Comparação dos efeitos de compressão isostática e compressão uniaxial na obtenção da liga NiTi por metalurgia do pó

Several alloys present the shape memory effect and among them, the equiatomic NiTi alloy, nitinol, is the most important one. It is usually used in several engineering applications and also in biomedical devices, in the fabrication of orthodontic wire, stents and Judet staples. Although a considerable amount of these biomedical devices is utilized in Brazil and a fraction of it is already made here, all nitinol used is bought abroad. Thus, it is important to develop the necessary know-how to fabricate NiTi wire and sheet. It would mean less importation with job creation and wealth generation for the country. In this work nitinol was obtained powder metallurgy from elemental powders of Ti and Ni using uniaxial compression and uniaxial compression followed by isostatic compression. The final densities achieved were determined by the Archimedes method. The precipitation of intermetallic secondary phases was studied and the samples were characterized by metallographic analysis, optical microscopy and X-ray diffraction. Results indicated that 50 hours sintering route showed a low amount of intermetallics, and no trace of unreacted powder. XRD and metallography at room temperature indicated B19’ as the predominant phase, which corresponds to martensite. Although density results showed little dispersion, the most dense sample was compacted under uniaxial compression and presented 4.8 g/cm3, corresponding to 20.84% porosity. Density variation was considered normal to the measurement process and independent of the compaction mode

Influência da infecção endodôntica e/ou periodontal associadas à diabetes na quantificação sérica da citocina pró-inflamatória IL-17 e na glicemia de ratos Wistar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de blocos de concreto com resíduo de borracha de pneu e metacaulim

Pós-graduação em Engenharia Civil - FEIS

Modificação de forma e dimensões dos arcos superior e inferior obtidas em modelos de estudo após expansão rápida da maxila com o aparelho hyrax

The aim of an orthodontic treatment is the achievement of a balanced, esthetic and, most of all, stable, intra and inter arches relationship. A common problem observed in occlusion is posterior crossbite and atresic maxilla. This problem may be treated by slow expansion, rapid expansion or surgically assisted expansion. For the present study cast models of 14 children between 7 and 11 years old were evaluated. There were 7 male and 7 female subjects that presented posterior crossbite and needed rapid maxillary expansion. The Hyrax appliance performed the therapy for correction of this transversal alteration, which is a common possibility in the treatment of this malocclusion. It was observed that the distance between the upper first molars and upper cuspids increased significantly; the length of the upper arch decreased and its perimeter increased significantly. At the lower arch there were no dimensional changes.

Extração de incisivo inferior: uma alternativa no tratamento da classe III

The correction of a Class III malocclusion in adult patients is one of the major challenges in orthodontics due to facial deformities occurring during the unfavorable growth of this kind of pattern, as well as the treatment options capable of producing facial changes aesthetically acceptable and adequate for today's beauty standards. One acceptable alternative treatment is the removal of a lower incisor. For a Class III correction through a lower incisor extraction a thorough analysis and planning must be carried out by taking into consideration the amount of overjet and overbite, periodontal condition of the teeth and the possibility of obtaining a good dental occlusion with acceptable facial aesthetics. Will be presented two case reports of patients presenting an anteroinferior crowding, Class III malocclusion condition. The treatment through a lower incisor extraction and the reasons why this treatment was adopted will be discussed.

Estudo mecânico comparativo da estabilização de fratura ilíaca com dois tipos de implantes (parafusos com placa de compressão dinâmica e parafusos associados ao polimetilmetacrilato) em hemipelves caninas sintéticas

Pós-graduação em Cirurgia Veterinária - FCAV

Aspectos morfológicos da veia efálica na trombose aguda experimental e na aplicação de cateter de Fogarty em equinos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do ângulo nasolabial, em radiografias cefalométricas laterais, dividido em ângulo superior e inferior, por uma linha paralela ao plano de frankfort, em índividuos portadores de má-oclusão classe II e classe III de angle

Pós-graduação em Biopatologia Bucal - ICT

Avaliação histométrica das áreas de tração e compressão do periodonto dos primeiros molares de ratos submetidos à movimentação dentária induzida

Metidos a movimentação dentária induzida. Métodos: utilizou-se 30 ratos Wistar, divididos em três grupos (GI, GII e GIII), compostos por 10 animais cada e sacrificados, respectivamente, 7, 14 e 21 dias após o início do experimento. Os valores médios individuais dos grupos experimentais foram comparados com seu respectivo controle por meio do teste Mann-Whitney. Comparou-se, também, os valores entre regiões em um mesmo período de tempo e, ainda, entre períodos de tempo diferentes em uma mesma região através da Análise de Variância (ANOVA), Kruskal-Wallis e subsequente teste de Tukey. Resultados: os grupos GI e GII exibiram a dimensão do LPD diminuída nas regiões apical da raiz mesiovestibular e cervical da raiz distovestibular, e aumentada nas regiões cervical da raiz mesiovestibular, apical da raiz distovestibular e média de ambas as raízes. Conclusão: a diminuição e o aumento da dimensão do LPD evidenciada em uma mesma raiz — mesiovestibular ou distovestibular —, caracterizou o movimento dentário no sentido de inclinação. As três regiões, apical, média e cervical, comparadas entre si em cada período de tempo, bem como os três períodos de tempo, 7, 14 e 21 dias, comparados entre si em cada região, confirmaram o movimento de inclinação em GI e GII, e a diminuição gradual da intensidade dos fenômenos de GI para GII, até o restabelecimento da normalidade dimensional em GIII.

Efeito dos parâmetros de retificação no acabamento superficial de cerâmicas aplicadas à biomateriais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Paleocorrentes e paleogeografia do Grupo Aerado, cretáceo inferior da Bacia Sanfranciscana

The Areado Group of the Sanfranciscana Basin is a Lower Cretaceous continental sedimentary system that is correlated to the Brazilian Pre-Salt beds. The Aerado Group is composed of Abaeté, Quiricó and Três Barras formations. Paleocurrent data for the Areado Group were previously presented, although not systematically which prevented significative interpretations on the basin paleogeography. This work attempts to systematically evaluate paleocurrent data, aiming to recognize depositional environment and paleogeographic reconstruction, based on the sedimentary facies and paleocurrents measurements along vertical profiles. Fluvial paleocurrents of the Abaeté Formation indicate paleoflows towards NW whereas aeolian palecurrents of the Três Barras Formation show paleowinds towards SW. The depositional systems interpreted for the Areado Group were: braided river, alluvial fan, lacustrine, playa lake, fluvial-deltaic and aeolian. The combined analyses of facies and paleocurrents allowed a reliable paleogeographic reconstruction of the basin, with paleodip towards northwest, paleowinds towards south-southwest and source-area located at southeast. These results indicate that paleowinds were orthogonal to paleostream, but parallel to depositional strike of the basin. The interpreted depositional systems characterize a desert environment during the Abaeté sub-basin times. The association of dunes and wet interdunes followed by large scale dunes and dry interdunes suggests a decrease in humidity towards the top of the Três Barras Formation, with a dry aeolian system onlapping the basement. The observed decrease of humidity in Sanfranciscana Basin may reflect local or regional paleoclimatic changes during the opening of the South Atlantic, but this assumption is only tentative

Análise paleopalinológica do Albiano (Cretáceo inferior) da Bacia de Campos, com ênfase no estudo de dinoflagelados

Pós-graduação em Geociências e Meio Ambiente - IGCE

Desempenho mecânico de embalagens rígidas utilizadas na indústria agroquímica: estudo de compressão

The world population is growing at exponential scales, thus the demand for food grows significantly. The use of pesticides is seen as a way to meet the demand for food and increase the efficiency and productivity of the agricultural sector. BASF SA in partnership with packaging suppliers represent a remarkable scene in the Brazilian market in the agrochemicals sector. In 2014, the Department of Agro from BASF Packaging, identified in its production process certain deformation of its rigid packaging during the filling process of pesticides. This phenomenon is probably caused by the low resistance to compression that the package is used. In order to eliminate the deformation of rigid packaging arising from the filling step, a study will be conducted in conjunction with the supplier JET UNIPAC whose on line problems occurred more frequently. The study is to identify the strength of the rigid containers standardize a compression resistance value at which the package is not deformed after the filling step. This study will present an investigation through experiments combined with theoretical concepts in order to determine possible causes for the emergence of this phenomenon. At the end of the study, a solution to eliminate or reduce to the maximum the packaging deformation problem appears

Avaliação de lubrificantes para aplicação em componentes mecânicos pelo método de compressão do anel

The current lubricants are getting better with advancing technology and more specific to each case of application. Its use is directly linked to the level of waste by friction generated between objects in direct contact and it is essential to promote greater durability of mechanical components. This study refers to behavioral assessment of some types of lubricants and rank among them which one presents the lowest friction between metal components. For this work, will be used the method of ring compression test (RCT), after performed tests and analyzed the results, will be possible to report which lubricant will bring the best reduction in friction. The need for this work was given initially by the observation that some mechanical projects developed at FEG does not conduct in-depth studies the lubricants used. Therefore this study aims to provide better support to these projects. In this work were used five different lubricants, three oils and two greases.