Explaining Pathe's global dominance in the pre-Hollywood film industry

For almost a decade before Hollywood existed, French firm Pathe towered over the early film industry with estimates of its share of all films sold around the world varying between 50-70%. This paper analyses Pathe’s rise to market leadership by applying a theoretical framework drawn from the business literature on causes of industry dominance, that provides insights into how firms acquire and maintain market dominance. This paper uses evidence presented by film historians to argue that Pathe “fits” the expected theoretical model of the dominant firm because it had a marketing orientation, used an effective quality- based competitive strategy and possessed the six critical strategic marketing capabilities that business research shows enable the best performing firms to consistently outperform rivals.

Improving quality management system implementation in Indonesian construction companies

As the Indonesian construction industry is now promising to become the engine of national economic development, achieving quality and higher performance, not only domestically but also in the international market, are becoming crucial issues. Implementing quality management systems (QMSs) based on ISO 9001 are important in helping Indonesian construction companies become more competitive, for it is acknowledged that quality in construction is a major concern in the global construction industry. However, the possession of ISO 9001 certification does not reflect the presence of a well-operated QMS, which is capable of giving customer and project end-users satisfaction. The review of literature found that there is a significant correlation between a company.s organisational culture and the quality performance of contractors. While research into this area has involved many researchers, there is no critical mass of information specifically related to the Indonesian situation. Studies based on contemporary perspectives of the characteristics of the Indonesian construction organisational culture using Cameron and Quinn.s Organizational Culture Assessment Instrument (OCAI) and its relationship with the contractor.s ISO 9001 practices, have not been previously undertaken. This thesis research, therefore, investigated the culture profiles in Indonesian construction organisations, together with the current implementation of ISO 9001 and their performance during implementing QMSs, as information in these areas has a bearing on the poor performance and low levels of competitiveness of Indonesian construction companies. Questionnaire surveys were distributed to selected representative grade 7 civil engineering contractors located in the two provincial capitals of Makassar and Manado, and the national capital, Jakarta, in order to collect responses designed to examine the effectiveness of their QMSs implementation. The survey also aimed to identify current problems within the systems, and examine the performance of companies while implementing their QMSs. The questionnaire contained questions to assess the organisational culture profiles of Indonesian construction companies, adopting the OCAI. The survey results were then used to analyse the influence of different organisational culture profiles on QMSs implementation among respondent companies. The results from the questionnaire survey supported the development of a Culture-based Quality Management System Improvement Implementation Framework, designed to help Indonesian construction companies identify some typical barriers associated with impacting on effective QMSs implementation; to assist them to develop cultural values that can drive effective QMSs implementation; to undertake effective QMSs practices; and to recognise the potential results and longer-term benefits obtainable from implementing effective QMSs. A Focus Group Discussion was conducted with the assistance of a panel of professional construction practitioners, policy makers and academic experts, which further considered and validated the usefulness and applicability of the framework. Based on the outcome from this discussion and on the results of the earlier data analysis, a final version of the framework was developed to assist Indonesian construction companies in improving their capability of construction project delivery, and thereby contribute to providing or improving the competitive advantage of Indonesian construction companies in the local, national and global construction market.

Which cultural values matter to business process management? Results from a global Delphi study

Purpose – Business process management (BPM) requires a holistic perspective that includes managing the culture of an organization to achieve objectives of efficient and effective business processes. Still, the specifics of a BPM-supportive organizational culture have not been examined so far. Thus, the purpose of this paper is to identify the characteristics of a cultural setting supportive of BPM objectives. Design/methodology/approach – The paper examines the constituent values of a BPM-supportive cultural setting through a global Delphi study with BPM experts from academia and practice and explore these values in a cultural value framework. Findings – The paper empirically identifies and defines four key cultural values supporting BPM, viz., customer orientation, excellence, responsibility, and teamwork. The paper discusses the relationships between these values and identifies a particular challenge in managing these seemingly competing values. Research limitations/implications – The identification and definition of these values represents a first step towards the operationalization (and empirical analysis) of what has been identified as the concept of BPM culture, i.e. a culture supportive of achieving BPM objectives. Practical implications – Identifying these cultural values provides the basis for developing an instrument that can measure how far an existing cultural context is supportive of BPM. This, in turn, is fundamental for identifying measures towards achieving a BPM culture as a necessary, yet not sufficient means to obtain BPM success. Originality/value – The paper examines which cultural values create an environment receptive for BPM and, thus, specifies the important theoretical construct BPM culture. In addition, the paper raises awareness for realizing these values in a BPM context.

What are the health needs, familial and social problems of Thai migrants in a local community in Australia? A focus group study

This study explored the health needs, familial and social problems of Thai migrants in a local community in Brisbane, Australia. Five focus groups with Thai migrants were conducted. The qualitative data were examined using thematic content analysis that is specifically designed for focus group analysis. Four themes were identified: (1) positive experiences in Australia, (2) physical health problems, (3) mental health problems, and (4) familial and social health problems. This study revealed key health needs related to chronic disease and mental health, major barriers to health service use, such as language skills, and facilitating factors, such as the Thai Temple. We concluded that because the health needs, familial and social problems of Thai migrants were complex and culture bound, the development of health and community services for Thai migrants needs to take account of the ways in which Thai culture both negatively impacts health and offer positive solutions to problems.

Sleeping Beauty : global advertising self regulation awakens

The system of self regulation of advertising in mass-media was a dream scenario. If stakeholders complained and the advertisement was deemed offensive by an expert panel, it was an easy matter to withdraw the advertisement from mass media and from public attention. This was done locally, according to the cultural values and aesthetics of the population and the mandate of the self regulation board. To advertising regulators, the internet became their worst nightmare. The system of self regulation was no longer closed, and could be circumvented by placing the offending advertisements online. The system of self regulation was also no longer local, but global. All internet users had access to the same advertisements, regardless of cultural considerations. The awakening of global advertising self regulation is something that demands discussion. It is of value to all conference goers of AAA 2010 Europe, as it affects all advertising academics and all stakeholders in the advertising process. As the leading advertising body seeking to bring global advertising issues to a new venue in Europe, the AAA 2010 European Conference seems ripe for a special session on advertising self regulation. This is especially true as the panel contributes a European, US and Asia-Pacific viewpoint.

Education : South Asia

South Asia, a source of great literary and literacy traditions and a generator of great philosophies, also contains a large percentage of illiterate people, the majority of them women. South Asia includes India, Pakistan, Bhutan, Nepal, Sri Lanka, Bangladesh, Burma and Afghanistan. The progress of these countries is dependent on female literacy because health, hygiene, and nutrition problems can be partly overcome through educating women. “Illiteracy is closely related to underdevelopment and poverty, and the elimination of illiteracy represents an essential condition for the development and well-being of peoples and nations" (UNESCO PROAP, 1989: II ). In South Asia, women constitute nearly two- thirds of illiterate adults. There is an inherent contradiction in the region between modern amenities, modern educational systems, and advanced communication systems, on the one hand, and the high level of illiteracy and significant backwardness, on the other.

Linkages of development and environment : in search of an integrated approach through sustainable development

Least developed countries (LDCs) are the primary victims of environmental changes, including present and future impacts of climate change. Environmental degradation poses a serious threat to the conservation and sustainable use of natural resources, thus hindering development in LDCs. Simultaneously, poverty is itself both a major cause and effect of global environmental problems. Against this backdrop, this essay argues that without recognition and protection of a collective right to development, genuine environmental protection will remain unachievable. Further, this essay submits that, particularly in the context of LDCs, the right to environment and the right to development are inseparable. Finally, this essay argues that the relationship between the right to environment and the right to development must fall within the paradigm of sustainable development if the promotion and protection of those rights are to be justified.

IMO mandatory energy efficiency measures for international shipping : the first mandatory global greenhouse gas reduction instrument for an international industry

Bunker fuels used in the aviation and maritime sectors are responsible for nearly 10% of global greenhouse gas emissions.1 According to a scientific survey: ‘[s]hipping is estimated to have emitted 1,046 million tonnes of CO2 in 2007, which corresponds to 3.3% of the global emissions during 2007. International shipping is estimated to have emitted 870 million tonnes, or about 2.7% of the global emissions of CO2 in 2007’. The study also predicted that ‘by 2050, in the absence of policies, ship emissions may grow by 150% to 250% (compared to the emissions in 2007) as a result of the growth in shipping.’

Mathematical modelling of controlled drug release from polymer micro-spheres : incorporating the effects of swelling, diffusion and dissolution via moving boundary problems

Controlled drug delivery is a key topic in modern pharmacotherapy, where controlled drug delivery devices are required to prolong the period of release, maintain a constant release rate, or release the drug with a predetermined release profile. In the pharmaceutical industry, the development process of a controlled drug delivery device may be facilitated enormously by the mathematical modelling of drug release mechanisms, directly decreasing the number of necessary experiments. Such mathematical modelling is difficult because several mechanisms are involved during the drug release process. The main drug release mechanisms of a controlled release device are based on the device’s physiochemical properties, and include diffusion, swelling and erosion. In this thesis, four controlled drug delivery models are investigated. These four models selectively involve the solvent penetration into the polymeric device, the swelling of the polymer, the polymer erosion and the drug diffusion out of the device but all share two common key features. The first is that the solvent penetration into the polymer causes the transition of the polymer from a glassy state into a rubbery state. The interface between the two states of the polymer is modelled as a moving boundary and the speed of this interface is governed by a kinetic law. The second feature is that drug diffusion only happens in the rubbery region of the polymer, with a nonlinear diffusion coefficient which is dependent on the concentration of solvent. These models are analysed by using both formal asymptotics and numerical computation, where front-fixing methods and the method of lines with finite difference approximations are used to solve these models numerically. This numerical scheme is conservative, accurate and easily implemented to the moving boundary problems and is thoroughly explained in Section 3.2. From the small time asymptotic analysis in Sections 5.3.1, 6.3.1 and 7.2.1, these models exhibit the non-Fickian behaviour referred to as Case II diffusion, and an initial constant rate of drug release which is appealing to the pharmaceutical industry because this indicates zeroorder release. The numerical results of the models qualitatively confirms the experimental behaviour identified in the literature. The knowledge obtained from investigating these models can help to develop more complex multi-layered drug delivery devices in order to achieve sophisticated drug release profiles. A multi-layer matrix tablet, which consists of a number of polymer layers designed to provide sustainable and constant drug release or bimodal drug release, is also discussed in this research. The moving boundary problem describing the solvent penetration into the polymer also arises in melting and freezing problems which have been modelled as the classical onephase Stefan problem. The classical one-phase Stefan problem has unrealistic singularities existed in the problem at the complete melting time. Hence we investigate the effect of including the kinetic undercooling to the melting problem and this problem is called the one-phase Stefan problem with kinetic undercooling. Interestingly we discover the unrealistic singularities existed in the classical one-phase Stefan problem at the complete melting time are regularised and also find out the small time behaviour of the one-phase Stefan problem with kinetic undercooling is different to the classical one-phase Stefan problem from the small time asymptotic analysis in Section 3.3. In the case of melting very small particles, it is known that surface tension effects are important. The effect of including the surface tension to the melting problem for nanoparticles (no kinetic undercooling) has been investigated in the past, however the one-phase Stefan problem with surface tension exhibits finite-time blow-up. Therefore we investigate the effect of including both the surface tension and kinetic undercooling to the melting problem for nanoparticles and find out the the solution continues to exist until complete melting. The investigation of including kinetic undercooling and surface tension to the melting problems reveals more insight into the regularisations of unphysical singularities in the classical one-phase Stefan problem. This investigation gives a better understanding of melting a particle, and contributes to the current body of knowledge related to melting and freezing due to heat conduction.

The global creative economy and the new development debate

This paper explores the renewed interest in the creative economy as a possible development pathway for developing nations. Noting the extent to which discussions of creative industries frequently merge into the concept of a creative economy, the paper considers the institutional and public policy settings required to capture economic value associated with creative practice. It is also argued that knowledge economy and creative economy discourses are increasingly merging, particularly in their focus upon design, innovation, software development and convergent media. The paper draws attention to ambiguities in policy discourse, particularly in relation to copyright and intellectual property.

Sensors for missions

An onboard payload may be seen in most instances as the “Raison d’Etre” for a UAV. It will define its capabilities, usability and hence market value. Large and medium UAV payloads exhibit significant differences in size and computing capability when compared with small UAVs. The latter have stringent size, weight, and power requirements, typically referred as SWaP, while the former still exhibit endless appetite for compute capability. The tendency for this type of UAVs (Global Hawk, Hunter, Fire Scout, etc.) is to increase payload density and hence processing capability. An example of this approach is the Northrop Grumman MQ-8 Fire Scout helicopter, which has a modular payload architecture that incorporates off-the-shelf components. Regardless of the UAV size and capabilities, advances in miniaturization of electronics are enabling the replacement of multiprocessing, power-hungry general-purpose processors for more integrated and compact electronics (e.g., FPGAs). Payloads play a significant role in the quality of ISR (intelligent, surveillance, and reconnaissance) data, and also in how quick that information can be delivered to the end user. At a high level, payloads are important enablers of greater mission autonomy, which is the ultimate aim in every UAV. This section describes common payload sensors and introduces two examples cases in which onboard payloads were used to solve real-world problems. A collision avoidance payload based on electro optical (EO) sensors is first introduced, followed by a remote sensing application for power line inspection and vegetation management.

A systematic review on quality of life among patients at 1 year after treatment for head and neck cancer

Introduction: Although advances in treatment modalities have improved the survival of head and neck (H&N) cancer patients over recent years, survivors’ quality of life (QoL) could be impaired for a number of reasons. The investigation of QoL determinants can inform the design of supportive interventions for this population. Objectives: To examine the QoL of H&N cancer survivors at 1 year after treatment and to identify potential determinants affecting their QoL. Methods: A systematic search of literature was done in December 2011 in five databases: Pubmed, Medline, Scopus, Sciencedirect and CINAHL, using combined search terms ‘head and neck cancer’, ‘quality of life’, ‘health-related quality of life’ and ‘systematic review’. The methodological qualities of selected studies were assessed by two reviewers using predefined criteria. The study characteristics and results were abstracted and summarized. Results: Thirty-seven studies met all inclusion criteria with methodological quality from moderate to high. The global QoL of H&N cancer survivors returned to baseline at 1 year after treatment. Significant improvement showed in emotional functioning while physical functioning, xerostomia, sticky/insufficient saliva, and fatigue were consistently worse at 12 months compared with baseline. Age, cancer sites and stages, social support, smoking, presence of feeding tube are significant QoL determinants at 12 months. Conclusions: Although the global QoL of H&N cancer survivors recover by 12 months after treatment, problems with physical functioning, fatigue, xerostomia and sticky saliva persist. Regular assessment should be carried out to monitor these problems. Further research is required to develop appropriate and effective interventions for this population.

Communication and the casualisation of nursing : a critical ethnography

The contemporary working environment is being rapidly reshaped by technological, industrial and political forces. Increased global competitiveness and an emphasis on productivity have led to the appearance of alternative methods of employment, such as part-time, casual and itinerant work, allowing greater flexibility. This allows for the development of a core permanent staff and the simultaneous utilisation of casual staff according to business needs. Flexible workers across industries are generally referred to as the non-standard workforce and full-time permanent workers as the standard workforce. Even though labour flexibility favours the employer, increased opportunity for flexible work has been embraced by women for many reasons, including the gender struggle for greater economic independence and social equality. Consequently, the largely female nursing industry, both nationally and internationally, has been caught up in this wave of change. This ageing workforce has been at the forefront of the push for flexibility with recent figures showing almost half the nursing workforce is employed in non-standard capacity. In part, this has allowed women to fulfil caring roles outside their work, to ease off nearing retirement and to supplement the family income. More significantly, however, flexibility has developed as an economic management initiative, as a strategy for cost constraint. The result has been the development of a dual workforce and as suggested by Pocock, Buchanan and Campbell (2004), associated deep-seated resentment and the marginalisation of part-time and casual workers by their full-time colleagues and managers. Additionally, as nursing currently faces serious recruitment and retention problems there is urgent need to understand the factors which are underlying present discontent in the nursing profession. There is an identified gap in nursing knowledge surrounding the issues relating to recruitment and retention. Communication involves speaking, listening, reading and writing and is an interactive process which is central to the lives of humans. Workplace communication refers to human interaction, information technology, and multimedia and print. It is the means to relationship building between workers, management, and their external environment and is critical to organisational effectiveness. Communication and language are integral to nursing performance (Hall, 2005), in twenty-four hour service however increasing fragmentation due to part-time and casual work in the nursing industry means that effective communication management has become increasingly difficult. More broadly it is known that disruption to communication systems impacts negatively on consumer outcomes. Because of this gap in understanding how nurses view their contemporary nursing world, an interpretative ethnographic study which progressed to a critical ethnographic study, based on the conceptual framework of constructionism and interpretativism was used. The study site was a division within an acute health care facility, and the relationship between increasing casualisation of the nursing workforce and the experiences of communication of standard and non-standard nurses was explored. For this study, full-time standard nurses were those employed to work in a specific unit for forty hours per week. Non-standard nurses were those employed part-time in specific units or those nurses employed to work as relief pool nurses for shift short falls where needed. Nurses employed by external agencies, but required to fill in for shifts at the facility were excluded from this research. This study involved an analysis of observational, interview and focus group data of standard and non-standard nurses within this facility. Three analytical findings - the organisation of nursing work; constructing the casual nurse as other; and the function of space, situate communication within a broader discussion about non-standard work and organisational culture. The study results suggest that a significant culture of marginalisation exists for nurses who work in a non-standard capacity and that this affects communication for nurses and has implications for the quality of patient care. The discussion draws on the seven elements of marginalisation described by Hall, Stephen and Melius (1994). The arguments propose that these elements underpin a culture which supports remnants of the historically gendered stereotype "the good nurse" and these cultural values contribute to practices and behaviour which marginalise all nurses, particularly those who work less than full-time. Gender inequality is argued to be at the heart of marginalising practices because of long standing subordination of nurses by the powerful medical profession, paralleling historical subordination of women in society. This has denied nurses adequate representation and voice in decision making. The new knowledge emanating from this study extends current knowledge of factors surrounding recruitment and retention and as such contributes to an understanding of the current and complex nursing environment.

Sustainable knowledge community precincts : lessons from global best practices

In the era of global knowledge economy, urban regions—seeking to increase their competitive edge, become destinations for talent and investment, and provide prosperity and quality of life to their inhabitants—have little chance achieving their development goals without forming effective knowledge-based urban development (KBUD) strategies. KBUD paradigm suggests that the economic future of cities increasingly depends on the capacity to attract, generate, retain and foster creativity, knowledge and innovation—and make space and place for knowledge generation and knowledge communities. Thus, the paper aims to shed light on the planning and development processes of the KBUD phenomenon with respect to the construction of sustainable knowledge community precincts (KCPs) aimed at making space for knowledge generation and place for knowledge communities—and provide useful lessons for the developing country cities seeking such sustainable and KBUD.