Effect of axial loads on implanted-supported partial fixed prostheses by strain gauge analysis

Objectives: The present study used strain gauge analysis to perform an in vitro evaluation of the effect of axial loading on 3 elements of implant-supported partial fixed prostheses, varying the type of prosthetic cylinder and the loading points. Material and methods: Three internal hexagon implants were linearly embedded in a polyurethane block. Microunit abutments were connected to the implants applying a torque of 20 Ncm, and prefabricated Co-Cr cylinders and plastic prosthetic cylinders were screwed onto the abutments, which received standard patterns cast in Co-Cr alloy (n=5). Four strain gauges (SG) were bonded onto the surface of the block tangentially to the implants, SG 01 mesially to implant 1, SG 02 and SG 03 mesially and distally to implant 2, respectively, and SG 04 distally to implant 3. Each metallic structure was screwed onto the abutments with a 10 Ncm torque and an axial load of 30 kg was applied at five predetermined points (A, B, C, D, E). The data obtained from the strain gauge analyses were analyzed statistically by RM ANOVA and Tukey's test, with a level of significance of p<0.05. Results: There was a significant difference for the loading point (p=0.0001), with point B generating the smallest microdeformation (239.49 mu epsilon) and point D the highest (442.77 mu epsilon). No significant difference was found for the cylinder type (p=0.748). Conclusions: It was concluded that the type of cylinder did not affect in the magnitude of microdeformation, but the axial loading location influenced this magnitude.

Straight and Offset Implant Placement under Axial and Nonaxial Loads in Implant-Supported Prostheses: Strain Gauge Analysis

Purpose: The aim of this in vitro study was to quantify strain development during axial and nonaxial loading using strain gauge analysis for three-element implant-supported FPDs, varying the arrangement of implants: straight line (L) and offset (O). Materials and Methods: Three Morse taper implants arranged in a straight line and three implants arranged in an offset configuration were inserted into two polyurethane blocks. Microunit abutments were screwed onto the implants, applying a 20 Ncm torque. Plastic copings were screwed onto the abutments, which received standard wax patterns cast in Co-Cr alloy (n = 10). Four strain gauges were bonded onto the surface of each block tangential to the implants. The occlusal screws of the superstructure were tightened onto microunit abutments using 10 Ncm and then axial and nonaxial loading of 30 Kg was applied for 10 seconds on the center of each implant and at 1 and 2 mm from the implants, totaling nine load application points. The microdeformations determined at the nine points were recorded by four strain gauges, and the same procedure was performed for all of the frameworks. Three loadings were made per load application point. The magnitude of microstrain on each strain gauge was recorded in units of microstrain (mu). The data were analyzed statistically by two-way ANOVA and Tukey's test (p < 0.05). Results: The configuration factor was statistically significant (p= 0.0004), but the load factor (p= 0.2420) and the interaction between the two factors were not significant (p= 0.5494). Tukey's test revealed differences between axial offset (mu) (183.2 +/- 93.64) and axial straight line (285.3 +/- 61.04) and differences between nonaxial 1 mm offset (201.0 +/- 50.24) and nonaxial 1 mm straight line (315.8 +/- 59.28). Conclusion: There was evidence that offset placement is capable of reducing the strain around an implant. In addition, the type of loading, axial force or nonaxial, did not have an influence until 2 mm.

How the interplay between individual spatial memory and landscape persistence can generate population distribution patterns

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapping soil pollution by spatial analysis and fuzzy classification

Spatial analysis and fuzzy classification techniques were used to estimate the spatial distributions of heavy metals in soil. The work was applied to soils in a coastal region that is characterized by intense urban occupation and large numbers of different industries. Concentrations of heavy metals were determined using geostatistical techniques and classes of risk were defined using fuzzy classification. The resulting prediction mappings identify the locations of high concentrations of Pb, Zn, Ni, and Cu in topsoils of the study area. The maps show that areas of high pollution of Ni and Cu are located at the northeast, where there is a predominance of industrial and agricultural activities; Pb and Zn also occur in high concentrations in the northeast, but the maps also show significant concentrations of Pb and Zn in other areas, mainly in the central and southeastern parts, where there are urban leisure activities and trade centers. Maps were also prepared showing levels of pollution risk. These maps show that (1) Cu presents a large pollution risk in the north-northwest, midwest, and southeast sectors, (2) Pb represents a moderate risk in most areas, (3) Zn generally exhibits low risk, and (4) Ni represents either low risk or no risk in the studied area. This study shows that combining geostatistics with fuzzy theory can provide results that offer insight into risk assessment for environmental pollution.

Identification of Landslide Scars in the Region of the Serra do Mar, São Paulo State, Brazil, Using Digital Image Processing and Spatial Analysis Tools

The objective of the present study, developed in a mountainous region in Brazil where many landslides occur, is to present a method for detecting landslide scars that couples image processing techniques with spatial analysis tools. An IKONOS image was initially segmented, and then classified through a Batthacharrya classifier, with an acceptance limit of 99%, resulting in 216 polygons identified with a spectral response similar to landslide scars. After making use of some spatial analysis tools that took into account a susceptibility map, a map of local drainage channels and highways, and the maximum expected size of scars in the study area, some features misinterpreted as scars were excluded. The 43 resulting features were then compared with visually interpreted landslide scars and field observations. The proposed method can be reproduced and enhanced by adding filtering criteria and was able to find new scars on the image, with a final error rate of 2.3%.

Seasonal and spatial species richness variation of dung beetle (Coleoptera, Scarabaeidae s. str.) in the Atlantic Forest of southeastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Spatial and linear correlations between soil and corn

O conjunto de tecnologias aplicadas ao sistema de produção agrícola tem como características principais a verticalização da produtividade, diminuição de custos, melhoria nas características físicas, químicas e biológicas do solo para proporcionarem o crescimento sustentável do meio de produção. Desta forma, o trabalho teve como objetivo determinar a variabilidade e as correlações lineares e especiais entre os atributos da planta e do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para produção de forragem. No ano agrícola de 2006, na Fazenda Bonança, município de Pereira Barreto (SP), foram analisados a produtividade de forragem do milho outonal (FDM) em sistema plantio direto irrigado e os atributos físicos do solo, num Latossolo Vermelho distrófico. O objetivo foi estudar a variabilidade e as correlações lineares e espaciais entre os atributos da planta e os do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para a produtividade da forragem. Foi instalada a malha geoestatística, para coleta de dados do solo e planta, contendo 125 pontos amostrais, numa área de 2.500 m². Os atributos estudados, além de não terem variado aleatoriamente, apresentaram variabilidade dos dados entre baixa e muito alta e seguiram padrões espaciais bem definidos, com alcances entre 7,8 e 38,0 m. Por outro lado, a correlação linear entre os atributos da planta com o do solo foi baixa e extremamente significativa. Os pares Massa Seca de forragem versus Microporosidade e Diâmetro do colmo versus Densidade do Solo foram melhor correlacionados na camada de 0-0.10m, enquanto os outros pares - Massa Seca de Forragem versus Macroporosidade - e Porosidade Total - apresentaram correlação inversa para a mesma camada. Entretanto, do ponto de vista espacial, houve uma alta correlação inversa entre Massa Seca de Forragem com Microporosidade, de modo que a microporosidade na camada de 0-0.10m pode ser considerada um bom indicador de qualidade física do solo, tendo em vista a produção de forragem de milho.

Simulação geoestatística na caracterização espacial de óxidos de ferro em diferentes pedoformas

Os minerais da fração argila, goethita e hematita, são óxidos de ferro (Fe) indicadores pedoambientais com grande influência nos atributos físicos e químicos do solo. O conhecimento dos padrões espaciais desses óxidos auxilia a compreensão das interrelações de causa e efeito com os atributos do solo. Nesse sentido, a qualidade das estimativas espaciais produzidas pode alterar os resultados obtidos e, por consequência, as interpretações dos padrões espaciais obtidos. O presente estudo teve o objetivo de avaliar o desempenho dos métodos geoestatísticos de estimativas (KO) e simulações sequenciais gaussianas (SSG) na caracterização espacial de teores de óxidos de Fe, goethita (Gt) e hematita (Hm), em uma pedoforma côncava e outra convexa. Foram coletadas 121 amostras de solos em cada pedoforma de um Argissolo em pontos com espaçamentos regulares de 10 m. Os teores de óxidos de Fe foram obtidos por meio de difração de raios-X. Os dados foram submetidos a análises geoestatísticas por meio da modelagem do variograma e posterior interpolação por KO e SSG. A KO não refletiu a verdadeira variabilidade dos óxidos de Fe, hematita e goethita, demonstrando ser inapropriada para a caracterização espacial dos teores dos óxidos de Fe. Assim, o uso da SSG é preferível à krigagem quando a manutenção dos altos e baixos valores nas estimativas espaciais é necessária. O desempenho dos métodos geoestatísticos foi influenciado pelas pedoformas. Os mapas E-type devem ser recomendados em vez de mapas de KO para os óxidos de Fe, por serem ricos em detalhes e práticos na definição de zonas homogêneas para o manejo localizado em frente de KO, sobretudo em pedoforma côncava.

Spatial distribution of dengue in the city of Cruzeiro, São Paulo State, Brazil: use of geoprocessing tools

Este artigo tem por objetivo identificar padrões na distribuição espacial dos casos de dengue ocorridos no município de Cruzeiro/SP, no ano de 2006. Trata-se de um estudo ecológico e exploratório que utiliza as ferramentas de análise espacial na elaboração de mapas temáticos, com dados obtidos do SinanNet. Foi feita uma análise por área, tomando-se como unidade o setor censitário do IBGE; a análise considerou quatro meses do ano de 2006 que mostra a ocorrência da doença no município. Os mapas temáticos foram construídos pelo programa computacional TerraView 3.3.1; assim como os valores dos índices de Moran Global (I M) mês a mês e o estimador de Kernel. Foram georreferenciados 691 casos de dengue (taxa de 864,2 casos/100.000 habitantes); os Índices de Moran e p-valores obtidos foram I M = 0,080 (março) p = 0,11; I M = 0,285 (abril) p = 0,01; I M = 0,201 (maio) p = 0,01 e I M = 0,002 (junho) p = 0,57. Os primeiros casos foram identificados na região nordeste e central e os últimos casos, na região norte, nordeste e central. Foi possível identificar os setores censitários onde a epidemia teve início e como ocorreu têmporo-espacialmente no município.

Spatial patterns or trees in the Picinguara coastal sandy forest (state of Sao-Paulo, Brazil)

The species of the sandy plains forests (forests of the ''restingas'') have not yet had their spatial patterns studied as aids to the understanding of the diversity found in the different physiognomies along the Brazilian coast. In this paper a 10 x 10 m quadrat framework laid in a hectare of a tree dominant forest in the sandy plains of the Picinguaba area of the Serra do Mar State Park (municipality of Ubatuba, state of São Paulo, Brazil) was used to assess the spatial pattern of distribution for the ten most important species : Pera glabrata, Euterpe edulis, Eugenia brasiliensis, Alchornea triplinervea, Guatteria australis, Myrcia racemosa, Jacaranda semiserrata, Guarea macrophylla, Euplassa cantareirae and Nectandra oppositifolia. The spatial patterns were inferred through the calculations of their T-Square Index (C) and Dispersal Distance Index (I). P. glabrata shows a random pattern, E. edulis aggregate, E. brasiliensis, A. triplinervia, G. australis, E. cantareirae and N. oppositifolia with a tendency between aggregate and uniform and, M. racemosa, J. semiserrata and G. macrophylla between aggregate and random. Although the indexes are dependent of the sample size and of the technique adjustments, the relationship of the pattern with the environmental factors is shown by clustering methods. The results give confirmation of how the spatial patterns bring associations between populations and shape of the vegetation physiognomy.

Strong and fast phase modulation for quantitative analysis of photorefractive gratings

A new approach for studying photorefractive gratings in two-wave mixing experiments by a phase modulation technique is presented. The introduction of a large-amplitude, high-frequency sinusoidal phase modulation in one of the input beams blurs the interference pattern and provides powerful harmonic signals for accurate measurements of the grating diffraction efficiency eta and the output phase shift rho between the transmitted and diffracted waves. The blurring of the light fringes can be used to suppress the higher spatial harmonics of the grating, allowing a space-charge field with sinusoidal profile to be recorded. Although the presence of such a strong phase modulation affects the beam coupling in a rather complicated way, it is shown that for the special case of equal intensity input beams, the effect of the phase modulation on eta and rho is reduced to a weakening of the coupling strength. The potentialities of the technique are illustrated in a study of refractive-index waves excited by running interference patterns in a Bi12TiO20 crystal. Expressions for the diffraction efficiency and the output phase shift are derived and used to match numerically calculated curves to the experimental data. The theoretical model is supported by the very good data fitting and allows the computation of important material parameters.

SPATIAL AUTOCORRELATION OF MORPHOMETRIC VARIATION IN LUTOSA-BRASILIENSIS (BRUNNER VONWATTENWYL, 1888) (ORTHOPTERA, GRYLLACRIDOIDEA, HENICIDAE)

Geographic differentiation and sexual dimorphism in eighteen morphometric characters of Lutosa brasiliensis (Orthoptera: Henicidae) collected in eight localities of the State of São Paulo (Brazil) were analysed. A two-way Multivariate Analysis of Variance (MONOVA) was used to assess simultaneously the effects of sex and geographic location (plus their interaction) on morphometric variability. The spatial patterns of variation were analysed by Factor and Spatial Autocorrelation Analyses (Moran's I coefficient in four distance classes). Both indicate that the main direction of variation is, for males and females, a north-south cline in overall body size. In females, however, ovipositor length is not correlated with overall body size and displays a different pattern of variation over geographic space, indicating that distinct evolutionary forces produced the geographic differentiation in the species.

HIERARCHICAL VERSUS NONHIERARCHICAL PATTERNS OF GENETIC DISTANCES AMONG POPULATIONS - A SIMULATION STUDY

A simulation study was made of the effects of mixing two evolutionary forces (natural selection and random genetic drift), combined in a single data matrix of gene frequencies, on the resulting genetic distances among populations. Twenty-one, kinds of simulated gene frequencies surfaces, for 15 populations linearly distributed over geographic space, were used to construct 21 data matrices, combining different proportions of two types of surfaces (gradients and random surfaces). These matrices were analysed by Unweighted Pair-Group Method - Arithmetic Averages (UPGMA), clustering and Principal Coordinate Analysis. The results obtained show that ordination is more accurate than UPGMA in revealing the spatial patterns in the genetic distances, in comparison with results obtained using the Mantel test comparing directly genetic and geographic distances.

Spatial and temporal variability of soil CO2 emission in a sugarcane area under green and slash-and-burn managements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Foraging, diet and community structure in an epigaeic ant (Hymenoptera: Formicidae) assemblage: the role of recruitment

The significance of recruitment systems for community structure of epigaeic ants in a tropical upland forest in southern Brazil was evaluated by examining patterns of spatial occurrence at fixed points. Normal exploratory activity was evaluated with pitfall traps, while the effect of recruitment and diet was evaluated by using honey and sardine baits at the same points. Through techniques developed for environmental impact assessment, the significance of recruitment was evaluated following perturbation, or the placement of bait. Of the 46 species encountered, 15 were sufficiently frequent to study. Of these, only 6 showed significant spatial frequency changes at baits when compared with pitfall trap collections. In one analysis, monthly differences were important for a few smaller species, suggesting thermic limitations, while bait types either increased or decreased spatial point usage. The magnitude of spatial point variation is an index for the strength of recruitment in community organization. Bait types suggest nutritional possibilities of each species. Both recruitment and diet are probably functions of the species composition of the ant community.