“Digital Diagnostics and Communication (DDC) system” Redesigning the Emergency Ambulance

During the development of a new treatment space for the UK emergency ambulance participatory observations with front-line clinicians revealed the need for an integrated patient monitoring, communication and navigation system. The research identified the different information touch-points and requirements through modes of use analysis, day-in-the-life study and simulation workshops with clinicians. Emergency scenario and role-play with paramedics identified 5 distinct ambulance modes of use. Information flow diagrams were created and checked by paramedics and digital User Interface (UI) wireframes were developed and evaluated by clinicians during clinical evaluations. Feedback from clinicians defined UI design specification further leading to a final design proposal. This research was a further development from the 2007 EPSRC funded “Smart Pods” project. The resulting interactive prototype was co-designed in collaboration with ambulance crews and provides a vision of what could be achieved by integrating well-proven IT technologies and protocols into a package relevant in the emergency medicine field. The system has been reviewed by over 40 ambulance crews and is part of a newly co-designed ambulance treatment space.

Evaluation of Tottenham Thinking Space Pilot: Final Report. Research Report 11.

This reports summarises research that began in March 2014 and was completed in October 2015 by an experienced inter-disciplinary research team from the Centre for Social Justice and Change and Psycho-Social Research Group, School of Social Sciences, the University of East London (UEL) and included Dr Yang Li from the Centre for Geo-Information Studies, UEL, for the first phase of the study. Tottenham ‘Thinking Space’ (TTS) was a pilot therapeutic initiative based in local communities and delivered by the Tavistock & Portman NHS Foundation Trust and funded by the London Borough of Haringey Directorate of Public Health. TTS aimed to improve mental health and enable and empower local communities. TTS was situated within a mental health agenda that was integral to Haringey’s Health and Wellbeing Strategy 2012-2015 and aimed to encourage people to help themselves and each other and develop confident communities. On the one hand TTS was well-suited to this agenda, but, on the other, participants were resistant to, and were trying to free themselves from labelling that implied ‘mental health difficulties’. A total of 243 meetings were held and 351 people attended 1,716 times. The majority of participants attended four times or less, and 33 people attended between 5 and 10 times and 39 people attended over 10 times. Attending a small number of times does not necessarily mean that the attendee was not helped. Attendees reflected the ethnic diversity of Tottenham; 29 different ethnic groups attended. The opportunity to meet with people from different cultural backgrounds in a safe space was highly valued by attendees. Similarly, participants valued the wide age range represented and felt that they benefited from listening to inter-generational experiences. The majority of participants were women (72%) and they were instrumental in initiating further Thinking Spaces, topic specific meetings, the summer programme of activities for mothers and young children and training to meet their needs. The community development worker had a key role in implementing the initiative and sustaining its growth throughout the pilot period. We observed that TTS attracted those whose life experiences were marked by personal struggle and trauma. Many participants felt safe enough to disclose mental health difficulties (85% of those who completed a questionnaire). Participants also came seeking a stronger sense of community in their local area. Key features of the meetings are that they are democratic, non-judgemental, respectful, and focussed on encouraging everyone to listen and to try to understand. We found that the therapeutic method was put in place by high quality facilitators and health and personal outcomes for participants were consistent with those predicted by the underpinning psychoanalytical and systemic theories. Outcomes included a reduction in anxieties and improved personal and social functioning; approximately two thirds of those who completed a questionnaire felt better understood, felt more motivated and more hopeful for the future. The overwhelming majority of survey respondents also felt good about contributing to their community, said that they were more able to cooperate with others and accepting of other cultures, and had made new friends. Participants typically had a better understanding of their current situation and how to take positive action; of those who completed a questionnaire, over half felt more confident to seek support for a personal issue and to contact services. Members of TTS supported each other and instilled hope and build community-mindedness that reduced social isolation.

Spatially integrated erbium-doped fiber amplifiers enabling space-division multiplexing

L’augmentation exponentielle de la demande de bande passante pour les communications laisse présager une saturation prochaine de la capacité des réseaux de télécommunications qui devrait se matérialiser au cours de la prochaine décennie. En effet, la théorie de l’information prédit que les effets non linéaires dans les fibres monomodes limite la capacité de transmission de celles-ci et peu de gain à ce niveau peut être espéré des techniques traditionnelles de multiplexage développées et utilisées jusqu’à présent dans les systèmes à haut débit. La dimension spatiale du canal optique est proposée comme un nouveau degré de liberté qui peut être utilisé pour augmenter le nombre de canaux de transmission et, par conséquent, résoudre cette menace de «crise de capacité». Ainsi, inspirée par les techniques micro-ondes, la technique émergente appelée multiplexage spatial (SDM) est une technologie prometteuse pour la création de réseaux optiques de prochaine génération. Pour réaliser le SDM dans les liens de fibres optiques, il faut réexaminer tous les dispositifs intégrés, les équipements et les sous-systèmes. Parmi ces éléments, l’amplificateur optique SDM est critique, en particulier pour les systèmes de transmission pour les longues distances. En raison des excellentes caractéristiques de l’amplificateur à fibre dopée à l’erbium (EDFA) utilisé dans les systèmes actuels de pointe, l’EDFA est à nouveau un candidat de choix pour la mise en œuvre des amplificateurs SDM pratiques. Toutefois, étant donné que le SDM introduit une variation spatiale du champ dans le plan transversal de la fibre, les amplificateurs à fibre dopée à l’erbium spatialement intégrés (SIEDFA) nécessitent une conception soignée. Dans cette thèse, nous examinons tout d’abord les progrès récents du SDM, en particulier les amplificateurs optiques SDM. Ensuite, nous identifions et discutons les principaux enjeux des SIEDFA qui exigent un examen scientifique. Suite à cela, la théorie des EDFA est brièvement présentée et une modélisation numérique pouvant être utilisée pour simuler les SIEDFA est proposée. Sur la base d’un outil de simulation fait maison, nous proposons une nouvelle conception des profils de dopage annulaire des fibres à quelques-modes dopées à l’erbium (ED-FMF) et nous évaluons numériquement la performance d’un amplificateur à un étage, avec fibre à dopage annulaire, à ainsi qu’un amplificateur à double étage pour les communications sur des fibres ne comportant que quelques modes. Par la suite, nous concevons des fibres dopées à l’erbium avec une gaine annulaire et multi-cœurs (ED-MCF). Nous avons évalué numériquement le recouvrement de la pompe avec les multiples cœurs de ces amplificateurs. En plus de la conception, nous fabriquons et caractérisons une fibre multi-cœurs à quelques modes dopées à l’erbium. Nous réalisons la première démonstration des amplificateurs à fibre optique spatialement intégrés incorporant de telles fibres dopées. Enfin, nous présentons les conclusions ainsi que les perspectives de cette recherche. La recherche et le développement des SIEDFA offriront d’énormes avantages non seulement pour les systèmes de transmission future SDM, mais aussi pour les systèmes de transmission monomode sur des fibres standards à un cœur car ils permettent de remplacer plusieurs amplificateurs par un amplificateur intégré.

INVISIBLE LABOR FOR DATA: INSTITUTIONS, INFRASTRUCTURE, AND VIRTUAL SPACE

Americans are accustomed to a wide range of data collection in their lives: census, polls, surveys, user registrations, and disclosure forms. When logging onto the Internet, users’ actions are being tracked everywhere: clicking, typing, tapping, swiping, searching, and placing orders. All of this data is stored to create data-driven profiles of each user. Social network sites, furthermore, set the voluntarily sharing of personal data as the default mode of engagement. But people’s time and energy devoted to creating this massive amount of data, on paper and online, are taken for granted. Few people would consider their time and energy spent on data production as labor. Even if some people do acknowledge their labor for data, they believe it is accessory to the activities at hand. In the face of pervasive data collection and the rising time spent on screens, why do people keep ignoring their labor for data? How has labor for data been become invisible, as something that is disregarded by many users? What does invisible labor for data imply for everyday cultural practices in the United States? Invisible Labor for Data addresses these questions. I argue that three intertwined forces contribute to framing data production as being void of labor: data production institutions throughout history, the Internet’s technological infrastructure (especially with the implementation of algorithms), and the multiplication of virtual spaces. There is a common tendency in the framework of human interactions with computers to deprive data and bodies of their materiality. My Introduction and Chapter 1 offer theoretical interventions by reinstating embodied materiality and redefining labor for data as an ongoing process. The middle Chapters present case studies explaining how labor for data is pushed to the margin of the narratives about data production. I focus on a nationwide debate in the 1960s on whether the U.S. should build a databank, contemporary Big Data practices in the data broker and the Internet industries, and the group of people who are hired to produce data for other people’s avatars in the virtual games. I conclude with a discussion on how the new development of crowdsourcing projects may usher in the new chapter in exploiting invisible and discounted labor for data.

Topics in equilibrium and nonequilibrium thermodynamics: computing crystalline free energies and engineering Maxwell’s demon.

This dissertation covers two separate topics in statistical physics. The first part of the dissertation focuses on computational methods of obtaining the free energies (or partition functions) of crystalline solids. We describe a method to compute the Helmholtz free energy of a crystalline solid by direct evaluation of the partition function. In the many-dimensional conformation space of all possible arrangements of N particles inside a periodic box, the energy landscape consists of localized islands corresponding to different solid phases. Calculating the partition function for a specific phase involves integrating over the corresponding island. Introducing a natural order parameter that quantifies the net displacement of particles from lattices sites, we write the partition function in terms of a one-dimensional integral along the order parameter, and evaluate this integral using umbrella sampling. We validate the method by computing free energies of both face-centered cubic (FCC) and hexagonal close-packed (HCP) hard sphere crystals with a precision of $10^{-5}k_BT$ per particle. In developing the numerical method, we find several scaling properties of crystalline solids in the thermodynamic limit. Using these scaling properties, we derive an explicit asymptotic formula for the free energy per particle in the thermodynamic limit. In addition, we describe several changes of coordinates that can be used to separate internal degrees of freedom from external, translational degrees of freedom. The second part of the dissertation focuses on engineering idealized physical devices that work as Maxwell's demon. We describe two autonomous mechanical devices that extract energy from a single heat bath and convert it into work, while writing information onto memory registers. Additionally, both devices can operate as Landauer's eraser, namely they can erase information from a memory register, while energy is dissipated into the heat bath. The phase diagrams and the efficiencies of the two models are solved and analyzed. These two models provide concrete physical illustrations of the thermodynamic consequences of information processing.

Ferramentas Web, Web 2.0 e software livre em EVT: estudo sobre a integração de ferramentas digitais no currículo da disciplina de educação visual e tecnológica

A utilização das TIC ocupam um lugar cada vez mais importante nas nossas escolas, marcado sobretudo pela evolução das tecnologias e pela utilização em contexto educativo de muitas ferramentas da Web 2.0. Esse facto é muito notório na disciplina de Educação Visual e Tecnológica, de carácter eminentemente prático, onde é permitido explorar várias ferramentas digitais para abordagem de conteúdos da disciplina e para a criação de produtos gráficos e plásticos. Com o aparecimento da Web 2.0 e a disponibilização de milhares de novas ferramentas digitais aos utilizadores da Internet, estimula-se um interesse cada vez maior na adoção de metodologias e estratégias com recurso a estes media e que suportem uma aprendizagem mais eficaz e motivadora para os alunos, articulando-se os suportes tradicionais de EVT com os novos media digitais. Neste contexto, o presente estudo é o resultado duma investigação-ação realizada no âmbito do Programa Doutoral em Multimédia em Educação da Universidade de Aveiro onde se implementou a integração de ferramentas da Web, Web 2.0 e Software Livre em contexto educativo na disciplina de EVT, na qual poderiam ser utilizadas tanto as técnicas tradicionais de realização mais usuais na disciplina como a integração e articulação com as ferramentas digitais, suportadas por software livre (e outros de utilização gratuita), a Web e a Web 2.0 para suporte ao ensino e aprendizagem dos diversos conteúdos e áreas de exploração da disciplina. Este estudo, desenhado em três ciclos, envolveu num primeiro momento a constituição de uma comunidade de prática de professores alargada, sendo criadas seis turmas de formação que reuniram um total de 112 professores que pretendiam integrar as ferramentas digitais em EVT. Para além da pesquisa, análise, seleção e catalogação destas 430 ferramentas digitais recenseadas, produziram-se 371 manuais de apoio à utilização das mesmas, sendo estes recursos disponibilizados no espaço do EVTdigital. Num segundo ciclo, decorrente da avaliação realizada, foi criada a distribuição EVTux para simplificar o acesso e utilização das ferramentas digitais em contexto de EVT. Finalmente, o terceiro ciclo, decorre da eliminação da disciplina de EVT do currículo do 2º ciclo do ensino básico e a sua substituição por duas novas disciplinas, tendo-se realizada a respetiva análise de conteúdo das metas curriculares e produzido a aplicação As ferramentas digitais do Mundo Visual, concebida para contextualizar e indexar as ferramentas digitais selecionadas para a nova disciplina de Educação Visual.Os resultados deste estudo apontam claramente para a possibilidade de integrar na disciplina de Educação Visual e Tecnológica (ou no presente momento, em Educação Visual) ferramentas digitais para abordagem aos conteúdos e áreas de exploração, bem como a possibilidade de se constituírem facilmente comunidades de prática (como foi o caso) que possam colaborar na catalogação destas ferramentas no contexto específico da disciplina e para a necessidade sentida pelos professores em obter informação e formação que os possa atualizar quanto à integração das TIC no currículo. Apresentam-se, ainda, as limitações deste estudo que passaram sobretudo pelo impacto negativo que a eliminação da disciplina provocou na motivação dos docentes e a sua consequente participação no decorrer de algumas fases do trabalho, e ainda da dificuldade de gestão de uma equipa de professores colaboradores tão numerosa e diversificada. Nesse sentido, são também apresentadas sugestões para estudos futuros.

A high-flux BEC source for mobile atom interferometers

Quantum sensors based on coherent matter-waves are precise measurement devices whose ultimate accuracy is achieved with Bose-Einstein condensates (BECs) in extended free fall. This is ideally realized in microgravity environments such as drop towers, ballistic rockets and space platforms. However, the transition from lab-based BEC machines to robust and mobile sources with comparable performance is a challenging endeavor. Here we report on the realization of a miniaturized setup, generating a flux of 4x10(5) quantum degenerate Rb-87 atoms every 1.6 s. Ensembles of 1 x 10(5) atoms can be produced at a 1 Hz rate. This is achieved by loading a cold atomic beam directly into a multi-layer atom chip that is designed for efficient transfer from laser-cooled to magnetically trapped clouds. The attained flux of degenerate atoms is on par with current lab-based BEC experiments while offering significantly higher repetition rates. Additionally, the flux is approaching those of current interferometers employing Raman-type velocity selection of laser-cooled atoms. The compact and robust design allows for mobile operation in a variety of demanding environments and paves the way for transportable high-precision quantum sensors.

Towards a gravitational wave observatory designer: sensitivity limits of spaceborne detectors

The most promising concept for low frequency (millihertz to hertz) gravitational wave observatories are laser interferometric detectors in space. It is usually assumed that the noise floor for such a detector is dominated by optical shot noise in the signal readout. For this to be true, a careful balance of mission parameters is crucial to keep all other parasitic disturbances below shot noise. We developed a web application that uses over 30 input parameters and considers many important technical noise sources and noise suppression techniques to derive a realistic position noise budget. It optimizes free parameters automatically and generates a detailed report on all individual noise contributions. Thus one can easily explore the entire parameter space and design a realistic gravitational wave observatory. In this document we describe the different parameters, present all underlying calculations, and compare the final observatory's sensitivity with astrophysical sources of gravitational waves. We use as an example parameters currently assumed to be likely applied to a space mission proposed to be launched in 2034 by the European Space Agency. The web application itself is publicly available on the Internet at http://spacegravity.org/designer. Future versions of the web application will incorporate the frequency dependence of different noise sources and include a more detailed model of the observatory's residual acceleration noise.

Spectral self-action of THz emission from ionizing two-color laser pulses in gases

The spectrum of terahertz (THz) emission in gases via ionizing two-color femtosecond pulses is analyzed by means of a semi-analytic model and numerical simulations in 1D, 2D and 3D geometries taking into account propagation effects of both pump and THz fields. We show that produced THz signals interact with free electron trajectories and thus significantly influence further THz generation upon propagation, i.e., make the process inherently nonlocal. This self-action contributes to the observed strong spectral broadening of the generated THz field. Weshow that diffraction of the generated THz radiation is the limiting factor for the co-propagating low frequency amplitudes and thus for the self-action mechanism in 2D and 3D geometries.

A representation-free description of the Kasevich-Chu interferometer: a resolution of the redshift controversy

Motivated by a recent claim by Muller et al (2010 Nature 463 926-9) that an atom interferometer can serve as an atom clock to measure the gravitational redshift with an unprecedented accuracy, we provide a representation-free description of the Kasevich-Chu interferometer based on operator algebra. We use this framework to show that the operator product determining the number of atoms at the exit ports of the interferometer is a c-number phase factor whose phase is the sum of only two phases: one is due to the acceleration of the phases of the laser pulses and the other one is due to the acceleration of the atom. This formulation brings out most clearly that this interferometer is an accelerometer or a gravimeter. Moreover, we point out that in different representations of quantum mechanics such as the position or the momentum representation the phase shift appears as though it originates from different physical phenomena. Due to this representation dependence conclusions concerning an enhanced accuracy derived in a specific representation are unfounded.

Free-flight experiments in LISA Pathfinder

The LISA Path finder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Path finder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is contained within the same spacecraft, it is necessary to apply forces on it to maintain its position and attitude relative to the spacecraft. These forces are a potential source of acceleration noise in the LISA Path finder system that are not present in the full LISA con figuration. While LISA Path finder has been designed to meet it's primary mission requirements in the presence of this noise, recent estimates suggest that the on-orbit performance may be limited by this 'suspension noise'. The drift-mode or free-flight experiments provide an opportunity to mitigate this noise source and further characterize the underlying disturbances that are of interest to the designers of LISA-like instruments. This article provides a high-level overview of these experiments and the methods under development to analyze the resulting data.

Transportable setup for amplifier phase fidelity measurements

One possible laser source for the Laser Interferometer Space Antenna (LISA) consists of an Ytterbium-doped fiber amplifier originally developed for inter-satellite communication, seeded by the laser used for the technology demonstrator mission LISA Pathfinder. LISA needs to transmit clock information between its three spacecraft to correct for phase noise between the clocks on the individual spacecraft. For this purpose phase modulation sidebands at GHz frequencies will be imprinted on the laser beams between spacecraft. Differential phase noise between the carrier and a sideband introduced within the optical chain must be very low. We report on a transportable setup to measure the phase fidelity of optical amplifiers.

Interaction-free measurements by quantum Zeno stabilization of ultracold atoms

Quantum mechanics predicts that our physical reality is influenced by events that can potentially happen but factually do not occur. Interaction-free measurements (IFMs) exploit this counterintuitive influence to detect the presence of an object without requiring any interaction with it. Here we propose and realize an IFM concept based on an unstable many-particle system. In our experiments, we employ an ultracold gas in an unstable spin configuration, which can undergo a rapid decay. The object-realized by a laser beam-prevents this decay because of the indirect quantum Zeno effect and thus, its presence can be detected without interacting with a single atom. Contrary to existing proposals, our IFM does not require single-particle sources and is only weakly affected by losses and decoherence. We demonstrate confidence levels of 90%, well beyond previous optical experiments.

Gestural communication of music structure during solo classical piano performance

The production and perception of music is a multimodal activity involving auditory, visual and conceptual processing, integrating these with prior knowledge and environmental experience. Musicians utilise expressive physical nuances to highlight salient features of the score. The question arises within the literature as to whether performers’ non-technical, non-sound-producing movements may be communicatively meaningful and convey important structural information to audience members and co-performers. In the light of previous performance research (Vines et al., 2006, Wanderley, 2002, Davidson, 1993), and considering findings within co-speech gestural research and auditory and audio-visual neuroscience, this thesis examines the nature of those movements not directly necessary for the production of sound, and their particular influence on audience perception. Within the current research 3D performance analysis is conducted using the Vicon 12- camera system and Nexus data-processing software. Performance gestures are identified as repeated patterns of motion relating to music structure, which not only express phrasing and structural hierarchy but are consistently and accurately interpreted as such by a perceiving audience. Gestural characteristics are analysed across performers and performance style using two Chopin preludes selected for their diverse yet comparable structures (Opus 28:7 and 6). Effects on perceptual judgements of presentation modes (visual-only, auditory-only, audiovisual, full- and point-light) and viewing conditions are explored. This thesis argues that while performance style is highly idiosyncratic, piano performers reliably generate structural gestures through repeated patterns of upper-body movement. The shapes and locations of phrasing motions are identified particular to the sample of performers investigated. Findings demonstrate that despite the personalised nature of the gestures, performers use increased velocity of movements to emphasise musical structure and that observers accurately and consistently locate phrasing junctures where these patterns and variation in motion magnitude, shape and velocity occur. By viewing performance motions in polar (spherical) rather than cartesian coordinate space it is possible to get mathematically closer to the movement generated by each of the nine performers, revealing distinct patterns of motion relating to phrasing structures, regardless of intended performance style. These patterns are highly individualised both to each performer and performed piece. Instantaneous velocity analysis indicates a right-directed bias of performance motion variation at salient structural features within individual performances. Perceptual analyses demonstrate that audience members are able to accurately and effectively detect phrasing structure from performance motion alone. This ability persists even for degraded point-light performances, where all extraneous environmental information has been removed. The relative contributions of audio, visual and audiovisual judgements demonstrate that the visual component of a performance does positively impact on the over- all accuracy of phrasing judgements, indicating that receivers are most effective in their recognition of structural segmentations when they can both see and hear a performance. Observers appear to make use of a rapid online judgement heuristics, adjusting response processes quickly to adapt and perform accurately across multiple modes of presentation and performance style. In line with existent theories within the literature, it is proposed that this processing ability may be related to cognitive and perceptual interpretation of syntax within gestural communication during social interaction and speech. Findings of this research may have future impact on performance pedagogy, computational analysis and performance research, as well as potentially influencing future investigations of the cognitive aspects of musical and gestural understanding.

A deformation model of flexible, high area-to-mass ratio debris under perturbations and validation method

A new type of space debris was recently discovered by Schildknecht in near -geosynchronous orbit (GEO). These objects were later identified as exhibiting properties associated with High Area-to-Mass ratio (HAMR) objects. According to their brightness magnitudes (light curve), high rotation rates and composition properties (albedo, amount of specular and diffuse reflection, colour, etc), it is thought that these objects are multilayer insulation (MLI). Observations have shown that this debris type is very sensitive to environmental disturbances, particularly solar radiation pressure, due to the fact that their shapes are easily deformed leading to changes in the Area-to-Mass ratio (AMR) over time. This thesis proposes a simple effective flexible model of the thin, deformable membrane with two different methods. Firstly, this debris is modelled with Finite Element Analysis (FEA) by using Bernoulli-Euler theory called “Bernoulli model”. The Bernoulli model is constructed with beam elements consisting 2 nodes and each node has six degrees of freedom (DoF). The mass of membrane is distributed in beam elements. Secondly, the debris based on multibody dynamics theory call “Multibody model” is modelled as a series of lump masses, connected through flexible joints, representing the flexibility of the membrane itself. The mass of the membrane, albeit low, is taken into account with lump masses in the joints. The dynamic equations for the masses, including the constraints defined by the connecting rigid rod, are derived using fundamental Newtonian mechanics. The physical properties of both flexible models required by the models (membrane density, reflectivity, composition, etc.), are assumed to be those of multilayer insulation. Both flexible membrane models are then propagated together with classical orbital and attitude equations of motion near GEO region to predict the orbital evolution under the perturbations of solar radiation pressure, Earth’s gravity field, luni-solar gravitational fields and self-shadowing effect. These results are then compared to two rigid body models (cannonball and flat rigid plate). In this investigation, when comparing with a rigid model, the evolutions of orbital elements of the flexible models indicate the difference of inclination and secular eccentricity evolutions, rapid irregular attitude motion and unstable cross-section area due to a deformation over time. Then, the Monte Carlo simulations by varying initial attitude dynamics and deformed angle are investigated and compared with rigid models over 100 days. As the results of the simulations, the different initial conditions provide unique orbital motions, which is significantly different in term of orbital motions of both rigid models. Furthermore, this thesis presents a methodology to determine the material dynamic properties of thin membranes and validates the deformation of the multibody model with real MLI materials. Experiments are performed in a high vacuum chamber (10-4 mbar) replicating space environment. A thin membrane is hinged at one end but free at the other. The free motion experiment, the first experiment, is a free vibration test to determine the damping coefficient and natural frequency of the thin membrane. In this test, the membrane is allowed to fall freely in the chamber with the motion tracked and captured through high velocity video frames. A Kalman filter technique is implemented in the tracking algorithm to reduce noise and increase the tracking accuracy of the oscillating motion. The forced motion experiment, the last test, is performed to determine the deformation characteristics of the object. A high power spotlight (500-2000W) is used to illuminate the MLI and the displacements are measured by means of a high resolution laser sensor. Finite Element Analysis (FEA) and multibody dynamics of the experimental setups are used for the validation of the flexible model by comparing with the experimental results of displacements and natural frequencies.