970 resultados para 7.5 percent Sodium chloride
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Química - IQ
Resumo:
Our objective was to determine the best additive to use for the ensiling of sugarcane SP81-3250 based on the nutritional properties and aerobic stability of the silages. The additives evaluated were (1) and (2): salt (NaCl) at rates of 1.0 or 2.0 kg/100 kg fresh sugarcane (as-is basis), respectively; (3) and (4): quicklime (CaO) at rates of 1.0 or 2.0 kg/100 kg fresh sugarcane, respectively; (5) and (6): commercial inoculants Silobac (R) and Maize All (R); and a control treatment. The addition of quicklime reduced the NDF and ADF contents of the silages by 11% compared with the control treatment, but did not increase the digestibility. On the other hand, after 24 h of in vitro fermentation, the application of 1.0 and 2.0% salt reduced the gas production by 34.15 and 33.55 mL/g OM, respectively, and the IVOMD was reduced 5.74 and 5.90%, respectively, compared with the untreated silage. Moreover, the addition of quicklime elevated the pH of the sugarcane silages, with a trend towards an increase in the DM recovery. In contrast, the bacterial inoculants did not alter the pH values, but there was an upward trend for a DM recovery. After the silos were opened, the silages that were treated with salt (independent of the dose) and 1.0% quicklime exhibited greater stability. We recommend applying 1.0 kg of quicklime to each 100 kg of sugarcane at the time of ensiling to improve the nutritional characteristics of sugarcane silage variety SP81-3250.
Resumo:
This paper aimed to study the treatability of rainwater collected in Rio Claro, SP, using natural coagulant tannin based. The tannin was compared with other too primary coagulants, namely ferric chloride and corn starch. Assays were performed in laboratory scale using equipment known as Jarteste and aimed to study the conditions most suitable dosage and coagulation pH. First tests were conducted to compare the coagulating and determination of the conditions to be used in the following tests, taking as a criterion the greatest efficiency for water treatment. Also performed were performed tests to construct the tannin coagulation diagram, using the optimal concentration found in the previous phase, by varying the dosage of coagulant and the pH of clotting in order to determine the isoefficiency regions for apparent color and turbidity. Finally, tests were performed cyclically filtration with filter paper. Preliminary tests indicated that the vegetable tannin concentration 3% (m/m) from the commercial solution was presented the best set of results (84.3% removal of apparent color and 82.51% removal of turbidity) compared to ferric chloride (66.25% removal efficiency and apparent color of turbidity 67.82%) and starch (73.68% removal efficiency apparent color and turbidity to 67.19%). The coagulation diagrams indicate that the best region to work with vegetable tannin 3% is where the coagulant dosage ranges from 15 mg/L to about 37.5 mg/L and coagulation pH ranging from about 6.5 to 7.5. The cyclic filtration showed to be not efficient for the best dosage of coagulant, due to the process of clogging of the filter paper, but proved to be efficient for other dosages. Thus, for the waters studied, the results indicate that the natural coagulant based tannin is an alternative to conventional coagulants, possessing benefits of technical and environmental
Resumo:
The growing interest in the use of groundwater resources is directly related to the economic advantages that the groundwater exploitation offers when compared to surface waters. This happens especially in large urban centers, such as the city of Americana / SP, where the rivers are increasingly contaminated by household and industrial waste. Therefore, this study aimed to characterize the Tubarão Aquifer System, in the city of Americana, to identify and evaluate the spatial distribution of different hydrogeochemical facies as well as understand the rock-fluid interaction through the construction of a conceptual hydrogeochemical model. This study was made based on the recognition of the possible chemical reactions that print the chemical characteristics of groundwater in the area. To do the job, there were two water sampling campaigns of all deep wells used by the City of Americana public water supply. From the results of hydrochemical, classification of water was made by Piper and Stiff diagrams as well as geostatistical data using cluster analysis of principal components. Based on information from the profiles obtained from the survey SIAGAS as well as in geological profiles provided by the city of Americana, we sought to detail the subsurface geology of the Subgroup Itararé in the city of Americana. The results obtained allowed the identification of three hydrochemical types in the study area: Bicarbonated calcium-sodium (1), bicarbonate sodium (2) and sodium chloride (3). The waters have bicarbonate alkaline pH to alkaline and can be considered weakly saline, with electrical conductivity values of around 161 mS / cm. Samples classified as sodium bicarbonate average of 174.99 mS / cm. The pH values ranging from 6.74 to 7.99, averaging 7.52. For the group of waters classified as sodium chloride, conductivity average is 164.32 mS / cm and pH values ranging... (Complete abstract click electronic access below)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fish bioassays are valuable tools that can be used to elucidate the toxicological potential of numerous substances that are present in the aquatic environment. In this study, we assessed the antagonistic action of selenium (Se) against the toxicity of mercury (Hg) in fish (Oreochromis niloticus). Six experimental groups with six fish each were defined as follows: (1) control, (2) mercury (HgCl2), (3) sodium selenite (Na2Se4O3), (4) sodium selenate (Na2Se6O4), (5) mercury + sodium selenite (HgCl2 + Na2Se4O3), and (6) mercury + sodium selenate (HgCl2 + Na2Se6O4). Hematological parameters [red blood cells (RBC), white blood cells (WBC), and erythroblasts (ERB)] in combination with cytogenotoxicity biomarkers [nuclear abnormalities (NAs) and micronuclei (MN)] were examined after three, seven, ten, and fourteen days. After 7 days of exposure, cytogenotoxic effects and increased erythroblasts caused by mercury, leukocytosis triggered by mercury + sodium selenite, leukopenia associated with sodium selenate, and anemia triggered by mercury + sodium selenate were observed. Positive correlations that were independent of time were observed between WBC and RBC, ERB and MN, and NA and MN. The results suggest that short-term exposure to chemical contaminants elicited changes in blood parameters and produced cytogenotoxic effects. Moreover, NAs are the primary manifestations of MN formation and should be included in a class characterized as NA only. Lastly, the staining techniques used can be applied to both hematological characterization and the measurement of cytogenotoxicity biomarkers.
Resumo:
The aim of this study was to adapt the methodology of the accelerated aging and electrical conductivity tests for determination of physiological potential in crambe seeds. Six seed lots of crambe (cv. FMS Brilhante) were subjected to determination of moisture content, germination test, first count germination, emergence, and emergence speed index. For the accelerated aging test, the traditional methodology was used with water, and with a saturated potassium chloride and sodium chloride solution in three periods of exposure (24, 48, and 72 hours) at 41 degrees C; the electrical conductivity test was performed with four pre-soaking treatments (0, 2, 4, and 8 hours) and four soaking periods (4, 8, 16, and 24 hours) at 25 degrees C. The accelerated aging test with water for 72 hours and the electrical conductivity test with 2 hours of pre-soaking and assessment after 16 hours were effective for classification of the crambe seed lots in regard to physiological quality.
Resumo:
The aims of this study were to evaluate the isoflurane sparing and clinical effects of a constant rate infusion of morphine - lidocaine - ketamine (MLK) in healthy sheep undergoing experimental gastrointestinal surgery. Twelve adult female sheep (Texel breed) were used, weighing 36.5 +/- 8.1 kg. The sheep were anesthetized for the implantation of duodenal cannulas. The sheep were premedicated with 0.3 mg kg(-1) intramuscular (IM) morphine and 20 mu g kg(-1) intravenous (IV) detomidine. After premedication, anesthesia was induced using 5 mg kg(-1) ketamine and 0.5 mg kg(-1) diazepam IV and maintained using isoflurane in 100% oxygen. After the induction of anesthesia, the animals were allocated into two groups (each n=6); the GMLK (MLK group - 10 mg morphine, 150 mg lidocaine, 30 mg de ketamine were added in 500 mL saline) received a 10 mL kg(-1)h(-1) MLK infusion during the maintenance of anesthesia, and GCON (control group) received 10 mL kg(-1)h(-1) of 0.9% sodium chloride. The animals were mechanically ventilated. Cardiopulmonary variables and end-tidal isoflurane concentration (FE'Iso) were measured at baseline (immediately before the surgery) and 15, 30 and 45 minutes after initiation of surgery. In GMLK, there was a decrease in the FE 'Iso at 15, 30 and 45 minutes, a reduction of up to 75.6% during the surgery. The HR was lower in GMLK compared with GCON at 30 minutes, and the MAP was at during baseline in GCON compared with GMLK. The standing time was less in GMLK than in GCON. The use of intravenous MLK was demonstrated to offer great efficiency as part of a balanced anesthesia protocol in sheep, with a 75.6% reduction in the need for isoflurane, providing stability of the cardiovascular parameters and blood gases with a shortened recovery period.
Resumo:
The electrochemical behaviour of Cu, Cu-Al and Cu-Al-Ag alloys in aqueous solutions of NaCl (0.5 M, pH = 3.00) was studied by means of voltammetric methods and electrochemical impedance spectroscopy. The surfaces were examined by SEM and EDX analysis. Cu-Al-Ag alloy shows a potentiodynamic behaviour similar to that of the pure copper electrode while the Cu-Al alloy presents some minor differences. In the active dissolution region the electrodes suffer pitting corrosion and in the other potential regions there are the formation of a passivant film with composition depending on the potential. The impedance responses of the electrodes are discussed. An electrodissolution mechanism is proposed and the effect of the alloying elements upon the impedance response and polarisation curves is explained. The main effects are due to the production of copper and silver chlorides and aluminium oxides/ hydroxides at the corroding interface. The addition of Al or (Al + Ag) increases the corrosion resistance of pure copper. © 1995.
Resumo:
Rats bearing lesions in the septal area followed by lesions in the subfornical organ were submitted to various thirst-eliciting procedures. The rats with hyperdipsia induced by lesions of the septal area drank more water than either during the control period or after lesion of the subfornical organ under the same thirst-eliciting or angiotensin-liberating stimuli (polyethyleneglycol, isoproterenol, water deprivation and ligation of the inferior vena cava). The overdrinking elicited by lesions in the septal area was blocked after lesion of the subfornical organ. Neither hypovolemia, nor hypotension or water deprivation could elicit increased water intake in animals whose subfornical organ had been destroyed. Animals with lesions in the subfornical organ showed decreased water intake after cellular dehydration. The results obtained suggest that the subfornical organ acts as a more important structure than the septal area in the regulation of water intake elicited by angiotensin, with two opposite effects: a direct one facilitating water intake, and an indirect one inhibiting the septal area. The septal area has an inhibitory effect on the subfornical organ and on water intake. © 1980.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This in vitro study compared the effect of bleaching agents modified by the addition of calcium and/or fluoride and the application of a nano-hydroxyapatite paste after bleaching, on the susceptibility of enamel to erosion. Bovine enamel cylindrical samples (3 mm diameter) were assigned to six groups (n = 20 specimens/group) according to the bleaching agent: no bleaching (C-control), 7.5% hydrogen peroxide gel (HP), HP with 0.5% calcium gluconate (HP+Ca), HP with 0.2% sodium fluoride (HP+F), HP with calcium and fluoride (HP+Ca+F) and HP followed by the application of a nano-hydroxyapatite agent (HP+NanoP). The gels were applied on the enamel surface (1 h) followed by cyclic erosive challenges (Sprite Zero®-2 min), for 14 days. The paste was applied after bleaching for 5 min (HP+NanoP). The enamel surface alteration was measured by contact profilometry (µm) (after 7 and 14 days). C-control (mean ± SD: 2.29 ± 0.37 at 7 days/4.86 ± 0.72 at 14 days) showed significantly lower loss compared to the experimental groups. HP+Ca (3.34 ± 0.37/6.75 ± 1.09) and HP+F (4.49 ± 0.92/7.61 ± 0.90) presented significantly lower enamel loss than HP (4.18 ± 0.50/10.30 ± 1.58) only for 14 days and HP+Ca+F (4.92 ± 1.03/8.12 ± 1.52) showed values similar to the HP+F group. The HP+NanoP (5.51 ± 1.04/9.61 ± 1.21) resulted in enamel loss similar to the HP after 14 days. It was found that 7.5% hydrogen peroxide increased the susceptibility of enamel to erosion. The addition of calcium or fluoride to the bleaching gel reduced the erosion effect, while the nano-hydroxyapatite agent did not provide any protective effect.
Resumo:
1. 1. A polarographic method for the measurement of the available oxygen in the muscle of living carp by the use of a platinum microelectrode is proposed. 2. 2. The oxygen and the reference electrodes were assembled in a single insertion piece which was implanted in the muscle of a living carp maintained in a special experimental chamber. 3. 3. Curves for normal oxygen levels corresponding to air-saturated water, as well as to a carbogene-saturated water, were obtained. 4. 4. The method can be considered adequate for the measurement of tissue oxygen in living fishes. © 1984.
Resumo:
Sodium cyclamate contents in the widely consumed low calorie soft drinks were determined. Low calorie soft drinks made from cola, guarana, orange, lemon and grape were analyzed following the technique described by Sjörberg and Alanko (1987), with some modifications. The methodology recovery assays were carried out at three spiked levels, and the average recovery of 92.5% and 110.3% were found in cola and guarana, respectively; and the relative standard deviation was of 3.7%. The average sodium cyclamate contents ranged from 27.1 ± 1.1 (cola A) to 127.3 ± 1.5 mg.100 mL-1 (lemon B), indicating that the acceptable daily intake of the sweetener can be easily exceeded after drinking low calorie beverages. All of the analyzed low calorie soft drinks showed sodium cyclamate contents higher than those stated on the label, ranging from 12.9% (cola A) to 19.0% (lemon B). Among 18 low calorie soft drinks analyzed, only four showed the average sodium cyclamate contents in accordance with the maximum limit permitted by Brazilian legislation, that is 40 mg.100 mL-1 of beverage; and in other samples the sweetener exceeded ranging from 74.8% (orange) to 218.3% (lemon B) above of the limit permitted.