LIFE TABLE ANALYSIS OF DIAPHORINA CITRI (HEMIPTERA: PSYLLIDAE) INFESTING SWEET ORANGE (CITRUS SINENSIS) IN SAO PAULO

An ecological life table for eggs and nymphs of Diaphorina citri Kuwayama (Hemiptera: Psyllidae) was constructed with data obtained from orange orchards (Citrus sinensis Osbeck) in 2 regions of the State of Sao Paulo, over 4 generations in the period from XI-2006 to V-2007, comprising spring, summer, and fall seasons. Young growing shoots with D. citri eggs present were identified, and live individuals were counted until adult emergence. No predatory arthropods were observed in association with D. citri eggs and nymphs during the study. The mean parasitism of fourth- and fifth-instar nymphs by Tamarixia radiata Waterston (Hymenoptera: Eulophidae) was 2.3%. The durations of the egg-adult period were similar among the 4 generations, ranging from 18.0 to 24.7 d (at mean temperatures ranging from 21.6 to 26.0 degrees C) and followed the temperature requirement models obtained in the laboratory for D. citri. However, survival from the egg to the adult stage for the same period varied considerably from 1.7 to 21.4%; the highest mortalities were observed in the egg and small nymphal (first- to thirdinstar) stages, which were considered to be key phases for population growth of the pest.

Morphological description of the mouthparts of the Asian citrus psyllid, Diaphorina citri Kuwayama (Hemiptera: Psyllidae)

Scanning (SEM) and transmission (TEM) electron microscopy were used to elucidate the morphology of the rostrum, as well as the mandibular and maxillary stylets of the psyllid Diaphorina cirri, vector of phloem-inhabiting bacteria associated with citrus huanglongbing (HLB) disease. D. cirri has a cone-shaped rostrum that extends behind the pair of prothoracic coxae. The stylet bundle comprises a pair of mandibular (Md) and maxillary (Mx) stylets with a mean length of 513.3 mu m; when retracted, their proximal portions form a loop and are stored in the crumena (Cr). Serial cross-sections of the rostrum revealed that the mandibles are always projected in front of the maxillary stylets. The two maxillary stylets form the food and salivary canals, with diameters of 0.9 mu m and 0.4 mu m respectively. These two canals merge at the end of the stylets forming a common duct with a length of 4.3 mu m and a mean diameter of 0.9 mu m. The acrostyle, a distinct anatomical structure present in the common duct of aphid maxillary stylets, was not observed by TEM in the ultrathin cross-sections of the common duct (CD) of D. citri. This study provides new information on D. citri mouthparts that may help to understand the behaviour of this important vector of HLB-associated bacteria. (C) 2011 Elsevier Ltd. All rights reserved.

INSECTICIDAL AND BEHAVIORAL EFFECTS OF SECONDARY METABOLITES FROM MELIACEAE ON BEMISIA TABACI (HEMIPTERA: ALEYRODIDAE)

We studied the effects of crude extracts and fractions of Azadirachta indica, Melia azedarach, Toona ciliata and Trichilia pallida on both egg and nymph mortality and embryonic development of Bemisia tabaci B biotype, using tomato plants grown in a greenhouse. Next, we studied the host selection behavioral effects on the adult whitefly under laboratory conditions. The dichloromethane extracts from all plant species and fractions of the extract from branches of T. pallida (EBTPD) and of the extract from leaves of T. ciliata (ELTCD) in dichloromethane caused mortality of nymphs, but neither affected egg viability. However, the branches of the ethanolic extract of A. indica increased the period of embryonic development of the B. tabaci. In addition, the tomato leaflets treated with the fraction of ELTCD dichloromethane (0.28%) were the least preferred by adults, reducing the number of insects resting on the tomato leaflets. The ELTCD methanol and EBTPD dichloromethane fractions inhibited B. tabaci oviposition. Thus, Meliaceae derivatives can contribute to the reduction of the B. tabaci population. The susceptibility of the B. tabaci to Meliaceae derivatives and the relevant behavioral changes of this pest are discussed.

Natural parasitism of Diaphorina citri Kuwayama (Hemiptera, Psyllidae) nymphs by Tamarixia radiata Waterston (Hymenoptera, Eulophidae) in Sao Paulo orange groves

Natural parasitism of Diaphorina citri Kuwayama (Hemiptera, Psyllidae) nymphs by Tamarixia radiata Waterston (Hymenoptera, Eulophidae) in Sao Paulo orange groves. The psyllid Diaphorina citri Kuwayama 1908 has become the main citrus pest species in the state of Sao Paulo, Brazil, after the introduction of the huanglongbing or citrus greening. This study evaluated the parasitism of 3rd, 4th and 5th instar D. citri nymphs by Tamarixia radiata (Waterston, 1922) in citrus groves under a regimen of regular insecticide applications in ten producing regions: Araraquara, Barretos, Bauru, Botucatu, Franca, Itapetininga, Jau, Limeira, Lins and Sao Joao da Boa Vista. Sixty-nine samples of new branches infested with nymphs of D. citri were collected from 2005 to 2008 in orange groves ranging from 1 to 20 years old, of the varieties Hamlin, Pera, Valencia and Natal. The parasitoid T. radiata is widely distributed in Sao Paulo orange groves, and was identified in 50 (72%) of the samples, showing a mean parasitism rate of 12.4%. The highest parasitism rate was observed in the "summer" (from January through March), with a mean of 25.7%. Nymphal parasitism was above 90% in two samples. The probable causes of the variations in parasitism of D. citri by T. radiata are discussed.

ASSESSING Bemisia tabaci (GENN.) BIOTYPE B RESISTANCE IN SOYBEAN GENOTYPES: ANTIXENOSIS AND ANTIBIOSIS

Since it was first reported in Brazil in the 1990s, the B biotype of silverleaf whitefly (Bemisia tabaci [Genn.], Hemiptera: Aleyrodidae) has been recognized as an important pest in soybeans (Glycine max L.), reducing the productivity of this legume species in some areas of the country. As an alternative to chemical control, the use of resistant genotypes represents an important tool for integrated pest management (IPM). This study evaluated the performance of 10 soybean genotypes prior to whitefly infestation, by testing attractiveness and preference for oviposition in the greenhouse and antibiosis in the laboratory. In a multiple-choice test, 'IAC-17' was the least attractive to insects. In a no-choice test, 'IAC-17' was the least attractive for, egg deposition, indicating the occurrence of non-preference for oviposition on this genotype. Trichome density was positively correlated with the oviposition site and may be associated with the resistance of 'IAC-17' to infestation. The genotypes 'IAC-PL1', 'IAC-19', 'Conquista', 'IAC-24' and 'IAC-17' extended the insect's life cycle, indicating the occurrence of a small degree of antibiosis and/or non-preference for feeding.

Phylodynamics and movement of Phycodnaviruses among aquatic environments

Phycodnaviruses have a significant role in modulating the dynamics of phytoplankton, thereby influencing community structure and succession, nutrient cycles and potentially atmospheric composition because phytoplankton fix about half the carbon dioxide (CO2) on the planet, and some algae release dimethylsulphoniopropionate when lysed by viruses. Despite their ecological importance and widespread distribution, relatively little is known about the evolutionary history, phylogenetic relationships and phylodynamics of the Phycodnaviruses from freshwater environments. Herein we provide novel data on Phycodnaviruses from the largest river system on earth-the Amazon Basin-that were compared with samples from different aquatic systems from several places around the world. Based on phylogenetic inference using DNA polymerase (pol) sequences we show the presence of distinct populations of Phycodnaviridae. Preliminary coarse-grained phylodynamics and phylogeographic inferences revealed a complex dynamics characterized by long-term fluctuations in viral population sizes, with a remarkable worldwide reduction of the effective population around 400 thousand years before the present (KYBP), followed by a recovery near to the present time. Moreover, we present evidence for significant viral gene flow between freshwater environments, but crucially almost none between freshwater and marine environments. The ISME Journal (2012) 6, 237-247; doi: 10.1038/ismej.2011.93; published online 28 July 2011

Effect of contact and systemic insecticides on the sharpshooter Bucephalogonia xanthophis (Hemiptera: cicadellidae), a vector of Xylella fastidiosa in citrus

The knockdown and toxic effects of insecticides of different chemical groups and modes of action registered for citrus in Brazil were investigated for effective control of Bucephalogonia xanthophis, a sharpshooter vector of Xylella fastidiosa in citrus. The active ingredients dimethoate (1.2 mL/1.2L), imidacloprid (0.24 mL/1.2L) and lambda-cyhalothrin (0.24 mL/1.2L), as well as a control (water), were sprayed onto branches of potted-citrus nursery trees to evaluate the effect of residual contact. The insects were confined on sprayed branches by using sleeve cages, in groups of 10 per branch (5 branches/treatment). Lambdacyhalothrin showed a knockdown effect on B. xanthophis (>70% mortality within 2 h of exposure), and the residues were effective for approximately one wk. Imidacloprid, lambdacyhalothrin and dimethoate suppressed the vector populations for up to 3 wk after application, when the insects were exposed to sprayed plants for at least 24 h. In another experiment, 2 neonicotinoid insecticides (thiamethoxam and imidacloprid) were applied by soil drench to potted nursery trees, in order to study their systemic effect, i.e., mortality by ingestion on sharpshooter adults. Thiamethoxam and imidacloprid effectively controlled the vectors at all concentrations tested, when the insects were exposed to treated plants for 24 h (>80% mortality) or 48 h (near 100% mortality). The knockdown effect of thiamethoxam and lambda-cyhalothrin might be particularly important to prevent vector transmission of X. fastidiosa in citrus groves.

Evaluation of movements of lower limbs in non-professional ballet dancers: hip abduction and flexion

Background The literature indicated that the majority of professional ballet dancers present static and active dynamic range of motion difference between left and right lower limbs, however, no previous study focused this difference in non-professional ballet dancers. In this study we aimed to evaluate active movements of the hip in non-professional classical dancers. Methods We evaluated 10 non professional ballet dancers (16-23 years old). We measured the active range of motion and flexibility through Well Banks. We compared active range of motion between left and right sides (hip flexion and abduction) and performed correlation between active movements and flexibility. Results There was a small difference between the right and left sides of the hip in relation to the movements of flexion and abduction, which suggest the dominant side of the subjects, however, there was no statistical significance. Bank of Wells test revealed statistical difference only between the 1st and the 3rd measurement. There was no correlation between the movements of the hip (abduction and flexion, right and left sides) with the three test measurements of the bank of Wells. Conclusion There is no imbalance between the sides of the hip with respect to active abduction and flexion movements in non-professional ballet dancers.

Monitoreo de áreas marinas protegidas en el Pacífico Sur de Costa Rica

Universidad de Las Palmas de Gran Canaria. Departamento de Biología. Programa de doctorado Ecología y gestión de recursos vivos marinos

L'insediamento medievale tra storia e archeologia: dal saltopiano al vicariato di galleria (IX-XIV secolo)

La tesi si pone come finalità quella di analizzare un comprensorio territoriale dal punto di vista insediativo, cercando di coglierne le peculiarità e i mutamenti nel lungo periodo attraverso un uso incrociato di fonti scritte e archeologiche. La ricerca ha preso avvio dall’analisi del Saltopiano, uno dei distretti di ambito rurale che si ritrova nelle fonti tra IX-XII secolo, in passato già affrontato dalla storiografia specialmente in relazione all’organizzazione istituzionale delle aree rurali tra Longobardia e Romania durante i secoli altomedievali. Attraverso l’esame delle fonti scritte edite si è cercato di ricostruire il quadro dell’organizzazione territoriale, partendo dalla disamina dei centri di potere laici ed ecclesiastici che a questa area avevano rivolto il proprio interesse patrimoniale e politico, ma proponendo in modo analitico i dati che forniscono indicazioni dirette in relazione all’organizzazione insediativa e quindi alla gestione del territorio dal punto di vista socioeconomico. E’ stato posto in risalto il carattere di un insediamento rurale a maglie larghe, secondo la scansione in fundi e la presenza di poli di accentramento importanti come pievi, castra, vici e con una compresenza, per quanto ristretta a pochi esempi significativi, di altre forme di organizzazione come la curtis e la massa. Con la prosecuzione dello studio del territorio in senso diacronico, prima la scomparsa del riferimento al Saltopiano, poi la progressiva conquista del contado da parte del Comune di Bologna ha determinato un vero e proprio mutamento nell’approccio di analisi. E’ stato dato spazio all’analisi di fondi inediti (conservati principalmente all’Archivio di Stato di Bologna) e specificamente legati alla realtà territoriale studiata. In primo luogo, sono stati esaminati gli estimi del contado (Galliera e Massumatico), una fonte già frequentata in passato da altri studiosi, soprattutto con un interesse dal punto di vista demografico e economico. Nel caso specifico, sono stati estrapolati dalle prime rilevazioni fiscali del 1235 e del 1245 e poi da quelle di primo Trecento i dati che restituiscono l’organizzazione del territorio in modo concreto. Partendo dalle riflessioni di studi svolti in passato, che avevano considerato il fondamentale inserimento di importanti famiglie cittadine nella gestione sempre più ampia dei beni agricoli nel contado è stata avviata l’analisi di un altro fondo inedito, quello dei registri del Vicariato di Galliera (in particolare quelli concernenti la denuncia dei “danni dati” sulle proprietà agricole), da cui emerge in modo evidente la presenza di famiglie come i Guastavillani, i Caccianemici, i Lambertini. Tali dati, in associazione a quelli tratti dagli estimi, hanno fornito elementi essenziali per la comprensione del territorio rurale nel suo complesso e nei rapporti di interdipendenza tra le diverse componenti sociali. Una terza parte della tesi è dedicata nella sua totalità all’analisi delle fonti materiali che forniscono dati per lo studio dell’insediamento medievale nel territorio compreso tra gli attuali comuni di S. Pietro in Casale e Galliera. Partendo da alcune ricerche preliminari compiute negli anni ’90 del secolo scorso, è stato impostato un progetto di ricerca archeologica articolatosi in due campagne di ricognizione di superficie e in una prima campagna di scavo tramite sondaggio presso la torre di Galliera, al fine di ricavare dati di prima mano in un’area pressoché inesplorata dal punto di vista archeologico. Nonostante i limiti riscontrati dal punto di vista pratico, a causa del terreno fortemente alluvionato, si sono raccolti dati specifici che aiutano a inquadrare questo comprensorio e a confrontarlo con altre aree della regione e in particolare del comitato bolognese studiate in ricerche analoghe, mettendone in evidenza le specificità e le caratterizzazioni. Inoltre, alcune importanti persistenze materiali (un sistema di torri di cui rimangono alcuni esempi ancora conservati in alzato) hanno permesso di gettare luce sul valore commerciale e quindi strategico dell’area, soprattutto in funzione del passaggio delle merci lungo una via fluviale fondamentale tra XIII-XIV secolo nel collegare Ferrara a Bologna.

A minimally destructive technique for removing the smear layer from dentine surfaces

OBJECTIVES: To develop a minimally destructive technique for removing the smear layer produced by cutting and polishing specimens of dentine prepared for use in experimental studies, e.g. on occlusion of dentinal tubules by oral health products. The aim was to avoid the damage caused by conventional techniques utilising short exposures to solutions with very low pH. METHODS: Two acetate buffers, pH 5.5, containing different concentrations of calcium and phosphate, with -log(ion activity product with respect to hydroxyapatite) (pI(HA)) of 55 or 56, were tested on slices of dentine using scanning electron microscopy (SEM). RESULTS: A solution which, from previous work, was slightly undersaturated with respect to dentine mineral, with a pI(HA) of 56, was found to remove smear layers produced by cutting and/or polishing after 15 min. However, to reliably remove debris occluding the tubules an exposure time of 2h, followed by brief ultrasonication, was necessary. After 2h treatment with this buffer, only a small amount of demineralization of the surface was detectable by SEM, while calcium and phosphorus were detectable by X-ray dispersive spectroscopy. CONCLUSION: It is possible to remove smear layers, and to open dentinal tubules, by a reasonably short exposure to an acidic buffer which is undersaturated with respect to dentine mineral.

Second-Generation Orthopaedic Measurement Device for in-vivo Assessment of Bone Quality

There are two main types of bone in the human body, trabecular and cortical bone. Cortical bone is primarily found on the outer surface of most bones in the body while trabecular bone is found in vertebrae and at the end of long bones (Ross 2007). Osteoporosis is a condition that compromises the structural integrity of trabecular bone, greatly reducing the ability of the bone to absorb energy from falls. The current method for diagnosing osteoporosis and predicting fracture risk is measurement of bone mineral density. Limitations of this method include dependence on the bone density measurement device and dependence on type of test and measurement location (Rubin 2005). Each year there are approximately 250,000 hip fractures in the United States due to osteoporosis (Kleerekoper 2006). Currently, the most common method for repairing a hip fracture is a hip fixation surgery. During surgery, a temporary guide wire is inserted to guide the permanent screw into place and then removed. It is believed that directly measuring this screw pullout force may result in a better assessment of bone quality than current indirect measurement techniques (T. Bowen 2008-2010, pers. comm.). The objective of this project is to design a device that can measure the force required to extract this guide wire. It is believed that this would give the surgeon a direct, quantitative measurement of bone quality at the site of the fixation. A first generation device was designed by a Bucknell Biomedical Engineering Senior Design team during the 2008- 2009 Academic Year. The first step of this project was to examine the device, conduct a thorough design analysis, and brainstorm new concepts. The concept selected uses a translational screw to extract the guide wire. The device was fabricated and underwent validation testing to ensure that the device was functional and met the required engineering specifications. Two tests were conducted, one to test the functionality of the device by testing if the device gave repeatable results, and the other to test the sensitivity of the device to misalignment. Guide wires were extracted from 3 materials, low density polyethylene, ultra high molecular weight polyethylene, and polypropylene and the force of extraction was measured. During testing, it was discovered that the spring in the device did not have a high enough spring constant to reach the high forces necessary for extracting the wires without excessive deflection of the spring. The test procedure was modified slightly so the wires were not fully threaded into the material. The testing results indicate that there is significant variation in the screw pullout force, up to 30% of the average value. This significant variation was attributed to problems in the testing and data collection, and a revised set of tests was proposed to better evaluate the performance of the device. The fabricated device is a fully-functioning prototype and further refinements and testing of the device may lead to a 3rd generation version capable of measuring the screw pullout force during hip fixation surgery.

Metacommunity Dynamics Of Benthic Macroinvertebrates In A Large River

Metacommunity ecology focuses on the interaction between local communities and is inherently linked to dispersal as a result. Within this framework, communities are structured by a combination of in-site responses to the immediate environment (species sorting), stochasticity (patch dynamics), and connections to other communities via distance between communities and dispersal (neutrality), and source-sink dynamics (mass effects; see Chapter 1 for a detailed description of metacommunity theory, the study site, and macroinvertebrate communities found). In Chapter 2 I describe spatial scale of study and dispersal ability as both have the ability to influence the degree to which communities interact. However, little is known about how these factors influence the importance of all metacommunity dynamics. I compared dispersal mode of immature aquatic insects and dispersal ability of winged adults across multiple spatial scales in a large river. The strongest drivers of river communities were patch dynamics, followed by species sorting, then neutrality. Active dispersers during aquatic lifestages on average exhibited lower patch dynamics, higher species sorting, and significant mass effects compared to passive dispersers. Active and strong dispersers also had a scale-independent influence of neutrality, while neutrality was stronger at broader spatial scale for passive and weak dispersers. These results indicate as dispersal ability increases patch dynamics decreases, species sorting increases, and neutrality should decrease. The perceived influence of neutrality may also be dependent on spatial scale and dispersal ability. In Chapter 3 I describe how river benthic macroinvertebrate communities may influence tributary invertebrate communities via adult flight and tributaries may influence mainstem communities via immature drift. This relationship may also depend on relative mainstem and tributary size, as well as abiotic tributary influence on mainstem habitat. To investigate the interaction between a larger river and tributary I sampled mainstem benthic invertebrate communities and quantified habitat of a 7th order river (West Branch Susquehanna River) above and below a 5th order tributary confluence, as well as 0.95-3.2 km upstream in the tributary. Non-metric multidimensional scaling showed similar patterns of clustering between sampling locations for both habitat characteristics and invertebrate communities. In addition, mainstem river communities and habitat directly downstream of the tributary confluence cluster tightly together, intermediate between tributary and mid-channel river samples. In Bray-Curtis dissimilarity comparisons between tributary and mainstem river communities the furthest upstream tributary communities were least similar to river communities. Middle tributary samples were also closest by Euclidean distance to the upstream mainstem riffle and exhibited higher similarity to mid-channel samples than the furthest downstream tributary communities. My results indicate river and tributary benthic invertebrate communities may interact and likely result in direct and indirect mass effects of a tributary on the downstream mainstem community by invertebrate drift and habitat restructuring via material delivery from the tributary. I also showed likely direct effects of adult dispersal from the river and oviposition in proximal tributary locations where Euclidian, rather than river, distance may be more important in determining river-tributary interactions.