Investigation on the homogeneity and stability of aqueous nano cellulose suspensions prepared using pluronic F-127

This paper presents the results of experimental investigation on the aqueous dispersion behaviour of micro crystalline cellulose (MCC) prepared using Pluronic F-127. For this purpose, different concentrations (0.5-3.0 wt.%) of MCC were dispersed in water with the help of ultrasonication technique using various concentrations of Pluronic F-127. The homogeneity of the suspensions and agglomerations were characterized by optical and transmission electron microscopy and the concentration of well dispersed MCC was measured using UV-Vis spectroscopy. Also, the suspensions were subjected to high speed ultracentrifugation at 3000 rpm and observed visually for sedimentation and subsequently, concentration was calculated using UV-Vis, in order to assess the long term stability of the suspensions. Based on these experiments, optimum concentration of Pluronic to disperse different MCC concentrations has been suggested.

Libertação fotocontrolada de moléculas bioativas a partir de conjugados de cumarinas

Dissertação de mestrado em Química Medicinal

Flow updating: fault-tolerant aggregation for dynamic networks

Documento submetido para revisão pelos pares. A publicar em Journal of Parallel and Distributed Computing. ISSN 0743-7315

Dynamic wet etching of silicon through isopropanol alcohol evaporation

In this paper, Isopropanol (IPA) availability during the anisotropic etching of silicon in Potassium Hydroxide (KOH) solutions was investigated. Squares of 8 to 40 m were patterned to (100) oriented silicon wafers through DWL (Direct Writing Laser) photolithography. The wet etching process was performed inside an open HDPE (High Density Polyethylene) flask with ultrasonic agitation. IPA volume and evaporation was studied in a dynamic etching process, and subsequent influence on the silicon etching was inspected. For the tested conditions, evaporation rates for water vapor and IPA were determined as approximately 0.0417 mL/min and 0.175 mL/min, respectively. Results demonstrate that IPA availability, and not concentration, plays an important role in the definition of the final structure. Transversal SEM (Scanning Electron Microscopy) analysis demonstrates a correlation between microloading effects (as a consequence of structure spacing) and the angle formed towards the (100) plane.

Design of bio-based supramolecular structures through self-assembly of α-lactalbumin and lysozyme

Bovine α-lactalbumin (α-La) and lysozyme (Lys), two globular proteins with highly homologous tertiary structures and opposite isoelectric points, were used to produce bio-based supramolecular structures under various pH values (3, 7 and 11), temperatures (25, 50 and 75 °C) and times (15, 25 and 35 min) of heating. Isothermal titration calorimetry experiments showed protein interactions and demonstrated that structures were obtained from the mixture of α-La/Lys in molar ratio of 0.546. Structures were characterized in terms of morphology by transmission electron microscopy (TEM) and dynamic light scattering (DLS), conformational structure by circular dichroism and intrinsic fluorescence spectroscopy and stability by DLS. Results have shown that protein conformational structure and intermolecular interactions are controlled by the physicochemical conditions applied. The increase of heating temperature led to a significant decrease in size and polydispersity (PDI) of α-La–Lys supramolecular structures, while the increase of heating time, particularly at temperatures above 50 °C, promoted a significant increase in size and PDI. At pH 7 supramolecular structures were obtained at microscale – confirmed by optical microscopy – displaying also a high PDI (i.e. > 0.4). The minimum size and PDI (61 ± 2.3 nm and 0.14 ± 0.03, respectively) were produced at pH 11 for a heating treatment of 75 °C for 15 min, thus suggesting that these conditions could be considered as critical for supramolecular structure formation. Its size and morphology were confirmed by TEM showing a well-defined spherical form. Structures at these conditions showed to be stable at least for 30 or 90 days, when stored at 25 or 4 °C, respectively. Hence, α-La–Lys supramolecular structures showed properties that indicate that they are a promising delivery system for food and pharmaceutical applications.

Development and characterization of lipid-based nanosystems for controlled release of bioactive compounds

Tese de Doutoramento em Engenharia Química e Biológica.

Integration methods in dynamic analysis

"Series title: Springerbriefs in applied sciences and technology, ISSN 2191-530X"

Dynamic three-dimensional reconstruction of the heart by transesophageal echocardiography

OBJECTIVE: To evaluate echocardiography accuracy in performing and obtaining images for dynamical three-dimensional (3D) reconstruction. METHODS: Three-dimensional (3D) image reconstruction was obtained in 20 consecutive patients who underwent transesophageal echocardiography. A multiplanar 5 MHz transducer was used for 3D reconstruction. RESULTS: Twenty patients were studied consecutively. The following cardiac diseases were present: valvar prostheses-6 (2 mitral, 2 aortic and 2 mitral and aortic); mitral valve prolapse- 3; mitral and aortic disease - 2; aortic valve disease- 5; congenital heart disease- 3 (2 atrial septal defect- ASD - and 1 transposition of the great arteries -TGA); arteriovenous fistula- 1. In 7 patients, color Doppler was also obtained and used for 3D flow reconstruction. Twenty five cardiac structures were acquired and 60 reconstructions generated (28 of mitral valves, 14 of aortic valves, 4 of mitral prostheses, 7 of aortic prostheses and 7 of the ASD). Fifty five of 60 (91.6%) reconstructions were considered of good quality by 2 independent observers. The 11 reconstructed mitral valves/prostheses and the 2 reconstructed ASDs provided more anatomical information than two dimensional echocardiography (2DE) alone. CONCLUSION: 3D echocardiography using a transesophageal transducer is a feasible technique, which improves detection of anatomical details of cardiac structures, particularly of the mitral valve and atrial septum.

Engineering a commercial cold-adapted xylanase for improved low pH stability

Dissertação de mestrado em Genética Molecular

Laccase immobilization on bacterial nanocellulose membranes: antimicrobial, kinetic and stability properties

This work studied the physical immobilization of a commercial laccase on bacterial nanocellulose (BNC) aiming to identify the laccase antibacterial properties suitable for wound dressings. Physico-chemical analysis demonstrates that the BNC structure is manly formed by pure crystalline I cellulose. The pH optimum and activation energy of free laccase depends on the substrate employed corresponding to pH 6, 7, 3 and 57, 22, 48 kJ mol1 for 2,6-dimethylphenol (DMP), catechol and 2,2 -azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), respectively. The Michaelis-Menten constant (Km) value for the immobilized laccase (0.77 mM) was found to be almost double of that of the free enzyme (0.42 mM). However, the specific activities of immobilized and free laccase are similar suggesting that the cage-like structure of BNC allows entrapped laccase to maintain some flexibility and favour substrate accessibility. The results clearly show the antimicrobial effect of laccase in Gram-positive (92%) and Gram-negative (26%) bacteria and cytotoxicity acceptable for wound dressing applications.

Development of nanohydrogels as a vehicle for the release of bioactive compounds in food matrices

PhD in Chemical and Biological Engineering

Patrones dinámicos de abundancia y dispersión de una plaga en un paisaje heterogéneo. Dynamic patterns of abundance and dispersion of a pest in a heterogeneous landscape.

El desarrollo de conocimiento empírico sobre cómo la heterogeneidad espacial de un paisaje afecta los patrones de movimiento de una especie animal es considerado una prioridad para el manejo y la conservación de las especies y sus hábitats. En el caso de los insectos plaga, estos estudios resultan importantes ya que aportan las bases teóricas y empíricas fundamentales para su manejo. La persistencia de éstas especies en un paisaje modificado depende de la interrelación entre procesos ecológicos y la estructura del paisaje, tales como la interacción entre especies, la disponibilidad de parches hábitat y la influencia de las prácticas de manejo. El análisis de éstos procesos en un agroecosistema permite simplificar los modelos de heterogeneidad espacial, debido a que los lotes de cultivo son internamente homogéneos y los disturbios antropogénicos generalmente ocurren a la escala de parche, permitiendo determinar las respuestas de los insectos a dicha escala. La alfalfa (Medicago sativa) es un recurso fundamental para la producción agropecuaria y en Argentina, es el recurso forrajero más importante, constituyendo la base de la producción ganadera del país. Actualmente se cultivan alrededor de 5 millones de hectáreas, de las cuales un millón se siembran en la provincia de Córdoba. Además, cumple un rol importante en la sustentabilidad de los sistemas de producción por su función de recuperación de la fertilidad y estabilidad edáfica. La isoca de la alfalfa (Colias lesbia) es la plaga principal del cultivo, produciendo en promedio la pérdida de un corte por año. La hipótesis principal de nuestro trabajo es que los patrones de abundancia y movilidad de la isoca de la alfalfa son afectados por la estructura del paisaje y las prácticas de manejo. Los objetivos específicos del proyecto son: (a) Establecer el efecto de la estructura del paisaje y y el manejo del cultivo en la abundancia de los distintos estadios de Colias lesbia. (b) Determinar los patrones de dispersión de Colias lesbia en relación a la heterogeneidad espacial del paisaje (c) Generar un modelo predictivo de la abundancia de Colias lesbia según la estructura espacial del paisaje, el clima y el manejo del cultivo. (d) Desarrollar un conjunto de recomendaciones de manejo a escala regional para el control de la isoca de la alfalfa. Para ello se elegirán lotes de alfalfa en la región este de la provincia de Córdoba, en el departamento de San Justo, donde se realizará un relevamiento inicial del área de estudio y se dialogará con los productores. Paralelamente, se realizará una clasificación supervisada del área de estudio a partir de escenas de imágenes Landsat TM. En los parches seleccionados, durante 3 años y durante los meses de verano, se muestrearán quincenalmente los distintos estadios de Colias lesbia. Se realizarán análisis de correlación y regresión entre las variables independientes (métricas de la configuración y dinámica del paisaje) y las variables dependientes, (abundancia media de los diferentes estadios de las poblaciones). Asimismo, se realizarán experimentos de marcado-liberación-recaptura para determinar cómo el movimiento de la especie depende de la estructura del paisaje. Para modelar el movimiento inherente de la especie se combinará la información obtenida en el campo con un modelo de difusión utilizando métodos bayesianos. Se espera obtener modelos que permitan comprender los mecanismos que generan los patrones observados. Con esta información se propondrán lineamientos generales y específicos para un manejo de la isoca de la alfalfa a escala regional. En tal sentido, se espera aportar información para restringir la dispersión de la plaga, y reducir los costos y perjuicios del control químico que podrían evitarse con la aplicación de prácticas de manejo integrado y de "manejo de área" que minimicen el impacto de la plaga como también contribuir al conocimiento general de la ecología de insectos.

Optimal scheduling with uncertainty in the numerical data on the basis of a stability analysis

Scheduling, job shop, uncertainty, mixed (disjunctive) graph, stability analysis

Dynamic potential fields for guided exploration in virtual environments

Dynamic potential fields, guided exploration, virtual environments, navigation

Dynamic presentations for illustration purposes

Dynamics, presentation, illustration, computer graphics, temporal modelling, non-photorealistic rendering