Conceptualising cosmopolitanism and entrepreneurship through the lens of the three-dimensional theory of power

Purpose – The paper aims to conceptualise cosmopolitanism drivers from the third-level power perspective by drawing on Lukes’ (1974; 2005) theory of power. In addition, the paper aims to investigate the relationship between entrepreneurs’ cosmopolitan dispositions and habitus, i.e. a pattern of an individual’s demeanour, as understood by Bourdieu. Design/methodology/approach – This conceptual paper makes use of Bourdieu’s framework (habitus) by extending it to the urban cosmopolitan environment and linking habitus to the three-dimensional theory of power and, importantly, to the power’s third dimension – preference-shaping. Findings – Once cosmopolitanism is embedded in the urban area’s values, this creates multiple endless rounds of mutual influence (by power holders onto entrepreneurs via political and business elites, and by entrepreneurs onto power holders via the same channels), with mutual benefit. Therefore, mutually beneficial influence that transpires in continuous support of a cosmopolitan city’s environment may be viewed as one of the factors that enhances cosmopolitan cities’ resilience to changes in macroeconomic conditions. Originality/value – The paper offers a theoretical model that enriches the understanding of the power-cosmopolitanism-entrepreneurship link, by emphasising the preference-shaping capacity of power, which leads to the embedment of cosmopolitanism in societal values. As a value shared by political and business elites, cosmopolitanism is also actively promoted by entrepreneurs through their disposition and habitus. This ensures not only their willing compliance with power and the environment, but also their enhancement of favourable business conditions. Entrepreneurs depart from mere acquiescence (to power and its explicit dominance), and instead practice their cosmopolitan influence by active preference-shaping.

Sasakian quiver gauge theories and instantons on cones over lens 5-spaces

We consider SU(3)-equivariant dimensional reduction of Yang Mills theory over certain cyclic orbifolds of the 5-sphere which are Sasaki-Einstein manifolds. We obtain new quiver gauge theories extending those induced via reduction over the leaf spaces of the characteristic foliation of the Sasaki-Einstein structure, which are projective planes. We describe the Higgs branches of these quiver gauge theories as moduli spaces of spherically symmetric instantons which are SU(3)-equivariant solutions to the Hermitian Yang-Mills equations on the associated Calabi-Yau cones, and further compare them to moduli spaces of translationally-invariant instantons on the cones. We provide an explicit unified construction of these moduli spaces as Kahler quotients and show that they have the same cyclic orbifold singularities as the cones over the lens 5-spaces. (C) 2015 The Authors. Published by Elsevier B.V.

Building digital capability: Employability lens on the Six Elements of Digital Capability

This is a version of the Jisc ‘Six Elements of Digital Capabilities’ model, developed to support student-facing sta working in Careers and Employability roles and curriculum sta working to embed employability issues into the curriculum. It draws on the work of the Jisc Developing Student Employability project e.g. on the model of the ‘employable student’ produced by Peter Chatterton for that project.

Rapid hydrothermal cooling above the axial melt lens at fast-spreading mid-ocean ridge

Axial melt lenses sandwiched between the lower oceanic crust and the sheeted dike sequences at fast-spreading mid-ocean ridges are assumed to be the major magma source of oceanic crust accretion. According to the widely discussed "gabbro glacier'' model, the formation of the lower oceanic crust requires efficient cooling of the axial melt lens, leading to partial crystallization and crystal-melt mush subsiding down to lower crust. These processes are believed to be controlled by periodical magma replenishment and hydrothermal circulation above the melt lens. Here we quantify the cooling rate above melt lens using chemical zoning of plagioclase from hornfelsic recrystallized sheeted dikes drilled from the East Pacific at the Integrated Ocean Drilling Program Hole 1256D. Weestimate the cooling rate using a forward modelling approach based on CaAl-NaSi interdiffusion in plagioclase. The results show that cooling from the peak thermal overprint at 1000-10506 degrees C to 6006 degrees C are yielded within about 10-30 years as a result of hydrothermal circulation above melt lens during magma starvation. The estimated rapid hydrothermal cooling explains how the effective heat extraction from melt lens is achieved at fast-spreading mid-ocean ridges.

The outset of mental torture. Through the lens of the Ticking Time Bomb Scenario

No doubt shall be placed when qualifying torture as one of the cruellest crime offences against human beings. It is widely known that the first torture practices go back to the Middle Ages, where torture mechanisms and devices were used as a legitimate means of punishment, extraction of confessions or executions. Brutal techniques such as ‘Judas Cradle’, ‘The Rack’ or the ‘Rat Torture’ were indeed, the ones commonly used. Moreover, some centuries onwards, torture warrants were permitted and authorised by Privy Councils in legislations such as the English one. However, examples like that were the only ones which public accountability was given to, whereas off-the-book practices remained in silence in other countries for long lasting years. Nowadays, in the 21st century, there are innumerable enforced laws and provisions that prohibit the act of torture, to be precise, physical and psychological torture. Nonetheless, not only are these legislations necessary for fighting torture, but also ad hoc courts and specialised committees continuously report the existence of this crime offence.

Biomimetic accommodating intraocular lens

The crystalline lens allows the eye to focus on near and far objects. During the aging process, it loses its ability to focus and often becomes cloudy during cataract formation. At this point, traditional medical therapy replaces the lens with an artificial replacement lens. Although replacement lenses for the crystalline lens have been implanted since 1949 for cataract surgery, none of the FDA-approved lenses mimic the anatomy of the natural lens. Hence, they are not able to focus in a manner similar to the youthful lens. Instead, they function in a manner similar to the aged lens and only provide vision at a single distance or at a very limited range of focal distances. Patients with the newest implants are often obliged to use reading glasses when using near vision, or suffer from optical aberrations, halos, or glare. Therefore, there is a need to provide youthful vision after lens surgery in terms of focusing ability, accurate optical power, and sharp focus without distortion or optical aberrations.

This thesis presents an approach to restoring youthful vision after lens replacement. An intraocular lens (IOL) that can provide accurate visual acuity along with focusing ability is proposed. This IOL relies on the natural anatomy and physiology of the eye, and therefore is actuated in a manner identical to the natural lens. In addition, the lens has the capability for adjustment during or after implantation to provide high-acuity vision throughout life.

The natural anatomy and physiology of the eye is described, along with lens replacement surgery. A lens design is proposed to address the unmet need of lens-replacement patients. Specific care in the design is made for small surgical incisions, high visual acuity, adjustable acuity over years, and the ability to focus similar to the natural lens. Methods to test the IOL using human donor tissue are developed based upon prior experiments on the ex vivo natural lens. These tools are used to demonstrate efficacy of the newly developed accommodating intraocular lens.

To further demonstrate implant feasibility, materials and processes for building the lens are evaluated for biocompatibility, endurance, repeatable manufacture, and stability. The lens biomechanics are determined after developing an artificial anatomy testing setup inspired by the natural anatomy of the human focusing mechanism. Finally, based upon a mechanical and optical knowledge of the lens, several improved lens concepts are proposed and demonstrated for efficacy.

Analyzing Tidal Fluctuations in the Big Pine Key Freshwater Lens with Time-Lapse Resistivity

The tidal influence on the Big Pine Key saltwater/freshwater interface was analyzed using time-lapse electrical resistivity imaging and shallow well measurements. The transition zone at the saltwater/freshwater interface was measured over part of a tidal cycle along three profiles. The resistivity was converted to salinity by deriving a formation factor for the Miami Oolite. A SEAWAT model was created to attempt to recreate the field measurements and test previously established hydrogeologic parameters. The results imply that the tide only affects the groundwater within 20 to 30 m of the coast. The effect is small and caused by flooding from the high tide. The low relief of the island means this effect is very sensitive to small changes in the magnitude. The SEAWAT model proved to be insufficient in modeling this effect. The study suggests that the extent of flooding is the largest influence on the salinity of the groundwater.

Long-term efficacy of orthokeratology contact lens wear in controlling the progression of childhood myopia

Purpose: The primary outcome of this study is to compare the axial length growth of white European myopic children wearing orthokeratology contact lenses (OK) to a control group (CT) over a 7-year period. Methods: Subjects 6–12 years of age with myopia −0.75 to −4.00DS and astigmatism ≤1.00DC were prospectively allocated OK or distance single-vision spectacles (SV) correction. Measurements of axial length (Zeiss IOLMaster), corneal topography, and cycloplegic refraction were taken at 6-month intervals over a 2-year period. Subjects were invited to return to the clinic approximately 5 years later (i.e., 7 years after the beginning of the study) for assessment of their ocular refractive and biometric components. The CT consisted of 4 SV and 12 subjects who switched from SV to soft contact lens wear after the initial 2 years of SV lens wear. Changes in axial length relative to baseline over a 7-year period were compared between groups. Results: Fourteen and 16 subjects from the OK and CT groups, respectively, were examined 6.7 ± 0.5 years after the beginning of the study. Statistically significant changes in the axial length were found over time and between groups (both p <0.001), but not for the time*group interaction (p = 0.125). The change in the axial length for the OK group was 22% (p = 0.328), 42% (p = 0.007), 40% (p = 0.020), 41% (p = 0.013), and 33% (p = 0.062) lower than the CT group following 6, 12, 18, 24, and 84 months of lens wear, respectively. Conclusion: A trend toward a reduction in the rate of axial elongation of the order of 33% was found in the OK group in comparison to the CT group following 7 years of lens wear.

Visual outcomes after bilateral trifocal diffractive intraocular lens implantation

Background In recent years new models of intraocular lenses are appearing on the market to reduce requirements for additional optical correction. The purpose of this study is to assess visual outcomes following bilateral cataract surgery and the implant of a FineVision® trifocal intraocular lens (IOL). Methods Prospective, nonrandomized, observational study. Vision was assessed in 44 eyes of 22 patients (mean age 68.4 ± 5.5 years) before and 3 months after surgery. Aberrations were determined using the Topcon KR-1 W wave-front analyzer. LogMAR visual acuity was measured at distance (corrected distance visual acuity, CDVA 4 m), intermediate (distance corrected intermediate visual acuity, DCIVA 60 cm) and near (distance corrected near visual acuity, DCNVA 40 cm). The Pelli-Robson letter chart and the CSV-1000 test were used to estimate contrast sensitivity (CS). Defocus curve testing was performed in photopic and mesopic conditions. Adverse photic phenomena were assessed using the Halo v1.0 program. Results Mean aberration values for a mesopic pupil diameter were: total HOA RMS: 0.41 ± 0.30 μm, coma: 0.32 ± 0.22 μm and spherical aberration: 0.21 ± 0.20 μm. Binocular logMAR measurements were: CDVA −0.05 ± 0.05, DCIVA 0.15 ± 0.10, and DCNVA 0.06 ± 0.10. Mean Pelli-Robson CS was 1.40 ± 0.14 log units. Mean CSV100 CS for the 4 frequencies examined (A: 3 cycles/degree (cpd), B: 6 cpd, C: 12 cpd, D: 18 cpd) were 1.64 ± 0.14, 1.77 ± 0.18, 1.44 ± 0.24 and 0.98 ± 0.24 log units, respectively. Significant differences were observed in defocus curves for photopic and mesopic conditions (p < 0.0001). A mean disturbance index of 0.28 ± 0.22 was obtained. Conclusions Bilateral FineVision IOL implant achieved a full range of adequate vision, satisfactory contrast sensitivity, and a lack of significant adverse photic phenomena. Trial registration Eudract Clinical Trials Registry Number: 2014-003266-2.

New evidence for the zoom lens model using the RSVP technique

A main prediction from the zoom lens model for visual attention is that performance is an inverse function of the size of the attended area. The "attention shift paradigm" developed by Sperling and Reeves (1980) was adapted here to study predictions from the zoom lens model. In two experiments two lists of items were simultaneously presented using the rapid serial visual presentation technique. Subjects were to report the first item he/she was able to identify in the series that did not include the target (the letter T) after he/she saw the target. In one condition, subjects knew in which list the target would appear, in another condition, they did not have this knowledge, having to attend to both positions in order to detect the target. The zoom lens model predicts an interaction between this variable and the distance separating the two positions where the lists are presented. In both experiments, this interaction was observed. The results are also discussed as a solution to the apparently contradictory results with regard to the analog movement model.

ESL teacher profiles of ICT integration in their classroom practices and assessment activities : a portrait viewed through the lens of some Quebec teachers’ social representations

Abstract : Information and communication technologies (ICTs, henceforth) have become ubiquitous in our society. The plethora of devices competing with the computer, from iPads to the Interactive whiteboard, just to name a few, has provided teachers and students alike with the ability to communicate and access information with unprecedented accessibility and speed. It is only logical that schools reflect these changes given that their purpose is to prepare students for the future. Surprisingly enough, research indicates that ICT integration into teaching activities is still marginal. Many elementary and secondary schoolteachers are not making effective use of ICTs in their teaching activities as well as in their assessment practices. The purpose of the current study is a) to describe Quebec ESL teachers’ profiles of using ICTs in their daily teaching activities; b) to describe teachers’ ICT integration and assessment practices; and c) to describe teachers’ social representations regarding the utility and relevance of ICT use in their daily teaching activities and assessment practices. In order to attain our objectives, we based our theoretical framework, principally, on the social representations (SR, henceforth) theory and we defined most related constructs which were deemed fundamental to the current thesis. We also collected data from 28 ESL elementary and secondary school teachers working in public and private sectors. The interview guide used to that end included a range of items to elicit teachers’ SR in terms of ICT daily use in teaching activities as well as in assessment practices. In addition, we carried out our data analyses from a textual statistics perspective, a particular mode of content analysis, in order to extract the indicators underlying teachers’ representations of the teachers. The findings suggest that although almost all participants use a wide range of ICT tools in their practices, ICT implementation is seemingly not exploited to its fullest potential and, correspondingly, is likely to produce limited effects on students’ learning. Moreover, none of the interviewees claim that they use ICTs in their assessment practices and they still hold to the traditional paper-based assessment (PBA, henceforth) approach of assessing students’ learning. Teachers’ common discourse reveals a gap between the positive standpoint with regards to ICT integration, on the one hand, and the actual uses of instructional technology, on the other. These results are useful for better understanding the way ESL teachers in Quebec currently view their use of ICTs, particularly for evaluation purposes. In fact, they provide a starting place for reconsidering the implementation of ICTs in elementary and secondary schools. They may also be useful to open up avenues for the development of a future research program in this regard.