Identification of pharmaceutical tablets by Raman spectroscopy and chemometrics

Raman spectroscopy has become an attractive tool for the analysis of pharmaceutical solid dosage forms. In the present study it is used to ensure the identity of tablets. The two main applications of this method are release of final products in quality control and detection of counterfeits. Twenty-five product families of tablets have been included in the spectral library and a non-linear classification method, the Support Vector Machines (SVMs), has been employed. Two calibrations have been developed in cascade: the first one identifies the product family while the second one specifies the formulation. A product family comprises different formulations that have the same active pharmaceutical ingredient (API) but in a different amount. Once the tablets have been classified by the SVM model, API peaks detection and correlation are applied in order to have a specific method for the identification and allow in the future to discriminate counterfeits from genuine products. This calibration strategy enables the identification of 25 product families without error and in the absence of prior information about the sample. Raman spectroscopy coupled with chemometrics is therefore a fast and accurate tool for the identification of pharmaceutical tablets.

És possible realitzar una RCP de qualitat durant 10 minuts?

El que ens plantegem en aquest estudi és donar resposta a la pregunta de si un reanimador és capaç de realitzar una RCP durant 10 minuts sense esgotar-se independentment de les sevescaracterístiques físiques. Es valora l’interval de 10 minuts ja que és el temps mitjà de resposta del servei d’emergències mèdiques de Catalunya per arribar al lloc de l’urgència

Two methods for voltage sag source location

This paper presents and compares two approaches to estimate the origin (upstream or downstream) of voltage sag registered in distribution substations. The first approach is based on the application of a single rule dealing with features extracted from the impedances during the fault whereas the second method exploit the variability of waveforms from an statistical point of view. Both approaches have been tested with voltage sags registered in distribution substations and advantages, drawbacks and comparative results are presented

A survey on voltage sag events in power systems

This paper aims to survey the techniques and methods described in literature to analyse and characterise voltage sags and the corresponding objectives of these works. The study has been performed from a data mining point of view

Classification of sags according to their origin based on the waveform similarity

A statistical method for classification of sags their origin downstream or upstream from the recording point is proposed in this work. The goal is to obtain a statistical model using the sag waveforms useful to characterise one type of sags and to discriminate them from the other type. This model is built on the basis of multi-way principal component analysis an later used to project the available registers in a new space with lower dimension. Thus, a case base of diagnosed sags is built in the projection space. Finally classification is done by comparing new sags against the existing in the case base. Similarity is defined in the projection space using a combination of distances to recover the nearest neighbours to the new sag. Finally the method assigns the origin of the new sag according to the origin of their neighbours

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification

Pulmonary hypertension in Switzerland: treatment and clinical course.

The prognosis of pulmonary hypertension (PH), especially idiopathic pulmonary arterial hypertension (IPAH), has improved during the recent years. The Swiss Registry for PH represents the collaboration of the various centres in Switzerland dealing with PH and serves as an important tool in quality control. The objective of the study was to describe the treatment and clinical course of this orphan disease in Switzerland. We analyzed data from 222 of 252 adult patients, who were included in the registry between January 1999 and December 2004 and suffered from either PAH, PH associated with lung diseases or chronic thromboembolic PH (CTEPH) with respect to the following data: NYHA class, six-minute walking distance (6-MWD), haemodynamics, treatments and survival. If compared with the calculated expected figures the one, two and three year mean survivals in IPAH increased from 67% to 89%, from 55% to 78% and from 46% to 73%, respectively. Most patients (90%) were on oral or inhaled therapy and only 10 patients necessitated lung transplantation. Even though pulmonary endarterectomy (PEA) was performed in only 7 patients during this time, the survival in our CTEPH cohort improved compared with literature data and seems to approach outcomes usually seen after PEA. The 6-MWD increased maximally by 52 m and 59 m in IPAH and CTEPH, respectively, but in the long term returned to or below baseline values, despite the increasing use of multiple specific drugs (overall in 51% of IPAH and 29% of CTEPH). Our national registry data indicate that the overall survival of IPAH and presumably CTEPH seems to have improved in Switzerland. Although the 6-MWD improved transiently, it decreased in the long term despite specific and increasingly combined drug treatment. Our findings herewith underscore the progressive nature of the diseases and the need for further intense research in the field.

Probabilistic base calling of Solexa sequencing data.

BACKGROUND: Solexa/Illumina short-read ultra-high throughput DNA sequencing technology produces millions of short tags (up to 36 bases) by parallel sequencing-by-synthesis of DNA colonies. The processing and statistical analysis of such high-throughput data poses new challenges; currently a fair proportion of the tags are routinely discarded due to an inability to match them to a reference sequence, thereby reducing the effective throughput of the technology. RESULTS: We propose a novel base calling algorithm using model-based clustering and probability theory to identify ambiguous bases and code them with IUPAC symbols. We also select optimal sub-tags using a score based on information content to remove uncertain bases towards the ends of the reads. CONCLUSION: We show that the method improves genome coverage and number of usable tags as compared with Solexa's data processing pipeline by an average of 15%. An R package is provided which allows fast and accurate base calling of Solexa's fluorescence intensity files and the production of informative diagnostic plots.

Assentar els fonaments per a implantar un sistema d’assegurament intern de la qualitat en el Departament d’Arquitectura de Computadors

La gestió de la qualitat aplicada a les administracions públiques forma part del estat de la organització i del seu entorn, així com de la demanda de la societat. La organització doncs, ha de vetllar per a aconseguir la millora contínua i encetar el camí de la excel.lència. Aquest projecte que presento informa de la situación actual respecte de la gestió en el Departament d’Arquitectura de Computadors tenint en compte tots els seus àmbits competencials. La finalitat és establir una estratègia orientada a resultats per tal de donar resposta a les expectatives dels seus membres i als usuaris potencials de tal forma que permeti garantir els serveis oferts.

Intraoperative assessment of vascular access.

PURPOSE: The intraoperative quality assessment of the arteriovenous fistula for hemodialysis is an essential process to limit early failure due to technical problems or inadequate vascular quality. This step is not clearly defined in the literature with no recommendations. METHODS: We selected published articles related to the topic of intraoperative quality control of the vascular access for hemodialysis. RESULTS: The intraoperative blood flow measurement greater than 120 ml/min in autologous fistula and less than 320 ml/min in arteriovenous graft was described as predictive factors for early failure. CONCLUSIONS: The blood flow measurement should be performed after the confection of the anastomosis. When blood flow is limited, fistulography is an essential step to assess patency.

Cross-cultural adaptations of the Oxford-12 HIP score to the French speaking population.

BACKGROUND: An objective measurement of surgical procedures outcomes is inherent to professional practices quality control; this especially applies in orthopaedics to joint replacement outcomes. A self-administered questionnaire offers an attractive alternative to surgeon's judgement but is infrequently used in France for these purposes. The British questionnaire, the 12-item Oxford Hip Score (OHS) was selected for this study because of its ease of use. HYPOTHESIS: The objective of this study was to validate the French translation of the self-assessment 12-item Oxford Hip Score and compare its results with those of the reference functional scores: the Harris Hip Score (HHS) and the Postel-Merle d'Aubigné (PMA) score. MATERIALS AND METHODS: Based on a clinical series of 242 patients who were candidates for total hip arthroplasty, the French translation of this questionnaire was validated. Its coherence was also validated by comparing the preoperative data with the data obtained from the two other reference clinical scores. RESULTS: The translation was validated using the forward-backward translation procedure from French to English, with correction of all differences or mistranslations after systematized comparison with the original questionnaire in English. The mean overall OHS score was 43.8 points (range, 22-60 points) with similarly good distribution of the overall value of the three scores compared. The correlation was excellent between the OHS and the HHS, but an identical correlation between the OHS and the PMA was only obtained for the association of the pain and function parameters, after excluding the mobility criterion, relatively over-represented in the PMA score. DISCUSSION AND CONCLUSION: Subjective questionnaires that contribute a personal appreciation of the results of arthroplasty by the patient can easily be applied on a large scale. This study made a translated and validated version of an internationally recognized, reliable self-assessment score available to French orthopaedic surgeons. The results obtained encourage us to use this questionnaire as a complement to the classical evaluation scores and methods.

FGF21 signalling pathway and metabolic traits - genetic association analysis.

Fibroblast growth factor 21 (FGF21) is a novel master regulator of metabolic profile. The biological actions of FGF21 are elicited upon its klotho beta (KLB)-facilitated binding to FGF receptor 1 (FGFR1), FGFR2 and FGFR3. We hypothesised that common polymorphisms in the FGF21 signalling pathway may be associated with metabolic risk. At the screening stage, we examined associations between 63 common single-nucleotide polymorphisms (SNPs) in five genes of this pathway (FGF21, KLB, FGFR1, FGFR2, FGFR3) and four metabolic phenotypes (LDL cholesterol - LDL-C, HDL-cholesterol - HDL-C, triglycerides and body mass index) in 629 individuals from Silesian Hypertension Study (SHS). Replication analyses were performed in 5478 unrelated individuals of the Swiss CoLaus cohort (imputed genotypes) and in 3030 directly genotyped individuals of the German Myocardial Infarction Family Study (GerMIFS). Of 54 SNPs that met quality control criteria after genotyping in SHS, 4 (rs4733946 and rs7012413 in FGFR1; rs2071616 in FGFR2 and rs7670903 in KLB) showed suggestive association with LDL-C (P=0.0006, P=0.0013, P=0.0055, P=0.011, respectively) and 1 (rs2608819 in KLB) was associated with body mass index (P=0.011); all with false discovery rate q<0.5. Of these, only one FGFR2 polymorphism (rs2071616) showed replicated association with LDL-C in both CoLaus (P=0.009) and men from GerMIFS (P=0.017). The direction of allelic effect of rs2071616 upon LDL-C was consistent in all examined populations. These data show that common genetic variations in FGFR2 may be associated with LDL-C in subjects of white European ancestry.

Identificació de marcadors biològics amb potencial per a l’optimització sensorial i tecnològica de la carn de porc i pernil curat

L’aplicació de tecnologies innovadores per a l’anàlisi de la qualitat (proteòmica) i per al processat de productes carnis (envasament actiu i altes pressions hidrostàtiques) amb la finalitat d’optimitzar la qualitat i la seguretat de productes carnis llestos per al consum fou evaluat. Els resultats obtinguts amb l’anàlisi proteòmic van permetre la detecció de pèptids/ proteïnes candidats a marcadors proteics de la qualitat dels lloms i dels pernils. La detecció d’aquests marcadors a la matèria primera (llom i pernil fresc) ajudaria a predir la qualitat final dels productes carnis processats (llom cuit i pernil curat), i proporcionaria una eina per al control de la qualitat de la carn de porc. No obstant, la validació del paper d’aquestes proteïnes a la qualitat final dels productes carnis és necessària abans de poder-los considerar marcadors proteics. Per altra banda, es va estudiar la possiblitat de millorar la seguretat alimentària de llonganissa sense sal afegida obtinguda amb el procés QDS® process a través l’ús de tecnologies innovadores (envasament actiu i altes pressions hidrostàtiques). La llonganissa sense sal afegida no va permetre el creixement de L. monocytogenes. No obstant, el patogen seria capaç de sobreviure durant la vida útil del producte en cas de recontaminació. L’envasament antimicrobià amb la inclusió de nisina com a antimicrobià natural es pot considerar un mètode efectiu per a millorar la seguretat de la llonganissa estudiada. L. monocytogenes va sobreviure al tractament d’alta pressió hidrostàtica (600 MPa, 5 min, 12ºC) gràcies a les característiques del producte de baixa activitat d’aigua i presència de lactat a la seva formulació. Per aquest motiu, la APH no es consideraria un tractament apropiat per a reduir la presència de L. monocytogenes en aquest tipus de producte.

Synthesis of Nondestructive Testing Technologies for Geomaterial Applications, May 2005

Current monitoring techniques for determination of compaction of earthwork and asphalt generally involve destructive testing of the materials following placement. Advances in sensor technologies show significant promise for obtaining necessary information through nondestructive and remote techniques. To develop a better understanding of suitable and potential technologies, this study was undertaken to conduct a synthesis review of nondestructive testing technologies and perform preliminary evaluations of selected technologies to better understand their application to testing of geomaterials (soil fill, aggregate base, asphalt, etc.). This research resulted in a synthesis of potential technologies for compaction monitoring with a strong emphasis on moisture sensing. Techniques were reviewed and selectively evaluated for their potential to improve field quality control operations. Activities included an extensive review of commercially available moisture sensors, literature review, and evaluation of selected technologies. The technologies investigated in this study were dielectric, nuclear, near infrared spectroscopy, seismic, electromagnetic induction, and thermal. The primary disadvantage of all the methods is the small sample volume measured. In addition, all the methods possessed some sensitivity to non-moisture factors that affected the accuracy of the results. As the measurement volume increases, local variances are averaged out providing better accuracy. Most dielectric methods with the exception of ground penetrating radar have a very small measurement volume and are highly sensitive to variations in density, porosity, etc.