Longitudinal evaluations of student satisfaction with a postgraduate unit using importance-performance analysis

The Australian tourism tertiary education sector operates in a competitive and dynamic environment, which necessitates a market orientation to be successful. Academic staff and management in the sector must regularly assess the perceptions of prospective and current students and monitor the satisfaction levels of current students. This study is concerned with the setting and monitoring of satisfaction levels of current students, reporting the results of three longitudinal investigations of student satisfaction in a postgraduate unit. The study also addresses a limitation of a university’s generic teaching evaluation instrument. Importance-Performance Analysis (IPA) has been recommended as a simple but effective tool for overcoming the deficiencies of many student evaluation studies, which have generally measured only attribute performance at the end of a semester. IPA was used to compare student expectations of the unit at the beginning of a semester with their perceptions of performance 10 weeks later. The first stage documented key benchmarks for which amendments to the unit based on student feedback could be evaluated during subsequent teaching periods.

Conceptual models of satisfaction level in construction

It is recognized that, in general, the performance of construction projects does not meet optimal expectations. One aspect of this is the performance of each participant, which is interdependent and makes a significance impact on overall project outcomes. Of these, the client is traditionally the owner of the project, the architect or engineer is engaged as the lead designer and a contractor is selected to construct the facilities. Generally, the performance of the participants is gauged by considering three main factors, namely time, cost and quality. As the level of satisfaction is a subjective measurement, it is rarely used in the performance evaluation of construction work. Recently, various approaches to the measurement of satisfaction have been made in attempting to determine the performance of construction project outcomes – for instance client satisfaction, consultant satisfaction, contractor satisfaction, customer satisfaction and home buyer satisfaction. These not only identify the performance of the construction project, but are also used to improve and maintain relationships. In addition, these assessments are necessary for continuous improvement and enhanced cooperation between participants. The measurement of satisfaction levels primarily involves expectations and perceptions. An expectation can be regarded as a comparison standard of different needs, motives and beliefs, while a perception is a subjective interpretation that is influenced by moods, experiences and values. This suggests that the disparity between perceptions and expectations may be used to represent different levels of satisfaction. However, this concept is rather new and in need of further investigation. This paper examines the current methods commonly practiced in measuring satisfaction level and the advantages of promoting these methods. The results provided are a preliminary review of the advantages of satisfaction measurement in the construction industry and recommendations are made concerning the most appropriate methods for use in identifying the performance of project outcomes.

The impact of contractor’s characteristics in gauging level satisfaction

The outcomes of the construction projects can be evaluated in numerous ways. One method is to measure the satisfaction of participants as represented by the differences between their expectations and perceptions. This measurement is used widely in construction as it promises benefits, such as the improvement of product delivery, and enhances services quality by identifying some necessary changes. Commonly satisfaction measurement is gauged by evaluating the level of client satisfaction of construction performance. The measurement of customer satisfaction on the other hand, is based on the quality of the end product. This evaluation is used to encourage contractors to improve their performance to a required level and to ensure that the projects are delivered as expected- in terms of time, budget and quality. Several studies of performance measurement have indicated that contractor performance is still not satisfactory, as the outcome delivered is not as required (because of cost overruns, time overruns or because it is generally unsatisfactory). This drawback may be due to the contractors’ lack of expertise, motivation and/or satisfaction. The measurement of performance based on contractor satisfaction levels is still new and very few studies have yet taken place in the construction industry. This paper examines how the characteristics of a contracting organisation – namely its experience in the industry, background, past performance, size of organisation and financial stability- may influence its satisfaction levels with regards to project performance. Previous literature reviews and interviews are used as research tools in the preliminary investigation. The outcome is expected to present a basic understanding of contractor satisfaction measurement and its potential for improving the performance of project outcomes.

The identification of Malaysian contractor satisfaction dimensions : a strategy for continuous improvement

The unique characteristics of the construction industry - such as the fragmentation of its processes, varied scope of works and diversity of its participants - are contributory factors to poor project performance. Several issues are unresolved due to the lack of a comprehensive technique to measure project outcomes including: inefficient decision making, insufficient communication, uncertain site conditions, a continuously changing environment, inharmonious working relationships, mismatched objectives within the project team and a blame culture. One approach to overcoming these problems appears to be to measure performance by gauging contractor satisfaction (Co-S) levels, but this has not been widely investigated as yet. Additionally, the key Co-S dimensions at the project level are still not fully identified. ----- ----- This paper concerns a study of satisfaction dimensions, primarily by a postal questionnaire survey of construction contractors registered by the Malaysian Construction Industry Development Board (CIDB). Eight satisfaction dimensions are identified that are significantly and substantially relate to these contractors - comprising: project cost performance, schedule performance, product performance, design satisfaction, site safety, project profitability, business performance and relationships between participants. -Each of these dimensions is accorded different priority levels of satisfaction by different contractors. ----- ----- The output of this study will be useful in raising the awareness and understanding of project teams regarding contractors’ needs, mutual objectives and open communication to help to deliver a successful project.

Consumer satisfaction and redress with a government third-party complaints agency

As governments around the world adopt a marketing orientation, the importance of consumer satisfaction to the effectiveness of the organization is being recognized. While some investigation of satisfaction with a government agencies' service has occurred, there is little examination of satisfaction with a government agency that acts as a third-party on the behalf of consumers to gain marketplace redress. Given the number of third-party complaints is increasing as a result of internet access to complaint channels, this research is a timely investigation. This study reports the findings of a survey of 454 complainants to an Australian Government agency: the Office of Fair Trading (OFT). The findings show that satisfaction with the service was subjectively experienced, based around individual expectations of the redress and satisfaction levels were higher when the redress sought was financial compared with non-financial forms of redress such as apology.

Towards more complete satisfaction of customers in construction

In an environment where economic, political and technological change is the rule, a fundamental business strategy should be the defence of traditional markets and thoughtful entry into new markets, with an aim to increase market penetration and stimulate profit. The success of such a strategy will depend on the success of firms to do more and better for customers than their competitors. In other words, the firm’s primary competitive advantage will come from changes they implement to please their customers. In the construction industry, complexity of technical knowledge and construction processes have traditionally encouraged clients to play a largely passive role in the management of their project. However, today’s clients not only want to know about internal efficiency of their projects but also need to know how they and their contractors compare and compete against their competitors. Given the vulnerability of construction activities in the face of regional financial crisis, constructors need to be proactive in the search to improve their internal firm and project processes to ensure profitability and market responsiveness. In this context, reengineering is a radical design that emphasises customer satisfaction rather than cost reduction This paper discusses the crucial role of the client-project interface and how project networks could facilitate and improve information dissemination and sharing, collaborative efforts, decision-making and improved project climate. An intra-project network model is presented, and project managers’ roles and competencies in forming and coordinating project workgroups is discussed.

The mediating effects of the time structure on the relationships between time management behaviour, job satisfaction and psychological wellbeing

This article examined the relationship between time structure and Macan's process model of time management. This study proposed that time structure—‘appraisal of effective time usage’—would be a more parsimonious mediator than perceived control over time in the relationship between time management behaviours and outcome variables, such as job satisfaction and psychological well-being. Alternative structure models were compared using a sample of 111 university students. Model 1 tested Macan's process model of time management with perceived control over time as the mediator. Model 2 replaced perceived control over time by the construct of time structure. Model 3 examined the possibility of perceived control over time and time structure as being parallel mediators of the relationships between time management and outcomes. Results of this study showed that Model 1 and Model 2 fitted the data equally well. On the other hand, the mediated effects were small and partial in both models. This pattern of results calls for reassessment of the process model.

The requirement to 'Start a Proceeding' to prevent the lapse of a caveat

Section 126 of the Land Title Act 1994 (Qld) regulates whether, and if so, when a caveat will lapse. While certain caveats will not lapse due to the operation of s 126(1), if a caveator does not wish a caveat to which the section applies to lapse, the caveator must start a proceeding in a court of competent jurisdiction to establish the interest claimed under the caveat within the time limits specified in, and otherwise comply with the obligations imposed by, s 126(4). The requirement, in s 126(4), to “start a proceeding” was the subject of judicial examination by the Court of Appeal (McMurdo P, Holmes JA and MacKenzie J) in Cousins Securities Pty Ltd v CEC Group Ltd [2007] QCA 192.

‘I can’t get no satisfaction’...or can I? A study of satisfaction with financial planning and client wellbeing

This paper reports findings from an ongoing collaborative research project with the Financial Services Council (FSC), which contributed funding and facilitated the survey of financial planners’ clients through FSC member organisations. The article draws on the report to the FSC that was prepared by the QUT researchers, reporting findings on the initial exploratory stage of the project.1 The lyric in the title of this paper has become a catchcry for consumers dissatisfied with a range of financial services and products, and, as recent Federal Government inquiries have revealed, there is some truth to the claim. But as financial planning undergoes a series of reforms, including increased professionalism (FPA 2009) and improved quality of advice (Australian Government 2011), there are good reasons to explore the conditions under which clients report satisfaction with their financial planners; not least because the provision of effective financial planning and advice, delivered in accordance with, or transcending, the rules and norms of industry best-practice has the potential to benefit clients, not just financially, but across a number of life domains. In this paper, we report findings from an exploratory study investigating whether financial planning and advice contribute to client well-being, beyond effects on financial well-being. While anecdotal evidence supports psychological benefits such as a sense of security, little research has explored these links in any systematic or theoretically driven way. However, theory and research from cognate disciplines, such as psychology, indicate clear links between planning, goal setting and well-being that are likely to arise in the financial planning domain. Surveyed clients were asked to indicate their satisfaction with their financial advisers, the planning process and the advice they received. Clients responded to items designed to reflect key areas for financial planners in the shift towards increased professionalism, improved disclosure and greater client focus (e.g. FPA 2009). Clients also reflected on their financial situations before and after seeing their advisers, and considered the impact of their financial situations on a number of life areas including family relationships, mental health and well-being, and overall life satisfaction.

Job satisfaction, stress and burnout associated with haemodialysis nursing : a review of literature

Job dissatisfaction, stress and burnout are linked to high rates of nurses leaving the profession, poor morale and poor patient outcomes. Haemodialysis (HD) nursing is uniquely characterised by the intense-prolonged interaction with patients who require complex technological care. A review of nine papers found that factors affecting job satisfaction were aspects of nursing care, organisational factors and length of time that a nurse has been working in nephrology nursing. Factors affecting job stress and burnout were due to interpersonal relationships with physicians, patient care activities, violence and abuse from patients, organisational factors and a lack of access to ongoing education.

Factors contributing to nurse job satisfaction in the acute hospital setting : a review of recent literature

Aim  To explore and discuss from recent literature the common factors contributing to nurse job satisfaction in the acute hospital setting. Background  Nursing dissatisfaction is linked to high rates of nurses leaving the profession, poor morale, poor patient outcomes and increased financial expenditure. Understanding factors that contribute to job satisfaction could increase nurse retention. Evaluation  A literature search from January 2004 to March 2009 was conducted using the keywords nursing, (dis)satisfaction, job (dis)satisfaction to identify factors contributing to satisfaction for nurses working in acute hospital settings. Key issues  This review identified 44 factors in three clusters (intra-, inter- and extra-personal). Job satisfaction for nurses in acute hospitals can be influenced by a combination of any or all of these factors. Important factors included coping strategies, autonomy, co-worker interaction, direct patient care, organizational policies, resource adequacy and educational opportunities. Conclusions  Research suggests that job satisfaction is a complex and multifactorial phenomenon. Collaboration between individual nurses, their managers and others is crucial to increase nursing satisfaction with their job. Implications for nursing management  Recognition and regular reviewing by nurse managers of factors that contribute to job satisfaction for nurses working in acute care areas is pivotal to the retention of valued staff.

Automatic generation of effective video summaries

As the popularity of video as an information medium rises, the amount of video content that we produce and archive keeps growing. This creates a demand for shorter representations of videos in order to assist the task of video retrieval. The traditional solution is to let humans watch these videos and write textual summaries based on what they saw. This summarisation process, however, is time-consuming. Moreover, a lot of useful audio-visual information contained in the original video can be lost. Video summarisation aims to turn a full-length video into a more concise version that preserves as much information as possible. The problem of video summarisation is to minimise the trade-off between how concise and how representative a summary is. There are also usability concerns that need to be addressed in a video summarisation scheme. To solve these problems, this research aims to create an automatic video summarisation framework that combines and improves on existing video summarisation techniques, with the focus on practicality and user satisfaction. We also investigate the need for different summarisation strategies in different kinds of videos, for example news, sports, or TV series. Finally, we develop a video summarisation system based on the framework, which is validated by subjective and objective evaluation. The evaluation results shows that the proposed framework is effective for creating video skims, producing high user satisfaction rate and having reasonably low computing requirement. We also demonstrate that the techniques presented in this research can be used for visualising video summaries in the form web pages showing various useful information, both from the video itself and from external sources.

Is there a physicality requirement at Common Law? : a survey of the Pre-NRDC cases discussing ‘Manufacture’

One of the fundamental issues that remains unresolved in patent law today, both in Australia and in other jurisdictions, is whether an invention must produce a physical effect or cause a physical transformation of matter to be patentable, or whether it is sufficient that an invention involves a specific practical application of an idea or principle to achieve a useful result. In short, the question is whether Australian patent law contains a physicality requirement. Despite being recently considered by the Federal Court, this is arguably an issue that has yet to be satisfactorily resolved in Australia. In its 2006 decision in Grant v Commissioner of Patents, the Full Court of the Federal Court of Australia found that the patentable subject matter standard is rooted in the physical, when it held that an invention must involve a physical effect or transformation to be patent eligible. That decision, however, has been the subject of scrutiny in the academic literature. This article seeks to add to the existing literature written in response to the Grant decision by examining in detail the key common law cases decided prior to the High Court’s watershed decision in National Research Development Corporation v Commissioner of Patents, which is the undisputed authoritative statement of principle in regards to the patentable subject matter standard in Australia. This article, in conjunction with others written by the author, questions the Federal Court’s assertion in Grant that the physicality requirement it established is consistent with existing law.