Two new mu-(1,3-azido)-bridged polymers: alternating single and double bridges in a 1D nickel(II) complex and uniform bridge in a 2D copper(II) complex: Syntheses, single-crystal structures and magnetic studies

Two polymeric azido bridged complexes [Ni2L2(N-3)(3)](n)(ClO4). (1) and [Cu(bpdS)(2)(N-3)],(ClO4),(H2O)(2.5n) (2) [L = Schiff base, obtained from the condensation of pyridine-2-aldehyde with N,N,2,2-tetramethyl-1,3-propanediamine; bpds = 4,4'-bipyridyl disulfide] have been synthesized and their crystal structures have been determined. Complex 1, C26H42ClN15Ni2O4, crystallizes in a triclinic system, space group P1 with a 8.089(13), b = 9.392(14), c = 12.267(18) angstrom, a = 107.28(l), b 95.95(1), gamma = 96.92(1)degrees and Z = 2; complex 2, C20H21ClCuN7O6.5S4, crystallizes in an orthorhombic system, space group Pnna with a = 10.839(14), b = 13.208(17), c = 19.75(2) angstrom and Z = 4. The crystal structure of I consists of 1D polymers of nickel(L) units, alternatively connected by single and double bridging mu-(1,3-N-3) ligand with isolated perchlorate anions. Variable temperature magnetic susceptibility data of the complex have been measured and the fitting,of magnetic data was carried out applying the Borris-Almenar formula for such types of alternating one-dimensional S = 1 systems, based on the Hamiltonian H = -J Sigma(S2iS2i-1 + aS(2i)S(2i+1)). The best-fit parameters obtained are J = -106.7 +/- 2 cm(-1); a = 0.82 +/- 0.02; g = 2.21 +/- 0.02. Complex 2 is a 2D network of 4,4 topology with the nodes occupied by the Cu-II ions, and the edges formed by single azide and double bpds connectors. The perchlorate anions are located between pairs of bpds. The magnetic data have been fitted considering the complex as a pseudo-one-dimensional system, with all copper((II)) atoms linked by [mu(1,3-azido) bridging ligands at axial positions (long Cu...N-3 distances) since the coupling through long bpds is almost nil. The best-fit parameters obtained with this model are J = -1.21 +/- 0.2 cm(-1), g 2.14 +/- 0.02. (c) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2005).

Biodiversity conservation across scales: lessons from a science–policy dialogue

One of the core challenges of biodiversity conservation is to better understand the interconnectedness and interactions of scales in ecological and governance processes. These interrelationships constitute not only a complex analytical challenge but they also open up a channel for deliberative discussions and knowledge exchange between and among various societal actors which may themselves be operating at various scales, such as policy makers, land use planners, members of NGOs, and researchers. In this paper, we discuss and integrate the perspectives of various disciplines academics and stakeholders who participated in a workshop on scales of European biodiversity governance organised in Brussels in the autumn of 2010. The 23 participants represented various governmental agencies and NGOs from the European, national, and sub-national levels. The data from the focus group discussions of the workshop were analysed using qualitative content analysis. The core scale-related challenges of biodiversity policy identified by the participants were cross-level and cross-sector limitations as well as ecological, social and social-ecological complexities that potentially lead to a variety of scale-related mismatches. As ways to address these cha- llenges the participants highlighted innovations, and an aim to develop new interdisciplinary approaches to support the processes aiming to solve current scale challenges.

A compact and high-resolution version of a capacitively coupled contactless conductivity detector

An all-in-one version of a capacitively coupled contactless conductivity detector is introduced. The absence of moving parts (potentiometers and connectors) makes it compact (6.5 cm(3)) and robust. A local oscillator, working at 1.1 MHz, was optimized to use capillaries of id from 20 to 100 lam. Low noise circuitry and a high-resolution analog-to-digital converter (ADC) (21 bits effective) grant good sensitivities for capillaries and background electrolytes currently used in capillary electrophoresis. The fixed frequency and amplitude of the signal generator is a drawback that is compensated by the steady calibration curves for conductivity. Another advantage is the possibility of determining the inner diameter of a capillary by reading the ADC when air and subsequently water flow through the capillary. The difference of ADC reading may be converted into the inner diameter by a calibration curve. This feature is granted by the 21-bit ADC, which eliminates the necessity of baseline compensation by hardware. In a typical application, the limits of detection based on the 3 sigma criterion (without baseline filtering) were 0.6, 0.4, 0.3, 0.5, 0.6, and 0.8 mu mol/L for K(+), Ba(2+), Ca(2+), Na(+), Mg(2+), and Li(+), respectively, which is comparable to other high-quality implementations of a capacitively coupled contactless conductivity detector.

WAMM: wiki aided meta modelling

All over the world, organizations are becoming more and more complex, and there’s a need to capture its complexity, so this is when the DEMO methodology (Design and Engineering Methodology for Organizations), created and developed by Jan L. G. Dietz, reaches its potential, which is to capture the structure of business processes in a coherent and consistent form of diagrams with their respective grammatical rules. The creation of WAMM (Wiki Aided Meta Modeling) platform was the main focus of this thesis, and had like principal precursor the idea to create a Meta-Editor that supports semantic data and uses MediaWiki. This prototype Meta-Editor uses MediaWiki as a receptor of data, and uses the ideas created in the Universal Enterprise Adaptive Object Model and the concept of Semantic Web, to create a platform that suits our needs, through Semantic MediaWiki, which helps the computer interconnect information and people in a more comprehensive, giving meaning to the content of the pages. The proposed Meta-Modeling platform allows the specification of the abstract syntax i.e., the grammar, and concrete syntax, e.g., symbols and connectors, of any language, as well as their model types and diagram types. We use the DEMO language as a proofof-concept and example. All such specifications are done in a coherent and formal way by the creation of semantic wiki pages and semantic properties connecting them.

Conectores adversativos na fala do natalense: uma análise funcionalista com implicações para o ensino

This work analyzes the behavior of the adversative connectors in the speech of the user of Natal, with views to suggest implications for the grammar teaching in the high school Portuguese languages classes. It is an investigation that sits on the functionalist paradigm, specifically in the protected ideas for Givón. For so much, data of situations of speech from the corpus Discurso e gramática lingual falada e escrita da cidade do Natal (FURTADO DA CUNHA, 1998). The sample embraces a total of forty interviews, of which the occurrences are cut out whose registrations mark the existence of adversatives constructions in narratives of personal experience and in the opinion reports, modality of oral language, of the mentioned database. The work revisits authors of the grammar, Cunha (1986); Bechara (2006); Perini (2006), among others; authors that contemplate referring approaches to the use of opposition connectors as: Barreto (1999); Tavares (2003); Longhin (2003); Silva (2005); Rocha (2006); Neves (2000, 2006). The results of the panoramic analysis reveal as adversity connectors in use for the habitant of Natal, for recurrence order, the mas, e, aí, agora, só que, no entanto and já. Analyzed the results, the same ones are compared with the treatment presented by the traditional grammar, with application of functional iconicity principle, markdness principle and the prototype of the category is chosen. In the differentiated analysis of the item " agora ", structural profile of the constructions is analyzed that involve the item, semantic profile, times, manners and aspects of the verbs that they wrap up in the constructions in reference, trajectory of grammaticalization and comparison with the prototype of the category. Finally, they are suggested implications of whole the study for the teaching of Portuguese language, in the high school classes

Conectores sequenciadores em artigos de opinião escritos por vestibulandos: uma questão de marcação linguístia com implicações para o ensino

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Conectores sequenciadores e e aí em contos e narrativas de experiência pessoal escritos por alunos de ensino fundamental: uma abordagem sociofuncionalista

In this dissertation, based on two theoretical frameworks, American functionalism and variationist sociolinguistics, I take as subject the sequence connectors E and AÍ, which has the grammatical function of indicating retroactive-propeller sequenciation of information. I analyze the variable use of these connectors in texts written by students from two public schools in the city of Natal, RN, attending at the time of data collection (the year 2012), two distinct levels of basic education: the sixth and the ninth year. The students who contributed to this research wrote, as part of their activities in the classroom, texts of two narrative genres: narrative of personal experience (non-fictional) and short story (fictional). In addition, these students and their Portuguese teachers answered a test of linguistic attitude in which they gave their opinions regarding the appropriateness of the use of connectors E and AÍ in contexts of speech and writing marked by distinct degrees of formality. The results obtained by means of quantitative analysis showed different tendencies of linguistic, social and stylistic distribution of connectors E and AÍ in the narrative texts written by the students. I related these results to the action of two principles: the principle of persistence, linked to the process of change by grammaticalization, and the principle of stylistic markedness. Besides, I took into account the answers provided by students and teachers to the test of linguistic attitude for refine the interpretation of the results

Influence of the Connector and Implant Design on the Implant-Tooth-Connected Prostheses

Purpose:The purpose of this study was to evaluate stress transfer patterns between implant-tooth-connected prostheses comparing rigid and semirigid connectors and internal and external hexagon implants.Materials and Methods:Two models were made of photoelastic resin PL-2, with an internal hexagon implant of 4.00 x 13 mm and another with an external hexagon implant of 4.00 x 13 mm. Three denture designs were fabricated for each implant model, incorporating one type of connection in each one to connect implants and teeth: 1) welded rigid connection; 2) semirigid connection; and 3) rigid connection with occlusal screw. The models were placed in the polariscope, and 100-N axial forces were applied on fixed points on the occlusal surface of the dentures.Results:There was a trend toward less intensity in the stresses on the semirigid connection and solid rigid connection in the model with the external hexagon; among the three types of connections in the model with the internal hexagon implant, the semirigid connection was the most unfavorable one; in the tooth-implant association, it is preferable to use the external hexagon implant.Conclusions:The internal hexagon implant establishes a greater depth of hexagon retention and an increase in the level of denture stability in comparison with the implant with the external hexagon. However, this greater stability of the internal hexagon generated greater stresses in the abutment structures. Therefore, when this association is necessary, it is preferable to use the external hexagon implant.

Prevalence of removable partial dentures users treated at the Aracatuba Dental School - UNESP

Objectives: The aim of this study was to evaluate the frequency of removable partial dentures (RPD) at the Aracatuba Dental School.Methods: The study was conducted by analysing 412 clinical history of patients attended at the RPD clinics in the period from 2000 to 2007.Results: 412 charts were analysed: 148 (35.9%) men and 264 (64.1%) women. The mean age was 53.8 years (men) and 52.4 years (women). A total of 556 dentures were made; of these, 233 (41.90%) were maxillary and 323 (58.09%) were mandibular dentures. The most frequent Kennedy classification found was Class III (maxilla) and Class I (mandible). In the maxilla, 55% (126) of the major connectors were of the anterior-posterior palatal bar, while in the mandible, 64% (202) were the lingual bar. As regards the claps, 401 were circumferential and 318 were bar claps.Conclusion: The mean age of the patients was 52.9 years with higher prevalence of female patients; the most frequent Kennedy's classification was Class I in mandible and Class III in maxilla; the most common major connector was anterior-posterior palatal bar for maxilla and lingual bar for mandible; the circumferential clasps were the most common retainer used in both jaws.

Numeric evaluation of the stiffness of log-concrete composite beams submitted the cyclical load

In this paper was evaluated, using the software ANSYS, the stiffness (El) of the log-concrete composite beams, of section T, with connectors formed by bonded-in steel rods, type CA-50, disposed in X, with application of cyclical load. The stiffness of the system was evaluated through the simulation of bending tests, considered 1/2 beam, with cyclical shipment varying among 40 % and 5 % of the strength of the connection with the load relationship R=0,125, for a total of 10 load cycles applied. The numeric results show a good agreement with experimental tests.

Eigenvalue analyses of two parallel lines using a single real transformation matrix

For a typical non-symmetrical system with two parallel three phase transmission lines, modal transformation is applied using some examples of single real transformation matrices. These examples are applied searching an adequate single real transformation matrix to two parallel three phase transmission line systems. The analyses are started with the eigenvector and eigenvalue studies, using Clarke's transformation or linear combinations of Clarke's elements. The Z C and parameters are analyzed for the case that presents the smallest errors between the exact eigenvalues and the single real transformation matrix application results. The single real transformation determined for this case is based on Clarke's matrix and its main characteristic is the use of a unique homopolar reference. So, the homopolar mode becomes a connector mode between the two three-phase circuits of the analyzed system. ©2005 IEEE.

Dual path: A concept to improve the esthetic replacement of missing anterior teeth with a removable partial denture

The dual path of insertion concept for removable partial denture (RPD) design may be used in esthetically demanding situations. When compared to conventional RPDs, the main advantage of this design is the minimal use of clasps. This clinical report describes the treatment of a patient with an anterior maxillary edentulous area using a dual path RPD. The diagnostic cast was surveyed to ensure the adequacy of the undercuts on the mesial surfaces of the anterior abutments, where rigid minor connectors were placed. Inverted V-shaped canine cingulum rest seats were prepared to provide resistance to tooth movement during function. The dual path RPD concept allows excellent esthetic results, minimizes tooth preparation, and reduces the tendency toward plaque accumulation in a Kennedy class IV partially edentulous arch. © 2008 by The American College of Prosthodontists.

A novel single-phase hpf hybrid rectifier suitable for front-end trolleybus systems

This paper proposal presents the development and the experimental analysis of a new single-phase hybrid rectifier structure with high power factor (PF) and low harmonic distortion of current (THDI), suitable for application in traction systems of electrical vehicles pulled by electrical motors (trolleybus), which are powered by urban distribution network. This front-end rectifier structure is capable of providing significant improvements in trolleybuses systems and in the urban distribution network costs, and efficiency. The proposed structure is composed by an ordinary single-phase diode rectifier with parallel connection of a switched converter. It is outlined that the switched converter is capable of composing the input line current waveform assuring high power factor (HPF) and low THDI, as well as ordinary front-end converter. However, the power rating of the switched converter is about 34% of the total output power, assuring robustness and reliability. Therefore, the proposed structure was named single-phase HPF hybrid rectifier. A prototype rated at 15kW was developed and analyzed in laboratory. It was found that the input line current harmonic spectrum is in accordance with the harmonic limits imposed by IEC61000-3-4. The principle of operation, the mathematical analysis, the PWM control strategy, and experimental results of a 15kW prototype are also presented in this paper. © 2009 IEEE.

Proposal of a hybrid rectifier structure with HPF and low THD suitable for front-end trolleybuses systems supplied by AC distribution networks

This paper presents the development and the experimental analysis of a new single-phase hybrid rectifier structure with high power factor (PF) and low harmonic distortion of current (THDI), suitable for application in traction systems of electrical vehicles pulled by electrical motors (trolleybus), which are powered by urban distribution network. This front-end rectifier structure is capable of providing significant improvements in trolleybuses systems and in the urban distribution network costs, and efficiency. The proposed structure is composed by an ordinary single-phase diode rectifier with parallel connection of a switched converter. It is outlined that the switched converter is capable of composing the input line current waveform assuring high power factor (HPF) and low THDI, as well as ordinary front-end converter. However, the power rating of the switched converter is about 34% of the total output power, assuring robustness and reliability. Therefore, the proposed structure was named single-phase HPF hybrid rectifier. A prototype rated at 15kW was developed and analyzed in laboratory. It was found that the input line current harmonic spectrum is in accordance with the harmonic limits imposed by IEC61000-3-4. The principle of operation, the mathematical analysis, the PWM control strategy, and experimental results are also presented in this paper. © 2009 IEEE.

The functional biogeography of species: Biogeographical species roles of birds in Wallacea and the West Indies

Biogeographical systems can be analyzed as networks of species and geographical units. Within such a biogeographical network, individual species may differ fundamentally in their linkage pattern, and therefore hold different topological roles. To advance our understanding of the relationship between species traits and large-scale species distribution patterns in archipelagos, we use a network approach to classify birds as one of four biogeographical species roles: peripherals, connectors, module hubs, and network hubs. These roles are based upon the position of species within the modular network of islands and species in Wallacea and the West Indies. We test whether species traits - including habitat requirements, altitudinal range-span, feeding guild, trophic level, and body length - correlate with species roles. In both archipelagos, habitat requirements, altitudinal range-span and body length show strong relations to species roles. In particular, species that occupy coastal- and open habitats, as well as habitat generalists, show higher proportions of connectors and network hubs and thus tend to span several biogeographical modules (i.e. subregions). Likewise, large body size and a wide altitudinal range-span are related to a wide distribution on many islands and across several biogeographical modules. On the other hand, species restricted to interior forest are mainly characterized as peripherals and, thus, have narrow and localized distributions within biogeographical modules rather than across the archipelago-wide network. These results suggest that the ecological amplitude of a species is highly related to its geographical distribution within and across bio geographical subregions and furthermore supports the idea that large-scale species distributions relate to distributions at the local community level. We finally discuss how our biogeographical species roles may correspond to the stages of the taxon cycle and other prominent theories of species assembly. © 2013 The Authors.