A modelling approach for coupling numerical analytical techniques applied in microsystems

In this paper, a method for the integration of several numerical analytical techniques that are used in microsystems design and failure analysis is presented. The analytical techniques are categorized into four groups in the discussion, namely the high-fidelity analytical tools, i.e. finite element (FE) method, the fast analytical tools referring to reduced order modeling (ROM); the optimization tools, and probability based analytical tools. The characteristics of these four tools are investigated. The interactions between the four tools are discussed and a methodology for the coupling of these four tools is offered. This methodology consists of three stages, namely reduced order modeling, deterministic optimization and probabilistic optimization. Using this methodology, a case study for optimization of a solder joint is conducted. It is shown that these analysis techniques have mutual relationship of interaction and complementation. Synthetic application of these techniques can fully utilize the advantages of these techniques and satisfy various design requirements. The case study shows that the coupling method of different tools provided by this paper is effective and efficient and it is highly relevant in the design and reliability analysis of microsystems

Turbulence model performance in continuous casting simulations

This paper concerns the development and validation (using an oil/water system) of a finite volume computer model of the continuous casting process for steel flat products. The emphasis is on hydrodynamic aspects and in particular the dynamic behaviour of the metal/slag interface. Instability and wave action encourage the entrainment of inclusions into the melt affecting product quality. To track the interface between oil and water a new implicit algorithm was developed, called the Counter Diffusion Method. To prevent excessive damping, a time-filtered version of the k-e model, was found necessary, with appropriate density stratification terms representing interface turbulence damping.

The effects of thermo-electrically induced convection in alloy solidification

The effects of a constant uniform magnetic field on thermoelectric currents during dendritic solidification were investigated using a 2-dimensional enthalpy based numerical model. Using an approximation of the dendrite growing in free space it was found that the resulting Lorentz force generates a circulating flow influencing the solidification pattern. As the magnetic field strength increases it was found that secondary growth on the clockwise side of the primary arm of the dendrite was encouraged, while the anticlockwise side is suppressed due to a reduction in local free energy. The preferred direction of growth rotated in the clockwise sense under an anti-clockwise flow for both the binary alloy and pure material. The tip velociy is significantly increased compared to growth in stagnant flow. This is due to a small recirculation that follows the tip of the dendrite; bringing in colder liquid and lower concentrations of solute. The recirculation being not normally incident on the tip is most likely the cause for the rotation. Grain growth consisting of multiple seeds with the same anisotropy growing in the same plane, gives a competition to release latent heat resulting in stunted growth. The initial growth for each dendrite is very similar to the single seed cases indicating that dendrites must become before the thermoelectric interactions are significant.

Optimizing the reliability of power electronics module isolation substrates

Optimal design of a power electronics module isolation substrate is assessed using a combination of finite element structural mechanics analysis and response surface optimisation technique. Primary failure modes in power electronics modules include the loss of structural integrity in the ceramic substrate materials due to stresses induced through thermal cycling. Analysis of the influence of ceramic substrate design parameters is undertaken using a design of experiments approach. Finite element analysis is used to determine the stress distribution for each design, and the results are used to construct a quadratic response surface function. A particle swarm optimisation algorithm is then used to determine the optimal substrate design. Analysis of response surface function gradients is used to perform sensitivity analysis and develop isolation substrate design rules. The influence of design uncertainties introduced through manufacturing tolerances is assessed using a Monte-Carlo algorithm, resulting in a stress distribution histogram. The probability of failure caused by the violation of design constraints has been analyzed. Six geometric design parameters are considered in this work and the most important design parameters have been identified. Overall analysis results can be used to enhance the design and reliability of the component.

Uncertainty analysis to minimise risk in designing micro-electronics manufacturing processes

A design methodology based on numerical modelling, integrated with optimisation techniques and statistical methods, to aid the process control of micro and nano-electronics based manufacturing processes is presented in this paper. The design methodology is demonstrated for a micro-machining process called Focused Ion Beam (FIB). This process has been modelled to help understand how a pre-defined geometry of micro- and nano- structures can be achieved using this technology. The process performance is characterised on the basis of developed Reduced Order Models (ROM) and are generated using results from a mathematical model of the Focused Ion Beam and Design of Experiment (DoE) methods. Two ion beam sources, Argon and Gallium ions, have been used to compare and quantify the process variable uncertainties that can be observed during the milling process. The evaluations of the process performance takes into account the uncertainties and variations of the process variables and are used to identify their impact on the reliability and quality of the fabricated structure. An optimisation based design task is to identify the optimal process conditions, by varying the process variables, so that certain quality objectives and requirements are achieved and imposed constraints are satisfied. The software tools used and developed to demonstrate the design methodology are also presented.

Optimisation methodology for risk mitigation in advanced micro-system electronics manufacturing

This paper presents a design methodology based on numerical modelling, integrated with optimisation techniques and statistical methods, to aid the development of new advanced technologies in the area of micro and nano systems. The design methodology is demonstrated for a micro-machining process called Focused Ion Beam (FIB). This process has been modelled to provide knowledge of how a pre-defined geometry can be achieved through this direct milling. The geometry characterisation is obtained using a Reduced Order Models (ROM), generated from the results of a mathematical model of the Focused Ion Beam, and Design of Experiment (DoE) methods. In this work, the focus is on the design flow methodology which includes an approach on how to include process parameter uncertainties into the process optimisation modelling framework. A discussion on the impact of the process parameters, and their variations, on the quality and performance of the fabricated structure is also presented. The design task is to identify the optimal process conditions, by altering the process parameters, so that certain reliability and confidence of the application is achieved and the imposed constraints are satisfied. The software tools used and developed to demonstrate the design methodology are also presented.

Concise introduction to image processing using C++

A Concise Intro to Image Processing using C++ presents state-of-the-art image processing methodology, including current industrial practices for image compression, image de-noising methods based on partial differential equations, and new image compression methods such as fractal image compression and wavelet compression. It includes elementary concepts of image processing and related fundamental tools with coding examples as well as exercises. With a particular emphasis on illustrating fractal and wavelet compression algorithms, the text covers image segmentation, object recognition, and morphology. An accompanying CD-ROM contains code for all algorithms.

The effects of cadence and power output upon physiological and biomechanical responses to incremental arm-crank ergometry

The aim of this study was to examine the effects of cadence and power output on physiological and biomechanical responses to incremental arm-crank ergometry (ACE). Ten male subjects (mean +/- SD age, 30.4 +/-5.4 y; height, 1.78 +/-0.07 m; mass, 86.1 +/-14.2 kg) undertook 3 incremental ACE protocols to determine peak oxygen uptake (VO2 peak; mean of 3 tests: 3.07 +/- 0.17 L.min-1) at randomly assigned cadences of 50, 70, or 90 r.min-1. Heart rate and expired air were continually monitored. Central (RPE-C) and local (RPE-L) ratings of perceived exertion were recorded at volitional exhaustion. Joint angles and trunk rotation were analysed during each exercise stage. During submaximal power outputs of 50, 70, and 90 W, oxygen consumption (VO2) was lowest for 50 r.min-1 and highest for 90 r.min-1 (p < 0.01). VO2 peak was lowest during 50 r.min-1 (2.79 +/-0.45 L.min-1; p < 0.05) when compared with both 70 r.min-1 and 90 r.min-1 (3.16 +/-0.58, 3.24 +/-0.49 L.min-1, respectively; p > 0.05). The difference between RPE-L and RPE-C at volitional exhaustion was greatest during 50 r.min-1 (2.9 +/- 1.6) when compared with 90 r.min-1 (0.9 +/- 1.9, p < 0.05). At VO2 peak, shoulder range of motion (ROM) and trunk rotation were greater for 50 and 70 r.min-1 when compared with 90 r.min-1 (p < 0.05). During submaximal power outputs, shoulder angle and trunk rotation were greatest at 50 r.min-1 when compared with 90 r.min-1 (p < 0.05). VO2 was inversely related to both trunk rotation and shoulder ROM during submaximal power outputs. The results of this study suggest that the greater forces required at lower cadences to produce a given power output resulted in greater joint angles and range of shoulder and trunk movement. Greater isometric contractions for torso stabilization and increased cost of breathing possibly from respiratory-locomotor coupling may have contributed increased oxygen consumption at higher cadences.

Identifying species and ecosystem sensitivities.

Executive Summary The programme of work was commissioned in September 1998 to supply information to underpin the UK’s commitments to protection and conservation of the ecosystems and biodiversity of the marine environment under the 1992 OSPAR Convention on the Protection of the Marine Environment of the North East Atlantic. The programme also provided support for the implementation of the Biodiversity Convention and the EU Habitats Directive. The MarLIN programme initiated a new approach to assessing sensitivity and recoverability characteristics of seabed species and biotopes based on structures (such as the seabed biotopes classification) and criteria (such as for assessing rarity and defining ‘sensitivity’) developed since 1997. It also developed tools to disseminate the information on the Internet. The species researched were those that were listed in conventions and directives, included in Biodiversity Action Plans, or were nationally rare or scarce. In addition, species were researched if they maintained community composition or structure and/or provided a distinctive habitat or were special to or especially abundant in a particular situation or biotope At its conclusion in August 2001, the work carried out under the contract with DETR/DEFRA had: · Developed protocols, criteria and structures for identifying ‘sensitivity’ and ‘recoverability’, which were tested by a programme management group. · Developed a database to hold research data on biology and sensitivity of species and biotopes. · Defined the link between human activities and the environmental factors likely to be affected by those activities. · Developed a user-friendly Web site to access information from the database, on the sensitivity and recoverability characteristics of over 100 species and basic information on over 200 species. Additionally, the project team have: · Brought together and facilitated discussion between current developers and users of electronic resources for environmental management, protection and education in the conference ‘Using Marine Biological Information in the Electronic Age’ (19-21 July 1999). · Contributed to the development of Ecological Quality Objectives for the North Sea (Scheveningen, 11- 3 September 1999 and subsequent papers). · Provided detailed information on species as a supplement to the National Biodiversity Network Gateway demonstration www.searchnbn.net. · Developed a peer-reviewed approach to electronic publication of updateable information. · Promoted the contract results and the MarLIN approach to the support of marine environmental management and protection at European research fora and, through the web site, internationally. The information available through the Web site is now being used by consultants and Government agencies. The DEFRA contract has been of critical importance in establishing the Marine Life Information Network (MarLIN) programme and has encouraged support from other organisations. Other related work in the MarLIN programme is on-going, especially to identify sensitivity of biotopes to support management of SACs (contract from English Nature in collaboration with Scottish Natural Heritage), to access data sources (in collaboration with the National Biodiversity Network) and to establish volunteer recording schemes for marine life. The results of the programme are best viewed on the Web site (www.marlin.ac.uk). Three reports have been produced during the project. A final report detailing the work undertaken, a brochure ‘Identifying the sensitivity of seabed ecosystems’ and a CD-ROM describing the programme and demonstrating the Web site have been delivered as final products in addition to the Web site.

Instrumentos de evaluación utilizados en la formación inicial del profesorado y su coherencia para el desarrollo de competencias profesionales en los estudiantes: visión del alumnado, egresados y profesorado

El objetivo de este trabajo es analizar la frecuencia con que se utilizan diferentes instrumentos y procedimientos de evaluación desde el punto de vista del profesorado, del alumnado y de los egresados en la formación inicial de maestros y profesores especialistas en Educación Física, así como el grado de coherencia –relación- percibido por cada uno de esos grupos implicados entre dichos instrumentos y procedimientos de evaluación y el desarrollo de las competencias profesionales que se pretende adquieran los estudiantes. La muestra objeto de estudio está compuesta por 199 alumnos, 67 egresados y 53 profesores de las titulaciones de Magisterio (especialidad de Educación Física) y Ciencias de la Actividad Física y el Deporte de las universidades de Valladolid, Salamanca y León. Los resultados muestran una clara discrepancia entre los distintos grupos analizados, tanto en lo referido al tipo de instrumentos de evaluación utilizados, como en la valoración del grado de coherencia entre estos y el desarrollo de las competencias profesionales de los futuros maestros.

Paul Karl Feyerabend Las proyecciones de la proliferación teórica en la relación ciencia-metafísica

La doctrina de la Proliferación teórica de Paul Karl Feyerabend ha sido interpretada por sus especialistas como un intento de salvaguardar el ideal del progreso científico. Aunque tales estudios hacen justicia, en parte, a la intencionalidad de nuestro filósofo no explicitan la crítica fundamental que implica para Feyerabend el pluralismo teórico. La proliferación teórica constituye en sí misma una reductio ad absurdum de los distintos intentos del positivismo lógico y del racionalismo crítico por definir la ciencia a expensas de lo metafísico. Este artículo presenta la proliferación teórica como una reivindicación del papel positivo que ocupa la metafísica en el quehacer científico. Se consigna la defensa que hace Feyerabend de la metafísica en cuanto que ésta constituye la posibilidad de superar el conservadurismo conceptual, aumentar de contenido empírico de la ciencia y recuperar el valor descriptivo de las teorías científicas.

An outpatient respiratory rehabilitation program:Findings from a community hospital

Objectives: To determine patient satisfaction with a community hospital's respiratory rehabilitation program and to assess changes in patient physical and emotional function and quality of life. Design: Pre- and post-program measures were made on a variety of physiological and psychosocial factors. A modified version of the Chronic Respiratory Disease Questionnaire was administered before and after the 8-week multidisciplinary and comprehensive respiratory rehabilitation program. The post-program questionnaire also included a number of service delivery and patient satisfaction and quality-of-life questions. Setting: Respiratory Rehabilitation Program at St. Joseph's Hospital, a community hospital in Brantford, Ont., in active partnership with the Brant County Lung Association. Brant County is located in Central West Ontario, and has both urban and rural areas and a population of approximately 125 000 people. Participants: Twenty-nine patients, with a diagnosis of moderate to severe chronic obstructive pulmonary disease (COPD) who were referred to the Fall 1997 and Spring 1998 programs, were enrolled in the study. Outcome measures: Changes in physical and emotional function, health knowledge, skills mastery, quality of life and satisfaction with the program. Results: Twenty-one of 29 patients completed the program. Statistically significant and clinically important improvements were found between all pre- and post-program evaluation scores (distance walked, fatigue, dyspnea, emotional function, skills mastery and health knowledge). Participants were very satisfied with the program and felt it improved their quality of life. Conclusion: The positive outcomes reported rom randomized controlled trials of respiratory rehabilitation programs can be achieved in a community hospital setting.