Dalla catalisi all’inibizione della crescita da contatto: le molteplici funzioni di O-acetilserina sulfidrilasi batterica

CysK, uno degli isoenzimi di O-acetilserina sulfidrilasi (OASS) presenti in piante e batteri, è un enzima studiato da molto tempo ed il suo ruolo fisiologico nella sintesi della cisteina è stato ben definito. Recentemente sono state scoperte altre funzioni apparentemente non collegate alla sua funzione enzimatica (moonlighting). Una di queste è l’attivazione di una tossina ad attività tRNAsica, CdiA-CT, coinvolta nel sistema di inibizione della crescita da contatto (CDI) di ceppi patogeni di E. coli. In questo progetto abbiamo studiato il ruolo di CysK nel sistema CDI e la formazione di complessi con due differenti partner proteici: CdiA-CT e CysE (serina acetiltransferasi, l’enzima che catalizza la reazione precedente nella biosintesi della cisteina). I due complessi hanno le stesse caratteristiche spettrofluorimetriche e affinità molto simili, ma la cinetica di raggiungimento dell’equilibrio per il complesso tossina:CysK è più lenta che per il complesso CysE:CysK (cisteina sintasi). In entrambi i casi la formazione veloce di un complesso d’incontro è seguita da un riarrangiamento conformazionale che porta alla formazione di un complesso ad alta affinità. L’efficienza di formazione del complesso cisteina sintasi è circa 200 volte maggiore rispetto al complesso CysK:tossina. Una differenza importante, oltre alla cinetica di formazione dei complessi, è la stechiometria di legame. Infatti mentre CysE riesce a legare solo uno dei due siti attivi del dimero di CysK, nel complesso con CdiA-CT entrambi i siti attivi dell’enzima risultano essere occupati. Le cellule isogeniche esprimono un peptide inibitore della tossina (CdiI), e sono quindi resistenti all’azione tRNAsica. Tuttavia, siccome CdiI non altera la formazione del complesso CdiA-CT:CysK, CdiA-CT può esercitare comunque un ruolo nel metabolismo della cisteina e quindi nella fitness dei batteri isogenici, attraverso il legame e l'inibizione di CysK e la competizione con CysE. La via biosintetica della cisteina, un precursore di molecole riducenti, risulta essere molto importante per i batteri soprattutto in condizioni avverse come all’interno dei macrofagi nelle infezioni persistenti. Perciò questa via metabolica è di interesse per lo sviluppo di nuovi antibiotici, e in particolare le due isoforme dell’OASS negli enterobatteri, CysK e CysM, sono potenziali target per lo sviluppo di nuove molecole ad azione antibatterica. Partendo dall’analisi delle modalità di interazione con CysK del suo partner ed inibitore fisiologico, CysE, si è studiato dapprima l’interazione di pentapeptidi che mimassero la regione C-terminale di quest'ultimo, e in base ai dati ottenuti sono stati sviluppati piccoli ligandi sintetici. La struttura generale di questi composti è costituita da un gruppo acido ed un gruppo lipofilo, separati da un linker ciclopropanico che mantiene questi due gruppi in conformazione trans, ottimale per l’interazione col sito attivo dell’enzima. Sulla base di queste considerazioni, di docking in silico e di dati sperimentali ottenuti con la tecnica dell’STD-NMR e con saggi di binding spettrofluorimetrici, si è potuta realizzare una analisi di relazione struttura-attività che ha portato via via all’ottimizzazione dei ligandi. Il composto più affine che è stato finora ottenuto ha una costante di dissociazione nel range del nanomolare per entrambe le isoforme, ed è un ottimo punto di partenza per lo sviluppo di nuovi farmaci.

Identification and characterization of periplasmic proteins implicated in the adaptation of Helicobacter pylori to the human gastric niche

Helicobacter pylori è un batterio Gram-negativo in grado di colonizzare la mucosa gastrica umana e persistere per l'intero arco della vita dell'ospite. E' associato a patologie gastrointestinali, quali gastrite cronica, ulcere gastriche e duodenali, adenocarcinomi e linfomi gastrici. Si tratta di uno dei patogeni più diffusi, presente in circa metà della popolazione mondiale, e il solo che si è adattato a vivere nell'ambiente ostile dello stomaco umano. Molteplici sono i fattori di virulenza che permettono al batterio la colonizzazione della nicchia gastrica e contribuiscono, anche attraverso l' induzione di una risposta infiammatoria, a profonde modificazioni dell' omeostasi gastrica. Queste ultime si associano, ad esempio, all'iperproduzione di fattori proinfiammatori, ad alterazioni sia della regolazione della secrezione acida gastrica sia del ciclo cellulare e della morte cellulare programmata (apoptosi) delle cellule epiteliali gastriche, a disordini nel metabolismo del ferro e a carenze di elementi essenziali. Studi sulla diversità genetica di H. pylori osservata in ceppi isolati da varie regioni del mondo, dimostrano che tale batterio ha avuto una coevoluzione col genere umano attraverso la storia, ed è verosimile che H. pylori sia stato un costituente del microbiota gastrico per almeno 50.000 anni. Scopo della tesi è stato quello di identificare e caratterizzare proteine importanti per la colonizzazione e l'adattamento di H. pylori alla nicchia gastrica. In particolare gli sforzi si sono concentrati su due proteine periplasmatiche, la prima coinvolta nella difesa antiossidante (l'enzima catalasi-like, HP0485), e la seconda nel trasporto di nutrienti presenti nell'ambiente dello stomaco all'interno della cellula (la componente solubile di un ABC transporter, HP0298). La strategia utilizzata prevede un'analisi bioinformatica preliminare, l'ottenimento del gene per amplificazione, mediante PCR, dal genoma dell'organismo, la costruzione di un vettore per il clonaggio, l'espressione eterologa in E. coli e la successiva purificazione. La proteina così ottenuta viene caratterizzata mediante diverse tecniche, quali spettroscopia UV, dicroismo circolare, gel filtrazione analitica, spettrometria di massa. Il capitolo 1 contiene un'introduzione generale sul batterio, il capitolo 2 e il capitolo 3 descrivono gli studi relativi alle due proteine e sono entrambi suddivisi in un abstract iniziale, un'introduzione, la presentazione dei risultati, la discussione di questi ultimi, i materiali e i metodi utilizzati. La catalasi-like (HP0485) è una proteina periplasmatica con struttura monomerica, appartenente ad una famiglia di enzimi a funzione per la maggior parte sconosciuta, ma evolutivamente correlati alla ben nota catalasi, attore fondamentale nella difesa di H. pylori, grazie alla sua azione specifica di rimozione dell'acqua ossigenata. HP0485, pur conservando il fold catalasico e il legame al cofattore eme, non può compiere la reazione di dismutazione dell'acqua ossigenata; possiede invece un'attività perossidasica ad ampio spettro, essendo in grado di accoppiare la riduzione del perossido di idrogeno all'ossidazione di diversi substrati. Come la catalasi, lavora ad alte concentrazioni di aqua ossigenata e non arriva a saturazione a concentrazioni molto elevate di questo substrato (200 mM); la velocità di reazione catalizzata rimane lineare anche a questi valori, aspetto che la differenzia dalle perossidasi che vengono in genere inattivate da concentrazioni di perossido di idrogeno superiori a 10-50 mM. Queste caratteristiche di versatilità e robustezza suggeriscono che la catalasi-like abbia un ruolo di scavenger dell'acqua ossigenata e probabilmente anche un'altra funzione connessa al suo secondo substrato, ossia l'ossidazione di composti nello spazio periplasmatico cellulare. Oltre alla caratterizzazione dell'attività è descritta anche la presenza di un ponte disolfuro, conservato nelle catalasi-like periplasmatiche, con un ruolo nell'assemblaggio dell'eme per ottenere un enzima attivo e funzionale. La proteina periplasmatica HP0298, componente di un sistema di trasporto ABC, è classificata come trasportatore di dipeptidi e appartiene a una famiglia di proteine in grado di legare diversi substrati, tra cui di- e oligopeptidi, nichel, eme, glutatione. Benchè tutte associate a trasportatori di membrana batterici, queste proteine presentano un dominio di legame al substrato che risulta essere conservato nei domini extracellulari di recettori specifici di mammifero e uomo. Un esempio sono i recettori ionotropici e metabotropici del sistema nervoso. Per caratterizzare questa proteina è stato messo a punto un protocollo di ligand-fishing accoppiato alla spettrometria di massa. La proteina purificata, avente un tag di istidine, è stata incubata con un estratto cellulare di H. pylori per poter interagire con il suo substrato specifico all'interno dell'ambiente naturale in cui avviene il legame. Il complesso proteina-ligando è stato poi purificato per cromatografia di affinità e analizzato mediante HPLC-MS. L'identificazione dei picchi differenziali tra campioni con la proteina e 5 campioni di controllo ha portato alla caratterizzazione di pentapeptidi particolarmente ricchi in aminoacidi idrofobici e con almeno un residuo carico negativamente. Considerando che H. pylori necessita di alcuni aminoacidi essenziali, per la maggior parte idrofobici, e che lo stomaco umano è particolarmente ricco di peptidi prodotti dalla digestione delle proteine introdotte con il cibo, il ruolo fisiologico di HP0298 potrebbe essere l'internalizzazione di peptidi, con caratteristiche specifiche di lunghezza e composizione, che sono naturalmente presenti nella nicchia gastrica.

Electrical investigation of p-type 4H-SiC heavily doped by ion implantation

In the last decades, an increasing interest in the research field of wide bandgap semiconductors was observed, mostly due to the progressive approaching of silicon-based devices to their theoretical limits. 4H-SiC is an example among these, and is a mature compound for applications. The main advantages offered 4H-SiC in comparison with silicon are an higher breakdown field, an higher thermal conductivity, a higher operating temperature, very high hardness and melting point, biocompatibility, but also low switching losses in high frequencies applications and lower on-resistances in unipolar devices. Then, 4H-SiC power devices offer great performance improvement; moreover, they can work in hostile environments where silicon power devices cannot function. Ion implantation technology is a key process in the fabrication of almost all kinds of SiC devices, owing to the advantage of a spatially selective doping. This work is dedicated to the electrical investigation of several differently-processed 4H-SiC ion- implanted samples, mainly through Hall effect and space charge spectroscopy experiments. It was also developed the automatic control (Labview) of several experiments. In the work, the effectiveness of high temperature post-implant thermal treatments (up to 2000°C) were studied and compared considering: (i) different methods, (ii) different temperatures and (iii) different duration of the annealing process. Preliminary p + /n and Schottky junctions were also investigated as simple test devices. 1) Heavy doping by ion implantation of single off-axis 4H-SiC layers The electrical investigation is one of the most important characterization of ion-implanted samples, which must be submitted to mandatory post-implant thermal treatment in order to both (i) recover the lattice after ion bombardment, and (ii) address the implanted impurities into lattice sites so that they can effectively act as dopants. Electrical investigation can give fundamental information on the efficiency of the electrical impurity activation. To understand the results of the research it should be noted that: (a) To realize good ohmic contacts it is necessary to obtain spatially defined highly doped regions, which must have conductivity as low as possible. (b) It has been shown that the electrical activation efficiency and the electrical conductivity increase with the annealing temperature increasing. (c) To maximize the layer conductivity, temperatures around 1700°C are generally used and implantation density high till to 10 21 cm -3 . In this work, an original approach, different from (c), is explored by the using very high annealing temperature, around 2000°C, on samples of Al + -implant concentration of the order of 10 20 cm -3 . Several Al + -implanted 4H-SiC samples, resulting of p-type conductivity, were investigated, with a nominal density varying in the range of about 1-5∙10 20 cm -3 and subjected to two different high temperature thermal treatments. One annealing method uses a radiofrequency heated furnace till to 1950°C (Conventional Annealing, CA), the other exploits a microwave field, providing a fast heating rate up to 2000°C (Micro-Wave Annealing, MWA). In this contest, mainly ion implanted p-type samples were investigated, both off-axis and on-axis <0001> semi-insulating 4H-SiC. Concerning p-type off-axis samples, a high electrical activation of implanted Al (50-70%) and a compensation ratio below 10% were estimated. In the work, the main sample processing parameters have been varied, as the implant temperature, CA annealing duration, and heating/cooling rates, and the best values assessed. MWA method leads to higher hole density and lower mobility than CA in equivalent ion implanted layers, resulting in lower resistivity, probably related to the 50°C higher annealing temperature. An optimal duration of the CA treatment was estimated in about 12-13 minutes. A RT resistivity on the lowest reported in literature for this kind of samples, has been obtained. 2) Low resistivity data: variable range hopping Notwithstanding the heavy p-type doping levels, the carrier density remained less than the critical one required for a semiconductor to metal transition. However, the high carrier densities obtained was enough to trigger a low temperature impurity band (IB) conduction. In the heaviest doped samples, such a conduction mechanism persists till to RT, without significantly prejudice the mobility values. This feature can have an interesting technological fall, because it guarantee a nearly temperature- independent carrier density, it being not affected by freeze-out effects. The usual transport mechanism occurring in the IB conduction is the nearest neighbor hopping: such a regime is effectively consistent with the resistivity temperature behavior of the lowest doped samples. In the heavier doped samples, however, a trend of the resistivity data compatible with a variable range hopping (VRH) conduction has been pointed out, here highlighted for the first time in p-type 4H-SiC. Even more: in the heaviest doped samples, and in particular, in those annealed by MWA, the temperature dependence of the resistivity data is consistent with a reduced dimensionality (2D) of the VRH conduction. In these samples, TEM investigation pointed out faulted dislocation loops in the basal plane, whose average spacing along the c-axis is comparable with the optimal length of the hops in the VRH transport. This result suggested the assignment of such a peculiar behavior to a kind of spatial confinement into a plane of the carrier hops. 3) Test device the p + -n junction In the last part of the work, the electrical properties of 4H-SiC diodes were also studied. In this case, a heavy Al + ion implantation was realized on n-type epilayers, according to the technological process applied for final devices. Good rectification properties was shown from these preliminary devices in their current-voltage characteristics. Admittance spectroscopy and deep level transient spectroscopy measurements showed the presence of electrically active defects other than the dopants ones, induced in the active region of the diodes by ion implantation. A critical comparison with the literature of these defects was performed. Preliminary to such an investigation, it was assessed the experimental set up for the admittance spectroscopy and current-voltage investigation and the automatic control of these measurements.

Photoconductivity and Electro-Optical Properties of Wide Band Gap Metal Oxides

The PhD activity described in this Thesis was focused on the study of metal-oxide wide-bandgap materials, aiming at fabricating new optoelectronic devices such as solar-blind UV photodetectors, high power electronics, and gas sensors. Photocurrent spectroscopy and DC photocurrent time evolution were used to investigate the performance of prototypes under different atmospheres, temperatures and excitation wavelengths (or dark conditions). Cathodoluminescence, absorption spectroscopy, XRD and SEM were used to assess structural, morphologic, electrical and optical properties of materials. This thesis is divided into two main sections, each describing the work done on a different metal-oxide semiconductor. 1) MOVPE-grown Ga2O3 thin films for UV solar-blind photodetectors and high power devices The semiconducting oxides, among them Ga2O3, have been employed for several decades as transparent conducting oxide (TCO) electrodes for fabrication of solar cells, displays, electronic, and opto-electronic devices. The interest was mainly confined to such applications, as these materials tend to grow intrinsically n-type, and attempts to get an effective p-type doping has consistently failed. The key requirements of TCO electrodes are indeed high electrical conductivity and good transparency, while crystallographic perfection is a minor issue. Furthermore, for a long period no high-quality substrates and epi-layers were available, which in turn impeded the development of a truly full-oxide electronics. Recently, Ga2O3 has attracted renewed interest, as large single crystals and high-quality homo- and hetero-epitaxial layers became available, which paved the way to novel application areas. Our research group spent the last two years in developing a low temperature (500-700°C) MOVPE growth procedure to obtain thin films of Ga2O3 on different substrates (Dept. of Physics and IMEM-CNR at UNIPR). We obtained a significant result growing on oriented sapphire epitaxial films of high crystalline, undoped, pure phase -Ga2O3 (hexagonal). The crystallographic properties of this phase were investigated by XRD, in order to clarify the lattice parameters of the hexagonal cell. First design and development of solar blind UV photodetectors based on -phase was carried out and the optoelectronic performance is evaluated by means of photocurrent spectroscopy. The UV-response is adequately fast and reliable to render this unusual phase a subject of great interest for future applications. The availability of a hexagonal phase of Ga2O3 stable up to 700°C, belonging to the same space group of gallium nitride, with high crystallinity and tunable electrical properties, is intriguing in view of the development of nitride-based devices, by taking advantage of the more favorable symmetry and epitaxial relationships with respect to the monoclinic β-phase. In addition, annealing at temperatures higher than 700°C demonstrate that the hexagonal phase converts totally in the monoclinic one. 2) ZnO nano-tetrapods: charge transport mechanisms and time-response in optoelectronic devices and sensors Size and morphology of ZnO at the nanometer scale play a key role in tailoring its physical and chemical properties. Thanks to the possibility of growing zinc oxide in a variety of different nanostructures, there is a great variety of applications, among which gas sensors, light emitting diodes, transparent conducting oxides, solar cells. Even if the operation of ZnO nanostructure-based devices has been recently demonstrated, the mechanisms of charge transport in these assembly is still under debate. The candidate performed an accurate investigation by photocurrent spectroscopy and DC-photocurrent time evolution of electrical response of both single-tetrapod and tetrapod-assembly devices. During the research done for this thesis, a thermal activation energy enables the performance of samples at high temperatures (above about 300°C). The energy barrier is related to the leg-to-leg interconnection in the assembly of nanotetrapods. Percolation mechanisms are responsible for both the very slow photo-response (minutes to hours or days) and the significant persistent photocurrent. Below the bandgap energy, electronic states were investigated but their contribution to the photocurrent are two-three order of magnitude lower than the band edge. Such devices are suitable for employ in photodetectors as well as in gas sensors, provided that the mechanism by which the photo-current is generated and gas adsorption on the surface modify the conductivity of the material are known.

Effect of lactose solid-state on the aerosolization performance of drug-carrier mixtures

Lactose, in particular α-lactose monohydrate, is the most used carrier for inhalation. Its surface and solid-state properties are of paramount importance in determining drug aerosolization performance. However, these properties may be altered by processing, such as micronization, thus affecting the product performance and stability. The present research project focused on the study of the effect of lactose solid-state on the aerosolization performance of drug-carrier mixtures, giving particular attention to the impact of micronization on lactose physico-chemical properties. The formation of a fraction of hygroscopic anhydrous α-lactose, rather than amorphous lactose, as a consequence of the mechanical stress stemming from micronization was evidenced by 1H NMR, XRPD and DSC analyses performed on samples of micronized lactose. The development of a new DVS method capable to identify and quantify different forms of α-lactose (hygroscopic anhydrous, stable anhydrous and amorphous), even simultaneously present in the same sample, confirmed the results obtained with the above-mentioned techniques. The influence of lactose solid-state on drug respirability was then evaluated through the preparation and in vitro aerodynamic assessment of ternary and binary mixtures containing two different drugs. In particular, the use, as carriers, of anhydrous forms of α-lactose in place of the conventional α-lactose monohydrate resulted in significantly improved respirability in the case of salbutamol sulphate and poorer performance in the case of budesonide. In an attempt to rationalize the obtained results, IGC was selected as a tool to investigate possible variations in the surface energy of the studied lactose carriers and APIs. A direct correlation between the total surface free energy of lactose carriers and drug respirability was not found. However, salbutamol sulphate and budesonide exhibited different specific surface free energy, to which the difference in the aerosolization performance may be, at least in part, ascribed.

The Politics of Re-(en)visioning: Contemporary British Rewritings of Greek and Roman Tragedies

This thesis examines three different kinds of socio-political rewritings of Greek and Roman tragedies – Sarah Kane’s “Phaedra’s Love”, Tony Harrison’s “Prometheus”, and Martin Crimp’s “Cruel and Tender” – written, staged or screened in Britain (and, more precisely, England) between 1996 and 2004. Offering close readings of these re-visionary appropriations, this dissertation analyses some of the innumerable and unexpected forms that ancient tragedy can assume today. In particular, it explores how three talented British authors have subverted the conventions of the noblest literary and dramatic genre in order to (re)write contemporaneity in ways that oscillate between the personal and the public, the local and the global, the national and the transnational.

Design and synthesis of new multitarget inhibitors of dengue virus replication

Attraverso una combinazione di virtual screening/virtual library generation abbiamo identificato una nuova serie di inibitori della replicazione del virus Dengue, attivi sia su un target virale (NS5) sia su uno cellulare (Src chinasi)

The episcopal complex of Eio-El Tolmo de Minateda (Hellín, Albacete, Spain). Architecture and spatial organization. 7th to 8th centuries AD

The episcopal complex of Eio, located in El Tolmo de Minateda, was built between the end of the 6th century and the beginning of the 7th century, possibly as a political decision taken by the ecclesiastical authority in the capital of the Visigothic kingdom (Toletum). With the comprehensive study of the whole complex presented below (construction cycles, furniture, decoration and location of spaces), we can interpret the function of each space in the basilica and the domus episcopi, the liturgical and general movement routes, the existence of some hierarchical environments, and specify the chronological development of the buildings. After the Arab-Berber conquest of Hispania in the early 8th century, the whole complex will experience a series of transformations that will convert the religious and monumental public area into a private, residential and industrial Islamic quarter.

Levensschets van sulthan Ibrahiem, vorst van Eirakh: uit het Arabisch in het Maleisch vertaald door eenen Maleischen schriftgeleerden

en uit het Maleisch in het Nederduitsch overgebracht door Philippus Pieter Roorda van Eijsinga.

Hādhihi Tarjamat quṭb al-wāṣilīn wa-ghawth al-sālikīn al-ʻārif billāh Sayyidī Shams al-Dīn Muḥammad Abī al-Maḥāsin al-Qāwuqjī al-Ḥasanī

min qalam ʻAbd al-Qādir al-Adʹhamī al-Ṭarābulusī.

Mecmua : manuscript, undated

1. Turkish letter samples (ff. 1v-10v) -- 2. Risālah fī bayān ḥurmat shurb dukhān al-tunbāk / Mawlānā ʻAbd al-Nāfiʻ (ff. 11v-19v) -- 3. Risālah fī lubs al-aḥmar al-baḥt / Shaykh Qāsim (ff. 20v-21v) -- 4. Excerpt from Ibn al-ʻArabī (ff. 23v-24r) -- 5. Excerpt from Ayyuhā al-walad of al-Ghazzālī (ff. 26v-28r) -- 6. Excerpt from Kitāb Laṭāʼif al-adabīyah (ff. 30r-32r) -- 7. Şerh-i Hilyeti'n-Nebî (ff. 33r-35v) -- 8. Sharḥ Jannat al-asmāʼ wa-al-āyāt Allāh [sic] (ff. 35v-38v) -- 9. Fetvâlar (ff. 39v-96v) -- 10. ??? (ff. 98r-103v) -- 11. Persian and Turkish poems (ff. 104r-133r) -- 12. Manzume-i Nidâî Kaysûnîzâde (ff. 134v-157v) -- 13. Excerpts, hadiths and fatwas (ff. 158r-162r) -- Mā jāʼa fī ṭarīq al-taṣawwuf wa-arkānihi (ff. 162v-164v).

Hormona anti-mulleriana: marcador da reserva ovárica

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

(Table 1, page 661) Average composition of fossil nodules from three localities studied in the Transdanubian Central Mountains of Hungary

Fossil manganese nodules and encrustations from seamount' and basin' localities in the Transdanubian Central Mountains of Hungary are lithologically, mineralogically and chemically similar to some modern marine ferromanganese oxide deposits, and show no evidence of postdepositional changes other than cementation. Five groups of deposits were encountered: Fe/Mn nodules, encrusted shells, pavements, stains, and Fe oxide encrusted intraclasts, the first three of which are specific to the 'seamount' environment and the last to the basins'. Optical and electron microprobe investigation of the samples shows them to exhibit many similarities with modern ferromanganese oxide deposits, and that many of the nodules are surrounded by a halo of dispersed ferromanganese oxides, strongly suggesting that they continued to accrete metals through the pore waters of unlithified sediments for a period after burial. By contrast, pavements which appear to have grown on hardgrounds at the sea floor show little or no evidence of derivation of metals from underlying sediments. Geochemical investigations on the deposits show the seamount' varieties to be closer in composition to most modern nodules and crusts than the basin' varieties, and that the latter are essentially manganese and trace-element-poor ferruginous deposits. Nevertheless, all can be more or less compositionally equated with modern ferromanganese oxide deposits forming in marginal Atlantic environments, which would be in accord with the proposed depositional environment of the Transdanubian Central Mountains based on other evidence.

1983 University of Michigan Football Team

Recovery, processing, and utilization of gas from sanitary landfills /

Mode of access: Internet.