The role of mentoring in facilitating the process of repurposing OER

This paper presents the initial data analysis of a research that is work in progress. It discusses the role of mentoring and peer support in facilitating the process of repurposing open educational resources (OER). It also reports on the lessons so far learned from the analysis of two distinct but related case studies on working with learners to use and disseminate OER.

Assigning and combining probabilities in single-case designs: A second study

The present study builds on a previous proposal for assigning probabilities to the outcomes computed using different primary indicators in single-case studies. These probabilities are obtained comparing the outcome to previously tabulated reference values and reflect the likelihood of the results in case there was no intervention effect. The current study explores how well different metrics are translated into p values in the context of simulation data. Furthermore, two published multiple baseline data sets are used to illustrate how well the probabilities could reflect the intervention effectiveness as assessed by the original authors. Finally, the importance of which primary indicator is used in each data set to be integrated is explored; two ways of combining probabilities are used: a weighted average and a binomial test. The results indicate that the translation into p values works well for the two nonoverlap procedures, with the results for the regression-based procedure diverging due to some undesirable features of its performance. These p values, both when taken individually and when combined, were well-aligned with the effectiveness for the real-life data. The results suggest that assigning probabilities can be useful for translating the primary measure into the same metric, using these probabilities as additional evidence on the importance of behavioral change, complementing visual analysis and professional's judgments.

Estudos de caso em química

The case-study method of instruction is increasing in popularity and instructors of various scientific disciplines are adopting this method for their courses. Its effectiveness suggests that there is a need for such resources to be used in chemistry education. In this paper we describe this method in detail and present our use of cases in a scientific communication course offered to undergraduate chemistry students at the University of São Paulo. The description of the method and the example of its use may be helpful for faculty members who wish to explore new ways to engage students more deeply in their learning and to reinvigorate their own teachig practice.

Customer reference marketing in a business to business context

This study focuses on the phenomenon of customer reference marketing in a business tobusiness (B to B) context. Although customer references are generally considered an important marketing and sales tool, the academic literature has paid surprisingly little attention to the phenomenon. The study suggests that customer references could be viewed as important marketing assets for industrial suppliers, and the ability to build, manage and leverage customer reference portfolios systematically constitutes a relevant marketing capability. The role of customer references is examined in the context of the industrial suppliers' shift towards a solution and project orientation and in the light of the on going changes in the project business. Suppliers in several industry sectors are undergoing a change from traditional equipment manufacturing towards project and solution oriented business. It is argued in this thesis that the high complexity, the project oriented nature and the intangible service elements that characterise many contemporary B to B offerings further increase the role of customer references. The study proposes three mechanisms of customer reference marketing: status transfer, validation through testimonials and the demonstration of experience and prior performance. The study was conducted in the context of Finnish B to B process technology and information technology companies. The empirical data comprises 38 interviews with managers of four case companies, 165 customer reference descriptions gathered from six case companies' Web sites, as well as company internal material. The findings from the case studies show that customer references have various external and internal functions that contribute to the growth and performance of B to B firms. Externally, customer references bring status transfer effects from reputable customers, concretise and demonstrate complex solutions, and provide indirect evidence of experience, previous performance, technological functionality and delivered customer value. They can also be leveraged internally to facilitate organisational learning and training, advance offering development, and motivate personnel. Major reference projects create new business opportunities and can be used as a vehicle for strategic change. The findings of the study shed light on the on going changing orientations in the project business environment, increase understanding of the variety of ways in which customer references can be deployed as marketing assets, and provide a framework of the relevant tasks and activities related to building, managing and leveraging a firm's customer reference portfolio. The findings contribute to the industrial marketing research, to the literature on marketing assets and capabilities and to the literature on projects and solutions. The proposed functions and mechanisms of customer reference marketing bring a more thorough and structured understanding about the essence and characteristics of the phenomenon and give a wide ranging view of the role of customer references as marketing assets for B to B firms. The study suggests several managerial implications for industrial suppliers in order to systematise customer reference marketing efforts.

Estudo de casos na formação de professores de química

Case studies were used as teaching methodology in Chemistry teacher education. The reffered methodology consists of teaching principles of Physical Chemistry associated to biodiesel theme in an undergraduate chemistry course with pre-service teachers, who are temporary teachers in high schools in Fortaleza, Ceará, Brazil. The results showed that the methodology was well accepted by the pre-service teachers. The concepts related to Chemistry, by means of multidisciplinary science, technological and social approaches make it able to overcome and improve the present situation in public schools and provided the learning of the chemistry concepts by high school students.

Produção de casos para o ensino de Química: uma experiência na formação inicial de professores

The Method of Case Studies has often been employed in higher education, but few initiatives have focused on basic education. This work addressed the production of cases by students from a chemistry teacher training course. The proposal was applied in the discipline of Basic Inorganic Chemistry and aimed to familiarize students with the Method from the preparation of cases focused on basic education. We believe the proposal was efficient in showing future teachers the need to develop teaching strategies that, beyond learning concepts, stimulate students in training skills such as teamwork, critical thinking and decision making.

Effect of forest-based biofuels production on carbon footprint, Case: Integrated LWC paper mill

International energy and climate strategies also set Finland’s commitments to increasing the use of renewable energy sources and reducing greenhouse gas emissions. The target can be achieved by, for example, increasing the use of energy wood. Finland’s forest biomass potential is significant compared with current use. Increased use will change forest management and wood harvesting methods however. The thesis examined the potential for integrated pulp and paper mills to increase bioenergy production. The effects of two bioenergy production technologies on the carbon footprint of an integrated LWC mill were studied at mill level and from the cradle-to-customer approach. The LignoBoost process and FT diesel production were chosen as bioenergy cases. The data for the LignoBoost process were obtained from Metso and for the FT diesel process from Neste Oil. The rest of the information is based on the literature and databases of the KCL-ECO life-cycle computer program and Ecoinvent. In both case studies, the carbon footprint was reduced. From the results, it can be concluded that it is possible to achieve a fossil-fuel-free pulp mill with the LignoBoost process. By using steam from the FT diesel process, the amount of auxiliary fuel can be reduced considerably and the bark boiler can be replaced. With a choice of auxiliary fuels for use in heat production in the paper mill and the production methods for purchased electricity, it is possible to affect the carbon footprints even more in both cases.

Tieto ja tietämyksenhallinta projektiympäristössä

Tämän tutkimuksen tavoitteena oli selvittää millaista tietoa sisältyy projektiympäristöön, sekä miten tietoa ja tietämystä projektiympäristössä voidaan hallita. Tutkimuksessa tarkasteltiin myös erilaisia tietämyksenhallinnan työkaluja, sekä tekijöitä jotka vaikuttavat tiedon- ja tietämyksenhallinnan onnistumiseen projektiympäristössä. Tutkimus oli tyypiltään kirjallisuustutkimus. Tutkimuksen tuloksia pyrittiin täydentämään kolmen case-esimerkin avulla, jotka oli poimittu kirjallisuudesta. Projektit sisältävät sekä dokumentoitua että inhimillistä tietoa. Tutkimus osoitti dokumentoinnin keskeisen merkityksen projektiympäristön tiedon- ja tietämyksenhallinnassa. Useat projektiympäristön tiedonhallinnan ongelmakohdat liittyvät tiedon luomiseen, oppimiseen ja jakamiseen. Tiedon- ja tietämyksenhallinnan työkalujen valintaan vaikuttavat mm. työympäristö, tiedon luonne ja projektiorganisaatio. Työkaluja ovat esimerkiksi sähköposti, videoneuvottelu, intranet ja tietokannat.

Teknologiansiirto vuorovaikutuksena yliopistojen ja yritysten välillä - Systemaattinen kirjallisuuskatsaus

Tutkielman tavoitteena oli selvittää teknologiansiirrosta vuorovaikutusnäkökulmasta tehdyt empiiriset tutkimukset systemaattisen kirjallisuuskatsauksen avulla. Teoreettinen näkökulma perustui vuorovaikutteisten innovaatioverkostojen rakentamista yliopistojen, yritysten ja valtion välille korostavaan Triple Helix -viitekehykseen. Valtion ohjaava rooli rajattiin tutkielman ulkopuolelle. Tutkimuskysymykset olivat miten teknologiansiirtoa on empiirisesti tutkittu yliopistojen ja yritysten välisenä vuorovaikutuksena, mitkä ovat yliopistojen ja yritysten väliset vuorovaikutusmuodot ja miten teknologiansiirtoa kannattaisi tutkia. Tutkimuksista koostuva aineisto hankittiin systemaattisella kirjallisuushaulla. Aineisto rajattiin teknologiansiirtoa vuorovaikutusnäkökulmasta tutkineisiin empiirisiin tutkimuksiin. Analysointimenetelmänä käytettiin sisällönanalyysiä. Tulosten perusteella teknologiansiirron tutkimisen teoreettisia lähestymistapoja olivat yrittäjyyssuuntautuneisuuteen yliopistoissa kannustava ”entrepreneurial university” -suuntaus, innovaatiot ja innovaatiojärjestelmät, tutkijoiden ominaisuudet ja sosiaalinen pääoma, vuorovaikutus- ja tiedonsiirtoprosessit, organisationaalinen oppiminen ja yliopiston teknologiansiirtopolitiikat. Teknologiansiirtoa oli tutkittu enemmän yliopisto- kuin yritysnäkökulmasta. Tutkimuksista puolet otti huomioon hiljaisen tiedon siirrettävyyden vain vuorovaikutuksen avulla. Tutkielman tuloksena tunnistettiin 34 erilaista vuorovaikutusmuotoa teknologiansiirrossa yliopistojen ja yritysten välillä. Tutkituimmat vuorovaikutusmuodot olivat patentit ja lisenssit, asiantuntija-apu ja konsultointi, epämuodolliset kontaktit ja verkostot, yliopistojen spin-off-yritykset ja sopimustutkimus. Tutkimusyhteistyötä oli tutkittu suhteellisen vähän. Teknologiansiirron tehokkuutta kannattaisi tutkia yritysnäkökulmasta selvittämällä tutkimusyhteistyön ja innovaatioiden välinen yhteys. Teknologiansiirtoa vuorovaikutusprosessina kannattaisi tutkia kaikkien siihen osallistuvien sidosryhmien näkökulmista. Teknologiansiirtoprojektien onnistumiseen vaikuttavia tekijöitä voisi selvittää vertailevien tapaustutkimusten avulla. Tiedonsiirtoprosessiin liittyvää vuorovaikutusta ei prosessina kannattaisi tutkia irrallisena ilmiönä siihen liittyvistä tiedonsiirto-olosuhteista. Vuorovaikutusmuotojen määrä suomalaisessa teknologiansiirrossa olisi tutkimisen arvoinen asia. Vuorovaikutusmuotojen lukumäärän selvittämisellä voisi arvioida yhteistyösuhteen syvyyttä yliopistojen ja yritysten välillä. Yritykset tulisi nähdä aktiivisina toimijoina teknologiansiirrossa, ja teknologiansiirtoa tulisi tutkia myös yritysten näkökulmasta.

Korttijärjestelmät osana tulonjakoa– Case S-ryhmä ja Kesko

Tutkimuksessa keskitytään osakeyhtiön ja osuuskunnan erilaisiin varainjakotapoihin ja korttijärjestelmien rooliin varainjaossa. Näkökulma tutkimukseen painottuu kuluttaja-omistajan perspektiiviin. Tutkimuksen tavoite on valottaa niitä eroja, joita osuuskunnan ja osakeyhtiön tulonjaossa on, ja kahden eri tapauksen, S-ryhmän ja Keskon, avulla tutkia korttijärjestelmien roolia tässä tulonjaossa.

Eleven som aktør i dialog med kunst : ungdoms erfaring med kunstundervisningens innhold og metode i faget kunst og håndverk i norsk grunnskole

Avhandlingen har sitt utspring i mitt engasjement for elevers møte med kunst i grunnskolen i faget kunst og håndverk og mitt syn på ungdom som kompetente bidragsytere til forskningen om fenomener som angår deres liv. Elevene er informanter til, eller aktører i, forskning på fenomenet dialog med kunst. Dialog med kunst er her definert som en helhetlig prosess som innlemmer alt fra elevenes møte med visuelle kunstverk til deres eget skapende arbeid. At avhandlingens fagdidaktiske problemområde er elevers praktisk skapende virksomhet, knytter undersøkelsen til slöjdpedagogisk forskning. Avhandlingens overgripende hensikt er å bidra til utvikling av fagdidaktikken i kunst og håndverk med utgangspunkt i elevenes erfaringer med kunstundervisningens innhold og metode på ungdomsskoletrinnet. Studien består av kasusstudier på to ungdomsskoler. Data ble innsamlet igjennom intervjuer, deltakende observasjon, dokumenter, prosessbøker og foto av formingsprodukter. Ungdoms dialog med kunst i skolen blir analysert og fremstilt ut fra et erfart og et operasjonalisert perspektiv. Funnene speiles i ulike fagdidaktiske tendenser, det vil si ulike hovedoppfatninger i debatten om det moderne samfunn, og i et virksomhetsteoretisk perspektiv. Resultatene fra undersøkelsen utfordrer oss til en fagdidaktisk nyorientering når det gjelder ungdoms møte med kunstverk i skolen, i retning av et mer ungdomskulturelt innhold og relasjonelle kunstmøter som er narrative, tolkningsorientert, opplevelsesorientert, dialogiske og flerstemmige. Undersøkelsen viser at elevene liker det praktisk skapende arbeidet, men at undervisningen i sterkere grad bør ta i bruk digital kunnskap og handle om hvordan kunst kan brukes som utgangspunkt for skapende arbeid, og den bør legge til rette for det læringspotensialet som ligger i dialogen elevene imellom. Elevene liker en undervisning som ikke bare handler om estetiske virkemidler, materialer og teknikker, men også om kommunikasjon og ytringsfrihet. Resultatene viser at det frie skapende arbeid består av tre likeverdige aspekter: det individuelle, det kulturelle og det sosiale. Både funnene og avhandlingens virksomhetsteoretiske perspektiv kan bidra til diskursen om kreativitetsbegrepet og identitetskonstruksjon i vårt moderne samfunn. Virksomhetssystemet blir i denne avhandlingen utviklet til en teori for skapende arbeid i faget kunst og håndverk, et overgripende fagdidaktisk rammeverk for bild/bildkonst og slöjdfaget satt inn i et nordisk utdanningsperspektiv.

Situational awareness concept in a multinational collaboration environment : challenges in the information sharing framework

Technological capabilities are built to support different types of collaboration, and this gives the justification to widely observe, how activity environments are influenced by technology. Technology as an enabler can be addressed from different perspectives, other than merely technological. Dynamic, evolving environment is at the same time interesting but also challenging. As a multinational collaboration environment, the maritime surveillance is an good example of time critical and evolving environment, where technological solutions enable new ways of collaboration. Justification for the inspiration to use maritime environment as the baseline for understanding the challenges in creating and maintaining adequate level of situational awareness, derives from the complexity of the collaboration and information sharing environment elements, needed to be taken into account, when analyzing criticalities related to decision making. Situational awareness is an important element supporting decision making, and challenges related to it can also be observed in the maritime environment. This dissertation describes the structures and factors involved in this complex setting, found from the case studies that should be taken into account when trying to understand, how these elements affect the activities. This dissertation focuses on the gray area that is between a life threatening situation and normal everyday activities. From the multinational experimentation series case studies, MNE5 and MNE6 it was possible to observe situations that were not life threatening for the participants themselves, but not also basic every day activities. These case studies provided a unique possibility to see situations, where gaining of situational awareness and decision making are challenged with time critical crisis situations. Unfortunately organizations do not normally take the benefit from the everyday work to prepare themselves for possible emerging crisis situations. This dissertation focuses on creating a conceptual model and a concept that supports organizations – also outside the maritime community – to improve their ability to support gaining of situational awareness from the individual training level, all the way to changes in organizational structures in aiming for better support for decision making from the individual level to the highest decision making level. Quick changes and unpredictability are reality in organizations and organizations do not have the possibility to control all the factors that affect their functioning. Since we cannot be prepared for everything, and predict every crisis, individual activities inside teams and as a part of organizations, need to be supported with guidance, tools and training in order to support acting in challenging situations. In fact the ideology of the conceptual model created, lies especially in the aim of not controlling everything in beforehand, but supporting organizations with concrete procedures to help individuals to react in different, unpredictable situations, instead of focusing on traditional risk prevention and management. Technological capabilities are not automatically solutions for functional challenges; this is why it is justified to broaden the problem area observation from the technological perspective. This dissertation demonstrates that it is possible to support collaboration in a multinational environment with technological solutions, but it requires the recognition of technological limitations and accepting the possible restrictions related to technological innovations. Technology should not be considered value per se, the value of technology should be defined according to the support of activities, including strategic and operational environment evaluation, identification of organizational elements, and taking into account also the social factors and their challenges. Then we are one step closer to providing technological solutions that support the actual activities by taking into account the variables of the activity environment in question. The multidisciplinary view to approach the information sharing and collaboration framework, is derived especially from the complexity of decision making and building of situational awareness, since they are not build or created in vacuity, but in the organizational framework by the people doing it with the technological capabilities, enabled by the organizational structures. Introduced case studies were related to maritime environment, but according to the research results, it is valid to argue, that based on the lessons learned it is possible to create and further develop conceptual model and to create a general concept to support a wider range of organizations in their attempt to gain better level of situational awareness (SA) and to support decision making. To proof the versatile usage of the developed concept, I have introduced the case study findings to the health care environment and reflected the identified elements from the trauma center to the created concept. The main contribution to complete this adventure is the presented situational awareness concept created in the respect to NATO concept structure. This has been done to tackle the challenge of collaboration by focusing on situational awareness in the information sharing context by providing a theoretical ground and understanding, of how these issues should be approached, and how these elements can be generalized and used to support activities in other environments as well. This dissertation research has been a several year evolving process reflecting and affecting presented case studies and this learning experience from the case studies has also affected the goals and research questions of this dissertation. This venture has been written from a retro perspective according to ideology of process modeling and design rationale to present to the reader how this entire journey took place and what where the critical milestones that affected the end result, conceptual model. Support in a challenging information sharing framework can be provided with the right type of combination of tools, procedures and individual effort. This dissertation will provide insights to those with a new approach to war technology for the organizations to gain a better level of awareness and to improve the capabilities in decision making. This dissertation will present, from the war technology starting point, a new approach and possibility for the organizations to create a better level of awareness and support for decision making with the right combination of tools, procedures and individual effort.

Utilization of Statistical Methods for Management in the Forest Industry

The strongest wish of the customer concerning chemical pulp features is consistent, uniform quality. Variation may be controlled and reduced by using statistical methods. However, studies addressing the application and benefits of statistical methods in forest product sector are scarce. Thus, the customer wish is the root cause of the motivation behind this dissertation. The research problem addressed by this dissertation is that companies in the chemical forest product sector require new knowledge for improving their utilization of statistical methods. To gain this new knowledge, the research problem is studied from five complementary viewpoints – challenges and success factors, organizational learning, problem solving, economic benefit, and statistical methods as management tools. The five research questions generated on the basis of these viewpoints are answered in four research papers, which are case studies based on empirical data collection. This research as a whole complements the literature dealing with the use of statistical methods in the forest products industry. Practical examples of the application of statistical process control, case-based reasoning, the cross-industry standard process for data mining, and performance measurement methods in the context of chemical forest products manufacturing are brought to the public knowledge of the scientific community. The benefit of the application of these methods is estimated or demonstrated. The purpose of this dissertation is to find pragmatic ideas for companies in the chemical forest product sector in order for them to improve their utilization of statistical methods. The main practical implications of this doctoral dissertation can be summarized in four points: 1. It is beneficial to reduce variation in chemical forest product manufacturing processes 2. Statistical tools can be used to reduce this variation 3. Problem-solving in chemical forest product manufacturing processes can be intensified through the use of statistical methods 4. There are certain success factors and challenges that need to be addressed when implementing statistical methods

Aging policy: a case study of co-ordination in Canadian governments

ABSTRACT Canada is an aging society. The number of people aged sixty-five and over is rising, while the number of people under twenty is declining. These two concurrent changes in the age structure have produced a sh~ft in the demographic composition of Canada which is commonly referred to as the aging phenomenon. Regardless of whether or not the number of people under twenty continues to decline, the number of elderly in Canada will almost double over the next twenty years. This rapidly growing elderly clientele will doubtless have an impact on Canadian governments. Federal, provincial and municipal governments are presently providing a variety of programs that have a special bearing on the aged and most senior citizens are beneficiaries of one or more of these programs. The ramifications of a rapidly growing elderly clientele are obvious. In order to cope with the impact of a significant increase in the number of elderly persons, the development and implementation of aging policy must be co-ordinated at each level of government and between and among levels of government. If aging policy is not co-ordinated, the results are likely to be: inappropriate policy decisions; duplication and overlap; and, ineffective and irresponsive services. No one benefits from these results. The need for co-ordination is apparent. The purpose of this thesis is to examine existing governmental efforts to co-ordinate policy in the field of aging. These efforts are examined by focusing on interactions directed at co-ordination between and among major actors in aging policy. A framework is used to structure the description and analysis of these interactions. The variables of formalisation and intensity and the concept of power are instrumental in analysing interactions for co-ordination. The underlying intent of this thesis is to discover some of the main gaps in existing governmental efforts to co~ordinate aging policy. Gaps are, in fact, discovered. Several explanations for the existence of gaps in interactions for co-ordination are discussed. A major hypothesis involving a relationship between a bureaucratic form of organisation and interactions for coordination is suggested. Finally, three recommendations for improving co-ordination in aging policy are offered.

A Study of role conflict, role ambiguity, locus of control, job satisfaction and participation in decision making among front-line vocational service workers for mentally retarded adults

This study was an investigation of individual and organizational factors, as perceived by front-line vocational service workers from Adult Rehabilitation Centres (ARC Industries) for mentally retarded adults. The specific variables which were measured included role conflict/role ambiguity (role factors), internal/external locus of control (individual differences), job satisfaction with work and supervision (job attitudes) and participation in deci~ion making (organizational factor). The exploration of these constructs was conducted by means of self-report questionnaires which were completed by sixty-nine out of a total of ninety front-line employees. The surveys were distributed in booklet form to nine distinct rehabilitation facilities from St. Catharines, West Lincoln, Greater Niagara, Port Colborne, WeIland, Fort Erie, Hamilton, Guelph and Brantford. The survey data was evaluated by the statisti.cal Package for the Social Sciences (SPSS) which used the Pearson Product Moment Correlation procedure and a compar~son of means test. A comparison of correlation coefficients test was also conducted. This statistical procedure was calculated mathematically. The results obtained from the statistical evaluation confirmed the prediction that self-reported measures of participation in decision making and satisfaction (work and supervision) would be negatively correlated with role conflict and role ambiguity. As well, the speculation that perceived satisfaction (work and supervision) would be positively correlated with participation in decision making was empirically supported. Internal and external locus of control did not contribute to a significant difference in r~sponses to role perceptions (conflict and ambiguity) , satisfaction (work and supervision) or the correlational relationship between participation in decision making and satisfaction (work and supervision). Overall, the findings from this study substantiated the importance of examining employee perceptions in the workplace and the interrelationships among individual and organizational variables. This research was considered a contribution to the general area of occupational stress and to the study of individuals in work organizations.