Melhoria do Sistema de Gestão de Stocks da FUTE - Fábrica de Utilidades de Tubo, SA

Face à atual crise económica, cada vez mais as empresas procuram ganhar vantagens competitivas através da implementação da sua melhoria contínua. Uma das vertentes deste processo consiste na melhoria da gestão de stocks. O presente trabalho tem como objetivo o desenvolvimento de um projeto que visa a melhoria do sistema de gestão de stocks da FUTE – Fábrica de Utilidades de Tubo, SA. A principal motivação para o desenvolvimento deste trabalho teve como base as lacunas e falhas constatadas num departamento que é crítico para o desenvolvimento de todo o processo produtivo. O trabalho envolveu a utilização de modelos de gestão de stocks o que fez com que, através de cálculos efetuados, diminuísse o risco de rutura de materiais. Além disso, envolveu as várias etapas da técnica dos 5S’s, bem como a Gestão Visual garantindo, assim, os locais arrumados, limpos, seguros e devidamente identificados. Estas técnicas foram aplicadas em diferentes locais da empresa e, após essa implementação, verificou-se, por parte dos trabalhadores, uma redução de tempos no que toca à procura e identificação de materiais necessários para a linha de montagem. Essa redução de tempos foi também sentida por parte do responsável pelos stocks pois, com estas alterações, os materiais ficam mais acessíveis e mais fáceis de identificar aquando da sua verificação. Os resultados alcançados traduziram-se num aumento dos níveis de produtividade e qualidade, bem como um aumento da satisfação dos trabalhadores, que se traduz numa alteração de mentalidades e comportamentos.

Envenoming by coral snakes (Micrurus) in Argentina, during the period between 1979-2003

Envenomation by coral snakes (Micrurus sp.) is one of the most dangerous injuries in America and it is considered as a serious medical emergency, however bites by these snakes appear to be rare. We analyzed epidemiological data, clinical signs and antivenom use in Argentina during the period between 1979-2003. During this period of study 46 non-fatal Micrurus bites were reported. The majority of cases were men from 31 to 40 years old. Bites occurred primarily in spring and summer. Most cases were reported from the northeast and northwest provinces of the country. The bites were mostly located on hands or feet and occurred mostly during agricultural activities and so mainly involved farmers. Only four cases occurred as a result of handling snakes. The median time it took for antivenom to be administrated was 60 minutes after the bite, and the median number of vials applied was 2. Local pain was mentioned and edema was reported in 41% of patients. All patients recovered without sequelae. This study showed a low incidence of Micrurus bites and low severity of envenomation. However, although no deaths have been reported during the last 30 years, given the toxicity of the venom of Micrurus snakes, the risk of severe envenomation should be considered.

FREQUENCY, URINALYSIS AND SUSCEPTIBILITY PROFILE OF PATHOGENS CAUSING URINARY TRACT INFECTIONS IN ENUGU STATE, SOUTHEAST NIGERIA

Objective: This study was designed to determine the frequency and causative agent(s) of urinary tract infections (UTIs) in individuals with symptoms of urinary tract infections in Enugu State of Southeast Nigeria, and to determine the antibiotic susceptibility pattern of microbial agents isolated from urine culture.Methods: The study involved 211 individuals (149 females and 62 males) clinically suspected for UTI. Urine samples were collected by the mid-stream ‘clean catch’ method and tested using standard procedures. Antibiotic susceptibility of the isolated pathogens was tested using the Kirby-Bauer technique according to the Clinical and Laboratory Standards Institute (CLSI) guidelines.Results: Microscopy of centrifuged urine samples showed 16 patients had pyuria while 54 had pus cells. Calcium oxalate crystals were found in 14 samples. Urinalysis performed with urine samples showed 17 had protein; seven were nitrite positive and three had moderate to high glucose concentration. Fifty-four urine samples (36.2%) from females and 12 (19.4%) from males showed significant growth upon culture. Gram stain and biochemical tests identified nine different organisms with Escherichia coli as the most common isolated species. Forty three randomly selected strains were further tested for their susceptibility against a panel of antibiotics. Thirty isolates (81.08%) were resistant to four or more antibiotics with the highest resistance shown by E. coli (76.67%). All the Gram- negative isolates were resistant to Ampicilox, Cefuroxime and Amoxicillin.Conclusion: Urinary tract infections were found more in females in the area under study. As found in other studies, E. coli was the most predominant isolate, although other organisms seem to be on the increase.

POLYCLONAL OUTBREAK OF BLOODSTREAM INFECTIONS CAUSED BY Burkholderia cepacia COMPLEX IN HEMATOLOGY AND BONE MARROW TRANSPLANT OUTPATIENT UNITS

Aim: The objective was to describe an outbreak of bloodstream infections by Burkholderia cepacia complex (Bcc) in bone marrow transplant and hematology outpatients.Methods: On February 15, 2008 a Bcc outbreak was suspected. 24 cases were identified. Demographic and clinical data were evaluated. Environment and healthcare workers' (HCW) hands were cultured. Species were determined and typed. Reinforcement of hand hygiene, central venous catheter (CVC) care, infusion therapy, and maintenance of laminar flow cabinet were undertaken. 16 different HCWs had cared for the CVCs. Multi-dose heparin and saline were prepared on counter common to both units.Findings: 14 patients had B. multivorans(one patient had also B. cenopacia), six non-multivorans Bcc and one did not belong to Bcc. Clone A B. multivorans occurred in 12 patients (from Hematology); in 10 their CVC had been used on February 11/12. Environmental and HCW cultures were negative. All patients were treated with meropenem, and ceftazidime lock-therapy. Eight patients (30%) were hospitalized. No deaths occurred. After control measures (multidose vial for single patient; CVC lock with ceftazidime; cleaning of laminar flow cabinet; hand hygiene improvement; use of cabinet to store prepared medication), no new cases occurred.Conclusions: This polyclonal outbreak may be explained by a common source containing multiple species of Bcc, maybe the laminar flow cabinet common to both units. There may have been contamination by B. multivorans (clone A) of multi-dose vials.

SIXTEEN YEARS OF PITYRIASIS VERSICOLOR IN METROPOLITAN AREA OF PORTO ALEGRE, SOUTHERN BRAZIL

SUMMARY Pityriasis versicolor is the most common of the diseases caused by Malasseziayeasts. The aim of this study is to determine the prevalence of pityriasis versicolor and its etiological aspects in the metropolitan area of Porto Alegre, Brazil. A retrospective crosssectional study with data from patients of a reference hospital from 1996 to 2011 was performed. Collected data included: date, age, gender, ethnicity, anatomical region of lesion and the direct mycological examination results. Among the positive results in the direct mycological examination, 5.8% (2,239) were positive for pityriasis versicolor. The angular coefficient (B) was -0.3%/year, showing a decrease over the years. The disease was more prevalent in men (7.1% of men versus 5.1% of women that underwent the direct mycological examination); younger age (median 31 years old); "pardo" and black people (3.7% more than expected in the sample); trunk (73.44% of the affected anatomic sites). Lesions in rare sites (groin, genitals, legs, feet and hands) were also observed in this study. In conclusion, due to the decrease in the prevalence of pityriasis versicolor, long-term epidemiological studies in the metropolitan area of Porto Alegre, Brazil, are needed to continue the monitoring of this disease.

Tradução, adaptação e legendagem de textos poéticos

A legendagem, sendo um modo de tradução audiovisual muito peculiar, implica verter um discurso oral, real ou ficcionado, para texto escrito. A primeira questão que nos colocamos é, como será isto exequível, sem se perder uma parte significativa do discurso oral: os elementos paralinguísticos? Depois, o que acontece nesta passagem da oralidade para a escrita? Haverá forma de contornar as perdas evidentes? Como ponto de partida para este projecto de legendagem, escolhemos dois filmes ainda não legendados em português, cujos argumentos, coincidentemente, também ainda não se encontravam traduzidos em português. Os filmes escolhidos foram Pull My Daisy e The Last Clean Shirt, documentos visuais da cultura da Beat Generation, movimento sediado nos Estados Unidos da América. A partir da tradução, adaptação e legendagem destas obras, procurámos, então, analisar as dificuldades levantadas pela tradução e introdução das marcas de oralidade existentes nos textos de partida, bem como as suas possibilidades de adaptação, tendo em conta as características do público-alvo e os constrangimentos impostos pela própria natureza deste modo de tradução. Procurou tomar-se em consideração também os problemas relacionados com a transferência da cultura da língua de partida para a língua de chegada. A legendagem destas duas curtas-metragens foi realizada através do programa de software SPOT. Depois de concluído, foi analisado todo o processo de tradução, adaptação e legendagem, considerando a necessidade de contextualizar os filmes a nível literário, artístico e cultural, bem como as decisões relativamente a alguns aspectos do resultado final da legendagem, nomeadamente no que respeita às dificuldades impostas pela transposição da oralidade para a escrita. O argumento de Pull My Daisy, nas palavras do autor Jack Kerouac, baseia-se no Acto III da peça “The Beat Generation”. Esta peça foi escrita em 1957, mas foi recentemente redescoberta em 2005, em forma manuscrita, num armazém de New Jersey. Na sua essência, este argumento consiste num improviso de Kerouac elaborado em voz off durante o filme realizado por Robert Frank e Alfred Leslie, em 1959. Desde então, ambos os realizadores desenvolveram as suas criações artísticas, tendo, por exemplo, Alfred Leslie estreado o seu trabalho mais recente, o vídeo The Cedar Bar no London Film Festival em 2002 e Robert Frank realizado vídeos para canções dos New Order, Run de 1989, e de Patti Smith, em 1996, para Summer Cannibals. A curta-metragem começa com um canção cuja letra é um excerto do poema Pull My Daisy de Allen Ginsberg e Jack Kerouac. Depois, Jack Kerouac representa e encarna com a sua própria voz cada uma das personagens do filme, enquadrando, descrevendo e comentando a acção. O argumento do filme é, assim, um exercício livre de improviso sobre as imagens montadas pelos realizadores. The Last Clean Shirt é um filme experimental de Alfred Leslie, realizado em 1964, cujas legendas originais incluídas no filme são textos do poeta americano Frank O’Hara. Este filme tem sempre o mesmo enquadramento de câmara, ao passo que a “acção” nos é sugerida pelo conteúdo das legendas que integram a obra. Isto é, se por um lado o cenário e os protagonistas do filme são os mesmos do início ao fim do filme, é o texto de O’Hara, associado ao momento da inserção dos segmentos no filme, que atrai ou distrai a atenção do espectador para uma viagem que pode ter vários destinos. Estas duas curtas-metragens constituem textos-limite que põem em evidência os desafios do processo de legendagem, graças às suas características muito especiais, enquanto obras de arte cinematográfica. Para além das dificuldades emergentes que todos os trabalhos de tradução envolvem, neste trabalho considerou-se essencial tentar tratar da melhor forma a estrutura poética livre e conferir significado suficiente e coeso no texto de chegada ao fluxo de pensamento exteriorizado no texto de partida, procurando, especialmente, não prejudicar a característica poética dos textos.

Hand, Foot, and Mouth Syndrome in an Immunocompetent Adult: a Case Report

BACKGROUND: Hand, foot, and mouth syndrome (HFMS) is a common acute illness. It is characterized by mild clinical symptoms including fever, blisters, and sores in the mouth and on the palms and soles following a 3- to 7-day incubation period. This syndrome is rarely seen in adults. CASE PRESENTATION: A 35-year-old male Caucasian patient had a history of multiple episodes of acute pharyngitis, hypertension, hypercholesterolemia, and occasional abdominal pain. He presented with polyarthralgia in the knees and hands and odynophagia, followed by fever, oral mucosal aphthous lesions, and vesicles on the palms and soles. Three weeks after presentation, he was admitted to the emergency room with acute myocarditis. The in-hospital evaluation revealed positive serology for coxsackie A9 (1:160), positive anti-transglutaminase and anti-gliadin antibodies, normal immunoglobulins, and human immunodeficiency virus negativity. CONCLUSION: We herein describe a case of HFMS that was associated with coxsackie A9 infection complicated by acute myocarditis. Although an association between celiac disease and HFMS has not been described, this patient's immunologic disruption could have favored the development of infection and ultimately HFMS.

The impact of banks dimension on profitability, sustainability and efficiency: An analysis for the Iberian financial system

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Potential of CPV receivers integrating screen-printed solar cells

Dissertação para obtenção do Grau de Mestre em Energias Renováveis – Conversão Eléctrica e Utilização Sustentável

Smart macroporous structures for the purification of viral particles

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Training-related accidents during teacher-student-assistance activities of medical students

A survey was done to determine the most common hospital accidents with biologically contaminated material among students at the Medical College of the Federal University of Minas Gerais. Six hundred and ninety-four students (between fifth and twelfth semesters of the college course) answered the questionnaire individually. Three-hundred and forty-nine accidents were reported. The accident rate was found to be 33.9% in the third semester of the course, and increased over time, reaching 52.3% in the last semester. Sixty-three percent of the accidents were needlestick or sharp object injuries; 18.3% mucous membrane exposure; 16.6% were on the skin, and 1.7% were simultaneously on the skin and mucous membrane exposure. The contaminating substances were: blood (88.3%), vaginal secretion (1.7%), and others (9.1%). The parts of the body most frequently affected were: hands (67%), eyes (18.9%), mouth (1.7%), and others (6.3%). The procedures being performed when the accidents occurred were: suture (34.1%), applying anesthesia (16.6%), assisting surgery (8.9%), disposing of needles (8.6%), assisting delivery (6.3%), and others (25.9%). Forty-nine percent of those involved reported the accident to the accident control department. Of these 29.2% did not receive adequate medical assistance. Eight percent of those involved used antiretroviral drugs and of these 86% discontinued the treatment on receiving the Elisa method applied to the patient (HIV-negative); 6.4% discontinued the treatment due to its side-effects; and 16% completed the treatment.

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Hole cleaning performance monitoring during the drilling of directional wells

During drilling operation, cuttings are produced downhole and must be removed to avoid issues which can lead to Non Productive Time (NPT). Most of stuck pipe and then Bottom-Hole Assembly (BHA) lost events are hole cleaned related. There are many parameters which help determine hole cleaning conditions, but a proper selection of the key parameters will facilitate monitoring hole cleaning conditions and interventions. The aim of Hole Cleaning Monitoring is to keep track of borehole conditions including hole cleaning efficiency and wellbore stability issues during drilling operations. Adequate hole cleaning is the one of the main concerns in the underbalanced drilling operations especially for directional and horizontal wells. This dissertation addresses some hole cleaning fundamentals which will act as the basis for recommendation practice during drilling operations. Understand how parameters such as Flowrate, Rotation per Minute (RPM), Rate of Penetration (ROP) and Mud Weight are useful to improve the hole cleaning performance and how Equivalent Circulate Density (ECD), Torque & Drag (T&D) and Cuttings Volumes coming from downhole help to indicate how clean and stable the well is. For case study, hole cleaning performance or cuttings volume removal monitoring, will be based on real-time measurements of the cuttings volume removal from downhole at certain time, taking into account Flowrate, RPM, ROP and Drilling fluid or Mud properties, and then will be plotted and compared to the volume being drilled expected. ECD monitoring will dictate hole stability conditions and T&D and Cuttings Volume coming from downhole monitoring will dictate how clean the well is. T&D Modeling Software provide theoretical calculated T&D trends which will be plotted and compared to the real-time measurements. It will use the measured hookloads to perform a back-calculation of friction factors along the wellbore.

Isolation and encapsulation of a natural colourant using green technologies

The use of natural pigments instead of synthetic colourants is receiving growing interest in the food industry. In this field, cactus pears (Opuntia spp.) have been identified to be a promising betalainic crops covering a wide coloured spectrum. The aim of this work was to develop adequate clean and mild methodologies for the isolation and encapsulation of betacyanins, from cactus pear fruits (Opuntia spp.). Firstly, two different emerging technologies, namely PLE (Pressurized Liquid Extraction) and HPCDAE (High Pressure Carbon Dioxide-Assisted Extraction), were exploited to isolation of betacyanins form cactus pear fruits. Different process conditions were tested for the maximum recovery of betacyanins. Results showed that highest extraction yields were achieved for HPCDAE and mass ratio of pressurized carbon dioxide vs. acidified water was the parameter that most affected the betacyanins extraction. At optimum conditions of HPCDAE, Opuntia spp. extract presented a total betacyanin content of 211 ± 10 mg/100 g whereas extracts obtained using conventional extraction, PLE in static and in dynamic mode presented a total betacyanin content of 85 ± 3, 191 ± 2 and 153 ± 5 mg/100 g, respectively. HPCDAE has proven to be a successful technology to extract betacyanins from Opuntia spp. fruits. Afterward, Supercritical Fluid Technology was exploited to develop lipidic particles of betalain-rich extract. A betacyanin-rich conventional extract was encapsulated by PGSS® (Particles from Gas Saturated Solutions) technique. Different process conditions were tested in order to model the encapsulation of betacyanins. The pressure had a negative effect on betacyanin encapsulation. Lower pressures leads to an increase in the betacyanin encapsulation. This effect was more pronounced at higher temperatures and lower equilibrium time. At these conditions, Opuntia spp. particles presented 64.4 ± 4.5 mg/100 g and high antioxidant capacity. When compared with the Opuntia spp. dried extract, lipidic particles contributed to a better homogenization of the pink colour after incorporation in ice cream.

Res Publica: Citizenship and Political Representation in Portugal, 1820-1926

The term res publica (literally “thing of the people”) was coined by the Romans to translate the Greek word politeia, which, as we know, referred to a political community organised in accordance with certain principles, amongst which the notion of the “good life” (as against exclusively private interests) was paramount. This ideal also came to be known as political virtue. To achieve it, it was necessary to combine the best of each “constitutional” type and avoid their worst aspects (tyranny, oligarchy and ochlocracy). Hence, the term acquired from the Greeks a sense of being a “mixed” and “balanced” system. Anyone that was entitled to citizenship could participate in the governance of the “public thing”. This implied the institutionalization of open debate and confrontation between interested parties as a way of achieving the consensus necessary to ensure that man the political animal, who fought with words and reason, prevailed over his “natural” counterpart. These premises lie at the heart of the project which is now being presented under the title of Res Publica: Citizenship and Political Representation in Portugal, 1820-1926. The fact that it is integrated into the centenary commemorations of the establishment of the Republic in Portugal is significant, as it was the idea of revolution – with its promise of rupture and change – that inspired it. However, it has also sought to explore events that could be considered the precursor of democratization in the history of Portugal, namely the vintista, setembrista and patuleia revolutions. It is true that the republican regime was opposed to the monarchic. However, although the thesis that monarchy would inevitably lead to tyranny had held sway for centuries, it had also been long believed that the monarchic system could be as “politically virtuous” as a republic (in the strict sense of the word) provided that power was not concentrated in the hands of a single individual. Moreover, various historical experiments had shown that republics could also degenerate into Caesarism and different kinds of despotism. Thus, when absolutism began to be overturned in continental Europe in the name of the natural rights of man and the new social pact theories, initiating the difficult process of (written) constitutionalization, the monarchic principle began to be qualified as a “monarchy hedged by republican institutions”, a situation in which not even the king was exempt from isonomy. This context justifies the time frame chosen here, as it captures the various changes and continuities that run through it. Having rejected the imperative mandate and the reinstatement of the model of corporative representation (which did not mean that, in new contexts, this might not be revived, or that the second chamber established by the Constitutional Charter of 1826 might not be given another lease of life), a new power base was convened: national sovereignty, a precept that would be shared by the monarchic constitutions of 1822 and 1838, and by the republican one of 1911. This followed the French example (manifested in the monarchic constitution of 1791 and in the Spanish constitution of 1812), as not even republicans entertained a tradition of republicanism based upon popular sovereignty. This enables us to better understand the rejection of direct democracy and universal suffrage, and also the long incapacitation (concerning voting and standing for office) of the vast body of “passive” citizens, justified by “enlightened”, property- and gender-based criteria. Although the republicans had promised in the propaganda phase to alter this situation, they ultimately failed to do so. Indeed, throughout the whole period under analysis, the realisation of the potential of national sovereignty was mediated above all by the individual citizen through his choice of representatives. However, this representation was indirect and took place at national level, in the hope that action would be motivated not by particular local interests but by the common good, as dictated by reason. This was considered the only way for the law to be virtuous, a requirement that was also manifested in the separation and balance of powers. As sovereignty was postulated as single and indivisible, so would be the nation that gave it soul and the State that embodied it. Although these characteristics were common to foreign paradigms of reference, in Portugal, the constitutionalization process also sought to nationalise the idea of Empire. Indeed, this had been the overriding purpose of the 1822 Constitution, and it persisted, even after the loss of Brazil, until decolonization. Then, the dream of a single nation stretching from the Minho to Timor finally came to an end.