Density-viscosity product of small-volume ionic liquid samples using quartz crystal impedance analysis

Quartz crystal impedance analysis has been developed as a technique to assess whether room-temperature ionic liquids are Newtonian fluids and as a small-volume method for determining the values of their viscosity-density product, rho eta. Changes in the impedance spectrum of a 5-MHz fundamental frequency quartz crystal induced by a water-miscible room-temperature ionic liquid, 1-butyl-3-methylimidazolium. trifluoromethylsulfonate ([C(4)mim][OTf]), were measured. From coupled frequency shift and bandwidth changes as the concentration was varied from 0 to 100% ionic liquid, it was determined that this liquid provided a Newtonian response. A second water-immiscible ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C(4)mim][NTf2], with concentration varied using methanol, was tested and also found to provide a Newtonian response. In both cases, the values of the square root of the viscosity-density product deduced from the small-volume quartz crystal technique were consistent with those measured using a viscometer and density meter. The third harmonic of the crystal was found to provide the closest agreement between the two measurement methods; the pure ionic liquids had the largest difference of similar to 10%. In addition, 18 pure ionic liquids were tested, and for 11 of these, good-quality frequency shift and bandwidth data were obtained; these 12 all had a Newtonian response. The frequency shift of the third harmonic was found to vary linearly with square root of viscosity-density product of the pure ionic liquids up to a value of root(rho eta) approximate to 18 kg m(-2) s(-1/2), but with a slope 10% smaller than that predicted by the Kanazawa and Gordon equation. It is envisaged that the quartz crystal technique could be used in a high-throughput microfluidic system for characterizing ionic liquids.

Association of common variants in NPPA and NPPB with circulating natriuretic peptides and blood pressure

We examined the association of common variants at the NPPA-NPPB locus with circulating concentrations of the natriuretic peptides, which have blood pressure-lowering properties. We genotyped SNPs at the NPPA-NPPB locus in 14,743 individuals of European ancestry, and identified associations of plasma atrial natriuretic peptide with rs5068 (P = 8 × 10 -70), rs198358 (P = 8 × 10 -30) and rs632793 (P = 2 × 10 -10), and of plasma B-type natriuretic peptide with rs5068 (P = 3 × 10 -12), rs198358 (P = 1 × 10 -25) and rs632793 (P = 2 × 10 -68). In 29,717 individuals, the alleles of rs5068 and rs198358 that showed association with increased circulating natriuretic peptide concentrations were also found to be associated with lower systolic (P = 2 × 10 -6 and 6 × 10 -5, respectively) and diastolic blood pressure (P = 1 × 10 -6 and 5 × 10 -5), as well as reduced odds of hypertension (OR = 0.85, 95% CI = 0.79-0.92, P = 4 × 10 -5; OR = 0.90, 95% CI = 0.85-0.95, P = 2 × 10 -4, respectively). Common genetic variants at the NPPA-NPPB locus found to be associated with circulating natriuretic peptide concentrations contribute to interindividual variation in blood pressure and hypertension.

Ten Year Performance Evaluation of a Field-Scale Zero-Valent Iron Permeable Reactive Barrier Installed to Remediate Trichloroethene Contaminated Groundwater

The Monkstown Fe0 PRB, Europe’s oldest commercially installed PRB, had been treating trichloroethene (TCE) contaminated groundwater for about 10 years on the Nortel Network site in Northern Ireland when cores were collected in December, 2006. Groundwater data from 2001-2006 indicated that TCE is being remediated to below detection limits as the contaminated groundwater flows through the PRB, Ca and Fe carbonates, crystalline and amorphous FeS, and Fe (oxy)hydroxides precipitates are present in the Fe0 filing material within the PRB. A greater variety of minerals are associated with a 1 cm thick slightly cemented crust at the entrance of the Fe0 section of the reactive vessel and the discontinuous cemented Fe0 material directly below it. Also, a greater presence of microbial communities occurred in the upper portion of the PRB compared to the lower section which might be due to less favourable conditions (i.e. high pH, low oxygen) for microbial growth in the lower section of the PRB. Visual estimation suggests that the Fe0 filings in the effluent section of the PRB have life-span of 10+ years compared to the Fe0 filings in the thin influent section of the PRB which may have a life span of only ~2-5 more years. Multi-tracer tests indicated that preferential pathways have formed in this PRB over the 10 years of operation.

Ionic liquids for the nuclear industry: A radiochemical, structural, and electrochemical investigation

The applicability of ionic liquids within the nuclear industry has been investigated. The radiation stability of ionic liquids containing dialkylimidazolium cations has been tested through with alpha, beta and gamma irradiation. The results of these tests suggest that imidazolium salts have stabilities similar to alkylbenzenes and greater than tetrabutylphosphate / odorless kerosene (TBP/OK) mixtures. The oxidative dissolution of uranium dioxide and the anodic dissolution of uranium metal and plutonium metal have been carried out in various ionic liquid media (C) 2002 American Chemical Society.

Evaluation of a Microfluidic Device for the Electrochemical Determination of Halide Content in Ionic Liquids

A microfluidic device designed for electrochemical studies on a microliter scale has been utilized for the examination of impurity levels in ionic liquids (ILs). Halide impurities are common following IL synthesis, and this study demonstrates the ability to quantify low concentrations of halide in a range of ILs to levels of similar to 5 ppm, even in ILs not currently measurable using other methods such as ion chromatography. To validate the mixer device, the electrochemistry of ferrocene was also examined and compared with spectroscopic and bulk electrochemistry measurements. An automated

PLS modelling and fault detection on the Tennessee Eastman benchmark

This paper describes the application of multivariate regression techniques to the Tennessee Eastman benchmark process for modelling and fault detection. Two methods are applied : linear partial least squares, and a nonlinear variant of this procedure using a radial basis function inner relation. The performance of the RBF networks is enhanced through the use of a recently developed training algorithm which uses quasi-Newton optimization to ensure an efficient and parsimonious network; details of this algorithm can be found in this paper. The PLS and PLS/RBF methods are then used to create on-line inferential models of delayed process measurements. As these measurements relate to the final product composition, these models suggest that on-line statistical quality control analysis should be possible for this plant. The generation of `soft sensors' for these measurements has the further effect of introducing a redundant element into the system, redundancy which can then be used to generate a fault detection and isolation scheme for these sensors. This is achieved by arranging the sensors and models in a manner comparable to the dedicated estimator scheme of Clarke et al. 1975, IEEE Trans. Pero. Elect. Sys., AES-14R, 465-473. The effectiveness of this scheme is demonstrated on a series of simulated sensor and process faults, with full detection and isolation shown to be possible for sensor malfunctions, and detection feasible in the case of process faults. Suggestions for enhancing the diagnostic capacity in the latter case are covered towards the end of the paper.

"Cómo pintar el aire". Fundamentos científicos de la perspectiva atmosférica

La perspectiva aérea o atmosférica es juzgada por los pintores como parte esencial de la pintura, una vez establecidos los presupuestos geométricos de la representación naturalista mediante la perspectiva lineal. Leonardo da Vinci fue el primer autor en definir la perspectiva aérea o atmosférica, conocidos ya a través de L. B. Alberti los fundamentos geométricos de la perspectiva lineal en el tratado De Pictura (1435). Doscientos años después, tras la influyente publicación del Optics de Newton, contextualizadas bajo el espíritu racionalista del siglo XVIII, el artículo estudia las recomendaciones que desde la ciencia y los científicos (específicamente a través de tres figuras relevantes: Brook Taylor, J. H. Lambert y Gaspard Monge) se dan a los pintores con la pretensión de arbitrar una medición exacta del color, en confrontación con el tradicional empirismo del mundo artístico. Este tema puede considerarse un capítulo de gran interés en la larga historia de la pintura y la representación de los fenómenos atmosféricos, cuyos antecedentes teóricos tienen su inicio en el Débat sur le Coloris de la Académie Française del siglo XVII y sus resultados, conducirán hacia el nacimiento de la moderna Teoría del color, en respuesta a una cuestión tan compleja sobre cómo pintar el aire.

Do non-native invasive fish support elevated lamprey populations?

Summary
1: Managing populations of predators and their prey to achieve conservation or resource management goals is usually technically challenging and frequently socially controversial. This is true even in the simplest ecosystems but can be made much worse when predator–prey relationships are in?uenced by complex interactions, such as biological invasions, population trends or animal movements.
2: Lough Neagh in Northern Ireland is a European stronghold for pollan Coregonus autumnalis, a coregonine ?sh and for river lampreyLampetra ?uviatilis, which feeds parasitically as an adult. Both species are of high conservation importance. Lampreys are known to consume pollan but detailed knowledge of their interactions is scant. While pollan is well known to be a landlocked species in Ireland, the life cycle of normally anadromous river lamprey in Lough Neagh has been unclear. The Lough is also a highly perturbed ecosystem, supporting several invasive, non-native ?sh species that have the potential to in?uence lamprey–pollan interactions.
3: We applied stable isotope techniques to resolve both the movement patterns of lamprey and trophic interactions in this complex community. Recognizing that stable isotope studies are often hampered by high-levels of variability and uncertainty in the systems of interest, we employed novel Bayesian mixing models, which incorporate variability and uncertainty.
4: Stable isotope analyses identi?ed troutSalmo trutta and non-native breamAbramis brama as the main items in lamprey diet. Pollan only represented a major food source for lamprey between May and July.
5: Stable isotope ratios of carbon in tissues from 71 adult lamprey showed no evidence of marine carbon sources, strongly suggesting that Lough Neagh is host to a highly unusual, nonanadromous freshwater population. This ?nding marks out the Lough’s lamprey population as of particular scienti?c interest and enhances the conservation signi?cance of this feature of the Lough.
6: Synthesis and applications.Our Bayesian isotopic mixing models illustrate an unusual pattern of animal movement, enhancing conservation interest in an already threatened population. We have also revealed a complex relationship between lamprey and their food species that is suggestive of hyperpredation, whereby non-native species may sustain high lamprey populations that may in turn be detrimental to native pollan.Long-term conservation of lamprey and pollan in this system is likely to require management intervention, but in light of this exceptional complexity, no simple management options are currently supported. Conservation plans will require better characterization ofpopulation-level interactions and simulation modelling of interventions. More generally, our study demonstrates the importance of considering a full range of possible trophic interactions, particularly in complex ecosystems, and highlights Bayesian isotopic mixing models as powerful tools in resolving trophic relationships.
Key-words: Bayesian, conservation dilemma, Coregonus autumnalis, hyperpredation, Lampetra ?uviatilis, pollan, potamodromous, River lamprey, stable isotope analysis in R, stable isotope

Tight constraints on the existence of additional planets around HD 189733†

We report a transit timing study of the transiting exoplanetary system HD 189733. In total, we observed 10 transits in 2006 and 2008 with the 2.6-m Nordic Optical Telescope, and two transits in 2007 with the 4.2-m William Herschel Telescope. We used Markov Chain Monte Carlo simulations to derive the system parameters and their uncertainties, and our results are in a good agreement with previously published values. We performed two independent analyses of transit timing residuals to place upper mass limits on putative perturbing planets. The results show no evidence for the presence of planets down to 1 Earth mass near the 1:2 and 2:1 resonance orbits, and planets down to 2.2 Earth masses near the 3:5 and 5:3 resonance orbits with HD 189733b. These are the strongest limits to date on the presence of other planets in this system. Based on observations made with the Nordic Optical Telescope, operated on the island of La Palma jointly by Denmark, Finland, Iceland, Norway and Sweden, in the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofísica de Canarias. Based on observations made with the William Herschel Telescope operated on the island of La Palma by the Isaac Newton Group in the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofísica de Canarias. ‡

Small volume laboratory on a chip measurements incorporating the quartz crystal microbalance to measure the viscosity-density product of room temperature ionic liquids

A microfluidic glass chip system incorporating a quartz crystal microbalance (QCM) to measure the square root of the viscosity-density product of room temperature ionic liquids (RTILs) is presented. The QCM covers a central recess on a glass chip, with a seal formed by tightly clamping from above outside the sensing region. The change in resonant frequency of the QCM allows for the determination of the square root viscosity-density product of RTILs to a limit of similar to 10 kg m(-2) s(-0.5). This method has reduced the sample size needed for characterization from 1.5 ml to only 30 mu l and allows the measurement to be made in an enclosed system.

Short-term phytoestrogen supplementation alters insulin-like growth factor profile but not lipid or antioxidant status

Phytoestrogens are plant compounds that have been proposed to have a variety of health benefits. The aim of this study was to assess the effects of these compounds on a number of physiological endpoints. Subjects were given a single intake of a phytoestrogen-rich (80 mg total phytoestrogens) supplement containing soy, rye and linseed (Phase 1), followed by a week-long intervention using the same supplement (Phase 2) (80 mg total phytoestrogens daily). A number of biochemical endpoints were assessed including urinary phytoestrogen metabolites, lipids, antioxidant status, DNA damage and insulin-like growth factor-1 (IGF-1) and IGF binding protein-1 (IGFBP-1) and -3 (IGFBP-3). Ten healthy female subjects took part in the study. Excretion of the isoflavones genistein, daidzein and equol in urine increased in both phases of the study. No other endpoint was altered in Phase 1. However, in Phase 2, concentrations of IGF-1 and IGFBP-3 were increased by phytoestrogen supplementation [IGF-1, median (IQ range), baseline 155 (123, 258), postweek 265 (228, 360) ng/ml, P

Transonic aeroelastic simulation for instability searches and uncertainty analysis

In this paper the use of eigenvalue stability analysis of very large dimension aeroelastic numerical models arising from the exploitation of computational fluid dynamics is reviewed. A formulation based on a block reduction of the system Jacobian proves powerful to allow various numerical algorithms to be exploited, including frequency domain solvers, reconstruction of a term describing the fluid–structure interaction from the sparse data which incurs the main computational cost, and sampling to place the expensive samples where they are most needed. The stability formulation also allows non-deterministic analysis to be carried out very efficiently through the use of an approximate Newton solver. Finally, the system eigenvectors are exploited to produce nonlinear and parameterised reduced order models for computing limit cycle responses. The performance of the methods is illustrated with results from a number of academic and large dimension aircraft test cases.

Thermal conductivity measurement of liquids in a microfluidic device

A new microfluidic-based approach to measuring liquid thermal conductivity is developed to address the requirement in many practical applications for measurements using small (microlitre) sample size and integration into a compact device. The approach also gives the possibility of high-throughput testing. A resistance heater and temperature sensor are incorporated into a glass microfluidic chip to allow transmission and detection of a planar thermal wave crossing a thin layer of the sample. The device is designed so that heat transfer is locally one-dimensional during a short initial time period. This allows the detected temperature transient to be separated into two distinct components: a short-time, purely one-dimensional part from which sample thermal conductivity can be determined and a remaining long-time part containing the effects of three-dimensionality and of the finite size of surrounding thermal reservoirs. Identification of the one-dimensional component yields a steady temperature difference from which sample thermal conductivity can be determined. Calibration is required to give correct representation of changing heater resistance, system layer thicknesses and solid material thermal conductivities with temperature. In this preliminary study, methanol/water mixtures are measured at atmospheric pressure over the temperature range 30-50A degrees C. The results show that the device has produced a measurement accuracy of within 2.5% over the range of thermal conductivity and temperature of the tests. A relation between measurement uncertainty and the geometric and thermal properties of the system is derived and this is used to identify ways that error could be further reduced.

Determination of the Physical Properties of Room Temperature Ionic Liquids Using a Love Wave Device

In this work, we have shown that a 100 MHz Love wave device can be used to determine whether room temperature ionic liquids (RTILs) are Newtonian fluids and have developed a technique that allows the determination of the density-viscosity product, rho eta of a Newtonian RTIL. In addition, a test for a Newtonian response was established by relating the phase change to insertion loss change. Five concentrations of a water-miscible RTIL and seven pure RTILs were measured. The changes in phase and insertion loss were found to vary linearly with the square root of the density-viscosity product for values up to (rho eta)(1/2) similar to 10 kg m(-2) s(-1/2). The square root of the density-viscosity product was deduced from the changes in either phase or insertion loss using glycerol as a calibration liquid. In both cases, the deduced values of rho eta agree well with those measured using viscosity and density meters. Miniaturization of the device, beyond that achievable with the lower-frequency quartz crystal microbalance approach, to measure smaller volumes is possible. The ability to fabricate Love wave and other surface acoustic wave sensors using planar metallization technologies gives potential for future integration into lab-on-a-chip analytical systems for characterizing ionic liquids.