AS COSTUREIRAS, AS QUEENS E OS SEUS MANTOS: DESTERRITORIALIZAÇÃO, CULTURA MATERIAL E CONSTRUÇÃO DO LUGAR

Durante as décadas de 1980 e de 1990 a noção de lugar foi, na literatura antropológica, sujeita a uma abordagem crítica que debateu as dimensões metodológicas e conceptuais envolvidas na sua construção. No seguimento dessa abordagem, surgiram propostas de trabalho que, de maneiras muito diversas, conseguiram ultrapassar as limitações das concepções mais clássicas da figura do lugar. Essas propostas revelaram, no entanto, que mesmo quando estamos face a uma lógica de desterritorialização, a figura do lugar pode reaparecer (embora obviamente transmutada, visto construir-se no interior de outras lógicas sociais, culturais e económicas). Partindo de uma etnografia realizada na Ilha do Pico, o texto explora algumas das inovações, provenientes dos EUA no início do século XX, que foram introduzidas nas Festas do Espírito Santo. A principal inovação prende-se com a emergência de novos personagens: as rainhas (“queens”) coroadas durante o ritual, seguidas pelas costureiras indispensáveis à confecção dos seus vestidos e mantos. Centrado nos processos de feitura dos mantos, o texto pretende mostrar como a cultura material local se constrói e se transforma no interior de um movimento transcontinental constante de pessoas, rituais, coisas e técnicas. Num contexto transnacional, a mobilidade das pessoas pode objetificar-se em coisas que são feitas localmente, participando assim a desterritorialização na construção do lugar.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Acute renal failure due to abdominal compartment syndrome: report on four cases and literature review

We report on 4 cases of abdominal compartment syndrome complicated by acute renal failure that were promptly reversed by different abdominal decompression methods. Case 1: A 57-year-old obese woman in the post-operative period after giant incisional hernia correction with an intra-abdominal pressure of 24 mm Hg. She was sedated and curarized, and the intra-abdominal pressure fell to 15 mm Hg. Case 2: A 73-year-old woman with acute inflammatory abdomen was undergoing exploratory laparotomy when a hypertensive pneumoperitoneum was noticed. During the surgery, enhancement of urinary output was observed. Case 3: An 18-year-old man who underwent hepatectomy and developed coagulopathy and hepatic bleeding that required abdominal packing, developed oliguria with a transvesical intra-abdominal pressure of 22 mm Hg. During reoperation, the compresses were removed with a prompt improvement in urinary flow. Case 4: A 46-year-old man with hepatic cirrhosis was admitted after incisional hernia repair with intra-abdominal pressure of 16 mm Hg. After paracentesis, the intra-abdominal pressure fell to 11 mm Hg.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Torrefação de biomassa de Arundo donax L. e de Phoenix canariensis com vista à sua valorização energética ou material

A torrefação é vista como um pré-tratamento térmico que introduz modificações na biomassa, ou em resíduos de biomassa, que facilitam o seu processamento mecânico e aumentam a sua estabilidade e densidade energética, potenciando, assim, uma valorização posterior. Neste trabalho, estudou-se o impacte da torrefação na gama de 200 a 350 ºC e tempos de residência entre 15 e 90 min nas propriedades da biomassa proveniente da herbácea Arundo donax L. e das palmeiras Phoenix canariensis, espécies muito abundantes em vários locais do país, tendo em vista a sua posterior valorização. A proliferação descontrolada do arundo e a praga do escaravelho das palmeiras leva a que estas espécies sejam alvo de frequentes operações de remoção. A sua estrutura altamente fibrosa dificulta e encarece estas operações, que acarretam custos significativos para as câmaras municipais, e não se conhecem medidas para a sua valorização material ou energética. A torrefação foi também aplicada a peletes de resíduos de pinheiro, na gama de 200 a 250 ºC e com tempos de residência de 30 e 60 min, para averiguar o seu impacte na qualidade desse biocombustível sólido. A torrefação permitiu obter peletes mais resistentes à biodegradação, devido à redução do teor de humidade para valores residuais, sem aumentar significativamente o seu teor de cinzas e sem afetar de forma relevante a sua durabilidade, o teor de finos ou a densidade aparente. Com a biomassa de arundo e de palmeira obtiveram-se produtos com maior poder calorífico e com melhor moabilidade. No entanto, a acentuada diminuição dos rendimentos mássico e energético e o elevado teor de cinzas constrangem a sua utilização como biocombustíveis sólidos. Desta forma, optou-se por testar a sua valorização como adsorventes do corante azul de metileno, bastante comum, por exemplo, na indústria têxtil, nos curtumes ou nas industrias do papel. Os estudos de adsorção revelaram maior afinidade pelo corante por parte da biomassa sujeita a torrefação mais ligeira, com eficiências de remoção muito próximas das do carvão ativado comercial, para concentrações iniciais de corante até 200 mg/L. As isotérmicas foram melhor ajustadas ao modelo de Langmuir, que revelou capacidades máximas de adsorção na monocamada entre 59,92 e 92,68 mg/g, tendo as curvas de cinética sido melhor descritas pelo modelo de pseudo-segunda ordem. A adsorção é bastante rápida nos primeiros minutos, essencialmente devido a atrações eletrostáticas, sendo inicialmente controlada pela difusão no filme e depois pela difusão nos poros. Os adsorventes revelaram seletividade por um corante catiónico e permitiram dessorção de corante, ao contrário do verificado com o carvão ativado comercial, o que é um aspeto da maior relevância tendo em mente a regeneração do adsorvente e a recuperação do corante.

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).

Corporate governance failure at PT

The following case study depicts the bitter transfiguration of Portugal Telecom, SGPS (PT), a multinational telecommunications company that was once an honourable flag of innovation, corporate governance standards in Portugal and overseas. It scrutinises the controversial episodes that paved the way for the pitiful condition in which PT is nowadays: a company that carries the weight of a ruinous €897 million investment in a defaulted company and no more than a 25.6% stake in a heavily indebted Brazilian carrier. The free-fall is made, ironically, of a complete disregard for best corporate governance practices, allowing for PT’s major shareholders to take over the helm of the company, using it selfishly as a cash cow.

Material Zoológico depositado nas coleções sistemáticas de entomologia do INPA, resultante do "Projeto INPA/MAX-PLANK" (Convênio CNPq/MGP)

As coleções de Entomolologia Sistemática do Instituto nacional de Pesquisas da Amazônia (INPA) em Manaus, Brasil, no momento, contém aproximadamente 16.350 exemplares de invertebrados e vertebrados identificados, representando 330a espécies e incluindo 692 tipos que foram depositados entre 1940 e 1982 por pesquisadores e associados do Instituto Max-Planck de Limnologia em Plön, Alemanha Ocidental.

O âmbito de aplicação material da legislação de proteção de dados pessoais e o tratamento de imagem por pessoa singular

Images have gained a never before seen importance. Technological changes have given the Information Society extraordinary means to capture, treat and transmit images, wheter your own or those of others, with or without a commercial purpose, with no boundaries of time or country, without “any kind of eraser”. From the several different ways natural persons may engage in image processing with no commercial purpose, the cases of sharing pictures through social networks and video surveillance assume particular relevance. Consequently there are growing legitimate concerns with the protection of one's image, since its processing may sometimes generate situations of privacy invasion or put at risk other fundamental rights. With this in mind, the present thesis arises from the question: what are the existent legal instruments in Portuguese Law that enable citizens to protect themselves from the abusive usage of their own pictures, whether because that image have been captured by a smartphone or some video surveillance camera, whether because it was massively shared through a blog or some social network? There is no question the one's right to not having his or her image used in an abusive way is protected by the Portuguese constitution, through the article 26th CRP, as well as personally right, under the article 79th of the Civil Code, and finally through criminal law, articles 192nd and 193rd of the Criminal Code. The question arises in the personal data protection context, considering that one's picture, given certain conditions, is personal data. Both the Directive 95/46/CE dated from 1995 as well as the LPD from 1998 are applicable to the processing of personal data, but both exclude situations of natural persons doing so in the pursuit of activities strictly personal or family-related. These laws demand complex procedures to natural persons, such as the preemptive formal authorisation request to the Data Protection National Commission. Failing to do so a natural person may result in the application of fines as high as €2.500,00 or even criminal charges. Consequently, the present thesis aims to study if the image processing with no commercial purposes by a natural person in the context of social networks or through video surveillance belongs to the domain of the existent personal data protection law. To that effect, it was made general considerations regarding the concept of video surveillance, what is its regimen, in a way that it may be distinguishable from Steve Mann's definition of sousveillance, and what are the associated obligations in order to better understand the concept's essence. The application of the existent laws on personal data protection to images processing by natural persons has been analysed taking into account the Directive 95/46/CE, the LPD and the General Regulation. From this analysis it is concluded that the regimen from 1995 to 1998 is out of touch with reality creating an absence of legal shielding in the personal data protection law, a flaw that doesn't exist because compensated by the right to image as a right to personality, that anyway reveals the inability of the Portuguese legislator to face the new technological challenges. It is urgent to legislate. A contrary interpretation will evidence the unconstitutionality of several rules on the LPD due to the obligations natural persons are bound to that violate the right to the freedom of speech and information, which would be inadequate and disproportionate. Considering the recently approved General Regulation and in the case it becomes the final version, the use for natural person of video surveillance of private spaces, Google Glass (in public and private places) and other similar gadgets used to recreational purposes, as well as social networks are subject to its regulation only if the images are shared without limits or existing commercial purposes. Video surveillance of public spaces in all situations is subject to General Regulation provisions.

Enraizamento de estacas de material juvenil de Pau-rosa (Aniba rosaeodora Ducke - Lauraceae)

RESUMOO presente, trabalho teve como objetivo o enraizamento de estacas de material juvenil ramos laterais e terminais) de pau-rosa, através do uso das concentrações de 2000 ppm, 4000 ppm e 6000 ppm de ácido indol-3-butírico (AIB) na forma líquida. Αs condições do enraizamento αs estacas foram oferecidas mediante o uso de ncbulização intermitente, regulada em 20 segundos para espécies com intervalos de 20 minutos. O substrato utilizado foi terriço + areia, na proporção de 4:1. Semanalmente foram feitas aplicações de fertilizante foliar. Aos 210 dias do plantio, as estacas foram retiradas, do substrato e avaliados os seguintes parâmetros: porcentagem de enraizamento, porcentagem de sobrevivência, tamanho das raízes e Peso da matéria fresca das raízes. Os resultados obtidos mostram que a emissão de raízes das estacas de material juvenil, possivelmente independe do uso do ácido indol-3-butírico (AIB).

Sources to study Antiquity: Between texts and material culture. Abstract Book

FCT

Estratégias pedagógicas na aprendizagem da emissão de som no clarinete: respiração, material e metodologias de estudo

Relatório de estágio de mestrado em Ensino de Música

Análisis mecánico de albañilería arqueológica de adobe bajo cargas de compresión uniaxial: El caso de Huaca de la Luna

This article presents an experimental and numerical study for the mechanical characterization under uniaxial compressive loading of the adobe masonry of one of the most emblematic archaeological complex in Peru, 'Huaca de la Luna' (100-650AD). Compression tests of prisms were carried out with original material brought to the laboratory. For measuring local deformations in the tests, displacement transducers were used which were complemented by a digital image correlation system which allowed a better understanding of the failure mechanism. The tests were then numerically simulated by modelling the masonry as a continuum media. Several approaches were considered concerning the geometrical modelling, namely 2D and 3D simplified models, and 3D refined models based on a photogrammetric reconstruction. The results showed a good approximation between the numerical prediction and the experimental response in all cases. However, the 3D models with irregular geometries seem to reproduce better the cracking pattern observed in the tests.

Lightweight adjustable partition system: evaluation of resistance to horizontal loads and functional failure from impacts

This paper presents and discusses the results of the serviciability and use condition tests carried on an innovative solution for partitions, designated AdjustMembrane developed within a research project. The proposed system is a modular non-loadbearing wall, tensioned between the pavements and ceiling slabs, which are used as anchoring elements. It allows several advantages, related with the weight reduction to achieve a good sustainable performance, such as the reduction of construction costs, energy, and materials, and it is easy to recycle and to reuse, allowing self-construction. Apart from a general presentation of the partition technology, this paper presents and discusses the results of experimental tests carried out. From the results obtained, it is possible to conclude that the solution fulfils the requirements for this typology of wall in terms of resistance to horizontal loads induced by soft and hard body impacts.