Factores que influenciam a actividade física na vida diária dos doentes com doença pulmonar obstrutiva crónica

RESUMO: A monitorização da actividade física diária nos doentes com Doença Pulmonar Obstrutiva Crónica (DPOC) tem sido alvo de grande interesse nos últimos tempos. No entanto, ainda nenhum estudo reuniu o conjunto de factores – grau de obstrução, hiperinsuflação pulmonar, alteração das trocas gasosas, dispneia, dessaturação de oxigénio, capacidade de exercício, ansiedade e depressão – que podem afectar a sua realização, nem os correlacionou com os dados obtidos com o pedómetro e que reflectem o que cada doente realmente faz no seu dia-adia. O presente estudo teve como objectivo principal identificar os factores que influenciam a actividade física na vida diária dos doentes com DPOC. Estudaram-se 55 doentes do sexo masculino com idade média de 67 anos e um FEV1 médio de 50,8% do previsto, com DPOC moderada a muito grave (estadios II a IV), de entre os utentes do Laboratório de Fisiopatologia Respiratória do Centro Hospitalar de Torres Vedras. Avaliaram-se os parâmetros da escala de dispneia modificada do Medical Research Council (MMRC), escala London Chest Activity of Daily Living (LCADL), escala de Ansiedade e Depressão Hospitalar (HADS), índice BODE, estudo funcional respiratório em repouso, teste de marcha de seis minutos e o número de passos por dia utilizando um pedómetro por um período de três dias. Observou-se que os doentes deram em média 4972 passos por dia e apresentaram uma cotação total média de 17,7 na LCADL, tendo existido diferenças estatisticamente significativas em função da gravidade da doença, sendo que os doentes mais graves são os que em média andam menos no seu dia-a-dia e apresentam maior limitação na realização das actividades de vida diária. O número de passos por dia apresentou correlações significativas com as variáveis idade, dispneia, depressão, hiperinsuflação monar, gravidade de obstrução (FEV1), trocas gasosas (DLCO), saturação arterial de oxigénio mínima e correlação mais forte com a distância percorrida no TM6m. Este estudo permitiu identificar que os factores determinantes da actividade física na vida diária de doentes com DPOC nos estadios II a IV, foram a dispneia e a distância percorrida no TM6m. Além disso, estes doentes constituem um grupo sedentário, particularmente a partir do estadio III, com níveis de actividade física diária baixos.-----------ABSTRACT There has been an increased interest in monitoring the daily physical activity in patients with Chronic Obstructive Pulmonary Disease (COPD). However, no specific study has been realized so far that has put the different factors which can affect the results obtained altogether, (such as the degree of obstruction, pulmonary hyperinflation, abnormal gas exchange, dyspnea, oxygen desaturation, exercise capacity, anxiety and depression) or correlated with data obtained from the pedometer, which reflect each patient actual activity in their daily life. This study aimed to identify the main factors that influence physical activity in daily life of patients with COPD. The scope of this study was 55 male patients with an average age of 67 years old and an average FEV1 of 50.8% predicted, with moderate to severe COPD (stages II to IV), among patients from the Respiratory Pathophysiology Laboratory of the Centro Hospitalar de Torres Vedras. Were evaluated the parameters of the modified Medical Research Council dyspnea scale (MMRC), London Chest Activity of Daily Living scale (LCADL), Hospital Anxiety and Depression scale (HADS), BODE index, pulmonary function test at rest, six minute walk test (6MWT) and the number of steps per day using a pedometer for a period of three days. It was observed that patients have walked an average of 4972 steps per day and had a total score of 17.7 at LCADL, and statistically significant differences were stated depending on the severity of the disease. Whereas patients with a more severe degree of the disease have walked least in their daily life and show greater restraint in carrying out activities of daily living. The number of steps per day showed significant correlations with age, dyspnea, depression, lung hyperinflation, severity of obstruction (FEV1), gas exchange (DLCO), minimum arterial oxygen saturation and stronger correlation with distance walked on 6MWT. This study shows that the crucial factors of physical activity in daily life of COPD patients at stages II to IV were dyspnea and distance on 6MWT. Moreover, these patients constitute a sedentary group, particularly from the stage III, with lower levels of daily physical activity.

Multi-scale vegetation classification using earth observation data of the Sundarban mangrove forest, Bangladesh.

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Experimental Reinforcement of Wood Beams

Rehabilitation is becoming more and more usual in the construction sector in Portugal. The introduction of newer construction materials and technical know-how of integrating different materials for achieving desired engineering goals is an important step to the development of the sector. Wood industry is also getting more and more adapted to composite technologies with the introduction of the so called “highly engineered wood products” and with the use of modification treatments. This work is an attempt to explain the viability of using stainless steel and glass fibre reinforced polymer (GFRP) as reinforcements in wood beams. This thesis specifically focuses on the flexural behaviour of Portuguese Pine unmodified and modified wood beams. Two types of modification were used: 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU) resin and amid wax. The behaviour of the material was analysed with a nonlinear model. The latter model simulates the behaviour of the reinforced wood beams under flexural loading. Small-scale beams (1:15) were experimented in flexural bending and the experimental results obtained were compared with the analytical model results. The experiments confirm the viability of the reinforcing schemes and the working procedures. Experimental results showed fair agreement with the nonlinear model. A strength increase between 15% and 80% was achieved. Stiffness increased by 40% to 50% in beams reinforced with steel but no significant increase was achieved with the glass fibre reinforcement.

Otimização da extração sólido-líquido de antioxidantes de subprodutos florestais pelo método de superfície de resposta

Portugal continental apresenta uma vasta área florestal, que representa cerca de 35,4% da ocupação total do solo, com predominância de espécies como o eucalipto (Eucalyptus globulus) e o pinheiro-bravo (Pinus pinaster). Estas espécies apresentam uma elevada importância a nível económico, designadamente devido à sua ampla utilização, nomeadamente na indústria de celulose e papel, gerando elevadas quantidades de resíduos. Este resíduo de biomassa florestal é utilizado, na sua totalidade, para a geração de energia, na forma de eletricidade ou aquecimento. No entanto, existem outras opções viáveis, a nível económico, tais como a valorização destes subprodutos como fonte de compostos polifenólicos tornando-os, assim, um produto de valor acrescentado. A extração de compostos fenólicos de subprodutos florestais, como folhas de eucalipto e agulhas de pinheiros tem vindo a aumentar devido, principalmente, à substituição de antioxidantes sintéticos, contribuindo para a valorização de subprodutos florestais. Contudo, apesar de todas as potenciais aplicações e vantagens, apenas algumas centenas de espécies aromáticas identificadas são utilizadas à escala comercial. Neste trabalho foi avaliada a capacidade antioxidante de subprodutos da floresta, otimizando as condições de extração através do estudo dos fatores: tempo de extração, temperatura e composição de solvente através do método de superfície de resposta. O planeamento experimental utilizado teve como base um planeamento de compósito central e a avaliação do perfil de antioxidantes das matrizes analisadas foi realizada através de métodos de quantificação total, como o teor fenólico total, a atividade anti-radicalar – método do DPPH (radical 2,2-difenil-1-picrilhidrazilo) e o método de FRAP. Estes métodos analíticos convencionais foram modificados e, devidamente validados, para a análise em leitor de microplacas. Verificou-se que os extratos de pinheiro e de eucalipto, tanto as amostras verdes com as amostras, apresentam uma promissora capacidade antioxidante. O planeamento fatorial aplicado permitiu otimizar as condições de extração em relação às matrizes verdes. Contudo, o mesmo não se verificou em relação às matrizes secas. A composição (% de água) é sem dúvida o fator com mais efeito em todas as amostras (coeficientes de primeira e segunda ordem no modelo). Também a temperatura foi identificada como um fator com efeito significativo sobre os sistemas em análise.

Modelling of the kinetics of municipal solid waste composting in full-scale mechanical-biological treatment plants

A thesis submitted in fulfilment of the requirements for the Degree of Doctor of Philosophy in Sanitary Engineering in the Faculty of Sciences and Technology of the New University of Lisbon

Constructing and validating a scale of employee satisfaction with HRM practices in the healthcare context

The concept of HRM perceptions is a growing interest in the literature, as one of the antecedents of HRM outcomes. Regardless, not only the cognitive aspect of perception is interesting in this field (what you think) but also the affective perspective is of interest (how you feel about it). In this study we propose a scale for assessing satisfaction with the perceptions of the HRM practices. A 24 item Likert-type scale was developed considering literature review, to assess subjects’ satisfaction with Human Resources Practices in a healthcare setting. Talked reflections were held and a survey encompassing all workers from a Hospital was conducted later, with a sample of 922 subjects. Exploratory and Confirmatory Factor Analysis were performed; reliability was tested using Cronbach’s alpha. The scale presents good psychometric properties with alpha values that range from .71 to .91. Exploratory and Confirmatory Factor Analysis demonstrated that the scale presents a very good fit with CFI= 0.94, AGFI= 0.88, and RMSEA= 0.07. The present study represents a first approach in the usage of this scale and despite having a large sample, respondents originate from a single institution. This study presents a pertinent scale towards measuring a seldom explored construct of the worker-organization relationship. The scale is parsimonious and results are promising. There seems to be very little research on how subjects feel about the HRM practices. This construct, very much in line with more recent studies concerning worker perceptions can be especially interesting in the context of the worker-organization relationship.

Cultural Intelligence Scale: Validation in a Multicultural Setting of Erasmus Mundus Students and Alumni

Purpose: This work aims at further developing and testing the psychometric properties of the Cultural Intelligence Scale (Ang & Van Dyne, 2006) in an Erasmus Mundus Students and Alumni Population, including reliability. Design Methodology: The study included 626 participants from 109 different countries that emcompasses 6 continents. Exploratory and Confirmatory Factor Analysis procedures were carried out in order to test the scale in a multicultural scale of Erasmus Mundus Students. Reliability was assessed using Cronbach Alpha. Results: The scale presents excellent psychometric properties with alpha values that range from .84 to .90. Exploratory and Confirmatory Factor Analyses demonstrated that the original model of the scale presents an exceptionally good fit. Limitations: The present study was conducted using a convenience sample and online questionnaires that limit its conclusions when we consider the globality of the Erasmus Mundus Students. Research/Practical Implications: This study presents evidence that Ang and Van Dyne’s scale is an adequate measure instrument to assess intercultural intelligence in a multicultural setting of students and alumni. Originality/Value: Multicultural samples and studies are becoming more and more present and relevant; the study of intercultural competences and habilities is becoming increasingly important, and in this task, solid psychometric instruments are of paramount importance. This study presents evidence that Ang and Van Dyne’s (2006) scale is a fairly recent and parsimonious instrument with excellent psychometric properties properties.

Chitosan/AuNPs Modified Graphene Electrochemical Sensor for Label-Free Human Chorionic Gonadotropin Detection

A new immunosensor is presented for human chorionic gonadotropin (hCG), made by electrodepositing chitosan/gold-nanoparticles over graphene screen-printed electrode (SPE). The antibody was covalently bound to CS via its Fc-terminal. The assembly was controlled by electrochemical Impedance Spectroscopy (EIS) and followed by Fourier Transformed Infrared (FTIR). The hCG-immunosensor displayed linear response against the logarithm-hCG concentration for 0.1–25 ng/mL with limit of detection of 0.016 ng/mL. High selectivity was observed in blank urine and successful detection of hCG was also achieved in spiked samples of real urine from pregnant woman. The immunosensor showed good detection capability, simplicity of fabrication, low-cost, high sensitivity and selectivity.

New modified electrochemical conductive paper support for BSA detection

Chemical sensors and biosensors are widely used to detect various kinds of protein target biomolecules. Molecularly Imprinted Polymers (MIPs) have raised great interest in this area, because these act as antibody-like recognition materials, with high affinity to the template molecule. Compared to natural antibodies, these are also of lower cost and higher stability. There are different types of supports used to carry MIP materials, mostly of these made of gold, favourably assembled on a Screen Printed Electrode (SPE) strategy. For this work a new kind of support for the sensing layer was developed: conductive paper. This support was made by modifying first cellulose paper with paraffin wax (to make it waterproof), and casting a carbon-ink on it afterwards, to turn it conductive. The SPAM approach previously reported in1 was employed herein to assemble to MIP sensing material on the conductive paper. The selected charged monomers were (vinylbenzyl) trimethlammonium chloride (positive charge) or vinylbenzoic acid (negative charge), used to generate binding positions with single-type charge (positive or negative). The non-specific binding area of the MIP layer was assembled by chronoamperometry-assisted polymerization (at 1 V, for 60, 120 or 180 seconds) of vinylbenzoate, cross-linked with ethylene glycol vinyl ether. The BSA biomolecules lying within the polymeric matrix were removed by Proteinase K action. All preparation stages of the MIP assembly were followed by FTIR, Raman spectroscopy and, electrochemical analysis. In general, the best results were obtained for longer polymerization times and positively charged binding sites (which was consistent with a negatively-charged protein under physiological pH, as BSA). Linear responses against BSA concentration ranged from 0.005 to 100 mg/mL, in PBS buffer standard solutions. The sensor was further calibrated in standard solutions that were prepared in synthetic or real urine, and the analytical response became more sensitive and stable. Compared to the literature, the detection capability of the developed device is better than most of the reported electrodes. Overall, the simplicity, low cost and good analytical performance of the BSA SPE device, prepared with positively charged binding positions, seems a suitable approach for practical application in clinical context. Further studies with real samples are required, as well as gathering with electronic-supporting devices to allow on-site readings.

Development of an Unmanned Capsule for large-scale maritime search and rescue

This paper describes the development and testing of a robotic capsule for search and rescue operations at sea. This capsule is able to operate autonomously or remotely controlled, is transported and deployed by a larger USV into a determined disaster area and is used to carry a life raft and inflate it close to survivors in large-scale maritime disasters. The ultimate goal of this development is to endow search and rescue teams with tools that extend their operational capability in scenarios with adverse atmospheric or maritime conditions.

Mathematical modelling of shallow flows: closure models drawn from grain-scale mechanics of sediment transport and flow hydrodynamics

Canadian Journal of Civil Engineering 36(10) 1605–16

“Green Electrodes” Modified with Au Nanoparticles Synthesized in Glycerol, as Electrochemical Nitrite Sensor

A new environmentally friendly Au nanoparticles (Au NPs) synthesis in glycerol by using ultraviolet irradiation and without extra-added stabilizers is described. The synthesis proposed in this work may impact on the non-polluting production of noble nanoparticles with simple chemicals normally found in standard laboratories. These Au NPs were used to modify a carbon paste electrode (CPE) without having to separate them from the reaction medium. This green electrode was used as an electrochemical sensor for the nitrite detection in water. At the optimum conditions the green sensor presented a linear response in the 2.0×10−7–1.5×10−5 M concentration range, a good detection sensitivity (0.268 A L mol−1), and a low detection limit of 2.0×10−7 M of nitrite. The proposed modified green CPE was used to determine nitrite in tap water samples.