Effect of firefighter boots and viscoelastic insoles on the impact force of the ground reaction force’s vertical component

The aims of the present study were to determine the effect of firefighter's boots on the vertical component of the ground reaction force (GRF) at heel strike, also known as heel strike transient and to analyze the effect of the viscoelastic insoles placed into the firefighter’s boots on this force during the gait. The magnitude of the impact force (FZI) from the vertical ground reaction force, the time to the production of this force (TZI) and the loading rate (GC) were registered. 39 firefighters without any pathology during 2 years before the study were recruited. Three different walking conditions were tested: 1) gait with firefighter's boots, 2) gait with firefighter's boots and viscoelastic insoles and 3) gait with sport shoes. The results showed a higher production and magnitude of the impact force during gait with firefighter's boots than during gait with sport shoes (13,1 vs. 2,6 % of occurrence of the impact force and 61,39 ± 35,18 %BW (body weight) vs. 49,38 ± 22,99 %BW, respectively). The gait with viscoelastic insoles placed into the firefighter's boots did not show significant differences in any of the parameters characterizing the impact force compared to the gait without insoles. The results of this study show a lower cushioning of the impact force during the gait with firefighter's boots in comparison to the gait with sport shoes and the inefficiency of the viscoelastic insoles placed inside the firefighter's boots to ameliorate the cushioning of the impact force at natural walking speed.

Le processus décisionnel sous-jacent à la rétroaction corrective des enseignants de français langue seconde à l'oral

L’objectif de cette étude qualitative est de décrire et de comprendre le processus décisionnel sous-jacent à la rétroaction corrective d’un enseignant de langue seconde à l’oral. Pour ce faire, elle décrit les principaux facteurs qui influencent la décision de procéder à une rétroaction corrective ainsi que ceux qui sous-tendent le choix d’une technique de rétroaction particulière. Trois enseignantes de français langue seconde auprès d’un public d’adultes immigrants au Canada ont participé à cette recherche. Des séquences complètes d’enseignement ont été filmées puis présentées aux participantes qui ont commenté leur pratique. L’entretien de verbalisation s’est effectué sous la forme d’un rappel stimulé et d’une entrevue. Cet entretien constitue les données de cette étude. Les résultats ont révélé que la rétroaction corrective ainsi que le choix de la technique employée étaient influencés par des facteurs relatifs à l’erreur, à l’apprenant, au curriculum, à l’enseignant et aux caractéristiques des techniques. Ils ont également révélé que l’apprenant est au cœur du processus décisionnel rétroactif des enseignants de langue seconde. En effet, les participantes ont affirmé vouloir s’adapter à son fonctionnement cognitif, à son état affectif, à son niveau de langue et à la récurrence de ses erreurs. L’objectif de cette étude est d’enrichir le domaine de la formation initiale et continue des enseignants de L2. Pour cela, des implications pédagogiques ont été envisagées et la recommandation a été faite de porter à la connaissance des enseignants de L2 les résultats des recherches sur l’efficacité des techniques de rétroaction corrective, particulièrement celles qui prennent en compte les caractéristiques des apprenants.

Le processus décisionnel sous-jacent à la rétroaction corrective des enseignants de français langue seconde à l'oral

L’objectif de cette étude qualitative est de décrire et de comprendre le processus décisionnel sous-jacent à la rétroaction corrective d’un enseignant de langue seconde à l’oral. Pour ce faire, elle décrit les principaux facteurs qui influencent la décision de procéder à une rétroaction corrective ainsi que ceux qui sous-tendent le choix d’une technique de rétroaction particulière. Trois enseignantes de français langue seconde auprès d’un public d’adultes immigrants au Canada ont participé à cette recherche. Des séquences complètes d’enseignement ont été filmées puis présentées aux participantes qui ont commenté leur pratique. L’entretien de verbalisation s’est effectué sous la forme d’un rappel stimulé et d’une entrevue. Cet entretien constitue les données de cette étude. Les résultats ont révélé que la rétroaction corrective ainsi que le choix de la technique employée étaient influencés par des facteurs relatifs à l’erreur, à l’apprenant, au curriculum, à l’enseignant et aux caractéristiques des techniques. Ils ont également révélé que l’apprenant est au cœur du processus décisionnel rétroactif des enseignants de langue seconde. En effet, les participantes ont affirmé vouloir s’adapter à son fonctionnement cognitif, à son état affectif, à son niveau de langue et à la récurrence de ses erreurs. L’objectif de cette étude est d’enrichir le domaine de la formation initiale et continue des enseignants de L2. Pour cela, des implications pédagogiques ont été envisagées et la recommandation a été faite de porter à la connaissance des enseignants de L2 les résultats des recherches sur l’efficacité des techniques de rétroaction corrective, particulièrement celles qui prennent en compte les caractéristiques des apprenants.

Perspective of Healthcare Workers about Digitization in the Healthcare Sector in Armed Forces Hospitals in Taif Region, Saudi Arabia

Aim: The purpose of the present study was to determine the impact of digitization in healthcare on health workers' perceptions in Armed Forces Hospital, Taif. Methodology: A quantitative descriptive design based on deductive approach was used in the study. 370 participants employed in Armed Force hospitals in Taif were recruited based on convenience sampling. A survey was distributed among participants to collect demographic data and data on digitization benefits, challenges, and status and perceptions of health workers. The collected responses were then entered into SPSS software for performing descriptive stats, ANOVA test and regression analysis to determine the relationship between research variables. Results: The demographic results showed more male participants (64.9%) than females (35%), with more participants having a Master's education. Results from the ANOVA test and regression analysis revealed a positive and significant correlation between digitization benefits (0.842), digitization challenges (0.838), and digitization status (0.898) with health workers' perceptions. Also, a 1% change in digitization benefits, challenges, and status can result in an 18% change in perceptions. Conclusion: Overall, the study found a significant and positive relationship impact of digitization of health on perceptions of health workers. Recommendation: It is suggested that future studies investigate the factors and strategies influencing the change of perceptions associated with the digitization of health.

Development of gripping devices based on electroadhesive forces

In a context of technological innovation, the aim of this thesis is to develop a technology that has gained interest in both scientific and industrial realms. This technology serves as a viable alternative to outdated and energy-consuming industrial systems. Electro-adhesive devices (EADs) leverage electrostatic forces for grasping objects or adhering to surfaces. The advantage of employing electrostatics lies in its adaptability to various materials without compromising the structure or chemistry of the object or surface. These benefits have led the industry to explore this technology as a replacement for costly vacuum systems and suction cups currently used for handling most products. Furthermore, the broad applicability of this technology extends to extreme environments, such as space with ultra-high vacuum conditions. Unfortunately, research in this area has yet to yield practical results for industrially effective gripper prototyping. This is primarily due to the inherent complexity of electro-adhesive technology, which operates on basic capacitive principles that does not find satisfying physical descriptions. This thesis aims to address these challenges through a series of studies, starting with the manufacturing process and testing of an EAD that has become the standard in our laboratory. It then delves into material and electrode geometry studies to enhance system performance, ultimately presenting potential industrial applications of the technology. All the presented results are encouraging, as they have yielded shear force values three times higher than those previously reported in the literature. The various applications have demonstrated the significant effectiveness of EADs as brakes or, more broadly, in exerting shear forces. This opens up the possibility of utilizing cutting-edge technologies to push the boundaries of technology to the fullest.

Perception Of Oral And Maxillofacial Surgeons, Orthodontists And Laypersons In Relation To The Harmony Of The Smile.

Harmony is one of the main objectives in surgical and orthodontic treatment and this harmony must be present in the smile, as well as in the face. The aim of the present study was to assess the perceptions of professionals and laypersons in relation to the harmony of the smile of patients with or without vertical maxillary alterations. Sixty observers (oral and maxillofacial surgeons, orthodontists and laypersons) reported the degree of harmony of six smiles using an objective questionnaire and the participants indicated if there was a need for corrective surgery or not. The classification of observers was recorded on a Likert scale from 1 to 5. Mixed regression was used to determine differences between the three groups. Statistically significant differences were found only for the harmony of the smile between the oral and maxillofacial surgeons and laypersons, with laypersons being more critical when assessing the smile. There was no statistical difference between the other groups for the harmony of the smile or the indication of corrective surgery. The patterns of greater or lesser harmony determined by observers during the smile were similar to those found in the literature as the ideal standard in relation to vertical maxillary positioning. Laypersons had a tendency to be more critical in relation to facial harmony than surgeons, although no statistical differences were found in the other groups in relation to the harmony of the smile or indication for the corrective surgery. In addition, the patterns of greater or lesser harmony of the smile determined by the participants were similar to those found in the literature as the ideal standard in relation to vertical maxillary positioning. Overall, the present study demonstrates that adequate interaction between surgeons, orthodontists and laypersons is essential in order to achieve facial harmony with orthodontic and/or surgical treatment. Opinion of specialists and laypersons about the smile in relation to the vertical positioning of the maxilla.

Strain Gauges's Analysis On Implant-retained Prosthesis' Cast Accuracy.

A proper cast is essential for a successful rehabilitation with implant prostheses, in order to produce better structures and induce less strain on the implants. The aim of this study was to evaluate the precision of four different mold filling techniques and verify an accurate methodology to evaluate these techniques. A total of 40 casts were obtained from a metallic matrix simulating three unit implant-retained prostheses. The molds were filled using four different techniques in four groups (n = 10): Group 1 - Single-portion filling technique; Group 2 - Two-step filling technique; Group 3 - Latex cylinder technique; Group 4 - Joining the implant analogs previously to the mold filling. A titanium framework was obtained and used as a reference to evaluate the marginal misfit and tension forces in each cast. Vertical misfit was measured with an optical microscope with an increase of 120 times following the single-screw test protocol. Strain was quantified using strain gauges. Data were analyzed using one-way ANOVA (Tukey's test) (α =0.05). The correlation between strain and vertical misfit was evaluated by Pearson test. The misfit values did not present statistical difference (P = 0.979), while the strain results showed statistical difference between Groups 3 and 4 (P = 0.027). The splinting technique was considered to be as efficient as the conventional technique. The strain gauge methodology was accurate for strain measurements and cast distortion evaluation. There was no correlation between strain and marginal misfit.

Breaking Oil-in-water Emulsions Stabilized By Yeast.

Several biotechnological processes can show an undesirable formation of emulsions making difficult phase separation and product recovery. The breakup of oil-in-water emulsions stabilized by yeast was studied using different physical and chemical methods. These emulsions were composed by deionized water, hexadecane and commercial yeast (Saccharomyces cerevisiae). The stability of the emulsions was evaluated varying the yeast concentration from 7.47 to 22.11% (w/w) and the phases obtained after gravity separation were evaluated on chemical composition, droplet size distribution, rheological behavior and optical microscopy. The cream phase showed kinetic stability attributed to mechanisms as electrostatic repulsion between the droplets, a possible Pickering-type stabilization and the viscoelastic properties of the concentrated emulsion. Oil recovery from cream phase was performed using gravity separation, centrifugation, heating and addition of demulsifier agents (alcohols and magnetic nanoparticles). Long centrifugation time and high centrifugal forces (2h/150,000×g) were necessary to obtain a complete oil recovery. The heat treatment (60°C) was not enough to promote a satisfactory oil separation. Addition of alcohols followed by centrifugation enhanced oil recovery: butanol addition allowed almost complete phase separation of the emulsion while ethanol addition resulted in 84% of oil recovery. Implementation of this method, however, would require additional steps for solvent separation. Addition of charged magnetic nanoparticles was effective by interacting electrostatically with the interface, resulting in emulsion destabilization under a magnetic field. This method reached almost 96% of oil recovery and it was potentially advantageous since no additional steps might be necessary for further purifying the recovered oil.

Resistência à compressão e remoção de folhas da cana-de-açúcar visando à colheita mecânica

Sugarcane holds an important place in the Brazilian economy. Grate part of the sugarcane harvested still accomplished largely manually. Sugarcane harvesters available in Brazil use the technology to chop the cane into 200 to 300 mm billets to allow on the go cane transferring to transport, contradicting the traditional method of whole stalk sugarcane harvesting system. In order to make whole stalk mechanical harvesting system possible, one of the barriers to be expired is the mechanical removal of the straw. The design of a mechanism that accomplishes this operation depends directly on the knowledge of the mechanical properties of the sugarcane related to its resistance to compression and the forces necessary to remove the leaves from the stalk. Compression tests were conducted using the universal testing machine. For leaves removal test by friction, a special apparatus was designed to allow the registration of the normal and traction force. The sugarcane stalk can resist up to 4.9 MPa. With a normal pressure of 0.8 MPa, which correspond to a friction force of 315 N, it is possible to remove the leaves, independent of its location in the sugarcane stalk.

Fundações de construções submetidas a esforços de tração em solo de alta porosidade da região de Campinas - SP

This paper presents the behavior of three bored piles conducted in diabasic soil submitted to uplift forces. The piles were built at the site for Experimental Studies in Soil Mechanics and Foundations of UNICAMP, located in the city of Campinas, Brazil. Field tests have already been conducted at the site (SPT, CPT, DMT and PMT), as well as laboratory tests by using sample soils taken from a well up to 17 m deep. The water table is not checked until a depth of 17 m. In order to check the behavior of the piles when submitted to uplift forces, slow static load tests were carried out as the recommendations of NBR 12131. The carrying capacity of these piles was also provided by means of theoretical methods, appropriate for uplift forces, and through semi-empirical methods appropriate for compression forces, considering only the portion of lateral resistance. The values estimated by using the considered methods were compared to those obtained by means of load tests. One of the tested piles was extracted from the soil to be the subject of a study on its geometry.

Hipotaxe e Gramaticalização: uma Análise das Construções de Tempo e de Condição

This paper studies complex sentences with temporal hypotatic clauses and with conditional hypotatic clauses in order to investigate the degree of grammaticalization shown by these two kinds of utterances. Our hypothesis is that the more the hypotatic clause is integrated to the nuclear clause, the greater is the degree of grammaticalization. Such degree of integration was measured according to three groups of factors, and the results show that, regarding two of the variables evaluated, the conditional clauses are the most integrated to their nucleus, but, in another rank of evaluation, the temporal clauses are the most integrated ones. Considering that this study is based on a functionalist view, the results may be interpreted according to the principle that there is a competition of motivations in the use of language, so that each utterance reflects the balance of such forces.

Uma observação sobre o lugar da teoria da ligação e do critério temático dentro do programa minimalista

In this paper I present some evidencie that forces us to conclude that within the Minimalist Program (Chomsky 1993; 1995), Binding Theory (BT) should be computed after LF (Logical Form). I show that derivations leading to structures containing violations of BT-Principles must converge at LF, since less economical alternative derivations respecting those principles are also ungrammatical. Being irrelevant to the notion of convergence, BT must apply after LF. A similar reasoning reveals that the Theta-Criterion should have the status of a bare output condition appling at LF, since less economical derivations are allowed by the computational system to prevent violations of it.

Estudo comparativo dos métodos de estimativa da idade óssea de Greulich & Pyle e Tanner & Whitehouse

The purpose of this study was to verify whether the Greulich & Pyle (GP), Greulich & Pyle Visual (GPV) and Tanner & Whitehouse (TW) methods for estimating skeletal age could be applied in the Brazilian population, and which of these three methods could be considered more reliable when compared with the chronological age of the individuals. This study was based on one hundred and sixty volunteers (80 females and 80 males) with ages between 6 years and 10 months and 14 years and 9 months. The results showed that for the GP method, the correlations with chronological age were 0.95 for males and 0.97 for females. For the GPV method, the correlations were 0.96 and 0.97, respectively and for TW, 0.96 and 0.97. The results showed that the Greulich & Pyle, Greulich & Pyle Visual and Tanner & Whitehouse methods presented high correlation values when compared with the chronological age of the individuals. Corrective factors were established to make these methods applicable to the Brazilian population.

Estudo da postura corporal e aspectos nutricionais em escolares do ensino fundamental da rede publica

Universidade Estadual de Campinas. Faculdade de Educação Física

A selvagem dança do corpo

Universidade Estadual de Campinas . Faculdade de Educação Física