672 resultados para Kroesen, Justin E. A
Resumo:
Acknowledgment MN's PhD scholarship was provided by Ministry of Health and Medical Education (Islamic Republic of Iran). This study was funded by the University of Aberdeen. FFS is funded by Fuse, the UK Clinical Research Collaboration Centre of Excellence for Translational Research in Public Health. The researchers gratefully acknowledge all the Type 2 diabetic patients and their household members who participated in the study for their contribution to this study; without them there would be no data. The researchers gratefully acknowledge the SDRN for providing the list of Type 2 diabetes and helping for sampling.
Resumo:
Peer reviewed
Resumo:
Acknowledgment MN's PhD scholarship was provided by Ministry of Health and Medical Education (Islamic Republic of Iran). This study was funded by the University of Aberdeen. FFS is funded by Fuse, the UK Clinical Research Collaboration Centre of Excellence for Translational Research in Public Health. The researchers gratefully acknowledge all the Type 2 diabetic patients and their household members who participated in the study for their contribution to this study; without them there would be no data. The researchers gratefully acknowledge the SDRN for providing the list of Type 2 diabetes and helping for sampling.
Moving to Capture Children's Attention : Developing a Methodology for Measuring Visuomotor Attention
Resumo:
Funding: Authors LH and MMW are part of the Healthy Children, Healthy Families Theme of the National Institute of Health Research (NIHR) Collaboration for Leadership in Applied Health Research and Care (CLAHRC) Yorkshire and Humber (www.clahrc-yh.nihr.ac.uk/). Please note, the views expressed are those of the authors and not necessarily those of the National Health Service, the NIHR and the Department of Health. At different points in time this programme of research has been supported by a Medical Research Council (MRC; www.mrc.ac.uk) scholarship, an MRC Centenary Early Career Award and a grant from The Waterloo Foundation (TWF reference: 1285/1986; www.waterloofoundation.org.uk/). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Resumo:
ACKNOWLEDGEMENTS We thank the Governor of Svalbard for permission to undertaker the research. We are especially grateful to Steve Coulson, and the logistical and technical staff at the University Centre in Svalbard (UNIS) for supporting the field campaigns. The data collection would not have been possible without the contribution of numerous field assistants, including veterinary students from the Norwegian School of Veterinary Science. Statistical advice was provided by Mark Brewer and David Elston, BioSS. The work was supported mainly by grants from U.K. Natural Environment Research Council the Norwegian Research Council, and the Macaulay Development Trust. Additional financial support has come from the Amundsen Foundation, Centre for Ecology and Hydrology, The Macaulay Institute, the NINA, UNIS, and the Norwegian School of Veterinary Science
Resumo:
Réalisé en milieu collégial (cégep)
Patient/carers' recollection of medicines related information from an out-patient clinic appointment
Resumo:
AIM: To identify what medicines related information children/young people or their parents/carers are able to recall following an out-patient clinic appointment. METHOD: A convenience sample of patients' prescribed at least one new long-term (>6 weeks) medicine were recruited from a single UK paediatric hospital out-patient pharmacy. A face-to-face semi-structured questionnaire was administered to participants when they presented with their prescription. The questionnaire included the following themes: names of the medicines, therapeutic indication, dose regimen, duration of treatment and adverse effects.The results were analysed using Microsoft Excel 2013. RESULTS: One hundred participants consented and were included in the study. One hundred and forty-five medicines were prescribed in total. Participants were able to recall the names of 96 (66%) medicines and were aware of the therapeutic indication for 142 (97.9%) medicines. The dose regimen was accurately described for 120 (82.8%) medicines with the duration of treatment known for 132 (91%). Participants mentioned that they had been advised about side effects for 44 (30.3%) medicines. Specific counselling points recommended by the BNFc1, were either omitted or not recalled by participants for the following systemic treatments: cetirizine (1), chlorphenamine (1), desmopressin (2), hydroxyzine (2), itraconazole (1), piroxicam (2), methotrexate (1), stiripentol (1) and topiramate (1). CONCLUSION: Following an out-patient consultation, where a new medicine is prescribed, children and their parents/carers are usually able to recall the indication, dose regimen and duration of treatment. Few were able to recall, or were told about, possible adverse effects. This may include some important drug specific effects that require vigilance during treatment.Patients, along with families and carers, should be involved in the decision to prescribe a medicine.2 This includes a discussion about the benefits of the medicine on the patient's condition and possible adverse effects.2 Treatment side effects have been shown to be a factor in treatment non-adherence in paediatric long-term medical conditions.3 Practitioners should explain to patients, and their family members or carers where appropriate, how to identify and report medicines-related patient safety incidents.4 However, this study suggests that medical staff may not be comfortable discussing the adverse effects of medicines with patients or their parents/carers.Further research in to the shared decision making process in the paediatric out-patient clinic when a new long-term medicine is prescribed is required to further support medicines adherence and the patient safety agenda.
Resumo:
Background: Thyroid drains following thyroid surgery are routinely used despite minimal supportive evidence. Our aim in this study is to determine the impact of routine open drainage of the thyroid bed postoperatively on ultrasound-determined fluid accumulation at 24 hours. Methods: We conducted a prospective randomised clinical trial on patients undergoing thyroid surgery. Patients were randomly assigned to a drain group (n = 49) or a no-drain group (n = 44) immediately prior to wound closure. Patients underwent a neck ultrasound on day 1 and day 2 postoperatively. After surgery, we evaluated visual analogue scale pain scores, postoperative analgesic requirements, self-reported scar satisfaction at 6 weeks and complications. Results: There was significantly less mean fluid accumulated in the drain group on both day 1, 16.4 versus 25.1 ml (P-value = 0.005), and day 2, 18.4 versus 25.7 ml (P-value = 0.026), following surgery. We found no significant differences between the groups with regard to length of stay, scar satisfaction, visual analogue scale pain score and analgesic requirements. There were four versus one wound infections in the drain versus no-drain groups. This finding was not statistically significant (P = 0.154). No life-threatening bleeds occurred in either group. Conclusions: Fluid accumulation after thyroid surgery was significantly lessened by drainage. However, this study did not show any clinical benefit associated with this finding in the non-emergent setting. Drains themselves showed a trend indicating that they may augment infection rates. The results of this study suggest that the frequency of acute life-threatening bleeds remains extremely low following abandoning drains. We advocate abandoning routine use of thyroid drains. Trial registration: ISRCTN94715414.
Resumo:
Comprehensive analysis of the electrical properties, structure and composition of Pt interconnects, developed via mask-less, electron beam induced deposition of the carbon-free Pt precursor, Pt(PF3)4, is presented. The results demonstrate significantly improved electrical performance in comparison with that generated from the standard organometallic precursor, (CH3)3Pt(CpCH3). In particular, the Pt interconnects exhibited perfect ohmic behavior and resistivity that can be diminished to 0.24 × 10−3 Ω cm, which is only one order of magnitude higher than bulk Pt, in comparison to 0.2 Ω cm for the standard carbon-containing interconnects. A maximum current density of 1.87 × 107 A cm−2 was achieved for the carbon-free Pt, compared to 9.44 × 105 A cm−2 for the standard Pt precursor. The enhanced electrical properties of the as-deposited materials can be explained by the absence of large amounts of carbon impurities, and their further improvement by postdeposition annealing in N2. In-situ TEM heating experiments confirmed that the annealing step induces sintering of the Pt nanocrystals and improved crystallinity, which contributes to the enhanced electrical performance. Alternative annealing under reducing conditions resulted in improved performance of the standard Pt interconnects, while the carbon-free deposit suffered electrical and structural breakage due to formation of larger Pt islands
Resumo:
The authors report a chemical process to remove the native oxide on Ge and Bi2Se3 crystals, thus facilitating high-resolution electron beam lithography (EBL) on their surfaces using a hydrogen silsesquioxane (HSQ) resist. HSQ offers the highest resolution of all the commercially available EBL resists. However, aqueous HSQ developers such as NaOH and tetramethylammonium hydroxide have thus far prevented the fabrication of high-resolution structures via the direct application of HSQ to Ge and Bi2Se3, due to the solubility of components of their respective native oxides in these strong aqueous bases. Here we provide a route to the generation of ordered, high-resolution, high-density Ge and Bi2Se3 nanostructures with potential applications in microelectronics, thermoelectric, and photonics devices.
Resumo:
Gold nanoparticles (Au NPs) with diameters ranging between 5-60 nm have been synthesised in water, and further stabilized with polyethylene glycol-based thiol polymers (mPEG-SH). Successful PEGylation of the Au NPs was confirmed by Dynamic Light scattering (DLS) and Zeta potential measurements. PEG coating of the Au NPs is the key of their colloidal stabilty, and its successful applications. Catalytic efficiency testing of the PEG-AuNPs were carried out on homocoupling of boronic acid. PEG-Au NPs with AuNps diameter < 30 nm were useful as catalyst in water. Finally, the PEG-Au NPs were also shown to be stable in biological fluid and not cytotoxic on B16.F10 cell line, making them attractive for further studies.
Resumo:
Electron beam-induced deposition (EBID) is a direct write process where an electron beam locally decomposes a precursor gas leaving behind non-volatile deposits. It is a fast and relatively in-expensive method designed to develop conductive (metal) or isolating (oxide) nanostructures. Unfortunately the EBID process results in deposition of metal nanostructures with relatively high resistivity because the gas precursors employed are hydrocarbon based. We have developed deposition protocols using novel gas-injector system (GIS) with a carbon free Pt precursor. Interconnect type structures were deposited on preformed metal architectures. The obtained structures were analysed by cross-sectional TEM and their electrical properties were analysed ex-situ using four point probe electrical tests. The results suggest that both the structural and electrical characteristics differ significantly from those of Pt interconnects deposited by conventional hydrocarbon based precursors, and show great promise for the development of low resistivity electrical contacts.
Resumo:
Germanium (Ge) nanowires are of current research interest for high speed nanoelectronic devices due to the lower band gap and high carrier mobility compatible with high K-dielectrics and larger excitonic Bohr radius ensuing a more pronounced quantum confinement effect [1-6]. A general way for the growth of Ge nanowires is to use liquid or a solid growth promoters in a bottom-up approach which allow control of the aspect ratio, diameter, and structure of 1D crystals via external parameters, such as precursor feedstock, temperature, operating pressure, precursor flow rate etc [3, 7-11]. The Solid-phase seeding is preferred for more control processing of the nanomaterials and potential suppression of the unintentional incorporation of high dopant concentrations in semiconductor nanowires and unrequired compositional tailing of the seed-nanowire interface [2, 5, 9, 12]. There are therefore distinct features of the solid phase seeding mechanism that potentially offer opportunities for the controlled processing of nanomaterials with new physical properties. A superior control over the growth kinetics of nanowires could be achieved by controlling the inherent growth constraints instead of external parameters which always account for instrumental inaccuracy. The high dopant concentrations in semiconductor nanowires can result from unintentional incorporation of atoms from the metal seed material, as described for the Al catalyzed VLS growth of Si nanowires [13] which can in turn be depressed by solid-phase seeding. In addition, the creation of very sharp interfaces between group IV semiconductor segments has been achieved by solid seeds [14], whereas the traditionally used liquid Au particles often leads to compositional tailing of the interface [15] . Korgel et al. also described the superior size retention of metal seeds in a SFSS nanowire growth process, when compared to a SFLS process using Au colloids [12]. Here in this work we have used silver and alloy seed particle with different compositions to manipulate the growth of nanowires in sub-eutectic regime. The solid seeding approach also gives an opportunity to influence the crystallinity of the nanowires independent of the substrate. Taking advantage of the readily formation of stacking faults in metal nanoparticles, lamellar twins in nanowires could be formed.
Resumo:
Conductive AFM and in situ methods were used to determine contact resistance and resistivity of individual Sb2S3 nanowires. Nanowires were deposited on oxidized Si surface for in situ measurements and on Si surface with macroelectrodes for conductive AFM (C-AFM) measurements. Contact resistance was determined by measurement of I(V) characteristics at different distances from the nanowire contact with the macroelectrode and resistivity of nanowires was determined. Sb2S3 is a soft material with low adhesion force to the surface and therefore special precautions were taken during measurements.