Development of Novel Assays for Measuring Different Molecular Forms of Prostate Specific Antigen

Prostate cancer (PCa) is the most commonly diagnosed non-skin cancer and second leading cause of cancer-related death of men in developed countries. Measurement of prostate specific antigen (PSA) is a very sensitive method for diagnosing and monitoring of prostate cancer (PCa), but the specificity needs improvement. Measurements of different molecular forms of PSA have been shown to improve differentiation between PCa and benign prostatic diseases. However, accurate measurement of some isoforms has not been achieved in previous assays. The aim of the present study was to develop new assays that reliably measure enzymatically active PSA, PSA-α1-chymotryposin (PSA-ACT) and PSA-α1-protease inhibitor (PSA-API), and to evaluate their diagnostic value. Double-label immunofluorometric assays using a novel monoclonal antibody (MAb) and another antibody to either free PSA (fPSA) or total PSA (tPSA) were developed and used to measure PSA-ACT and fPSA or tPSA at the same time. These assays provide enough sensitivity for measurement of PSA-ACT in sera with low PSA levels. The results obtained confirmed that proportion of PSA-ACT to tPSA (%PSA-ACT) was as useful as proportion of fPSA to tPSA (%fPSA) for discrimination between PCa and benign prostatic hyperplasia (BPH). We developed an immunoassay for detection of PSA-API based on proximity ligation, which improved assay sensitivity 10-fold compared with conventional assays. Our results confirmed previous findings that the PSA-API level is somewhat lower in men with than without PCa, and the combination of %fPSA and proportion of PSA-API to tPSA (%PSA-API) provides diagnostic improvement compared with either method alone. Assays based on this principle should be applicable to other immunoassays in which the nonspecific background is a problem. An immunopeptidometric sandwich assay (IPMA) was developed to measure the enzymatically active PSA. This assay showed high specificity, but sensitivity was not good enough for measurement of PSA concentrations in the gray zone, 2-10 µg/L, in which tPSA does not efficiently differentiate between PCa and BPH. We further developed a solid-phase proximity ligation immunoassay, which provided a 10-fold improvement in sensitivity. This proof of concept study shows that peptides reacting with proteins are potentially useful for sensitive and specific measurement of protein variants for which specific MAbs cannot be obtained.

Identification of novel target genes in different subtypes of cutaneous T-cell lymphoma

Ihon T-solulymfoomat (cutaneous T-cell lymphoma, CTCL) ovat ryhmä imukudossyöpiä, joiden esiintyvyys on nousussa erityisesti länsimaissa. Taudin syntymekanismit ovat suurelta osin tuntemattomat, diagnostiikka on vaikeaa ja siksi usein viivästynyttä eikä parantavaa hoitoa ole. CTCL ilmenee iho-oirein, vaikka syöpäsolut eivät ole iholla normaalisti esiintyviä soluja, vaan elimistön puolustusjärjestelmän soluja, jotka ovat tuntemattomasta syystä vaeltaneet iholle. Syöpäsolut ovat kypsiä T-auttajasoluja (Th-soluja) ja ilmentävät tyypin 2 immuunivasteelle ominaisia sytokiineja. Kromosomaalinen epästabiilius on tautiryhmän keskeinen piirre. CTCL-potilailla on lisääntynyt riski sairastua myös muihin syöpiin, erityisesti keuhkosyöpään ja non-Hodgkin –lymfoomiin. Väitöskirjatutkimuksen tavoitteena oli havaita CTCL:n syntymekanismeja selvittäviä kromosomi- ja geenimuutoksia. Erityisesti tavoitteena oli identifioida molekyylejä, jotka soveltuisivat diagnostisiksi merkkiaineiksi tai täsmähoidon kohteeksi. Työssä on tutkittu kahta tautiryhmän yleisintä muotoa, mycosis fungoidesta (MF) ja Sezaryn syndroomaa (SS) sekä harvinaisempaa vaikeasti diagnosoitavaa subkutaanista pannikuliitin kaltaista T-solulymfoomaa (SPTL). Lisäksi on tutkittu CTCL:ään liittyvää keuhkosyöpää ja verrattu sitä tavalliseen (primaariin) keuhkosyöpään. Tutkimusmenetelminä on käytetty esimerkiksi molekyylisytogeneettisiä metodeja ja mikrosiruja. Väitöskirjatyössä havaittiin ensimmäinen CTCL:lle ominainen toistuva geenitason muutos: puutos- tai katkoskohta NAV3-geenissä. Tämän geenipoikkeavuuden havaittiin esiintyvän useissa taudin alaryhmissä (MF, SS, SPTL). NAV3-geenipuutoksen osoittaminen FISH-tekniikalla on sovellettavissa kliiniseen diagnostiikkaan. Tutkimukset geenipuutoksen aiheuttamista toiminnallisista seurauksista ovat käynnissä. Työssä saatiin myös uutta tietoa taudin syntymekanismeista havaitsemalla useiden Th1-tyypin immuunivasteelle ominaisten geenien alentunut ilmeneminen CTCL-potilailla. Tämän lisäksi potilasnäytteissä havaittiin eräiden solun pinta-antigeenien lisääntynyt ilmeneminen, mikä luo pohjan uusien vasta-ainepohjaisten täsmähoitojen kehittämiselle. Väitöskirjatutkimuksessa todettiin myös CTCL:ään liittyvän keuhkosyövän eroavan kromosomi- ja geenimuutosten suhteen verrokkikeuhkosyövästä, mikä jatkossa antaa aiheen tutkia syöpäkantasolujen merkitystä CTCL:n ja sen liitännäiskasvainten kehittymisen taustalla.

Bio-inspired multifunctional metallic foams through the fusion of different biological solutions

Nature is a school for scientists and engineers. Inherent multiscale structures of biological materials exhibit multifunctional integration. In nature, the lotus, the water strider, and the flying bird evolved different and optimized biological solutions to survive. In this contribution, inspired by the optimized solutions from the lotus leaf with superhydrophobic self-cleaning, the water strider leg with durable and robust superhydrophobicity, and the lightweight bird bone with hollow structures, multifunctional metallic foams with multiscale structures are fabricated, demonstrating low adhesive superhydrophobic self-cleaning, striking loading capacity, and superior repellency towards different corrosive solutions. This approach provides an effective avenue to the development of water strider robots and other aquatic smart devices floating on water. Furthermore, the resultant multifunctional metallic foam can be used to construct an oil/water separation apparatus, exhibiting a high separation efficiency and long-term repeatability. The presented approach should provide a promising solution for the design and construction of other multifunctional metallic foams in a large scale for practical applications in the petro-chemical field. Optimized biological solutions continue to inspire and to provide design idea for the construction of multiscale structures with multifunctional integration. Inspired by the optimized biological solutions from the lotus leaf with superhydrophobic self-cleaning, the water strider leg with durable and robust superhydrophobicity, and the lightweight bird bone with hollow structures, multifunctional metallic foams with multiscale structures are fabricated, demonstrating low adhesive superhydrophobic self-cleaning, striking loading capacity, stable corrosion resistance, and oil/water separation.

Modeling transport through an environment crowded by a mixture of obstacles of different shapes and sizes

Many biological environments are crowded by macromolecules, organelles and cells which can impede the transport of other cells and molecules. Previous studies have sought to describe these effects using either random walk models or fractional order diffusion equations. Here we examine the transport of both a single agent and a population of agents through an environment containing obstacles of varying size and shape, whose relative densities are drawn from a specified distribution. Our simulation results for a single agent indicate that smaller obstacles are more effective at retarding transport than larger obstacles; these findings are consistent with our simulations of the collective motion of populations of agents. In an attempt to explore whether these kinds of stochastic random walk simulations can be described using a fractional order diffusion equation framework, we calibrate the solution of such a differential equation to our averaged agent density information. Our approach suggests that these kinds of commonly used differential equation models ought to be used with care since we are unable to match the solution of a fractional order diffusion equation to our data in a consistent fashion over a finite time period.

Design considerations and economics of different shaped surface aeration tanks

This paper deals with the design considerations of surface aeration tanks on two basic issues of oxygen transfer coefficient and power requirements for the surface aeration system. Earlier developed simulation equations for simulating the oxygen transfer coefficient with theoretical power per unit volume have been verified by conducting experiments in geometrically similar but differently shaped and sized square tanks, rectangular tanks of length to width ratio (L/W) of 1.5 and 2 as well as circular tanks. Based on the experimental investigations, new simulation criteria to simulate actual power per unit volume have been proposed. Based on such design considerations, it has been demonstrated that it is economical (in terms of energy saving) to use smaller tanks rather than using a bigger tank to aerate the same volume of water for any shape of tanks. Among the various shapes studied, it has been found that circular tanks are more energy efficient than any other shape.

Coordination polymers and hybrid networks of different dimensionalities formed by metal sulfites

In our effort to explore the use of the sulfite ion to design hybrid and open-framework materials, we have been able to prepare, under hydrothermal conditions, zero-dimensional [Zn(C12H8N2)(SO3)]center dot 2H(2)O, I (a = 7.5737(5) angstrom, b = 10.3969(6) angstrom, c = 10.3986(6) angstrom, alpha = 64.172(1)degrees, beta = 69.395(1)degrees, gamma = 79.333(1)degrees, Z = 2, and space group P (1) over bar), one-dimensional [Zn-2(C12H8N2)(SO3)(2)(H2O)], II (a = 8.0247(3) angstrom, b = 9.4962(3) angstrom, c = 10.2740(2) A, alpha = 81.070(1)degrees, beta = 80.438(1)degrees, gamma = 75.66(5)degrees, Z = 2, and space group P (1) over bar), two-dimensional [Zn-2(C10H8N2)(SO3)(2)]center dot H2O, III (a = 16.6062(1) angstrom, b = 4.7935(1) angstrom, c = 19.2721(5) angstrom, beta = 100.674(2)degrees, Z = 4, and space group C2/c), and three-dimensional [Zn-4(C6H12N2)(SO3)(4)(H2O)(4)], IV (a = 11.0793(3) angstrom, c = 8.8246(3) angstrom, Z = 2, and space group P42nm), of which the last three are coordination polymers. A hybrid open-framework sulfite-sulfate of the composition [C2H10N2][Nd(SO3)(SO4)(H2O)](2), V (a = 9.0880(3) angstrom, b = 6.9429(2) angstrom, c = 13.0805(5) A, beta = 91.551(2)degrees, Z = 2, and space group P2(1)/c), with a layered structure containing metal-oxygen-metal bonds has also been described.

Spectroscopic investigations and luminescence spectra of Nd3+ and Dy3+ doped different phosphate glasses

Spectral properties of Nd3+ and Dy3+ ions in different phosphate glasses were studied and several spectroscopic parameters were reported. Covalency of rare-earth-oxygen bond was studied in these phosphate glass matrices with the variation of modifier in host glass matrix Using Judd-Ofelt intensity parameters (Omega(2), Omega(4) and Omega(6)), radiative transition probabilities (A) and radiative lifetimes (tau(R)) of certain excited states of Nd3+ and Dy3+ ions are estimated in these glass matrices. From the magnitudes of branching ratios (beta(R)) and integrated absorption cross-sections (Sigma), certain transitions of both the ions are identified for laser excitation. From the emission spectra, peak stimulated emission cross-sections (sigma(P)) are evaluated for the emission transitions observed in all these phosphate glass matrices for both Nd3+ and Dy3+ ions. (C) 2009 Elsevier B.V. All rights reserved.

Comparison of the sensitivity of different sensor technologies to imbalance severity in low speed wind turbines

Imbalance is not only a direct major cause of downtime in wind turbines, but also accelerates the degradation of neighbouring and downstream components (e.g. main bearing, generator). Along with detection, the imbalance quantification is also essential as some residual imbalance always exist even in a healthy turbine. Three different commonly used sensor technologies (vibration, acoustic emission and electrical measurements) are investigated in this work to verify their sensitivity to different imbalance grades. This study is based on data obtained by experimental tests performed on a small scale wind turbine drive train test-rig for different shaft speeds and imbalance levels. According to the analysis results, electrical measurements seem to be the most suitable for tracking the development of imbalance.

Evaluation and modelling of the spatial and temporal variability of particulate matter in urban areas

This thesis contains three subject areas concerning particulate matter in urban area air quality: 1) Analysis of the measured concentrations of particulate matter mass concentrations in the Helsinki Metropolitan Area (HMA) in different locations in relation to traffic sources, and at different times of year and day. 2) The evolution of traffic exhaust originated particulate matter number concentrations and sizes in local street scale are studied by a combination of a dispersion model and an aerosol process model. 3) Some situations of high particulate matter concentrations are analysed with regard to their meteorological origins, especially temperature inversion situations, in the HMA and three other European cities. The prediction of the occurrence of meteorological conditions conducive to elevated particulate matter concentrations in the studied cities is examined. The performance of current numerical weather forecasting models in the case of air pollution episode situations is considered. The study of the ambient measurements revealed clear diurnal variation of the PM10 concentrations in the HMA measurement sites, irrespective of the year and the season of the year. The diurnal variation of local vehicular traffic flows seemed to have no substantial correlation with the PM2.5 concentrations, indicating that the PM10 concentrations were originated mainly from local vehicular traffic (direct emissions and suspension), while the PM2.5 concentrations were mostly of regionally and long-range transported origin. The modelling study of traffic exhaust dispersion and transformation showed that the number concentrations of particles originating from street traffic exhaust undergo a substantial change during the first tens of seconds after being emitted from the vehicle tailpipe. The dilution process was shown to dominate total number concentrations. Minimal effect of both condensation and coagulation was seen in the Aitken mode number concentrations. The included air pollution episodes were chosen on the basis of occurrence in either winter or spring, and having at least partly local origin. In the HMA, air pollution episodes were shown to be linked to predominantly stable atmospheric conditions with high atmospheric pressure and low wind speeds in conjunction with relatively low ambient temperatures. For the other European cities studied, the best meteorological predictors for the elevated concentrations of PM10 were shown to be temporal (hourly) evolutions of temperature inversions, stable atmospheric stability and in some cases, wind speed. Concerning the weather prediction during particulate matter related air pollution episodes, the use of the studied models were found to overpredict pollutant dispersion, leading to underprediction of pollutant concentration levels.

Rural first year university students: As engaged, aspirational and motivated as anyone – but different science ‘choices’ in year 12 and university

This paper reports on findings from the Interests and Recruitment in Science study, which explored the experiences of first year students studying science, technology, engineering and mathematics (STEM) courses in Australian universities. First year STEM students who went to school in rural or regional areas were as engaged, aspirational and motivated as their more metropolitan counterparts. However, they were less likely to have studied physics or advance mathematics, and more likely to have enrolled in an Agricultural or Environmental Science degree. The relationships between these results and broader contextual issues such as employment and Higher Education budgetary and policy settings are discussed.

Developing the helping relationship: Engaging with clients in different contexts

"Human service workers need more than just common sense. This book offers a comprehensive introduction to practice skills required across the human service sector. The authors use critical analysis to systematically outline the key stages of interaction with clients."--Libraries Australia "A thorough introduction to the core practice skills needed by social work and welfare professionals. Human service workers need more than just common sense. Practice Skills in Social Work and Welfare offers a comprehensive introduction to practice skills required across the human service sector. The authors use critical analysis to systematically outline the key stages of interaction with clients: engagement, assessment, intervention and evaluation. Drawing on a strengths approach, they examine the skills needed for working with different types of clients: individuals, families and community groups. They also explore the dilemmas faced in daily practice, including the challenges of working with involuntary clients, clients from different cultural backgrounds, and clients in crisis situations. Practice Skills in Social Work and Welfare provides a model of integrated practice which incorporates the key components of ideology, theory, phase, skill and context. Detailed case studies demonstrate how welfare services can be delivered in different contexts. Written by experienced teachers and practitioners from Australia and New Zealand, Practice Skills in Social Work and Welfare is a practical and user friendly text for students and reference for practitioners"--Publisher website

Developing the helping relationship: Engaging with clients in different contexts

"Fully revised edition of this widely used introduction to the core practice skills needed by social work and other human service professionals. 'The main strength of the book is the consistency of its themes throughout the text.I would like to commend the editors of this book for the contribution it should make to practice teaching with social work and welfare' - Karen Heycox in Australian Social Work Human service workers need more than just common sense. Practice Skills in Social Work and Welfare offers a comprehensive introduction to practice skills required across the human service sector. The authors use critical analysis to systematically outline the key stages of interaction with clients: engagement, assessment, intervention and evaluation. Drawing on a strengths approach, they examine the skills needed for working with different types of clients: individuals, families and community groups. They also explore the dilemmas faced in daily practice, including the challenges of working with involuntary clients, clients from different cultural backgrounds, and clients in crisis situations. Practice Skills in Social Work and Welfare provides a model of integrated practice which incorporates the key components of ideology, theory, phase, skill and context. Detailed case studies demonstrate how welfare services can be delivered in different contexts. This second edition has been thoroughly revised and updated and includes new material on online services and strengths-based practice. Written by experienced teachers and practitioners from Australia and New Zealand, Practice Skills in Social Work and Welfare is a practical and user friendly text for students and reference for practitioners."--Publisher website