprocessable without sacrificing much of their mechanical properties
Resumo:
The textile industry is one amongst the rapidly growing industries world wide, which utilizes enormous amounts of synthetic dyes. Consequently, the effluent from these textile industries poses serious threat to the environment which is often very difficult to treat and dispose. This has become a very grave problem in environment conservation and hence natural pigments have drawn the attention of industry as safe alternative. In this context, in the present study an attempt was made to bioprospect marine bacteria towards isolation of a suitable and ideal pigment that could be used as a natural dye. A marine Serratia sp. BTWJ8 was recognized to synthesize enormous amounts of a prodigiosin-like pigment. The pigment was isolated and characterized for various properties. The pigment was evaluated for application as a dye in the textile industry. Results of the studies indicated that this pigment could be used as a natural dye for imparting red-yellow colour to various grades of textile materials. The colour was observed to be stable after wash performance studies
Resumo:
Scanning Probe Microscopy (SPM) has become of fundamental importance for research in area of micro and nano-technology. The continuous progress in these fields requires ultra sensitive measurements at high speed. The imaging speed limitation of the conventional Tapping Mode SPM is due to the actuation time constant of piezotube feedback loop that keeps the tapping amplitude constant. In order to avoid this limit a deflection sensor and an actuator have to be integrated into the cantilever. In this work has been demonstrated the possibility of realisation of piezoresistive cantilever with an embedded actuator. Piezoresistive detection provides a good alternative to the usual optical laser beam deflection technique. In frames of this thesis has been investigated and modelled the piezoresistive effect in bulk silicon (3D case) for both n- and p-type silicon. Moving towards ultra-sensitive measurements it is necessary to realize ultra-thin piezoresistors, which are well localized to the surface, where the stress magnitude is maximal. New physical effects such as quantum confinement which arise due to the scaling of the piezoresistor thickness was taken into account in order to model the piezoresistive effect and its modification in case of ultra-thin piezoresistor (2D case). The two-dimension character of the electron gas in n-type piezoresistors lead up to decreasing of the piezoresistive coefficients with increasing the degree of electron localisation. Moreover for p-type piezoresistors the predicted values of the piezoresistive coefficients are higher in case of localised holes. Additionally, to the integration of the piezoresistive sensor, actuator integrated into the cantilever is considered as fundamental for realisation of fast SPM imaging. Actuation of the beam is achieved thermally by relying on differences in the coefficients of thermal expansion between aluminum and silicon. In addition the aluminum layer forms the heating micro-resistor, which is able to accept heating impulses with frequency up to one megahertz. Such direct oscillating thermally driven bimorph actuator was studied also with respect to the bimorph actuator efficiency. Higher eigenmodes of the cantilever are used in order to increase the operating frequencies. As a result the scanning speed has been increased due to the decreasing of the actuation time constant. The fundamental limits to force sensitivity that are imposed by piezoresistive deflection sensing technique have been discussed. For imaging in ambient conditions the force sensitivity is limited by the thermo-mechanical cantilever noise. Additional noise sources, connected with the piezoresistive detection are negligible.