993 resultados para current sharing
Resumo:
The problem concerning livestock waste handling in the Leningrad region has been subjected to a number of research works. However, the requirements for use of manure and sewage sludge as well as for treatment processes are not certain. So, this problem remains relevant and, therefore, further investigation ought to be made. Currently a large amount of sewage sludge and manure is generated in the Leningrad region. These livestock wastes have to be obligatory treated. The most common methods for treatment in the region, such as anaerobic digestion, composting and aging as well as the most potential methods are described in the thesis. The most potential methods for the Leningrad region are anaerobic digestion, composting and combustion. Each method has strengths and weaknesses, which are also considered in the paper. Aging was not considered as potential treatment method because it does not meet the sanitary and epidemiological requirements. Furthermore, the work gives an overview and comparison of Finnish and Russian legislative and normative acts concerning livestock wastes handling. On the whole the requirements of the Russian Federation concerning sewage sludge and manure are not much different from the Finnish ones.
Resumo:
Electron transport in a self-consistent potential along a ballistic two-terminal conductor has been investigated. We have derived general formulas which describe the nonlinear current-voltage characteristics, differential conductance, and low-frequency current and voltage noise assuming an arbitrary distribution function and correlation properties of injected electrons. The analytical results have been obtained for a wide range of biases: from equilibrium to high values beyond the linear-response regime. The particular case of a three-dimensional Fermi-Dirac injection has been analyzed. We show that the Coulomb correlations are manifested in the negative excess voltage noise, i.e., the voltage fluctuations under high-field transport conditions can be less than in equilibrium.
Resumo:
Drought is the main constraint on wheat yield in Mediterranean conditions. The photosynthesis, chlorophyll fluorescence and plant growth parameters of durum wheat (Triticum turgidum, L. var. durum) were compared at three [CO2] (i.e., depleted 260 ppm, current 400ppm and elevated 700 ppm) in plants subjected to twowater regimes (i.e.,well-wateredWW, and mildwater stress by drought orwater deficit WS), during pre-anthesis, post-anthesis and the end of grain filling. We showed that [CO2] effects on plants are modulated by water availability. Plants at depleted [CO2] showed photosynthetic acclimation (i.e., up-regulation) and reduced plant biomass and Harvest Index, but depleted [CO2] combined with WS has a more negative impact on plants with decreases in C assimilation and biomass. Plants at elevated [CO2] had decreased plant growth and photosynthesis in response to a down-regulation mechanism resulting from a decrease in Rubisco and N content, but plants exposed to a combination of elevated [CO2] and WS were the most negatively affected (e.g., on plant biomass).
Resumo:
In the context of autonomous sensors powered by small-size photovoltaic (PV) panels, this work analyses how the efficiency of DC/DC-converter-based power processing circuits can be improved by an appropriate selection of the inductor current that transfers the energy from the PV panel to a storage unit. Each component of power losses (fixed, conduction and switching losses) involved in the DC/DC converter specifically depends on the average inductor current so that there is an optimal value of this current that causes minimal losses and, hence, maximum efficiency. Such an idea has been tested experimentally using two commercial DC/DC converters whose average inductor current is adjustable. Experimental results show that the efficiency can be improved up to 12% by selecting an optimal value of that current, which is around 300-350 mA for such DC/DC converters.
Resumo:
The main objective of this thesis was to compare the efficiency of counter-current and co-current filter cake washing techniques. Filter cake washing is a common unit operation which is used in the chemical process industry for improving the recovery of the liquid phase or for purifying the solid phase of the filter cake. Counter-current displacement washing is more difficult to arrange and it requires additional process equipment but the advantage of counter-current method is that the consumption of wash water that is required for achieving certain filter cake purity may be considerably decreased when compared to the co-current washing method. This is true especially for materials that are difficult to wash. The literature part of this thesis consists of a review of filter cake washing in general, including the basic principles of co-current and counter-current techniques, and a description of the structure and operation of a horizontal vacuum belt filter, which is the equipment considered in the experimental part of this thesis. Also the most common cake washing models are introduced. The experiments were performed by washing wheat apatite filter cakes in a laboratory scale vacuum filter by using both co-current and counter-current washing methods. The main results of these tests were the washing curves that relate the purity of the filter cake to the amount of wash liquid used. Comparison between the obtained washing curves showed that both washing methods could be efficiently applied for achieving good washing results. The differences between the wash liquid consumptions in the co-current and counter-current washing methods were found to be surprisingly small but this is most probably explained by the relatively good washing characteristics of the apatite cakes. The washing models introduced in the literature part were compared with the results obtained from the experiments and it was found out that the studied cake washing processes could be described
Resumo:
High-speed counter-current chromatography (HSCCC) is a major tool for the fast separation of natural products from plants. It was used for the preparative isolation of the flavonoid monoglucosides present in the aerial parts of the Davilla elliptica St. Hill. (Dilleniaceae). This species is used in Brazilian folk medicine for the treatment of gastric disorders. The optimum solvent system used was composed of a mixture of ethyl acetate-n-propanol-water (140:8:80, v/v/v) and led to a successful separation of quercetin-3-O-alpha-L-rhamnopyranoside and myricetin-3-O-alpha-L-rhamnopyranoside in approximately 3.0 hours with purity higher than 95%. Identification was performed by ¹H NMR, 13C NMR and HPLC-UV-DAD analyses.
Resumo:
This is a study of team social networks, their antecedents and outcomes. In focusing attention on the structural configuration of the team this research contributes to a new wave of thinking concerning group social capital. The research site was a random sample of Finnish work organisations. The data consisted of 499 employees in 76 teams representing 48 different organisations. A systematic literature review and quantitative methods were used in conducting the research: the former primarily to establish the current theoretical position on the relationships among the variables and the latter to test these relationships. Social network analysis was the primary method used in identifying the social-network relations among the work-team members. The first and key contribution of this study is that it relates the structuralnetwork properties of work teams to behavioural outcomes, attitudinal outcomes and, ultimately, team performance. Moreover, it shows that addressing attitudinal outcomes is also important in terms of team performance; attitudinal outcomes (team identity) mediated the relationship between the team’s performance and its social network. The second contribution is that it examines the possible antecedents of the social structure. It is thus one response to Salancik’s (1995) call for a network theory in that it explains why certain network characteristics exist. Itdemonstrates that irrespective of whether or not a team is heterogeneous in terms of age or gender, educational diversity may protect it from centralisation. However, heterogeneity in terms of gender turned out to have a negative impact on density. Thirdly, given the observation that the benefits of (team) networks are typically theorised and modelled without reference to the nature of the relationships comprising the structure, the study directly tested whether team knowledge mediated the effects of instrumental and expressive network relationships on team performance. Furthermore, with its focus on expressive networks that link the workplace to a more informal world, which have been rather neglected in previous research, it enhances knowledge of teams andnetworks. The results indicate that knowledge sharing fully mediates the influence of complementarities between dense and fragmented instrumental network relationships, thus providing empirical validation of the implicit understanding that networks transfer knowledge. Fourthly, the study findings suggest that an optimal configuration of the work-team social-network structure combines both bridging and bonding social relationships.
Resumo:
The objective of this research was to find how the critical factors enabling intraorganizational knowledge sharing could be implemented to be part of case organization’s actions. The theoretical framework of the research was constituted based on previous scientific discussions concerning knowledge and its dimensions, knowledge sharing and its linkage to organizational learning. The intraorganizational knowledge sharing critical factors form an essential part of the theoretical framework. The study was a qualitative case study. The data was collected using focus group interviews and analyzed using theme analysis. In the empirical part of the study case organizations characteristics to the intraorganizational knowledge sharing were researched, intraorganizational knowledge sharing goals were mapped and finally improvement actions were suggested. The most significant suggestions were creating an organization wide knowledge sharing strategy, facilitating the development of social networks and communicating the top management support for knowledge sharing activities.
Resumo:
The focus of this Master’s Thesis is on knowledge sharing in a virtual Learning community. The theoretical part of this study aims at presenting the theory of knowledge sharing, competence development and learning in virtual teams. The features of successful learning organizations as well as enablers of effective knowledge sharing in virtual communities are also introduced to the reader in the theoretical framework. The empirical research for this study was realized in a global ICT company, specifically in its Human Resources business unit. The research consisted of two rounds of online questionnaires, which were conducted among all the members of the virtual Learning community. The research aim was to find shared opinions concerning the features of a successful virtual Learning community. The analysis of the data in this study was conducted using a qualitative research methodology. The empirical research showed that the main important features of a successful virtual Learning community are members’ passion towards the community way of working as well as the relevance of the content in the virtual community. In general, it was found that knowledge sharing and competence development are important matters in dynamic organizations as well as virtual communities as method and tool for sharing knowledge and hence increasing both individual and organizational knowledge. This is proved by theoretical and by empirical research in this study.
Resumo:
With this article we want to present a state of affairs of the didactics of art in our context, and at the same time we want todiscuss on its pluri- and interdisciplinary construction. We check the different disciplines that configure it and we analysethe paradigm of artistic education as a discipline (DBAE) and its passage to post-modernity. This example focuses thediscussion about the opportunity of adapting holistic educative models and the transition of the current educativeinnovation towards skill models
Resumo:
Preparative high-speed counter-current chromatography (HSCCC) was successfully applied for separation and purification of sesquiterpenoids from an extract of Tussilago farfara L. with a two-phase solvent system composed of n-hexane-ethyl acetate- methanol-water (1:0.5:1.1:0.3, v/v/v/v). The separation produced a total of 32 mg of tussilagone, 18 mg of 14-acetoxy-7β-(3'-ethyl cis-crotonoyloxy)-lα-(2'-methyl butyryloxy)-notonipetranone and 21 mg of 7β-(3'-ethyl cis-crotonoyloxy)-lα-(2'- methyl butyryloxy)-3,14-dehydro-Z-notonipetranone from 500 mg of the crude extract in one step separation with the purity of 99.5, 99.4 and 99.1%, respectively, as determined by HPLC. The structures of these compounds were identified by ESI-MS, ¹H-NMR and 13C-NMR.
Resumo:
Supercritical fluid extraction was used to extract active compounds from the Chinese traditional medicinal D. dasycarpus under the pressure of 30 MPa and temperature of 45 ºC. Further separation and purification was established by high-speed counter-current chromatography (HSCCC) with a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (1:0.8:1.3:0.9, volume ratio). The separation yielded a total of 47 mg of dictamnine, 24 mg of obacunone and 83 mg of fraxinellone from 1.0 g of the crude extract in one step separation with the purity of 99.2, 98.4 and 99.0%, respectively, as determined by HPLC. The chemical structures of these compounds were identified by ESI-MS, IR, ¹H-NMR and 13C-NMR.
Resumo:
Eight bufadienolides were successfully isolated and purified from ChanSu by high-speed counter-current chromatography (HSCCC) combined with preparative HPLC (prep-HPLC). First, a stepwise elution mode of HSCCC with the solvent system composed of petroleum ether - ethyl acetate - methanol - water (4:6:4:6, 4:6:5:5, v/v) was employed and four bufadienolides, two partially purified fractions were obtained from 200 mg of crude extract. The partially purified fractions III and VI were then further separated by prep-HPLC, respectively, and another four bufadienolides were recovered. Their structures were confirmed by ESI-MS and ¹H-NMR spectra.