Experimental investigation on TBAB clathrate hydrate slurry flows in a horizontal tube: Forced convective heat transfer behaviors

Tetra-n-butyl-ammonium bromide (TBAB) clathrate hydrate slurry (CHS) is one kind of secondary refrigerants, which is promising to be applied into air-conditioning or latent-heat transportation systems as a thermal storage or cold carrying medium for energy saving. It is a solid-liquid two phase mixture which is easy to produce and has high latent heat and good fluidity. In this paper, the heat transfer characteristics of TBAB slurry were investigated in a horizontal stainless steel tube under different solid mass fractions and flow velocities with constant heat flux. One velocity region of weakened heat transfer was found. Moreover, TBAB CHS was treated as a kind of Bingham fluids, and the influences of the solid particles, flow velocity and types of flow on the forced convective heat transfer coefficients of TBAB CHS were investigated. At last, criterial correlations of Nusselt number for laminar and turbulent flows in the form of power function were summarized, and the error with experimental results was within 20%.

Uniform mems chip temperatures in the nucleate boiling heat transfer region by selecting suitable, medium boiling number range

The not only lower but also uniform MEMS chip temperatures can he reached by selecting suitable boiling number range that ensures the nucleate boiling heat transfer. In this article, boiling heat transfer experiments in 10 silicon triangular microchannels with the hydraulic diameter of 55.4 mu m were performed using acetone as the working fluid, having the inlet liquid temperatures of 24-40 degrees C, mass fluxes of 96-360 kg/m(2)s, heat fluxes of 140-420 kW/m(2), and exit vapor mass qualities of 0.28-0.70. The above data range correspond to the boiling number from 1.574 x 10(-3) to 3.219 x 10(-3) and ensure the perfect nucleate boiling heat transfer region, providing a very uniform chip temperature distribution in both streamline and transverse directions. The boiling heat transfer coefficients determined by the infrared radiator image system were found to he dependent on the heat Axes only, not dependent on the mass Axes and the vapor mass qualities covering the above data range. The high-speed flow visualization shows that the periodic flow patterns take place inside the microchannel in the time scale of milliseconds, consisting of liquid refilling stage, bubble nucleation, growth and coalescence stage, and transient liquid film evaporation stage in a full cycle. The paired or triplet bubble nucleation sites can occur in the microchannel corners anywhere along the flow direction, accounting for the nucleate boiling heat transfer mode. The periodic boiling process is similar to a series of bubble nucleation, growth, and departure followed by the liquid refilling in a single cavity for the pool boiling situation. The chip temperature difference across the whole two-phase area is found to he small in a couple of degrees, providing a better thermal management scheme for the high heat flux electronic components. Chen's [11 widely accepted correlation for macrochannels and Bao et al.'s [21 correlation obtained in a copper capillary tube with the inside diameter of 1.95 mm using R11 and HCFC123 as working fluids can predict the present experimental data with accepted accuracy. Other correlations fail to predict the correct heat transfer coefficient trends. New heat transfer correlations are also recommended.

Transient flow patterns and bubble slug lengths in parallel microchannels with oxygen gas bubbles produced by catalytic chemical reactions

Transient flow patterns and bubble slug lengths were investigated with oxygen gas (O-2) bubbles produced by catalytic chemical reactions using a high speed camera bonded with a microscope. The microreactor consists of an inlet liquid plenum, nine parallel rectangular microchannels followed by a micronozzle, using the MEMS fabrication technique. The etched surface was deposited by the thin platinum film, which is acted as the catalyst. Experiments were performed with the inlet mass concentration of the hydrogen peroxide from 50% to 90% and the pressure drop across the silicon chip from 2.5 to 20.0 kPa. The silicon chip is directly exposed in the environment thus the heat released via the catalytic chemical reactions is dissipated into the environment and the experiment was performed at the room temperature level. It is found that the two-phase flow with the catalytic chemical reactions display the cyclic behavior. A full cycle consists of a short fresh liquid refilling stage, a liquid decomposition stage followed by the bubble slug flow stage. At the beginning of the bubble slug flow stage, the liquid slug number reaches maximum, while at the end of the bubble slug flow stage the liquid slugs are quickly flushed out of the microchannels. Two or three large bubbles are observed in the inlet liquid plenum, affecting the two-phase distributions in microchannels. The bubble slug lengths, cycle periods as well as the mass flow rates are analyzed with different mass concentrations of hydrogen peroxide and pressure drops. The bubble slug length is helpful for the selection of the future microreactor length ensuring the complete hydrogen peroxide decomposition. Future studies on the temperature effect on the transient two-phase flow with chemical reactions are recommended.

生物活性有机锗及HPCPC双水相分离生物大分子的研究

本论文内容主要分为4个部分：“有机锗化合物抑制Maillard反应的研究”、“Ge-132对体外培养幼鼠胰岛细胞的作用研究”、“PEG／磷酸盐双水相体系中生物大分子分配的研究”和“HPCPC（High Performance Centrifugal Partition Chromatography，高效离心分配色谱）双水相体系对生物大分子分离的研究”。前两部分主要从有机锗化合物防治糖尿病及其并发症的代谢机理和细胞学角度进行研究，本文引入HPCPC和双水相体系分离生物大分子的技术，为进一步阐明有机锗化合物在Maillard反应过程中的作用机理：对双水相体系中生物大分子的分配及HPCPC在双水相体系中分离生物大分子也做了大量的基础性研究，为开发HPCPC的应用作出了有价值的探索工作。本论文的主要创新点归纳如下：一、有机锗化合物对Maillard反应的抑制作用：针对国际上有机锗发展的前沿课题，在国内首先开展了有机锗化合物对Maillard反应抑制作用的研究，取得了有价值的研究结果。1、在模拟体内的生理条件下，研究了不同浓度Ge-132对精氨酸、组氨酸、甘氨酸和缬氨酸对Maillard反应荧光峰强度的影响：不同类型的氨基酸Maillard反应产物结构上的差异和不同浓度有机锗对组氨酸糖化反应420nm处特征吸光度的影响。2、苯丙氨酸是侧链带有苯环的芳香族氨基酸，是一种具有弱的天然荧光的生物小分子，其荧光最大发射位置在281.6nm。由于aillard反应是葡萄糖和氨基酸的-NHR基发生的反应，其反应产物的特征荧光在440nm附近。这两类荧光的发射位置相差较远，相互之间没有影响，因此利用荧光法观察Phe在反应过程中自身的荧光变化和Ge-132对Phe的Maillard反应荧光产物的抑制情况。3、血清白蛋白是哺乳动物体内的重要蛋白质，可作为多种内源性、外源性物质的存储和转运蛋白，其Maillard反应已经被广泛重视，但较复杂的实验条件限制了它的研究。通过观测蛋白质Maillard反应产物特征荧光的变化是一有效的研究方法。BSA的内源性荧光是由肽链色氨酸和酪氨酸残基贡献的，其最大发射位置340nm左右。其Maillard反应产物的特征荧光在440nm附近，这两类荧光发射位置相差较远，基本上没有影响，因此能够通过荧光光谱研究BSA的Maillard反应荧光产物的情况。本文观测了Ge-132对BSA的Maillard反应荧光产物的抑制作用，同时还通过荧光法确定了一个文献中没有的新的反应位点。4、本文研究了具有更高水溶性的一类双有机锗化合物(HO)_2Ge(CHR_1CHR_2COOH)_2．2H_20抑制Maillard反应的特性，结果证明它比Ge-132具有更高的抑制作用，我们通过化合物的构效关系解释了上述作用的机制。5、本文研究了Tb(Ge-132)_3和Eu(Ge-132)_3两种含稀土的配合物对氨基酸、蛋白质Maillard反应的影响，观察了稀土离子对Maillard反应体系的影响，对实验现象作出了合理的解释。二、Ge-132对体外培养幼鼠胰岛细胞的作用为进一步考察有机锗对糖尿病的防治作用，我们与白求恩医大合作，首次观察了Ge-132对体外培养的幼鼠胰岛细胞结构和功能的影响，研究了不同剂量的含锗化合物对幼鼠胰岛细胞分泌胰岛素的作用，认为低浓度的Ge-132对胰岛细胞分泌胰岛素具有明显的促进作用。该部分内容为首次报导。三、PEG／磷酸盐双水相体系中生物大分子分配的研究双水相萃取TPE(Aqueous Two-Phase Extraction)具有下述优点：生物相容性好、界面张力低、能量低、易于工业规模的放大、可以进行连续操作等。本论文系统地研究了各种蛋白质在PEG／磷酸盐体系中的分离情况，如在各种pH条件下，从6.8到9.2，各种分子量的PEG，包括PEGl000，2000，5000，6000，10000，和20000和磷酸盐双水相体系的物化性质，以及对lysozyme（溶菌酶），BSA（牛血清白蛋白），HSA（人血清白蛋白），Hemoglobin（血红蛋白）在各种体系中的分配系数，探讨了各种因素对生物大分子分配的影响。四、HPCPC在双水相体系对生物大分子分离的研究由于荧光光谱法证实了Ge-132对牛血清白蛋白Maillard反应的抑制作用。但对于如何能够分离出糖化产物，达到进行定量表征的目的是我们研究的一个重要内容。九十年代初，由日本研制出一种色谱中新技术HPCPC。HPCPC与传统的液相色谱(LC)和高效液相色谱(HPLC)不同，不需要固体作为支持体。流动相和固定相分别为两种不相混溶的液体，通过离心力的作用使其中一相作为固定相保持在类似多级萃取器的微小分配槽中，另一相作为流动相流经固定相。HPCPC在双水相体系的应用是一种利用多级连续萃取从双水相中分离生物物质的方法它具有运行时间快、高效高选择性，流动相与固定相之间比例可以任意改变，并在任何pH值均可进行正向和反向操作并且实验室规模可一步直接放大到生产规模。它不仅可以作为一种分离的工具，而且也是一种研究生物萃取反应动力学机理，反映热力学与动力学之间相关性的重要方法。本论文中研究了常用的两种双水相体系，利用PEG6000／Dex20000／H_20对BSA和Maillard反应产生的糖化BSA进行了初步分离，取得了一些阶段性结论。另外，通过对各种条件的筛选，选择了具有代表性的lysozyme和BSA，BSA和血红蛋白(Hb)进行HPCPC色谱仪上的分离，研究了色谱分离条件如：转数、流速、pH等对分离效率及理论塔板数的影响，取得了一系列重要的结论。为工业上大规模的生物样品分离提供了重要的参数。

Numerical simulation of a bubble rising in shear-thinning fluids

The motion of a single bubble rising freely in quiescent non-Newtonian viscous fluids was investigated experimentally and computationally. The non-Newtonian effects in the flow of viscous inelastic fluids are modeled by the Carreau theological model. An improved level set approach for computing the incompressible two-phase flow with deformable free interface is used. The control volume formulation with the SIMPLEC algorithm incorporated is used to solve the governing equations on a staggered Eulerian grid. The simulation results demonstrate that the algorithm is robust for shear-thinning liquids with large density (rho(1)/rho(g) up to 10(3)) and high viscosity (eta(1)/eta(g) up to 10(4)). The comparison of the experimental measurements of terminal bubble shape and velocity with the computational results is satisfactory. It is shown that the local change in viscosity around a bubble greatly depends on the bubble shape and the zero-shear viscosity of non-Newtonian shear-thinning liquids. The shear-rate distribution and velocity fields are used to elucidate the formation of a region of large viscosity at the rear of a bubble as a result of the rather stagnant flow behind the bubble. The numerical results provide the basis for further investigations, such as the numerical simulation of viscoelastic fluids. (C) 2010 Elsevier B.V. All rights reserved.

Experimental Investigation of Performance of a Miniature Direct Methanol Fuel Cell in Short-Term Microgravity

Experimental study of a liquid fed direct methanol fuel cell has been conducted in different gravity environments. A small single cell with 5 cm x 5 cm active area has single serpentine channel on the graphite cathode polar plate and 11 parallel straight channels on the graphite anode flow bed. Cell voltage and current have been measured and two-phase flow in anode channels has been in situ visually observed. The experimental results indicate that the effect of gravity on power performance of the direct methanol fuel cell is large when the concentration polarization governs fuel cells operation. Gravitational effect becomes larger at higher current density. Increasing methanol feeding molarity is conducive to weaken the influence of gravity on performance of liquid fed direct methanol fuel cells. Increasing feeding flow rate of methanol solution from 6 to 15 ml/min could reduce the size of carbon dioxide bubbles, while the influence of gravity still exist. Transport phenomena inside direct methanol fuel cells in microgravity is also analyzed and discussed.

用双流体模型模拟超声速气固两相流动

采用了双流体模型对JPL(Jet Propulsion Laboratory)喷管中气固两相流动以及超声速射流两相流动进行了数值模拟,并研究了可压缩两相流动中气相与颗粒的相互作用规律.自主开发的一般曲线坐标系下二维轴对称可压缩双流体程序Solve2D,对气相求解Navier-Stokes(N-S)方程组,采用k-ε湍流模型,颗粒相求解Euler方程组.对JPL喷管内的两相流场和湍流两相射流流场进行了数值模拟,研究了不同颗粒质量百分数以及不同颗粒直径时的气固两相流场的流动规律.

微重力气液两相流动与池沸腾传热

综述了近年来中国科学院微重力重点实验室(国家微重力实验室)完成的一系列微重力气液两相流动与池沸腾传热方面的地基实验、飞行实验和理论研究等方面获得的主要成果.在微重力气液两相流动方面, 提出了半理论Weber数模型用于预测微重力条件下气液两相弹一环状流转换, 并采用Monte Carlo方法, 针对气泡初始尺寸对泡一弹状流转换的影响进行数值研究.通过俄罗斯"和平号"空间站与IL-76失重飞机实验, 获得了微重力下的气液两相流型图, 与此同时在地面利用小尺度毛细管模型模拟了微重力气液两相流动特征.实验测量了微重力气液两相流压降, 并基于微重力流动特性建立了一个泡状流压降关联模型.在微重力池沸腾传热方面, 利用我国返回式卫星完成了两次空间实验, 其中, 第22颗返回式卫星搭载铂丝表面R113池沸腾实验采用控制温度的稳态加热方式, 而实践8号育种卫星搭载平面FC-72池沸腾实验则采用控制加热电压的准稳态加热方式.同时, 还进行了地面常重力和落塔短时微重力条件下的对比实验研究.观察到丝状加热表面微重力时轻微的传热强化现象, 而平板加热表面微重力核态池沸腾低热流时传热强化、高热流时传热恶化.微重力实验中观察到气泡脱落前存在横向运动现象, 据此分析了气泡行为与传热之间关系, 并提出了一个预测丝状加热表面气泡脱落直径的半理论模型.旨在对相关领域的进一步发展和空间两相流系统的应用提供数据及理论支持

微小卫星贮箱内两相流界面变形定位及控制管理

液化气推进技术是微小伴随卫星在轨飞行采用的一种新型推进技术. 微小伴星空间调姿、变轨过程需精确的推力控制, 因此必须了解卫星推进系统中推进剂的形位分布. 本文理论分析了空间微重力环境下液化气推进剂气/液界面的形位分布及变化, 并通过落塔实验验证了微重力环境下有效控制液体推进剂的管理方法.

Thermal analysis of microstructural evolution of Al2O3 surface modified layers

Solidification behavior and microstructural evolution of surface modified layers in plasma cladding technique are studied via numerical simulations. Both the coupling effect of temperature and solid volume fraction are considered in the proposed thermal analytical model, by which the transient temperature distributions are calculated and the shape of melting pool is determined. Furthermore, we perform microscopic thermal analysis on the nucleation and growth behaviors of ceramic hardening phases and dendrites, as well as the kinetics of related two-phase flow systems. By comparing with experimental observations, the evolution mechanisms of the morphology of Al2O3 ceramic hardening layer are explained. Based on the above results, a relationship among the scanning velocity of plasma stream, dendritic growth rate and the advancing speed of solid/liquid interface is found, and an energy criterion is proposed for predicting the pushing/engulfing transition of ceramic particles by grain growth fronts. (C) 2009 Elsevier B.V. All rights reserved.

粗枝云杉( Picea asperata Mast.)天然群体的遗传变异

西南地区在我国的经济发展和生态环境建设中占重要地位，但也是我国生态环境最脆弱的地区之一，生态系统退化，生态功能减弱，严重制约着西南林业的可持续经营与发展。本项目采用DNA 分子标记SSR 研究不同生境条件下粗枝云杉群体的遗传变异及其时空分布格局，考察遗传变异与复杂的山地生态环境间的潜在联系，系统地揭示粗枝云杉天然群体与环境系统相互作用的生态适应与分子进化机制。粗枝云杉适应性强，生长迅速，在植树造林和工业用材方面占有重要地位，研究成果可为中国西南部亚高山天然林的可持续经营及退化生态系统的恢复与重建提供理论依据和科学指导。主要研究结果如下： 1. SSR 位点变异丰富，等位基因频率的分布格局多样。7 个SSR 标记全是多态位点，每位点的等位基因数变化范围为13~24，平均为19.9 个。SSR 位点的等位基因片段长度范围变化较大。73.1%的等位基因变异遵循逐步突变模型(SSM)而发生1 个重复基元的变化，22.3%和4.6%的变异分别按两阶段突变模型(TMP)发生1 个重复基元以上的变化和在SSR 位点侧翼区发生1 个碱基变化的插入-删除事件。 2. 粗枝云杉拥有中等偏高水平的遗传多样性和相对大的群体间遗传分化。通过分析代表10 个群体的250 个个体在7 个SSR位点的变化，调查了源自中国西南山区的粗枝云杉的微卫星变异。相当高的遗传多样性和强烈的群体分化发生在粗枝云杉中， 其群体平均Nei's 期望杂合度为0.707 ， 群体间遗传距离为0.121~0.224(FST)和0.100~0.537(RST)。然而，群体间遗传距离与地理距离之间无相关性，从而排除了简单的距离分离模式并暗示迁移不是影响粗枝云杉遗传变异格局的主要因素。事实上，使用私有等位基因估算的基因流数量非常低，仅等于0.753。等位基因置换检验(Allele permutation tests)揭示逐步突变及遗传漂变都对群体间分化有贡献。另外，在多数位点检测到显著的群体间遗传差异，这个结果说明自然选择，假设通过环境压力，是引起粗枝云杉微地理分化的主要因素之一。根据SSR基因型，250 个粗枝云杉个体的70%被正确地归类入其各自的来源群体，结果表明微卫星(SSR)对区分来自中国不同生态地理位点的粗枝云杉基因型是有效的。 3. 在SSR、RAPD 和AFLP 位点，显著的群体间遗传结构被发现的，但三种标记间遗传分化程度和群体遗传关系有差异。利用来自10 个群体的247 个个体，我们报告了关于样本粗枝云杉群体间遗传关系的总体看法。根据各自对评价遗传关系的信息能力和适用性，SSR、RAPD 和AFLP 标记被选用，三种技术非常有效地区别这些基因型。使用的SSR、RAPD 和AFLP 标记分别估计平均Dice 相似性系数。Mantel 检验产生显著但相对低的共表型适合度(RAPD = 0.63£AFLP = 0.60和SSR = 0.75)。比较三种标记系统，RAPD 和AFLP 共表型指数相对高地相关(r =0.59)，而RAPD 和SSR 及SSR 和AFLP 之间的相关系数分别是0.53 和0.35。所有系统树，包括不同标记资料结合获得的系统树，反映了多数群体依据它们的地理条件而成某种特定关系。结果暗示单个或结合标记系统能用来深入洞察粗枝云杉遗传研究，并且不同标记系统合并资料能提供更可靠的信息。 Southwestern region plays an important role in economic developmentand ecological construction in China. Yet, it is also one of the weak regionsof ecological environment in China with degraded ecosystem and imperfectfunction, which restricts the sustaining management and development ofsouthwestern forestry. The genetic variation and spatial distribution patternof P. asperata populations originating from different habitats wereinvestigated using SSR molecular markers in this study. The correlationsbetween genetic variation and ecological and environmental conditionswere detected, and the interaction between P. asperata populations andenvironmental system and the mechanism of ecological adaption -molecular evolution were revealed. Given the significant ecological andeconomic roles of the fast-growing and wide-adaptive species in reforestation and production of pulp wood and timber, the study couldprovide a strong theoretical evidence and scientific direction for thesustaining management of subalpine natural forest, and the afforestationand rehabilitation of degraded ecosystem. The results are as follows: 1. The genetic variation at SSR loci was abundant and the distributionof allelic frequencies was uneven. All seven loci were polymorphic, and thenumber of alleles per locus varied from 13 to 24 with a mean valueequaling 19.9. The allele sizes at SSR loci were found to vary widely.73.1% of allelic variation followed stepwise mutation model (SSM) whichresults increase or decrease by one repeat type, and 22.3% and 4.6% wereresulted from two-phase mutation model (TMP) with allele size varying bymore than one repeat type and from insertion-deletion events in theflanking regions at SSR loci with a single basepair changing, respectively. 2. P. asperata possessed a moderate to high level of genetic diversityand considerable genetic differentiation. Microsatellite variation of P.asperata. originating from the mountains of southwestern China wasinvestigated by analyzing variation at seven SSR loci in 250 individualsrepresenting ten populations. A fair degree of genetic diversity and strongpopulation subdivision occurred with the mean gene diversity (H) of 0.707,and genetic distances among populations varying between 0.121 and 0.224(FST) and between 0.100 and 0.537 (RST). However, inter-populationgenetic distances showed no correlation with geographic distances between the population sites. This ruled out a simple isolation by distance modeland suggested that migration does not have a great impact. In fact, theamount of gene flow, detected using private alleles, was very low, equalingonly 0.753. Allele permutation tests revealed that stepwise-like mutations,coupled with genetic drift, could contribute to population differentiation.Moreover, significant genetic differences between populations weredetected at most loci. The results indicate that natural selection, presumablythrough environmental stress, may be one of the main factors causingmicro-geographical differentiation in the genetic structure of P. asperata.Based on SSR genotypes, 70% of the 250 individuals were correctlyclassified into their sites of origin. This suggests that microsatellites (SSRs) are effective in distinguishing genotypes of P. asperata originating fromdiverse eco-geographical sites in China. 3. Using a set of 247 individuals from ten P. asperata populations wereport an overview on the genetic relationship among the sampled P.asperata populations. RAPD, AFLP and SSR were used in terms of theirinformativeness and applicability for evaluate relationship and all threetechniques discriminated the genotypes very effectively. Mean Dicesimilarities coefficient were estimated using RAPD, AFLP and SSR,respectively. The Mantel test resulted in a significant but relatively low fit(RAPD = 0.63, AFLP = 0.60 and SSR = 0.75) of cophenetic values.Comparing the three marker systems to each other, RAPD and AFLP cophenetic indices were highly correlated (r = 0.59), while correlationcoefficient between RAPD and SSR was r = 0.53 and between SSR andAFLP was r = 0.35. For all markers a relatively high similarity indendrogram topologies was obtained although some differences wereobserved. All the dendrograms, including that obtained by the combineduse of all the marker data, reflect some relationships for most of thepopulations according to their geographic conditions. The results indicatethat single or combined marker system could be used to insight into geneticstudy in P. asperata and the combined data of different marker systems canprovide more reliable information.

The Study of Electroactive Block Copolymer Containing Aniline Pentamer Isolated from Different Solvents

For the films and powder of polymers containing conductive oligomer are usually obtained from solution, the choice of better solvents for the regular arrangement of oligomers is very important for the higher conductivity. Because of the poor solubility of the oligomers, it is difficult to study the arrangement directly in most common solvents, so, we synthesized a triblock copolymer, mPEG2k-aniline pentamer-mPEG2k, as the model to investigate the arrangement-solvent relationship. For the poor solubility of the AP block in common solvents, the copolymer self-assembled into spheric micelles in toluene and into lamellar crystals in water and THF. The crystallinity (X-c) and crystallization temperature (T-c) values of mPEG blocks in powders prepared from different solvents differed obviously, which may be the effect of different self-assembled structures. From the two-phase model of one-dimensional electron density correlation function of SAXS, the long period of copolymer prepared from THF was presumably equal to the long period of pure mPEG plus the chain length of AP, which demonstrates that the AP blocks arrange regularly in the noncrystalline regions.

Low-temperature synthesis of oil-soluble CdSe, CdS, and CdSe/CdS core - Shell nanocrystals by using various water-soluble anion precursors

Colloidal CdSe and CdS quantum dots were synthesized at low temperatures (60-90 degrees C) by a two-phase approach at a toluene-water interface. Oil-soluble cadmium myristate (Cd-MA) was used as cadmium source, and water-soluble Na2S, thiourea, NaHSe, Na2SeSO3, and selenourea were used as sulfur and selenium sources, respectively. When a cadmium precursor in toluene and a selenium precursor in water were mixed, CdSe nanocrystals were achieved at a toluene-water interface in the range of 1.2-3.2 nm in diameter. Moreover, we also synthesized highly luminescent CdSe/CdS core-shell quantum dots by a two-phase approach using poorly reactive thiourea as sulfur source in an autoclave at 140 degrees C or under normal pressure at 90 degrees C. Colloidal solutions of CdSe/CdS core-shell nanocrystals exhibit a photoluminescence quantum yield (PL QY) up to 42% relative to coumarin 6 at room temperature.

Novel prefractionation method can be used in proteomic analysis

For the first time, a novel prefractionation method used in proteomic analysis was developed, which is performed by a novel aqueous two-phase system (NATPS) composed of n-butanol, (NH4)(2)SO4, and water. It can separate proteomic proteins into multigroups by one-step extraction. The phase-separation conditions of n-butanol solutions were studied in the presence of commonly used inorganic salts. The NATPS was subsequently developed. Using human serum albumin, zein, and gamma-globulin as model proteins, the separation effectiveness of the NATPS for protein was studied under affection factors, i.e., pH, n-butanol volume, protein, or salt concentration. The model and actual protein samples were separated by the NATPS and then directly used for gel electrophoresis without separating the target proteins from phase-forming reagents. It revealed that the NATPS could separate proteomic proteins into multigroups by one-step extraction. The NATPS has the advantages of rapidity, simplicity, low cost, biocompability, and high efficiency. It need not separate target proteins from the phase-forming reagents. The NATPS has great significance in separation and extraction of proteomic proteins, as well as in methodology.

Semiconductor "nano-onions" with multifold alternating CdS/CdSe or CdSe/CdS structure

"Nano-onions" with multifold alternating CdS/CdSe or CdSe/CdS structure have been synthesized via a two-phase approach. The influences of shell on photoluminescence (PL) quantum yields (QYs) and PL lifetimes are investigated and discussed. It is found that the outmost shell plays an important role in the PL QYs and PL lifetimes of the multishells "onion-like" nanocrystals. The PL QYs and PL lifetimes fluctuate regularly with CdSe and CdS shells. The PL QY increases when the nanocrystals have an outmost CdS shell; however, it decreases dramatically with the outmost CdSe shell. The trend of the change of PL lifetimes is consistent with that of the QYs. The crystal structure and composition of the novel nano-onions are characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectra techniques.