Impact of PWM schemes on induction motor losses

This paper presents the results of an investigation into the impact of pulse width modulation (PWM) switching schemes on power losses in induction motors and their inverter drives. The PWM schemes considered include sinusoidal PWM, spacevector PWM and discontinuous PWM. Both experimental results and simulated predictions are presented for fractional horsepower and small integral horsepower motors. Direct loss measurements have been carried out using a calorimetric test rig; detailed simulations of the skewed motors have been carried out using multi-slice time-stepped 2D FEA. The simulated and measured losses under the different modulation schemes are compared and discussed. © 2006 IEEE.

Relaxation of selective constraints on avian mitochondrial DNA following the degeneration of flight ability

The evolution of flight is the most important feature of birds, and this ability has helped them become one of the most successful groups of vertebrates. However, some species have independently lost their ability to fly. The degeneration of flight abilit

A multi-locus phylogeny of Nectogalini shrews and influences of the paleoclimate on speciation and evolution

Nectogaline shrews are a major component of the small mammalian fauna of Europe and Asia, and are notable for their diverse ecology, including utilization of aquatic habitats. So far, molecular phylogenetic analyses including nectogaline species have been unable to infer a well-resolved, well-supported phylogeny, thus limiting the power of comparative evolutionary and ecological analyses of the group. Here, we employ Bayesian phylogenetic analyses of eight mitochondrial and three nuclear genes to infer the phylogenetic relationships of nectogaline shrews. We subsequently use this phylogeny to assess the genetic diversity within the genus Episoriculus, and determine whether adaptation to aquatic habitats evolved independently multiple times. Moreover, we both analyze the fossil record and employ Bayesian relaxed clock divergence dating analyses of DNA to assess the impact of historical global climate change on the biogeography of Nectogalini. We infer strong support for the polyphyly of the genus Episoriculus. We also find strong evidence that the ability to heavily utilize aquatic habitats evolved independently in both Neomys and Chimarrogale + Nectogale lineages. Our Bayesian molecular divergence analysis suggests that the early history of Nectogalini is characterized by a rapid radiation at the Miocene/Pliocene boundary, thus potentially explaining the lack of resolution at the base of the tree. Finally, we find evidence that nectogalines once inhabited northern latitudes, but the global cooling and desiccating events at the Miocene/Pliocene and Pliocene/Pleistocene boundaries and Pleistocene glaciation resulted in the migration of most Nectogalini lineages to their present day southern distribution. (C) 2010 Elsevier Inc. All rights reserved.

Impact of plankton structure on primary productivity in two beels of West Bengal, India

Planktonic community in floodplain wetlands embodies the energy transfer through this phase and indicates trophic status of lake. Originally rich bottom coupled with a conducive physicochemical environment encourages fast colonization of the plankton population. Present investigation was carried out in two floodplain wetlands having characteristics of open (Amda beel) and closed (Suguna beel) system. The physicochemical parameters of water and soil of the investigated heels were by and large conducive for planktonic growth. The density of plankton population varied between 1,346 and 2,170 u/l in Suguna bed whereas in Amda beel it ranged from 1,030 to 1,802 u/l. Seasonal fluctuations in water column were conspicuous and mostly dependent on the replenished resources and volume, A mixed and balanced population of diversified fauna constituted the plankton population of the investigated ecosystems. Mostly the diversity was observed to be maximum during winter seasons with coincidence of favorable temperature, dissolved oxygen and other physico-chemical parameters of water besides optimum solar penetration. Richness of planktonic structure in closed system (Suguna) resulted in higher fish production (1,570,05 kg/ha/yr) than that of open system (Amda) (384.4 kg/ha/yr).

Impact of sedimentalogical processes on mangrove ecosystem of the Indus Delta

A detailed sedimentalogical study concerning the depletion of mangrove in the Indus Delta due to the marked decrease in the supply of silt was undertaken. Thirty one stations were established for sampling in a selected area of 12000 hectares between Korangi creek and Wad do Khuddi creek. Seventy one samples of soil were collected from 6cm and 1m depth, out of which fifty one samples were selected for sedimentalogical studies. It was inferred from this study that the marine depositional processes are distinctly dominating over the fluvial processes, which is major cause in decreasing the growth of mangrove. It was also inferred that among the sampled stations the sites having clayey silt (with silt 60%-70% and clay 25%-30%) are most favourable for mangrove plantation.

Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors

An investigation into predicting failure of pneumatic conveyor pipe bends due to hard solid particle impact erosion has been carried out on an industrial scale test rig. The bend puncture point locations may vary with many factors. However, bend orientation was suspected of being a main factor due to the biased particle distribution pattern of a high concentration flow. In this paper, puncture point locations have been studied with different pipe bend orientations and geometry (a solids loading ratio of 10 being used for the high concentration flow). Test results confirmed that the puncture point location is indeed most significantly influenced by the bend orientation (especially for a high concentration flow) due to the biased particle distribution and biased particle flux distribution. © 2004 Elsevier B.V. All rights reserved.

The Impact of Contract Type on Service Provider Information Requirements

This paper is concerned with the role of information in the servitization of manufacturing which has led to “the innovation of an organisation’s capabilities and processes as equipment manufacturers seek to offer services around their products” (Neely 2009, Baines et al 2009). This evolution has resulted in an information requirement (IR) shift as companies move from discrete provision of equipment and spare parts to long-term service contracts guaranteeing prescribed performance levels. Organisations providing such services depend on a very high level of availability and quality of information throughout the service life-cycle (Menor et al 2002). This work focuses on whether, for a proposed contract based around complex equipment, the Information System is capable of providing information at an acceptable quality and requires the IRs to be examined in a formal manner. We apply a service information framework (Cuthbert et al 2008, McFarlane & Cuthbert 2012) to methodically assess IRs for different contract types to understand the information gap between them. Results from case examples indicate that this gap includes information required for the different contract types and a set of contract-specific IRs. Furthermore, the control, ownership and use of information differs across contract types as the boundary of operation and responsibility changes.

Impact of mode localization on the motional resistance of coupled MEMS resonators

This paper investigates the effect of mode-localization that arises from structural asymmetry induced by manufacturing tolerances in mechanically coupled, electrically transduced Si MEMS resonators. We demonstrate that in the case of such mechanically coupled resonators, the achievable series motional resistance (R x) is dependent not only on the quality factor (Q) but also on the variations in the eigenvector of the chosen mode of vibration induced by mode localization due to manufacturing tolerances during the fabrication process. We study this effect of mode-localization both theoretically and experimentally in two pairs of coupled double-ended tuning fork resonators with different levels of initial structural asymmetry. The measured series R x is minimal when the system is close to perfect symmetry and any deviation from structural symmetry induced by fabrication tolerances leads to a degradation in the effective R x. Mechanical tuning experiments of the stiffness of one of the coupled resonators was also conducted to study variations in R x as a function of structural asymmetry within the system, the results of which demonstrated consistent variations in motional resistance with predictions. © 2012 IEEE.