Melhoria do processo produtivo na Simoldes aços, SA

O trabalho presente nesta dissertação incidiu sobre a aplicação das metodologias Lean no âmbito do processo produtivo de uma empresa metalomecânica de moldes – SIMOLDES AÇOS, SA. No atual enquadramento, com os mercados nacionais e internacionais debaixo de feroz competição, as empresas são obrigadas a estudar métodos e técnicas que permitam eliminar desperdícios, reduzir custos e tempos de produção, ao mesmo tempo que são exigidos maiores níveis de qualidade dos produtos fabricados com vista ao aumento da competitividade. No decorrer do trabalho desta dissertação de mestrado foi realizada uma análise abrangente do estado atual do sector de atividade do processo produtivo na empresa SIMOLDES AÇOS SA, o que permitiu identificar as áreas e os pontos a intervir e desenhar as soluções de melhoria na atividade do processo produtivo. Na fase concludente do trabalho foram implementadas algumas dessas propostas de melhoria, ao passo que outras ficaram programadas para futura implementação. Na base do trabalho desenvolvido esteve a metodologia Lean, que apresenta um papel relevante na implementação de uma abordagem integrada da função do processo produtivo na aquisição dos objetivos da produção. O presente projeto baseou a sua estratégia de implementação na aplicação da ferramenta do 5S. Esta ferramenta visa a redução de desperdícios, da melhoria do desempenho dos processos e da plena integração de todos os colaboradores no processo de fabrico. Com a implementação das melhorias propostas, foram observadas melhorias significativas no fluxo das atividades do processo produtivo.

Procedimentos contabilísticos e a sua imprtância no controlo interno

Dissertação de Mestrado apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Contabilidade e Finanças, sob orientação do Doutor Carlos Quelhas Martins

Optimização da estrutura principal de um armazém metálico

Esta Tese consiste no cálculo estrutural de um pórtico pertencente a um suposto pavilhão instalado na zona Industrial de Matosinhos. Trata-se de um estudo comparativo entre dois tipos de pórticos metálicos que incluem o estudo das várias vertentes de permeabilidade. O objectivo é a optimização da quantidade de aço e betão que satisfaçam os requisitos segundo o REAP e Eurocódigo para a concepção deste pórtico. Posteriormente é feito uma análise crítica aos resultados obtidos.

Viva@Matemática project: a different way to see math

Viva@Mat is a project developed by four Math teachers from the School of Industrial Studies and Management (ESEIG) that was born with the fundamental objective of engaging ESEIG students with different math backgrounds in Math challenging activities. Some of these activities were transformed into real palpable materials and others into small interactive ones, being the great majority of them proposed by ESEIG’ students themselves. This small project rapidly grew into something we didn’t expect – it did flow over the walls of our institution to the general involving community – specifically to pre-university schools through the Viva@Math Exhibits – Orange, Blue and Green (the fourth, the Purple one is still in development). Nowadays, Viva@Math Exhibits – the public face of the Project – are itinerant and have been travelling between several, and different institutions (pre-university schools, preparatory schools, libraries, among others), around ESEIG and IPP area of influence and having registered visitors/participants of all ages. In this article we will describe the Viva@Math Project, its different activities that are categorized in some “great groups” like Numerical Trivia, Logic Activities and Mental Calculation, Puzzles, Geometric Curiosities, Magic Tricks, among others, designed to challenge students to use the underlying logical-mathematical reasoning to any ordinary and everyday activity. We will give specific and concrete examples of some of the activities developed and, also, reproduce of the general stimulating feedback the Project receives from the enrolled “actors” (teachers, students and their relatives, institutions, among others). We feel that this Project has become a small “bridge” between the pre-university schools and Higher Education Institutions (HEI), in trying to shorten the “gap” between the institutions of different levels of education and bring them to work together.

Evaluation of Pozzolanic Reactivity of Artificial Pozzolans

Materials Science Forum Vols. 730-732 (2013) pp 433-438

Image processing for displacement measurements

Since the invention of photography humans have been using images to capture, store and analyse the act that they are interested in. With the developments in this field, assisted by better computers, it is possible to use image processing technology as an accurate method of analysis and measurement. Image processing's principal qualities are flexibility, adaptability and the ability to easily and quickly process a large amount of information. Successful examples of applications can be seen in several areas of human life, such as biomedical, industry, surveillance, military and mapping. This is so true that there are several Nobel prizes related to imaging. The accurate measurement of deformations, displacements, strain fields and surface defects are challenging in many material tests in Civil Engineering because traditionally these measurements require complex and expensive equipment, plus time consuming calibration. Image processing can be an inexpensive and effective tool for load displacement measurements. Using an adequate image acquisition system and taking advantage of the computation power of modern computers it is possible to accurately measure very small displacements with high precision. On the market there are already several commercial software packages. However they are commercialized at high cost. In this work block-matching algorithms will be used in order to compare the results from image processing with the data obtained with physical transducers during laboratory load tests. In order to test the proposed solutions several load tests were carried out in partnership with researchers from the Civil Engineering Department at Universidade Nova de Lisboa (UNL).

Silica nanoparticles as dexamethasone delivery systems able to induce the osteogenic differentiation of human bone marrow-derived mesenchymal stem cells

Bioactive glasses, especially silica-based materials, are reported to pres- ent osteoconductive and osteoinductive properties, fundamental char- acteristics in bone regeneration [1,2]. Additionally, dexamethasone (Dex) is one of the bioactive agents able to induce the osteogenic differ- entiation of mesenchymal stem cells by increasing the alkaline phos- phatase activity, and the expression levels of Osteocalcin and Bone Sialoprotein [3]. Herein, we synthesised silica (SiO2) nanoparticles (that present inherent bioactivity and ability to act as a sustained drug delivery system), and coated their surface using poly-L-lysine (PLL) and hyaluronic acid (HA) using the layer-by-layer processing technique. Further on, we studied the influence of these new SiO2-polyelectrolyte coated nanoparticles as Dex sustained delivery systems. The SiO2 nanoparticles were loaded with Dex (SiO2-Dex) and coated with PLL and HA (SiO2-Dex-PLL-HA). Their Dex release profile was evaluated and a more sustained release was obtained with the SiO2-Dex-PLL-HA. All the particles were cultured with human bone marrow-derived mes- enchymal stem cells (hBMSCs) under osteogenic differentiation culture conditions. hBMSCs adhered, proliferated and differentiated towards the osteogenic lineage in the presence of SiO2 (DLS 174nm), SiO2-Dex (DLS 175nm) and SiO2-Dex-PLL-HA (DLS 679nm). The presence of these materials induced the overexpression of osteogenic transcripts, namely of Osteocalcin, Bone Sialoprotein and Runx2. Scanning Elec- tron Microscopy/Electron Dispersive Spectroscopy analysis demon- strated that hBMSCs synthesised calcium phosphates when cultured with SiO2-Dex and SiO2-Dex-PLL-HA nanoparticles. These results indi- cate the potential use of these SiO2-polyelectrolytes coated nanoparti- cles as dexamethasone delivery systems capable of promoting osteogenic differentiation of hBMSCs.

Numerical simulation of galvanized rebars pullout

The usage of rebars in construction is the most common method for reinforcing plain concrete and thus bridging the tensile stresses along the concrete crack surfaces. Usually design codes for modelling the bond behaviour of rebars and concrete suggest a local bond stress – slip relationship that comprises distinct reinforcement mechanisms, such as adhesion, friction and mechanical anchorage. In this work, numerical simulations of pullout tests were performed using the finite element method framework. The interaction between rebar and concrete was modelled using cohesive elements. Distinct local bond laws were used and compared with ones proposed by the Model Code 2010. Finally an attempt was made to model the geometry of the rebar ribs in conjunction with a material damaged plasticity model for concrete.

Pesquisa experimental para avaliação da eficiência da fibra de aço na resistência à punção de lajes lisas reforçadas simetricamente

O presente artigo é dedicado à avaliação experimental da eficiência do reforço com fibra de aço em termos da resistência à punção de lajes lisa carregadas simetricamente. Para este fim, oito lajes de 2550 x 2550 x 150 mm3 foram ensaiadas até a ruína, onde se investigou a influência do consumo de fibras (0, 60, 75 e 90 kg/m3) e da resistência do concreto (50 e 70 MPa). Duas lajes de referência, sem fibras, uma para cada classe de resistência do concreto, e uma laje para cada consumo de fibra e para cada classe de resistência do concreto compuseram o programa experimental. Todas as lajes foram armadas à flexão com barras de aço (armadura convencional) de forma a garantir a ruína por punção das lajes de referência. O único reforço transversal foi garantido pelas fibras de aço hooked ends com comprimento e diâmetro de 37 e 0,55 mm, respectivamente, e resistência à tração de aproximadamente 1100 MPa. Os resultados revelaram que as fibras de aço são muito eficientes em converter uma ruína frágil por cisalhamento em uma ruína dúctil por flexão, aprimorando ambos, carga de ruptura e deslocamento. Neste artigo o programa experimental é abordado em detalhe e os principais resultados são apresentados e discutidos.

Numerical simulation of the punching shear behaviour of self-compacting fibre reinforced flat slabs

This paper presents the numerical simulations of the punching behaviour of centrally loaded steel fibre reinforced self-compacting concrete (SFRSCC) flat slabs. Eight half scaled slabs reinforced with different content of hooked-end steel fibres (0, 60, 75 and 90 kg/m3) and concrete strengths of 50 and 70 MPa were tested and numerically modelled. Moreover, a total of 54 three-point bending tests were carried out to assess the post-cracking flexural tensile strength. All the slabs had a relatively high conventional flexural reinforcement in order to promote the occurrence of punching failure mode. Neither of the slabs had any type of specific shear reinforcement rather than the contribution of the steel fibres. The numerical simulations were performed according to the Reissner-Mindlin theory under the finite element method framework. Regarding the classic formulation of the Reissner-Mindlin theory, in order to simulate the progressive damage induced by cracking, the shell element is discretized into layers, being assumed a plane stress state in each layer. The numerical results are, then, compared with the experimental ones and it is possible to notice that they accurately predict the experimental force-deflection relationship. The type of failure observed experimentally was also predicted in the numerical simulations.

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

Estudo da ligação entre componentes estruturais de GFRP (glass fiber reinforced polymer) e componentes estruturais em betão

Dissertação de mestrado integrado em Engenharia Civil

A eficácia da Mediação Familiar no contexto das Responsabilidades Parentais

Dissertação de mestrado em Direito das Crianças, Família e Sucessões

Noise mapping for an urban area: study case: old city of Damascus, Syria

Dissertação de mestrado em Engenharia Urbana

Contributions on Gargaphia (Heteroptera, Tingidae) systematics: redescriptions of two South American species with considerations on the status of G. inca

Gargaphia inca Monte, 1943 was synonymized with G. opima Drake, 1931 without any declared reasons. Gargaphia inca is known only from its type location (Satipo, Peru), and G. opima from Colombia (Villavencio) and Peru (Cam. Del Pichis, type-locality), in addition to the new records here presented, including the first record for Ecuador. Both species are redescribed, and the status of G. inca is revisited and raised from synonymy. Illustrations of some of the most remarkable differences between these taxa are provided, as well as dorsal habitus images. Discussions on the genus systematic status and this nomenclatural act are presented.