Statistical Model to DNA Melting

We explore a DNA statistical model to obtain information about the behavior of the thermodynamics quantities. Special attention is given to the thermal denaturation of this macromolecule.

Past, present and future - assessing changes in aquatic environments using subfossil diatoms

The deterioration of surface waters is one of the most important issues in the environmental management of the European Union. Thus, the EU Water Framework Directive 2000/60/EC (WFD) requires “good ecological and chemical status” of surface waters by 2015 allowing only a slight departure from ecological reference conditions characterized by the biological communities typical for the conditions of minimal anthropogenic impact. The WFD requires the determination of ecological reference conditions and the present ecological status of surface waters. To meet this legislative demand, sedimentary diatom assemblages were used in these studies with various methods 1) to assess natural and human activity induced environmental changes, 2) to characterize background conditions 3) to evaluate the present ecological status and 4) to predict the future of the water bodies in the light of palaeolimnological data. As the WFD refers to all surface waters, both coastal and inland sites were included. Two long and two short sediment cores from the Archipelago Sea in the northern Baltic Sea were examined for their siliceous microfossils in order to assess (1) the Holocene palaeoenvironmental history and (2) the recent eutrophication of the area. The diatom record was divided into local diatom assemblage zones (LDAZ, long cores) and diatom assemblage zones (DAZ, short cores). Locally weighted weighted averaging regression and calibration (LWWA) was applied for the quantitative reconstruction of past TN concentrations (short cores). An age model for the long cores was constructed by using independent palaeomagnetic and AMS-14C methods. The short cores were dated using radiometric (210Pb, 226Ra and 137Cs) methods. The long cores date back to the early history of the Archipelago Sea, which was freshwater – no salinity increase referable to the brackish phase of the Yoldia Sea is recognized. The nutrient status of the lacustrine phase was slightly higher in the Archipelago Sea than in the Baltic Proper. Initial brackish-water influence is observed at 8 150 ±80 cal. BP (LDAZ4), but fully brackish conditions were established at 7 700 ±80 cal. BP (LDAZ5). The diatom assemblages indicate increasing salinity, warming climate and possible eutrophic conditions during the lacustrine to brackish-water transition. The decreasing abundance of Pseudosolenia calcar-avis (Schultze) Sundström and the increasing abundance of the ice-cover indicator species Pauliella taeniata (Grunow) Round and Basson indicate decreasing salinity and climatic cooling after ca. 5 000 cal. BP. Signs of eutrophication are visible in the most recent diatom assemblage zones of both short cores. Diatom-inferred total nitrogen (DI-TN) reconstructions partially fail to trace the actual measured total nitrogen concentrations especially from the late 1980s to the mid 1990s. This is most likely due to the dominating diatom species Pauliella taeniata, Thalassiosira levanderi Van Goor and Fragilariopsis cylindrus (Grunow) W. Krieger being more influenced by factors such as the length of the ice-season rather than nutrient concentrations. It is concluded that the diatom assemblages of the study sites are principally governed by climate fluctuations, with a slight influence of eutrophication visible in the most recent sediments. There are indications that global warming, with reduced ice cover, could impact the spring blooming diatom species composition in the Archipelago Sea. In addition, increased sediment accumulation in the early 90s coincides with the short ice-seasons suggesting that warming climate with decreasing ice-cover may increase sedimentation in the study area. The diverse diatom assemblages dominated by benthic species (54 %) in DAZ1 in the Käldö Fjärd core can be taken as background diatom assemblages for the Archipelago Sea. Since then turbidity has increased and the diatom assemblages have been dominated by planktonic diatoms from around the mid 1800s onwards. The reconstructed reference conditions for the total nitrogen concentrations fluctuate around 400 μg l-1. Altogether two short sediment cores and eight short cores for top-bottom analysis were retrieved from Lake Orijärvi and Lake Määrjärvi to assess the impact of the acid mine drainage (AMD) derived metals from the Orijärvi mine tailings on the diatom communities of the lakes. The Cu (Pb, Zn) mine of Orijärvi (1757 – 1956) was the first one in Finland where flotation techniques (1911 – 1955) were used to enrich ore and large quantities of tailings were produced. The AMD derived metal impact to the lakes was found to be among the heaviest thus far recorded in Finland. Concentrations of Cu, Pb and Zn in Lake Orijärvi sediments are two to three orders of magnitude higher than background values. The metal inputs have affected Lake Orijärvi and Lake Määrjärvi diatom communities at the community levels through shifts in dominant taxa (both lakes) and at the individual level through alteration in frustule morphology (Lake Orijärvi). At present, lake water still has elevated heavy metal levels, indicating that the impact from the tailings area continues to affect both lakes. Lake Orijärvi diatom assemblages are completely dominated by benthic species and are lacking planktonic diatoms. In Lake Määrjärvi the proportion of benthic and tychoplanktonic diatoms has increased and the planktonic taxa have decreased in abundance. Achnanthidium minutissimum Kützing and Brachysira vitrea (Grun.) R. Ross in Hartley were the most tolerant species to increased metal concentrations. Planktonic diatoms are more sensitive to metal contamination than benthic taxa, especially species in the genus Cyclotella (Kützing) Brébisson. The ecological reference conditions assessed in this study for Lake Orijärvi and Lake Määrjärvi comprise diverse planktonic and benthic communitites typical of circumneutral oligotrophic lakes, where the planktonic diatoms belonging to genera Cyclotella , Aulacoseira Thwaites, Tabellaria Ehrenberg and Asterionella Hassall dominate in relative abundances up to ca. 70%. The benthic communities are more diverse than the planktonic consisting of diatoms belonging to the genera Achnanthes Bory, Fragilaria Lyngbye and Navicula St. Vincent. This study clearly demonstrates that palaeolimnological methods, especially diatom analysis, provide a powerful tool for the EU Water Frame Work Directive for defining reference conditions, natural variability and current status of surface waters. The top/bottom approach is a very useful tool in larger-scale studies needed for management purposes. This “before and after” type of sediment sampling method can provide a very time and cost effective assessment of ecological reference conditions of surface waters.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

RFID tekniikan käyttömahdollisuudet betonituoteteollisuuden varastonhallinnassa

Lujabetoni Oy:n kappaletavaran varastonhallinnassa on todettu paljon kehitettävää. Kappaletavaran varasto-otot eivät perustu todellisiin määriin, varastonkierto on hidasta, varastointi sitoo paljon pääomaa ja inventointi on työlästä. Tähän ongelmaan haetaan ratkaisua RFID –teknologiasta. Työn teoriaosassa on käsitelty RFID –teknologian teoriaa ja nykytilaa, sekä varastoinnin peruskäsitteitä ja varastonohjausmenetelmiä. Empiirisessä osassa on laadittu RFID –järjestelmän toteutussuunnitelma. Työn tuloksena on RFID –järjestelmän kuvaus sekä toteutussuunnitelma, joilla saavutetaan tavoitellut hyödyt. Työssä löydettiin menetelmät joilla komponentit voidaan luotettavasti tunnistaa, sekä suunniteltiin todellisiin tapahtumiin perustuva, automaattiset vastaanotto- ja varasto-otto –kirjaukset mahdollistava RFID –järjestelmä. Näiden ansiosta varastotyö ja varastoihin sitoutuva pääoma vähenevät, jolloin saavutetaan säästöjä varastointikustannuksissa.

Evaluation of the dioxin and furan formation thermodynamics in combustion processes of urban solid wastes

Specific combustion programs (Gaseq, Chemical equilibria in perfect gases, Chris Morley) are used to model dioxin and formation in the incineration processes of urban solid wastes. Thanks to these programs, it is possible to establish correlations with the formation mechanisms postulated in literature on the subject. It was found that minimum oxygen quantities are required to obtain a significant formation of these compounds and that more furans than dioxins are formed. Likewise, dioxin and furan formation is related to the presence of carbon monoxide, and dioxin and furan distribution among its different compounds depends on the chlorine and hydrogen relative composition. This is due to the fact that an increased chlorine availability leads to the formation of compounds bearing a higher chlorine concentration (penta-, hexa-, hepta-, and octachlorides), whereas an increased hydrogen availability leads to the formation of compounds bearing a lower chlorine number (mono, di-, tri-, and tetrachlorides).

Kuivurin pölynhallintajärjestelmä

Lämminilmakuivaus on viljan kuivaamisen menetelmistä ylivoimaisesti käytetyin. Siinä kuivurissa olevan viljakerroksen läpi puhalletaan lämmintä ilmaa, kunnes viljan kosteuspitoisuus laskee tavoitetasoon. Viljan jyvistä irtoaa aina pölyä niiden hangatessa toisiaan vasten. Viljankuivaamoiden pölyisyyttä on normaalisti pyritty vähentämään poistamalla leijuvaa pölyä viljan liikkeen epäjatkuvuuskohdista. Pölyä kulkeutuu kuitenkin kuivaamon ulkopuolelle myös kuivaukseen käytetyn ilman mukana. Poistoilman pölypitoisuus ei tavallisesti ole korkea, mutta kuivaamiseen käytetyistä suurista ilmamääristä johtuen pölyä voi kertyä poistoilmakanavan ympäristöön huomattavia määriä. Tämän diplomityön tavoitteena onkin viljankuivurin poistoilman pölypitoisuuden vähentämiseen soveltuvan pölynhallintajärjestelmän kehittäminen. Selvityksessä tarkasteltiin ensinnäkin kuivurin poistoilman pölypitoisuuteen liittyvää kansallista ja kansainvälistä lainsäädäntöä sekä raja-arvoja. Lähdemateriaalin perusteella kartoitettiin pölypitoisuuden vähentämiseen soveltuvia menetelmiä sekä kilpailijoiden toteuttamia ratkaisuja. Myös muita pölynhallintajärjestelmän edellytyksiä selvitettiin. Teoreettisessa tarkastelussa teknistaloudellisesti parhaaksi osoittautunut pölynhallintaratkaisu jalostettiin prototyypiksi. Sen toimintakykyä testattiin erotustehokkuuden mittaamiseen soveltuvan koelaitteiston avulla. Testitulosten perusteella kyseinen pölynhallintajärjestelmä todettiin toimivaksi ja pienellä jatkokehittelyllä myös kaupalliseen käyttöön soveltuvaksi. Testitulosten hyödyntämismahdollisuuksien lisäksi diplomityössä esitetään myös muutamia jatkokehitysehdotuksia.

Numerical Investigation of Flow Past a Circular Cylinder and in a Staggered Tube Bundle Using Various Turbulence Models

Transitional flow past a three-dimensional circular cylinder is a widely studied phenomenon since this problem is of interest with respect to many technical applications. In the present work, the numerical simulation of flow past a circular cylinder, performed by using a commercial CFD code (ANSYS Fluent 12.1) with large eddy simulation (LES) and RANS (κ - ε and Shear-Stress Transport (SST) κ - ω! model) approaches. The turbulent flow for ReD = 1000 & 3900 is simulated to investigate the force coefficient, Strouhal number, flow separation angle, pressure distribution on cylinder and the complex three dimensional vortex shedding of the cylinder wake region. The numerical results extracted from these simulations have good agreement with the experimental data (Zdravkovich, 1997). Moreover, grid refinement and time-step influence have been examined. Numerical calculations of turbulent cross-flow in a staggered tube bundle continues to attract interest due to its importance in the engineering application as well as the fact that this complex flow represents a challenging problem for CFD. In the present work a time dependent simulation using κ – ε, κ - ω! and SST models are performed in two dimensional for a subcritical flow through a staggered tube bundle. The predicted turbulence statistics (mean and r.m.s velocities) have good agreement with the experimental data (S. Balabani, 1996). Turbulent quantities such as turbulent kinetic energy and dissipation rate are predicted using RANS models and compared with each other. The sensitivity of grid and time-step size have been analyzed. Model constants sensitivity study have been carried out by adopting κ – ε model. It has been observed that model constants are very sensitive to turbulence statistics and turbulent quantities.

Effect of the concentration of inoculum and tensoactive on the efficiency of Bipolaris sorokiniana infection in wheat leaves

Techniques that result in increased pathogen infection rates by employing reduced quantities of fungal spores with sparse sporulation have been developed. Experiments under controlled environment conditions were conducted to evaluate the effect of the density of Bipolaris sorokiniana conidia on the intensity of wheat helminthosporiosis. Using a selected inoculum density, the concentration of the tensoactive (Tween 20) that promoted maximum infection by the causal agent of the disease was determined. The density of lesions and the estimated severity of the disease were quantified. The selected inoculum density was 1.5 x 10(4) spores.mL-1 plus 480 µL tensoactive.L-1 water, resulting in a disease severity that allows selecting wheat cultivars resistant to B. sorokiniana.

Tulologistiikan kustannusanalyysi hankintojen näkökulmasta

Työssä tarkastellaan tulologistiikan toiminnoista syntyvien kustannuksien ja hankintatoimen päätösten välistä yhteyttä. Päätökset tilauseräkooista ja hankintalähteistä vaikuttavat kustannuksiin, joita tavaran käsittelystä syntyy. Oletuksena hankintatilanteissa ei yksin voi olla, että ostohinnaltaan halvin tuote olisi aina kaikkein edullisin vaihtoehto. Työssä on käyty läpi Wurth Oy:n tulologistiikan eri toimintoja ja määritelty näille kustannukset toimintoperusteisen kustannuslaskennan periaatteita noudattaen. Työn lopussa on myös hahmotettu sitä kokonaisuutta, josta tuotteen kustannukset muodostuvat. Työn lopputulos on laskentamalli, jolla tulologistiikan kustannukset voidaan huomioida hankinnan yhteydessä osana kokonaiskustannuksia. Yhteenvetona tuloksista voimme todeta, että logistiikan kustannukset eivät ole tuotetasolla mitenkään merkityksettömiä. Varsinkin pienten erien käsittely on kallista ja pakkaaminen itse aiheuttaa aina lisäkustannuksia.

Huoltovarmuuskeskeinen varaosavaraston suunnittelututkimus

Tämän diplomityön päätavoitteena on ollut kunnossapidon kohteiden varaosien hallintaan soveltuvan laskentamallin kehittäminen ja sen tutkiminen valitussa case-kohteessa. Laskentamallissa on kartoitettu huoltovarmuuskeskeisen varastonhallinnan kannalta ne minimitiedot, joiden avulla voidaan olemassa olevat niukat lähtötiedot huomioiden tarkastella varastointikustannuksiin ja varaosien puuteriskiin liittyvää varastointiproblematiikkaa päätöksenteon tueksi. Laskentamalli voidaan jakaa kustannuskomponentteihin, jotka ovat varaosiin sitoutuneet pääomakustannukset, varaosien varastoimisesta aiheutuvat varastointikustannukset ja varaosan puutteesta laitteen vikaantuessa aiheutuvat tuotannon menetyksen kustannukset. Tämän mallin avulla on tarkoitus löytää varaosanimikkeille sopivat tilauspisteet sekä ostoeräkoot osan puutteesta aiheutuva riskikustannus huomioiden. Tämän työn tutkimusosiossa selvitettiin laskentamallin soveltuvuus ABB Oy Servicen huoltopalveluliiketoiminnan tukemiseen eri kunnossapitokohteissa. Teorioiksi mallin luomiseen määriteltiin todennäköisyyslaskentaan perustuva Poisson-jakauma varaosavaraston palveluasteen määrittämiseksi kulutustiedon / vikataajuuden perusteella sekä EOQ taloudellisen ostoeräkoon laskemiseksi.

Landscape structure in the northern coast of Paraná state, a hotspot for the brazilian Atlantic Forest conservation

The "Serra do Mar" region comprises the largest remnant of the Brazilian Atlantic Forest. The coast of the Paraná State is part of the core area of the "Serra do Mar" corridor and where actions for biodiversity conservation must be planned. In this study we aimed at characterizing the landscape structure in the APA-Guaraqueçaba, the largest protected area in this region, in order to assist environmental policies of this region. Based on a supervised classification of a mosaic of LANDSAT-5-TM satellite images (from March 2009), we developed a map (1:75,000 scale) with seven classes of land use and land cover and analyzed the relative quantities of forests and modified areas in slopes and lowlands. The APA-Guaraqueçaba is comprised mainly by the Dense Ombrophilous Forest (68.6% of total area) and secondary forests (9.1%), indicating a forested landscape matrix; anthropogenic and bare soil areas (0.8%) and the Pasture/Grasslands class (4.2%) were less representative. Slopes were less fragmented and more preserved (96.3% of Dense Ombrophilous Forest and secondary forest) than lowlands (71.3%), suggesting that restoration initiatives in the lowlands must be stimulated in this region. We concluded that most of the region sustains well-conserved ecosystems, highlighting the importance of Paraná northern coast for the biodiversity maintenance of the Atlantic Forest.

Verkkokaupan logistiikkaratkaisu

Tässä työssä selvitetään miten peltikattoja ja niiden oheistarvikkeita verkkokaupoissa myyvä yritys voi alkaa myydä ristiin eri valmistajien kattoja ja sadevesijärjestelmiä. Työssä tarkastellaan niin tehokkaan logistiikan kuin verkkokaupan vaatimuksia, sekä sitä miksi näitä tuotteita kannattaa myydä verkkokaupassa eikä perinteiseen tapaan rautakaupoissa. Tehokkaan logistiikan mahdollistamiseksi tuotteiden kokoa on muutettava – pitkien tuotteiden kuljettaminen on aina kallista. On pyrittävä käyttämään standardikokoisia kuljetus- ja käsittely-yksiköitä, jolloin kuljetuskustannukset alenevat ja käsittely helpottuu ja nopeutuu. Runkokuljetuksissa keskusvarastoihin pyritään täysiin kuormiin, kun taas jakelukuljetuksissa asiakkaille on pyrittävä kustannustehokkuuteen ja kattavaan palveluverkostoon, jollaisen tarjoaa esimerkiksi Matkahuolto. Verkkokaupoissa sadevesijärjestelmiä myydään kahdella eri tavalla. Kattopaketti.fi -verkkokaupassa asiakas käyttää kattonsa mitoittamisessa pienoisohjelmaa, johon hän syöttää pyydetyt mitat. Peltikauppa.com toimii tavalliseen tapaan, jolloin asiakas valitsee haluamansa tuotteet valikoimasta. Rakennustarvikkeet ovat puuttuneet verkkokaupoista niiden hankalan logistiikan vuoksi. Tuotteet ovat isoja, kömpelöitä ja niitä tarvitaan määrällisesti paljon. Keskittymällä yhteen tuoteryhmään ja hiomalla sen logistiikka kuntoon, on verkkokaupan kuitenkin mahdollista pystyä kilpailemaan perinteisiä hankintakanavia vastaan.

Käytöstä poistettujen tietokoneiden kustannusedullisin jatkokäsittely puolustusvoimissa

Puolustushallinto on suuri materiaalin käyttäjä ja hankkija, se tuottaa huomattavan määrän atk-romua, joka luokitellaan ongelmajätteeksi. Laitteiden poistaminen jää tulosyksikön vastuulle ja sen on huolehdittava niiden asianmukaisesta jatkokäsittelystä. Tietoteknisten laitteiden hävittämisestä aiheutuvat vuotuiset kulut ovat mittavia, ja tästä syystä vaihtoehtoisia tapoja hävittää materiaalia on pohdittava. Tutkielma esittelee eri jatkokäsittelyprosesseja, joilla käytöstä poistetut tietokoneet voidaan hyötykäyttää ja selvittää kustannusedullisimman vaihtoehdon. Lisäksi tutkimuksessa ilmenee kiertoprosesseista saatavat hyödyt ja haitat. Tutkimusmenetelmänä on kirjallisuustutkimus ja teemahaastattelut. Tutkimuksessa on pyritty lähdeaineiston avulla esittelemään jatkokäsittelyprosesseja yksinkertaisessa muodossa. Kirjallisuuteen ja teemahaastatteluihin perustuen on kartoitettu kustannusedullisin jatkokäsittelyprosessi. Tutkimuksessa ilmeni, kustannusedullisimmaksi vaihtoehdoksi tietokoneiden myynti uusien laitehankintojen yhteydessä. Jatkokäsittelytapa kuitenkin poikkeuksetta vaatii uusien laitteiden hankinnan yhteistyökumppanilta. Tämän vuoksi on tarkasteltava tietokonelaitteiden hintojen kilpailukykyisyys verrattuna muihin laitetoimittajiin.

Quali/quantitative characterization of biogas produced in batch digesters supplied with six distinct substrates

The present research was carried out at the DER/FCAV, São Paulo State University - Brazil, with the purpose of analyzing the quantity and quality of biogas produced by six types of substrates. The substrates used in the anaerobic digestion were characterized as: 1- Litter of broiler (LB); 2- Grinded broiler litter (GBL); 3- Broiler litter with wood shavings (BLWS); 4- Grinded broiler litter with wood shavings (GBLWS); 5- Broiler litter with peanut hulls (BLPH); 6- Grinded broiler litter with peanut hull (GBLPH). It was concluded from the collected data that: the (GBL) substrate showed a superior biogas accumulated production in relation to the other substrates, while the BLWS presented an inferior accumulated production; the grinded substrates showed higher quantities of accumulated biogas in relation to the non-grinded substrates, except for GBLPH, with 20.9 m³ inferior than BLPH; the period of maximum biogas production started from 45 to 60 days, declining after 120 days; at 57 days after filling up the digesters the biogas produced had levels of CH4 superior than 53%, and from 99 days all of them produced biogas with levels of CH4 superior than 70%; LB and GBL presented higher concentrations of CH4 in the biogas.

Nutrient loss in composting of agroindustrial residues

The management of composting may influence the characteristics of the produced compounds. The experiment used three frequencies of plowing, combined with the conditions: with and without coverage of the composting patio, with and without the use of commercial inoculant, resulting in 12 furrows, installed on the Experimental Center of Agricultural Engineering (NEEA), of the STATE UNIVERSITY OF WEST PARANÁ (UNIOESTE), Campus of Cascavel city - state of Paraná (PR), in Brazil. The waste and quantities used in kg were: corn cob (7.5); hatchery residue (5); floater sludge (31); ash (1); wheat cleaning residue (120); wheat pre-cleaning residue (120); corn peel (7.5); solid fraction of wash trucks used to transport chickens (2); solid fraction of pig manure (1) and coal (5), totaling 300kg of natural matter. The aim of this study was to evaluate the influence of plowings, patio coverage and inoculation in losses of N, P, K, Ca, Mg, Na, Cu, Zn, Mn, Fe. The furrows plowed three times a week in the first month showed significant higher losses of N (p<0.05). The coverage of the composting patio influenced significantly the losses of N, K, Mg and Na (p<0.05). The produced compounds had a high agronomic value in relation to macro and micronutrients. It is recommended the use of patio coverage and plowing twice a week in the first month and once a week in the subsequent months for a compound with higher concentrations of nutrients.