Automated design of microwave discrete tuning differential capacitance circuits in Si-integrated technologies

A genetic algorithm used to design radio-frequency binary-weighted differential switched capacitor arrays (RFDSCAs) is presented in this article. The algorithm provides a set of circuits all having the same maximum performance. This article also describes the design, implementation, and measurements results of a 0.25 lm BiCMOS 3-bit RFDSCA. The experimental results show that the circuit presents the expected performance up to 40 GHz. The similarity between the evolutionary solutions, circuit simulations, and measured results indicates that the genetic synthesis method is a very useful tool for designing optimum performance RFDSCAs.

Modified Particle Swarm Optimization Applied to Integrated Demand Response and DG Resources Scheduling

The elastic behavior of the demand consumption jointly used with other available resources such as distributed generation (DG) can play a crucial role for the success of smart grids. The intensive use of Distributed Energy Resources (DER) and the technical and contractual constraints result in large-scale non linear optimization problems that require computational intelligence methods to be solved. This paper proposes a Particle Swarm Optimization (PSO) based methodology to support the minimization of the operation costs of a virtual power player that manages the resources in a distribution network and the network itself. Resources include the DER available in the considered time period and the energy that can be bought from external energy suppliers. Network constraints are considered. The proposed approach uses Gaussian mutation of the strategic parameters and contextual self-parameterization of the maximum and minimum particle velocities. The case study considers a real 937 bus distribution network, with 20310 consumers and 548 distributed generators. The obtained solutions are compared with a deterministic approach and with PSO without mutation and Evolutionary PSO, both using self-parameterization.

Epidemiologia e Saúde Públi

RESUMO - Visa-se explicitar a origem, a razão de ser, a natureza e o que se perspectiva da relação entre a Epidemiologia e a Saúde Pública, através de uma leitura histórica. As duas entidades foram-se definindo e fazendo sentido em conjunto, com sucessos e, também, muita polémica, desde há milénios e até meados do século XIX. Nesta época, uma combinação de circunstâncias proporcionou-lhes uma explosão de crescimento e de definição, de par com várias outras áreas disciplinares. Desde o antigo relato bíblico de como boa alimentação explica o bom estado de saúde, até à valorização científica das condicionantes sociais e económicas da saúde por Marmot e Rose, passando por «miasmas» causando doença e pela deslocação do conceito de risco individual de saúde para o de risco populacional — com as implicações inerentes a essa importante inovação —, este percurso permite identificar as fundações de tão notável simbiose, explicar o estado presente, vê-la evoluir e achar nela o significado do património hoje disponível, e o que ele promete. Algumas discrepâncias quanto à designação dos seus métodos, bem como a contínua discussão quanto à sua verdadeira natureza e orientação futura, atestam a juventude da Epidemiologia como disciplina científica. Entretanto, a Saúde Pública esforça-se por manter a sua essência integradora, à medida que outras disciplinas contribuem mais para que concretize os seus objectivos; é desafiada pela exposição das populações, em larga escala, a factores de doença, por vezes de intensidade mínima, e pelo surgimento de novas doenças ou a ampliação do volume de outras na população, muitas vezes não respeitando fronteiras. A história dessa simbiose mostra bem que conhecer o modo como uma doença se origina permite controlá-la na população, ou mesmo evitá-la, e que é grande o número de problemas que, em sinergia, as duas disciplinas podem clarificar e resolver. Assim, a Epidemiologia oferece à Saúde Pública explicações (olhos, inteligência e linguagem) para os problemas de saúde das populações — o que permite à segunda saber sobre o quê agir —, cenários de possível evolução dos problemas — o que permite aos decisores optarem em função de diferentes pressupostos, sobre como agir — e capacidade de juízo sobre os resultados das acções empreendidas, em simultâneo com a elevação do nível de consciência, de compreensão e de intervenção quanto ao que se está a passar, tanto pelos profissionais, como pela população — transferência do conhecimento. Facilmente se antecipa que a relação entre as duas disciplinas irá evoluir para maior complexidade e, também, solicitação e exigência da Saúde Pública sobre a Epidemiologia, que terá que corresponder em utilidade. E esta, continuando a subespecializar-se e a sofisticar-se tanto nos métodos, como nos enfoques sobre categorias específicas de factores, precisará de progredir muito na gestão da sua consistência enquanto corpo de conhecimento integrado e com peculiaridades metodológicas, à semelhança da Saúde Pública.O modo como evoluirá a relação entre ambas depende ainda da evolução dos próprios problemas, conceitos, teorias e soluções relacionados com a saúde das populações, e ainda do desenvolvimento das demais disciplinas chamadas à integração por ambas, para enfrentarem esses desafios. Nomeadamente, a Epidemiologia terá que gerir com perícia dificuldades já identificadas, como: incorporar métodos qualitativos de investigação na sua fortíssima tradição e cultura quantitativa; operacionalizar satisfatoriamente o conceito de «risco atribuível na população», ao serviço da definição de prioridades de acção dirigida às necessidades de saúde; aperfeiçoar modelos de interpretação causal que respeitem a multicausalidade; aproveitar as técnicas estatísticas de análise multivariada, sem se perder na abstracção dos seus modelos; desenvolver a investigação nas dimensões positivas de saúde, além da doença, para contribuir melhor para a realização da Saúde Pública, sua principal cliente e fornecedora de oportunidades.--------------------------ABSTRACT - The aim of the author is to explicit the origin, the rationale, the nature and the prospects of the relationship between Epidemiology and Public health, through an historic approach. The two entities have been defining and making sense together, by achieving successes, but also with much controversy, since millennia ago, until mid XIX century. A combination of circumstances provided them the opportunity for an explosion of growth and definition, then, alongside several other disciplines. From the ancient biblical report on how good food explains good health, up to the scientific appreciation of both social and economical constraints to health by Marmot and Rose, passing through «miasma» causing disease and through displacing from individual health risk to population risk — with the inherent implications of that important innovation —, this route allows the identification of the foundations of such remarkable symbiosis, the explanation of current status, to see its evolution and find in it the meaning of today’s heritage and what it promises. Some discrepancies on the name of its methods, as well as the continuing discussion about its true nature and future orientation, attest Epidemiology’s youth as a scientific discipline. Meanwhile, Public Health strives to keep its integrating essence, while other disciplines increasingly contribute so that it achieves its objectives; it is challenged by large scale population exposure to disease factors, sometimes with a minimum intensity, and by new diseases emerging in the population or by old ones getting amplified, often not respecting regions boundaries. The history of such a symbiosis shows that knowing the way a disease is generated allows to control it in the population, or even to avoid it, and that the number of problems that the two disciplines are able to clarify and solve together in synergy is considerable. Therefore, Epidemiology offers Public Health explanations (eyes, intelligence and language) for populations’s health problems — allowing that the latter knows on what to act —, scenarios on how problems may tend to evolve — allowing decision-makers to make their choices as a function of different assumptions, on how to act — and judgement capabilities on the results of already undertaken actions, accompanied by the raising of conscience level, understanding and intervention of what is going on by both professionals and the population – knowledge transfer. It is easy to anticipate that the relationship between both disciplines will develop towards increasing complexity and demand from Public Health to Epidemiology, and that this one will have to correspond in usefulness. And the latter, while continuing its subspecialisation and sophistication either in its methods, or in its approaches to specific factor categories, will need to progress in managing its consistency as an integrated body of knowledge having methodological peculiarities, similarly to Public Health. Further, the way the relationship between both will evolve depends on the evolution of the problems themselves, of the concepts, theories and solutions related to the health of populations, and on the development of remaining disciplines called to integration by both, in other to face those problems. Namely, Epidemiology will have to manage with expertise some already known difficulties, as: the inclusion of qualitative research methods in its very strong quantitative tradition and culture; to grant satisfactory operation to the «population attributable risk» concept, in support to the definition of action priorities envisaging health needs; to improve causal interpretation models that comply with multicausality; to take advantage of multivariate statistical techniques, without get

Epidemiology and Anthropology: an integrated approach dealing with bio-socio-cultural aspects as strategy for the control of endemic diseases

The control of endemic diseases has not attained the desired level of effectiveness in spite of the use of modern efficient thecnologies. The classic interventionist approach for the control of schistosomiasis is centered on systemic control of the snail hosts combined to large scale medical treatment and is usually carried out without social preocupation due to the assisted communities. It is easy to understand the interest and the ethical compromise of public health research while producing studies in which the biological and social determinants as well as the cultural components should be considered and also encompass the historical dimensions and symbolic representations. In face of the recent political decision in favor of decentralizations of health administration to municipal level, we suggest, in the present paper, an integrated approach for the epidemiological diagnosis of an endemic situation at local level. Theoretical and methodological aspects from both, epidemiology and anthropology are discussed. Epidemiological methods can be used to detect the dependent variables (those related to the human infection) and the independent variables (demographic, economic, sanitary and social). Another methodological approach of anthropological /etnographic nature can be conducted in order to make an articulation of the knowledge on the various dimensions or determinant levels of the disease. Mutual comprehension, between researchers and the people under investigation, on the dynamic transmission process would be relevant for a joint construction, at local level, of programmed actions for the control of endemic diseases. This would extend reflections on the health/disease process as a whole.

Systems biology of plants : from intraspecific genome variation to computational morphodynamics

Recently, the introduction of second generation sequencing and further advance-ments in confocal microscopy have enabled system-level studies for the functional characterization of genes. The degree of complexity intrinsic to these approaches needs the development of bioinformatics methodologies and computational models for extracting meaningful biological knowledge from the enormous amount of experi¬mental data which is continuously generated. This PhD thesis presents several novel bioinformatics methods and computational models to address specific biological questions in Plant Biology by using the plant Arabidopsis thaliana as a model system. First, a spatio-temporal qualitative analysis of quantitative transcript and protein profiles is applied to show the role of the BREVIS RADIX (BRX) protein in the auxin- cytokinin crosstalk for root meristem growth. Core of this PhD work is the functional characterization of the interplay between the BRX protein and the plant hormone auxin in the root meristem by using a computational model based on experimental evidence. Hyphotesis generated by the modelled to the discovery of a differential endocytosis pattern in the root meristem that splits the auxin transcriptional response via the plasma membrane to nucleus partitioning of BRX. This positional information system creates an auxin transcriptional pattern that deviates from the canonical auxin response and is necessary to sustain the expression of a subset of BRX-dependent auxin-responsive genes to drive root meristem growth. In the second part of this PhD thesis, we characterized the genome-wide impact of large scale deletions on four divergent Arabidopsis natural strains, through the integration of Ultra-High Throughput Sequencing data with data from genomic hybridizations on tiling arrays. Analysis of the identified deletions revealed a considerable portion of protein coding genes affected and supported a history of genomic rearrangements shaped by evolution. In the last part of the thesis, we showed that VIP3 gene in Arabidopsis has an evo-lutionary conserved role in the 3' to 5' mRNA degradation machinery, by applying a novel approach for the analysis of mRNA-Seq data from random-primed mRNA. Altogether, this PhD research contains major advancements in the study of natural genomic variation in plants and in the application of computational morphodynamics models for the functional characterization of biological pathways essential for the plant. - Récemment, l'introduction du séquençage de seconde génération et les avancées dans la microscopie confocale ont permis des études à l'échelle des différents systèmes cellulaires pour la caractérisation fonctionnelle de gènes. Le degrés de complexité intrinsèque à ces approches ont requis le développement de méthodologies bioinformatiques et de modèles mathématiques afin d'extraire de la masse de données expérimentale générée, des information biologiques significatives. Ce doctorat présente à la fois des méthodes bioinformatiques originales et des modèles mathématiques pour répondre à certaines questions spécifiques de Biologie Végétale en utilisant la plante Arabidopsis thaliana comme modèle. Premièrement, une analyse qualitative spatio-temporelle de profiles quantitatifs de transcripts et de protéines est utilisée pour montrer le rôle de la protéine BREVIS RADIX (BRX) dans le dialogue entre l'auxine et les cytokinines, des phytohormones, dans la croissance du méristème racinaire. Le noyau de ce travail de thèse est la caractérisation fonctionnelle de l'interaction entre la protéine BRX et la phytohormone auxine dans le méristème de la racine en utilisant des modèles informatiques basés sur des preuves expérimentales. Les hypothèses produites par le modèle ont mené à la découverte d'un schéma différentiel d'endocytose dans le méristème racinaire qui divise la réponse transcriptionnelle à l'auxine par le partitionnement de BRX de la membrane plasmique au noyau de la cellule. Cette information positionnelle crée une réponse transcriptionnelle à l'auxine qui dévie de la réponse canonique à l'auxine et est nécessaire pour soutenir l'expression d'un sous ensemble de gènes répondant à l'auxine et dépendant de BRX pour conduire la croissance du méristème. Dans la seconde partie de cette thèse de doctorat, nous avons caractérisé l'impact sur l'ensemble du génome des délétions à grande échelle sur quatre souches divergentes naturelles d'Arabidopsis, à travers l'intégration du séquençage à ultra-haut-débit avec l'hybridation génomique sur puces ADN. L'analyse des délétions identifiées a révélé qu'une proportion considérable de gènes codant était affectée, supportant l'idée d'un historique de réarrangement génomique modelé durant l'évolution. Dans la dernière partie de cette thèse, nous avons montré que le gène VÏP3 dans Arabidopsis a conservé un rôle évolutif dans la machinerie de dégradation des ARNm dans le sens 3' à 5', en appliquant une nouvelle approche pour l'analyse des données de séquençage d'ARNm issue de transcripts amplifiés aléatoirement. Dans son ensemble, cette recherche de doctorat contient des avancées majeures dans l'étude des variations génomiques naturelles des plantes et dans l'application de modèles morphodynamiques informatiques pour la caractérisation de réseaux biologiques essentiels à la plante. - Le développement des plantes est écrit dans leurs codes génétiques. Pour comprendre comment les plantes sont capables de s'adapter aux changements environnementaux, il est essentiel d'étudier comment leurs gènes gouvernent leur formation. Plus nous essayons de comprendre le fonctionnement d'une plante, plus nous réalisons la complexité des mécanismes biologiques, à tel point que l'utilisation d'outils et de modèles mathématiques devient indispensable. Dans ce travail, avec l'utilisation de la plante modèle Arabidopsis thalicinci nous avons résolu des problèmes biologiques spécifiques à travers le développement et l'application de méthodes informatiques concrètes. Dans un premier temps, nous avons investigué comment le gène BREVIS RADIX (BRX) régule le développement de la racine en contrôlant la réponse à deux hormones : l'auxine et la cytokinine. Nous avons employé une analyse statistique sur des mesures quantitatives de transcripts et de produits de gènes afin de démontrer que BRX joue un rôle antagonisant dans le dialogue entre ces deux hormones. Lorsque ce-dialogue moléculaire est perturbé, la racine primaire voit sa longueur dramatiquement réduite. Pour comprendre comment BRX répond à l'auxine, nous avons développé un modèle informatique basé sur des résultats expérimentaux. Les simulations successives ont mené à la découverte d'un signal positionnel qui contrôle la réponse de la racine à l'auxine par la régulation du mouvement intracellulaire de BRX. Dans la seconde partie de cette thèse, nous avons analysé le génome entier de quatre souches naturelles d'Arabidopsis et nous avons trouvé qu'une grande partie de leurs gènes étaient manquant par rapport à la souche de référence. Ce résultat indique que l'historique des modifications génomiques conduites par l'évolution détermine une disponibilité différentielle des gènes fonctionnels dans ces plantes. Dans la dernière partie de ce travail, nous avons analysé les données du transcriptome de la plante où le gène VIP3 était non fonctionnel. Ceci nous a permis de découvrir le rôle double de VIP3 dans la régulation de l'initiation de la transcription et dans la dégradation des transcripts. Ce rôle double n'avait jusqu'alors été démontrée que chez l'homme. Ce travail de doctorat supporte le développement et l'application de méthodologies informatiques comme outils inestimables pour résoudre la complexité des problèmes biologiques dans la recherche végétale. L'intégration de la biologie végétale et l'informatique est devenue de plus en plus importante pour l'avancée de nos connaissances sur le fonctionnement et le développement des plantes.

Improvement of the quality factor of RF integrated inductors by layout optimization

A systematic method to improve the quality (Q) factor of RF integrated inductors is presented in this paper. The proposed method is based on the layout optimization to minimize the series resistance of the inductor coil, taking into account both ohmic losses, due to conduction currents, and magnetically induced losses, due to eddy currents. The technique is particularly useful when applied to inductors in which the fabrication process includes integration substrate removal. However, it is also applicable to inductors on low-loss substrates. The method optimizes the width of the metal strip for each turn of the inductor coil, leading to a variable strip-width layout. The optimization procedure has been successfully applied to the design of square spiral inductors in a silicon-based multichip-module technology, complemented with silicon micromachining postprocessing. The obtained experimental results corroborate the validity of the proposed method. A Q factor of about 17 have been obtained for a 35-nH inductor at 1.5 GHz, with Q values higher than 40 predicted for a 20-nH inductor working at 3.5 GHz. The latter is up to a 60% better than the best results for a single strip-width inductor working at the same frequency.

Design and Evaluation of a Single-Span Bridge Using Ultra- High Performance Concrete, September 2009

Research presented herein describes an application of a newly developed material called Ultra-High Performance Concrete (UHPC) to a single-span bridge. The two primary objectives of this research were to develop a shear design procedure for possible code adoption and to provide a performance evaluation to ensure the viability of the first UHPC bridge in the United States. Two other secondary objectives included defining of material properties and understanding of flexural behavior of a UHPC bridge girder. In order to obtain information in these areas, several tests were carried out including material testing, large-scale laboratory flexure testing, large-scale laboratory shear testing, large-scale laboratory flexure-shear testing, small-scale laboratory shear testing, and field testing of a UHPC bridge. Experimental and analytical results of the described tests are presented. Analytical models to understand the flexure and shear behavior of UHPC members were developed using iterative computer based procedures. Previous research is referenced explaining a simplified flexural design procedure and a simplified pure shear design procedure. This work describes a shear design procedure based on the Modified Compression Field Theory (MCFT) which can be used in the design of UHPC members. Conclusions are provided regarding the viability of the UHPC bridge and recommendations are made for future research.

Integrated application of geochemical and geophysical methods for hydrogeological impact assessment for tunneling in fractured rock

The interaction of tunneling with groundwater is a problem both from an environmental and an engineering point of view. In fact, tunnel drilling may cause a drawdown of piezometric levels and water inflows into tunnels that may cause problems during excavation of the tunnel. While the influence of tunneling on the regional groundwater systems may be adequately predicted in porous media using analytical solutions, such an approach is difficult to apply in fractured rocks. Numerical solutions are preferable and various conceptual approaches have been proposed to describe and model groundwater flow through fractured rock masses, ranging from equivalent continuum models to discrete fracture network simulation models. However, their application needs many preliminary investigations on the behavior of the groundwater system based on hydrochemical and structural data. To study large scale flow systems in fractured rocks of mountainous terrains, a comprehensive study was conducted in southern Switzerland, using as case studies two infrastructures actually under construction: (i) the Monte Ceneri base railway tunnel (Ticino), and the (ii) San Fedele highway tunnel (Roveredo, Graubiinden). The chosen approach in this study combines the temporal and spatial variation of geochemical and geophysical measurements. About 60 localities from both surface and underlying tunnels were temporarily and spatially monitored during more than one year. At first, the project was focused on the collection of hydrochemical and structural data. A number of springs, selected in the area surrounding the infrastructures, were monitored for discharge, electric conductivity, pH, and temperature. Water samples (springs, tunnel inflows and rains) were taken for isotopic analysis; in particular the stable isotope composition (δ2Η, δ180 values) can reflect the origin of the water, because of spatial (recharge altitude, topography, etc.) and temporal (seasonal) effects on precipitation which in turn strongly influence the isotopic composition of groundwater. Tunnel inflows in the accessible parts of the tunnels were also sampled and, if possible, monitored with time. Noble-gas concentrations and their isotope ratios were used in selected locations to better understand the origin and the circulation of the groundwater. In addition, electrical resistivity and VLF-type electromagnetic surveys were performed to identify water bearing fractures and/or weathered areas that could be intersected at depth during tunnel construction. The main goal of this work was to demonstrate that these hydrogeological data and geophysical methods, combined with structural and hydrogeological information, can be successfully used in order to develop hydrogeological conceptual models of the groundwater flow in regions to be exploited for tunnels. The main results of the project are: (i) to have successfully tested the application of electrical resistivity and VLF-electromagnetic surveys to asses water-bearing zones during tunnel drilling; (ii) to have verified the usefulness of noble gas, major ion and stable isotope compositions as proxies for the detection of faults and to understand the origin of the groundwater and its flow regimes (direct rain water infiltration or groundwater of long residence time); and (iii) to have convincingly tested the combined application of a geochemical and geophysical approach to assess and predict the vulnerability of springs to tunnel drilling. - L'interférence entre eaux souterraines et des tunnels pose des problèmes environnementaux et de génie civile. En fait, la construction d'un tunnel peut faire abaisser le niveau des nappes piézométriques et faire infiltrer de l'eau dans le tunnel et ainsi créer des problème pendant l'excavation. Alors que l'influence de la construction d'un tunnel sur la circulation régionale de l'eau souterraine dans des milieux poreux peut être prédite relativement facilement par des solution analytiques de modèles, ceci devient difficile dans des milieux fissurés. Dans ce cas-là, des solutions numériques sont préférables et plusieurs approches conceptuelles ont été proposées pour décrire et modéliser la circulation d'eau souterraine à travers les roches fissurées, en allant de modèles d'équivalence continue à des modèles de simulation de réseaux de fissures discrètes. Par contre, leur application demande des investigations importantes concernant le comportement du système d'eau souterraine basées sur des données hydrochimiques et structurales. Dans le but d'étudier des grands systèmes de circulation d'eau souterraine dans une région de montagnes, une étude complète a été fait en Suisse italienne, basée sur deux grandes infrastructures actuellement en construction: (i) Le tunnel ferroviaire de base du Monte Ceneri (Tessin) et (ii) le tunnel routière de San Fedele (Roveredo, Grisons). L'approche choisie dans cette étude est la combinaison de variations temporelles et spatiales des mesures géochimiques et géophysiques. Environs 60 localités situées à la surface ainsi que dans les tunnels soujacents ont été suiviès du point de vue temporel et spatial pendant plus de un an. Dans un premier temps le projet se focalisait sur la collecte de données hydrochimiques et structurales. Un certain nombre de sources, sélectionnées dans les environs des infrastructures étudiées ont été suivies pour le débit, la conductivité électrique, le pH et la température. De l'eau (sources, infiltration d'eau de tunnel et pluie) a été échantillonnés pour des analyses isotopiques; ce sont surtout les isotopes stables (δ2Η, δ180) qui peuvent indiquer l'origine d'une eaux, à cause de la dépendance d'effets spatiaux (altitude de recharge, topographie etc.) ainsi que temporels (saisonaux) sur les précipitations météoriques , qui de suite influencent ainsi la composition isotopique de l'eau souterraine. Les infiltrations d'eau dans les tunnels dans les parties accessibles ont également été échantillonnées et si possible suivies au cours du temps. La concentration de gaz nobles et leurs rapports isotopiques ont également été utilisées pour quelques localités pour mieux comprendre l'origine et la circulation de l'eau souterraine. En plus, des campagnes de mesures de la résistivité électrique et électromagnétique de type VLF ont été menées afin d'identifier des zone de fractures ou d'altération qui pourraient interférer avec les tunnels en profondeur pendant la construction. Le but principal de cette étude était de démontrer que ces données hydrogéologiques et géophysiques peuvent être utilisées avec succès pour développer des modèles hydrogéologiques conceptionels de tunnels. Les résultats principaux de ce travail sont : i) d'avoir testé avec succès l'application de méthodes de la tomographie électrique et des campagnes de mesures électromagnétiques de type VLF afin de trouver des zones riches en eau pendant l'excavation d'un tunnel ; ii) d'avoir prouvé l'utilité des gaz nobles, des analyses ioniques et d'isotopes stables pour déterminer l'origine de l'eau infiltrée (de la pluie par le haut ou ascendant de l'eau remontant des profondeurs) et leur flux et pour déterminer la position de failles ; et iii) d'avoir testé d'une manière convainquant l'application combinée de méthodes géochimiques et géophysiques pour juger et prédire la vulnérabilité de sources lors de la construction de tunnels. - L'interazione dei tunnel con il circuito idrico sotterraneo costituisce un problema sia dal punto di vista ambientale che ingegneristico. Lo scavo di un tunnel puô infatti causare abbassamenti dei livelli piezometrici, inoltre le venute d'acqua in galleria sono un notevole problema sia in fase costruttiva che di esercizio. Nel caso di acquiferi in materiale sciolto, l'influenza dello scavo di un tunnel sul circuito idrico sotterraneo, in genere, puô essere adeguatamente predetta attraverso l'applicazione di soluzioni analitiche; al contrario un approccio di questo tipo appare inadeguato nel caso di scavo in roccia. Per gli ammassi rocciosi fratturati sono piuttosto preferibili soluzioni numeriche e, a tal proposito, sono stati proposti diversi approcci concettuali; nella fattispecie l'ammasso roccioso puô essere modellato come un mezzo discreto ο continuo équivalente. Tuttavia, una corretta applicazione di qualsiasi modello numerico richiede necessariamente indagini preliminari sul comportamento del sistema idrico sotterraneo basate su dati idrogeochimici e geologico strutturali. Per approfondire il tema dell'idrogeologia in ammassi rocciosi fratturati tipici di ambienti montani, è stato condotto uno studio multidisciplinare nel sud della Svizzera sfruttando come casi studio due infrastrutture attualmente in costruzione: (i) il tunnel di base del Monte Ceneri (canton Ticino) e (ii) il tunnel autostradale di San Fedele (Roveredo, canton Grigioni). L'approccio di studio scelto ha cercato di integrare misure idrogeochimiche sulla qualité e quantité delle acque e indagini geofisiche. Nella fattispecie sono state campionate le acque in circa 60 punti spazialmente distribuiti sia in superficie che in sotterraneo; laddove possibile il monitoraggio si è temporalmente prolungato per più di un anno. In una prima fase, il progetto di ricerca si è concentrato sull'acquisizione dati. Diverse sorgenti, selezionate nelle aree di possibile influenza attorno allé infrastrutture esaminate, sono state monitorate per quel che concerne i parametri fisico-chimici: portata, conduttività elettrica, pH e temperatura. Campioni d'acqua sono stati prelevati mensilmente su sorgenti, venute d'acqua e precipitazioni, per analisi isotopiche; nella fattispecie, la composizione in isotopi stabili (δ2Η, δ180) tende a riflettere l'origine delle acque, in quanto, variazioni sia spaziali (altitudine di ricarica, topografia, etc.) che temporali (variazioni stagionali) della composizione isotopica delle precipitazioni influenzano anche le acque sotterranee. Laddove possibile, sono state campionate le venute d'acqua in galleria sia puntualmente che al variare del tempo. Le concentrazioni dei gas nobili disciolti nell'acqua e i loro rapporti isotopici sono stati altresi utilizzati in alcuni casi specifici per meglio spiegare l'origine delle acque e le tipologie di circuiti idrici sotterranei. Inoltre, diverse indagini geofisiche di resistività elettrica ed elettromagnetiche a bassissima frequenza (VLF) sono state condotte al fine di individuare le acque sotterranee circolanti attraverso fratture dell'ammasso roccioso. Principale obiettivo di questo lavoro è stato dimostrare come misure idrogeochimiche ed indagini geofisiche possano essere integrate alio scopo di sviluppare opportuni modelli idrogeologici concettuali utili per lo scavo di opere sotterranee. I principali risultati ottenuti al termine di questa ricerca sono stati: (i) aver testato con successo indagini geofisiche (ERT e VLF-EM) per l'individuazione di acque sotterranee circolanti attraverso fratture dell'ammasso roccioso e che possano essere causa di venute d'acqua in galleria durante lo scavo di tunnel; (ii) aver provato l'utilità di analisi su gas nobili, ioni maggiori e isotopi stabili per l'individuazione di faglie e per comprendere l'origine delle acque sotterranee (acque di recente infiltrazione ο provenienti da circolazioni profonde); (iii) aver testato in maniera convincente l'integrazione delle indagini geofisiche e di misure geochimiche per la valutazione della vulnérabilité delle sorgenti durante lo scavo di nuovi tunnel. - "La NLFA (Nouvelle Ligne Ferroviaire à travers les Alpes) axe du Saint-Gothard est le plus important projet de construction de Suisse. En bâtissant la nouvelle ligne du Saint-Gothard, la Suisse réalise un des plus grands projets de protection de l'environnement d'Europe". Cette phrase, qu'on lit comme présentation du projet Alptransit est particulièrement éloquente pour expliquer l'utilité des nouvelles lignes ferroviaires transeuropéens pour le développement durable. Toutefois, comme toutes grandes infrastructures, la construction de nouveaux tunnels ont des impacts inévitables sur l'environnement. En particulier, le possible drainage des eaux souterraines réalisées par le tunnel peut provoquer un abaissement du niveau des nappes piézométriques. De plus, l'écoulement de l'eau à l'intérieur du tunnel, conduit souvent à des problèmes d'ingénierie. Par exemple, d'importantes infiltrations d'eau dans le tunnel peuvent compliquer les phases d'excavation, provoquant un retard dans l'avancement et dans le pire des cas, peuvent mettre en danger la sécurité des travailleurs. Enfin, l'infiltration d'eau peut être un gros problème pendant le fonctionnement du tunnel. Du point de vue de la science, avoir accès à des infrastructures souterraines représente une occasion unique d'obtenir des informations géologiques en profondeur et pour échantillonner des eaux autrement inaccessibles. Dans ce travail, nous avons utilisé une approche pluridisciplinaire qui intègre des mesures d'étude hydrogéochimiques effectués sur les eaux de surface et des investigations géophysiques indirects, tels que la tomographic de résistivité électrique (TRE) et les mesures électromagnétiques de type VLF. L'étude complète a été fait en Suisse italienne, basée sur deux grandes infrastructures actuellement en construction, qui sont le tunnel ferroviaire de base du Monte Ceneri, une partie du susmentionné projet Alptransit, situé entièrement dans le canton Tessin, et le tunnel routière de San Fedele, situé a Roveredo dans le canton des Grisons. Le principal objectif était de montrer comment il était possible d'intégrer les deux approches, géophysiques et géochimiques, afin de répondre à la question de ce que pourraient être les effets possibles dû au drainage causés par les travaux souterrains. L'accès aux galeries ci-dessus a permis une validation adéquate des enquêtes menées confirmant, dans chaque cas, les hypothèses proposées. A cette fin, nous avons fait environ 50 profils géophysiques (28 imageries électrique bidimensionnels et 23 électromagnétiques) dans les zones de possible influence par le tunnel, dans le but d'identifier les fractures et les discontinuités dans lesquelles l'eau souterraine peut circuler. De plus, des eaux ont été échantillonnés dans 60 localités situées la surface ainsi que dans les tunnels subjacents, le suivi mensuelle a duré plus d'un an. Nous avons mesurés tous les principaux paramètres physiques et chimiques: débit, conductivité électrique, pH et température. De plus, des échantillons d'eaux ont été prélevés pour l'analyse mensuelle des isotopes stables de l'hydrogène et de l'oxygène (δ2Η, δ180). Avec ces analyses, ainsi que par la mesure des concentrations des gaz rares dissous dans les eaux et de leurs rapports isotopiques que nous avons effectués dans certains cas spécifiques, il était possible d'expliquer l'origine des différents eaux souterraines, les divers modes de recharge des nappes souterraines, la présence de possible phénomènes de mélange et, en général, de mieux expliquer les circulations d'eaux dans le sous-sol. Le travail, même en constituant qu'une réponse partielle à une question très complexe, a permis d'atteindre certains importants objectifs. D'abord, nous avons testé avec succès l'applicabilité des méthodes géophysiques indirectes (TRE et électromagnétiques de type VLF) pour prédire la présence d'eaux souterraines dans le sous-sol des massifs rocheux. De plus, nous avons démontré l'utilité de l'analyse des gaz rares, des isotopes stables et de l'analyses des ions majeurs pour la détection de failles et pour comprendre l'origine des eaux souterraines (eau de pluie par le haut ou eau remontant des profondeurs). En conclusion, avec cette recherche, on a montré que l'intégration des ces informations (géophysiques et géochimiques) permet le développement de modèles conceptuels appropriés, qui permettant d'expliquer comment l'eau souterraine circule. Ces modèles permettent de prévoir les infiltrations d'eau dans les tunnels et de prédire la vulnérabilité de sources et des autres ressources en eau lors de construction de tunnels.

Simulated-annealing-based conditional simulation for the local-scale characterization of heterogeneous aquifers

Simulated-annealing-based conditional simulations provide a flexible means of quantitatively integrating diverse types of subsurface data. Although such techniques are being increasingly used in hydrocarbon reservoir characterization studies, their potential in environmental, engineering and hydrological investigations is still largely unexploited. Here, we introduce a novel simulated annealing (SA) algorithm geared towards the integration of high-resolution geophysical and hydrological data which, compared to more conventional approaches, provides significant advancements in the way that large-scale structural information in the geophysical data is accounted for. Model perturbations in the annealing procedure are made by drawing from a probability distribution for the target parameter conditioned to the geophysical data. This is the only place where geophysical information is utilized in our algorithm, which is in marked contrast to other approaches where model perturbations are made through the swapping of values in the simulation grid and agreement with soft data is enforced through a correlation coefficient constraint. Another major feature of our algorithm is the way in which available geostatistical information is utilized. Instead of constraining realizations to match a parametric target covariance model over a wide range of spatial lags, we constrain the realizations only at smaller lags where the available geophysical data cannot provide enough information. Thus we allow the larger-scale subsurface features resolved by the geophysical data to have much more due control on the output realizations. Further, since the only component of the SA objective function required in our approach is a covariance constraint at small lags, our method has improved convergence and computational efficiency over more traditional methods. Here, we present the results of applying our algorithm to the integration of porosity log and tomographic crosshole georadar data to generate stochastic realizations of the local-scale porosity structure. Our procedure is first tested on a synthetic data set, and then applied to data collected at the Boise Hydrogeophysical Research Site.

Process variability-aware proactive reconfiguration technique for mitigating aging effects in nanos scale SRAM lifetime

Postprint (published version)

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.

Turbulent shallow-water model for orographic subgrid-scale perturbations

A parallel pseudo-spectral method for the simulation in distributed memory computers of the shallow-water equations in primitive form was developed and used on the study of turbulent shallow-waters LES models for orographic subgrid-scale perturbations. The main characteristics of the code are: momentum equations integrated in time using an accurate pseudo-spectral technique; Eulerian treatment of advective terms; and parallelization of the code based on a domain decomposition technique. The parallel pseudo-spectral code is efficient on various architectures. It gives high performance onvector computers and good speedup on distributed memory systems. The code is being used for the study of the interaction mechanisms in shallow-water ows with regular as well as random orography with a prescribed spectrum of elevations. Simulations show the evolution of small scale vortical motions from the interaction of the large scale flow and the small-scale orographic perturbations. These interactions transfer energy from the large-scale motions to the small (usually unresolved) scales. The possibility of including the parametrization of this effects in turbulent LES subgrid-stress models for the shallow-water equations is addressed.

Analysis and modelling of chemical looping combustion process with and without oxygen uncoupling

Effective control and limiting of carbon dioxide (CO₂) emissions in energy production are major challenges of science today. Current research activities include the development of new low-cost carbon capture technologies, and among the proposed concepts, chemical combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) have attracted significant attention allowing intrinsic separation of pure CO₂ from a hydrocarbon fuel combustion process with a comparatively small energy penalty. Both CLC and CLOU utilize the well-established fluidized bed technology, but several technical challenges need to be overcome in order to commercialize the processes. Therefore, development of proper modelling and simulation tools is essential for the design, optimization, and scale-up of chemical looping-based combustion systems. The main objective of this work was to analyze the technological feasibility of CLC and CLOU processes at different scales using a computational modelling approach. A onedimensional fluidized bed model frame was constructed and applied for simulations of CLC and CLOU systems consisting of interconnected fluidized bed reactors. The model is based on the conservation of mass and energy, and semi-empirical correlations are used to describe the hydrodynamics, chemical reactions, and transfer of heat in the reactors. Another objective was to evaluate the viability of chemical looping-based energy production, and a flow sheet model representing a CLC-integrated steam power plant was developed. The 1D model frame was succesfully validated based on the operation of a 150 kWth laboratory-sized CLC unit fed by methane. By following certain scale-up criteria, a conceptual design for a CLC reactor system at a pre-commercial scale of 100 MWth was created, after which the validated model was used to predict the performance of the system. As a result, further understanding of the parameters affecting the operation of a large-scale CLC process was acquired, which will be useful for the practical design work in the future. The integration of the reactor system and steam turbine cycle for power production was studied resulting in a suggested plant layout including a CLC boiler system, a simple heat recovery setup, and an integrated steam cycle with a three pressure level steam turbine. Possible operational regions of a CLOU reactor system fed by bituminous coal were determined via mass, energy, and exergy balance analysis. Finally, the 1D fluidized bed model was modified suitable for CLOU, and the performance of a hypothetical 500 MWth CLOU fuel reactor was evaluated by extensive case simulations.

Scheduled service network design for integrated planning of rail freight transportation

Cette thèse étudie une approche intégrant la gestion de l’horaire et la conception de réseaux de services pour le transport ferroviaire de marchandises. Le transport par rail s’articule autour d’une structure à deux niveaux de consolidation où l’affectation des wagons aux blocs ainsi que des blocs aux services représentent des décisions qui complexifient grandement la gestion des opérations. Dans cette thèse, les deux processus de consolidation ainsi que l’horaire d’exploitation sont étudiés simultanément. La résolution de ce problème permet d’identifier un plan d’exploitation rentable comprenant les politiques de blocage, le routage et l’horaire des trains, de même que l’habillage ainsi que l’affectation du traffic. Afin de décrire les différentes activités ferroviaires au niveau tactique, nous étendons le réseau physique et construisons une structure de réseau espace-temps comprenant trois couches dans lequel la dimension liée au temps prend en considération les impacts temporels sur les opérations. De plus, les opérations relatives aux trains, blocs et wagons sont décrites par différentes couches. Sur la base de cette structure de réseau, nous modélisons ce problème de planification ferroviaire comme un problème de conception de réseaux de services. Le modèle proposé se formule comme un programme mathématique en variables mixtes. Ce dernie r s’avère très difficile à résoudre en raison de la grande taille des instances traitées et de sa complexité intrinsèque. Trois versions sont étudiées : le modèle simplifié (comprenant des services directs uniquement), le modèle complet (comprenant des services directs et multi-arrêts), ainsi qu’un modèle complet à très grande échelle. Plusieurs heuristiques sont développées afin d’obtenir de bonnes solutions en des temps de calcul raisonnables. Premièrement, un cas particulier avec services directs est analysé. En considérant une cara ctéristique spécifique du problème de conception de réseaux de services directs nous développons un nouvel algorithme de recherche avec tabous. Un voisinage par cycles est privilégié à cet effet. Celui-ci est basé sur la distribution du flot circulant sur les blocs selon les cycles issus du réseau résiduel. Un algorithme basé sur l’ajustement de pente est développé pour le modèle complet, et nous proposons une nouvelle méthode, appelée recherche ellipsoidale, permettant d’améliorer davantage la qualité de la solution. La recherche ellipsoidale combine les bonnes solutions admissibles générées par l’algorithme d’ajustement de pente, et regroupe les caractéristiques des bonnes solutions afin de créer un problème élite qui est résolu de facon exacte à l’aide d’un logiciel commercial. L’heuristique tire donc avantage de la vitesse de convergence de l’algorithme d’ajustement de pente et de la qualité de solution de la recherche ellipsoidale. Les tests numériques illustrent l’efficacité de l’heuristique proposée. En outre, l’algorithme représente une alternative intéressante afin de résoudre le problème simplifié. Enfin, nous étudions le modèle complet à très grande échelle. Une heuristique hybride est développée en intégrant les idées de l’algorithme précédemment décrit et la génération de colonnes. Nous proposons une nouvelle procédure d’ajustement de pente où, par rapport à l’ancienne, seule l’approximation des couts liés aux services est considérée. La nouvelle approche d’ajustement de pente sépare ainsi les décisions associées aux blocs et aux services afin de fournir une décomposition naturelle du problème. Les résultats numériques obtenus montrent que l’algorithme est en mesure d’identifier des solutions de qualité dans un contexte visant la résolution d’instances réelles.