Erratum: Influence of oxygen plasma treatment parameters on poly(vinylidene fluoride) electrospun fiber mats wettability

Electrospun poly(vinylidene fluoride) (PVDF) fiber mats find applications in an increasing number of areas, such as battery separators, filtration and detection membranes, due to their excellent properties. However, there are limitations due to the hydrophobic nature and low surface energy of PVDF. In this work, oxygen plasma treatment has been applied in order to modify the surface wettability of PVDF fiber mats and superhydrophilic PVDF electrospun membranes have been obtained. Further, plasma treatment does not significantly influences fiber average size (~400 ± 200 nm), morphology, electroactive -phase content (~80-85%) or the degree of crystallinity (Xc of 42 ± 2%), allowing to maintain the excellent physical-chemical characteristics of PVDF. Plasma treatment mainly induces surface chemistry modifications, such as the introduction of oxygen and release of fluorine atoms that significantly changes polymer membrane wettability by a reduction of the contact angle of the polymer fibers and an overall decrease of the surface tension of the membranes.

Inkjet printing technology for flexible pressure sensors

Tese de Doutoramento Ciência e Engenharia de Polímeros e Compósitos.

Fast screening and confirmation of doping agents by UHPLC-QTOF-MS/MS

Introduction: The general strategy to perform anti-doping analysis starts with a screening followed by a confirmatory step when a sample is suspected to be positive. The screening step should be fast, generic and able to highlight any sample that may contain a prohibited substance by avoiding false negative and reducing false positive results. The confirmatory step is a dedicated procedure comprising a selective sample preparation and detection mode. Aim: The purpose of the study is to develop rapid screening and selective confirmatory strategies to detect and identify 103 doping agents in urine. Methods: For the screening, urine samples were simply diluted by a factor 2 with ultra-pure water and directly injected ("dilute and shoot") in the ultrahigh- pressure liquid chromatography (UHPLC). The UHPLC separation was performed in two gradients (ESI positive and negative) from 5/95 to 95/5% of MeCN/Water containing 0.1% formic acid. The gradient analysis time is 9 min including 3 min reequilibration. Analytes detection was performed in full scan mode on a quadrupole time-of-flight (QTOF) mass spectrometer by acquiring the exact mass of the protonated (ESI positive) or deprotonated (ESI negative) molecular ion. For the confirmatory analysis, urine samples were extracted on SPE 96-well plate with mixed-mode cation (MCX) for basic and neutral compounds or anion exchange (MAX) sorbents for acidic molecules. The analytes were eluted in 3 min (including 1.5 min reequilibration) with a S1-25 Ann Toxicol Anal. 2009; 21(S1) Abstracts gradient from 5/95 to 95/5% of MeCN/Water containing 0.1% formic acid. Analytes confirmation was performed in MS and MS/MS mode on a QTOF mass spectrometer. Results: In the screening and confirmatory analysis, basic and neutral analytes were analysed in the positive ESI mode, whereas acidic compounds were analysed in the negative mode. The analyte identification was based on retention time (tR) and exact mass measurement. "Dilute and shoot" was used as a generic sample treatment in the screening procedure, but matrix effect (e.g., ion suppression) cannot be avoided. However, the sensitivity was sufficient for all analytes to reach the minimal required performance limit (MRPL) required by the World Anti Doping Agency (WADA). To avoid time-consuming confirmatory analysis of false positive samples, a pre-confirmatory step was added. It consists of the sample re-injection, the acquisition of MS/MS spectra and the comparison to reference material. For the confirmatory analysis, urine samples were extracted by SPE allowing a pre-concentration of the analyte. A fast chromatographic separation was developed as a single analyte has to be confirmed. A dedicated QTOF-MS and MS/MS acquisition was performed to acquire within the same run a parallel scanning of two functions. Low collision energy was applied in the first channel to obtain the protonated molecular ion (QTOF-MS), while dedicated collision energy was set in the second channel to obtain fragmented ions (QTOF-MS/MS). Enough identification points were obtained to compare the spectra with reference material and negative urine sample. Finally, the entire process was validated and matrix effects quantified. Conclusion: Thanks to the coupling of UHPLC with the QTOF mass spectrometer, high tR repeatability, sensitivity, mass accuracy and mass resolution over a broad mass range were obtained. The method was sensitive, robust and reliable enough to detect and identify doping agents in urine. Keywords: screening, confirmatory analysis, UHPLC, QTOF, doping agents

Iowa Weatherization Assistance Program Fact Sheet, 2006

The Weatherization Assistance Program is a low-income energy efficiency program administered by the Department of Energy (DOE). Its purpose is to make the homes of low-income clients more energy efficient, thereby reducing the households’ energy bills. The program also improves the health and safety of low-income homes. The energy efficiency and health and safety work is done using the most advanced technologies and testing protocols available in the housing industry. States administer the program in accordance with DOE rules and regulations.

Association of moderate alcohol use and binge drinking during pregnancy with neonatal health.

Background:  Heavy drinking and smoking during pregnancy are known to have a negative impact on the unborn child. However, the impact of low-to-moderate alcohol consumption and binge drinking has been debated recently. The aim of this study was to examine the relationship of moderate prenatal drinking and binge drinking with birthweight, being small for gestational age (SGA) at birth, preterm birth, and neonatal asphyxia. Methods:  Moderate alcohol drinking, binge drinking, and several possible confounders were assessed in 1,258 pregnant women; information on neonatal health was obtained at birth. Results:  Results indicate that 30.8% of the women drank at low levels (<2 glasses/wk), 7.9% drank moderately (2 to 4 glasses/wk), and 0.9% showed higher levels of drinking (≥5 glasses/wk); 4.7% reported binge drinking (defined as ≥3 glasses/occasion). 6.4% of the children were SGA (<10th percentile of birthweight adjusted for gestational age), 4.6% were preterm (<37th week of gestation), and 13.0% showed asphyxia (arterial cord pH <7.10 and/or arterial cord lactate >6.35 mmol and/or Apgar score <7 at 5 minutes). When controlling for maternal age, citizenship, occupational status, parity, smoking, use of prescription/over-the-counter drugs, illicit drug use, and child gender moderate drinking was related to lower birthweight (p < 0.01), and moderate drinking and binge drinking were associated with neonatal asphyxia at trend level (p = 0.06 and p = 0.09). Moderate drinking and binge drinking were not related to length of gestation. Conclusions:  In contrast to recent reviews in the field, our results assume that moderate drinking and binge drinking are risk factors for neonatal health.

Controlling the spin of metal atoms adsorbed on oxide surfaces: Ni on regular and defective sites of the MgO(001) surface

We have analyzed the relative energy of nonmagnetic and magnetic low-lying electronic states of Ni atoms adsorbed on regular and defective sites of the MgO(001) surface. To this end cluster and periodic surface models are used within density functional theory. For Ni atoms adsorbed on oxygen vacancies at low coverage, the interaction energy between the metal and the support is much larger than on regular sites. Strong bonding results in a diamagnetic adsorbed species and the energy required to reach the high-spin state increases. Moreover, a correlation appears between the low-spin to high-spin energy difference and the interaction energy hypothesizing that it is possible to prepare the surface to tune the high-spin to low-spin energy difference. Magnetic properties of adsorbed thin films obtained upon increasing coverage are more difficult to interpret. This is because the metallic bond is readily formed and dominates over the effect of the atoms directly bound to the vacancy.

Sellun jälkilajittelun kehittäminen

Työn tavoitteena oli löytää painelajittimen roottorin keskeiset muuttujat ja ajoparametrit, kun pyritään jälkilajittelemaan valkaistua sellumassaa korkeassa sakeudessa, sekä näiden vaikutukset. Tavoitteena oli teknisesti onnistunut lajittelu korkeassa sakeudessa siten, että laitteen puhdistustehokkuus on hyvä, ominaisenergian kulutus on pieni ja kapasiteetti on korkea. Ensin tarkasteltiin kuitenkin teoreettisesti valkaistun sellumassan painelajittelun ongelmakenttää, keskeisten epäpuhtauksien poistoa jälkilajittelussa ja vertailtiin korkea- ja matalasakeuslajittelua. Lisäksi esiteltiin yleisellä tasolla koesuunnittelumenetelmien periaatteita ja menetelmiä sekä analyysiä so. mallinnus. Tätä taustaa vasten haluttiin myös kartoittaa ja esitellä painelajittimen keskeinen muuttujakenttä. Tämän jälkeen selvitettiin kokeellisesti miten ajettavan valkaistun mäntysellumassan sakeus, roottorin kehänopeus ja roottorin rakenteen muutokset vaikuttavat painelajittimen kapasiteettiin, rejektin sakeutumiskertoimeen, ominaisenergian kulutukseen ja puhdistustehokkuuteen. Vaikutusten ja parhaan roottorirakenteen sekä ajosuureiden määritys suoritettiin mallintamalla mittaustulokset lineaarisella regressioanalyysilla. Saatiin tärkeimmät vasteisiin vaikuttavat riippumattomat muuttujat ja niiden matemaattiset esityk-set, malliyhtälöt. Mallinnusta hyväksi käyttäen tarkasteltiin vielä erikseen yhden roottorin ajoa. Tärkeimpinä tuloksina saatiin selville, että puhdistustehokkuus on lähes vakio tietyllä roottorirakenteella riippumatta sakeudesta ja roottorin kehänopeudesta. Edullista puhdistustehokkuuden kannalta on käyttää ensisijaisesti isoa roottorin palaelementin korkeutta ja välystä suhteessa sihtirumpuun. Jälkilajittelu painelajittimella korkeassa sakeudessa kannattaa suorittaa pienellä roottorin kehänopeudella, runko- ja palaelementtivälyksellä suhteessa sihtirumpuun sekä suurella palaelementin korkeudella. Tällöin saavutetaan hyvä kompromissi ominaisenergian kulutuksen ja laitteen ajettavuuden osalta. Iso elementin korkeus ja pieni elementtivälys eivät aja massaa tehokkaasti laitteen alaosaan. Tällöin ei pyöritetä myöskään suurta massamäärää. Pieni elementtivälys mahdollistaa myös massan tehokkaamman leikkauksen, joka parantaa fluidisoitumista. Kitkavoimat ovat luonnollisesti ko. olosuhteissa suuremmat, joten ominais-energian kulutus kasvaa jonkin verran. Ratkaisevinta ominaisenergian kulutuksen kannalta on kuitenkin ajaa laitetta pienellä kehänopeudella.

Anisotropic surface properties of micro/nanostructured a-C:H:F thin films with self-assembly applications

The singular properties of hydrogenated amorphous carbon (a-C:H) thin filmsdeposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, make it suitable as protective coating with low surface energy for self-assembly applications. In this paper, we designed fluorine-containing a-C:H (a-C:H:F) nanostructured surfaces and we characterized them for self-assembly applications. Sub-micron patterns were generated on silicon through laser lithography while contact angle measurements, nanotribometer, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the surface. a-C:H:F properties on lithographied surfaces such as hydrophobicity and friction were improved with the proper relative quantity of CH4 and CHF3 during deposition, resulting in ultrahydrophobic samples and low friction coefficients. Furthermore, these properties were enhanced along the direction of the lithographypatterns (in-plane anisotropy). Finally, self-assembly properties were tested with silicananoparticles, which were successfully assembled in linear arrays following the generated patterns. Among the main applications, these surfaces could be suitable as particle filter selector and cell colony substrate.

Parametric sensitivity analysis for the helium dimers on a model potential

Potential parameters sensitivity analysis for helium unlike molecules, HeNe, HeAr, HeKr and HeXe is the subject of this work. Number of bound states these rare gas dimers can support, for different angular momentum, will be presented and discussed. The variable phase method, together with the Levinson's theorem, is used to explore the quantum scattering process at very low collision energy using the Tang and Toennies potential. These diatomic dimers can support a bound state even for relative angular momentum equal to five, as in HeXe. Vibrational excited states, with zero angular momentum, are also possible for HeKr and HeXe. Results from sensitive analysis will give acceptable order of magnitude on potentials parameters.

Spatial multicriteria decision analysis for the siting of on-shore wind power in Kemiönsaari

Wind power is a low-carbon energy production form that reduces the dependence of society on fossil fuels. Finland has adopted wind energy production into its climate change mitigation policy, and that has lead to changes in legislation, guidelines, regional wind power areas allocation and establishing a feed-in tariff. Wind power production has indeed boosted in Finland after two decades of relatively slow growth, for instance from 2010 to 2011 wind energy production increased with 64 %, but there is still a long way to the national goal of 6 TWh by 2020. This thesis introduces a GIS-based decision-support methodology for the preliminary identification of suitable areas for wind energy production including estimation of their level of risk. The goal of this study was to define the least risky places for wind energy development within Kemiönsaari municipality in Southwest Finland. Spatial multicriteria decision analysis (SMCDA) has been used for searching suitable wind power areas along with many other location-allocation problems. SMCDA scrutinizes complex ill-structured decision problems in GIS environment using constraints and evaluation criteria, which are aggregated using weighted linear combination (WLC). Weights for the evaluation criteria were acquired using analytic hierarchy process (AHP) with nine expert interviews. Subsequently, feasible alternatives were ranked in order to provide a recommendation and finally, a sensitivity analysis was conducted for the determination of recommendation robustness. The first study aim was to scrutinize the suitability and necessity of existing data for this SMCDA study. Most of the available data sets were of sufficient resolution and quality. Input data necessity was evaluated qualitatively for each data set based on e.g. constraint coverage and attribute weights. Attribute quality was estimated mainly qualitatively by attribute comprehensiveness, operationality, measurability, completeness, decomposability, minimality and redundancy. The most significant quality issue was redundancy as interdependencies are not tolerated by WLC and AHP does not include measures to detect them. The third aim was to define the least risky areas for wind power development within the study area. The two highest ranking areas were Nordanå-Lövböle and Påvalsby followed by Helgeboda, Degerdal, Pungböle, Björkboda, and Östanå-Labböle. The fourth aim was to assess the recommendation reliability, and the top-ranking two areas proved robust whereas the other ones were more sensitive.

Ison tuuligeneraattorin roottorin ja staattorin rakennetarkastelu

Maailmanlaajuinen ilmastopolitiikka asettaa vaativia tavoitteita hiilidioksidipäästöjen vähentämiselle. Suurin haaste on tuottaa energiaa mahdollisimman alhaisin kustannuksin käyttäen uusiutuvia ja ympäristöä säästäviä energiamuotoja. Tuulivoimasta on tullut nopeimmin kehittyvä sähköntuotantotapa, ja tuuliturbiinien koon kasvun myötä on myös generaattorien koko kasvanut merkittävästi 1990-luvulta lähtien. Generaattorin massiivisuus suoravetoisessa tuuliturbiinin voimansiirrossa vaatii tarkkoja kuormitustarkasteluja, jotta rakenne kestäisi tuuliturbiinin eliniän. Tuuliturbiinin kuormitukset ovat stokastisia ja toisinaan erittäin suuria, mikä vaikeuttaa kuormitusten määrittämistä. Tuulen kuormitusten lisäksi generaattori altistuu eri toimintojen kautta muillekin kuormituksille, ja tästä syystä on otettava huomioon jarrutuksen, dynaamisen tasapainon ja ohjauksen sekä verkkovikojen aiheuttamat rasitukset tuuliturbiinin voimansiirrolle. Edellisten lisäksi työssä on tarkasteltu erilaisia rakenneratkaisuja sekä pyritty kiinnittämään huomio niiden kuormankantokykyyn ja jäykkyyteen sekä generaattorin keventämismahdollisuuksiin verrattuna perinteisiin radiaalivuogeneraattoreihin. Työssä on pyritty selvittämään rakenteen kuormitukset siten, että pystyttäisiin optimoimaan mahdollisimman kevyt rakenne. Optimoinnin kohteena on pinnarakenteisen generaattorin rakenteen massa puolien, puolan kulmien sekä tukirenkaan ja niistä aiheutuvien erilaisten rakenneyhdistelmien suhteen tarkasteltuna.

The green economy challenge to IPE

Note d'analyse

L’opinion des Canadiens et des Américains au sujet des changements climatiques: un écart important?

Cette note présente des résultats de deux importants sondages menés en parallèle dans les deux pays. Au Canada, nos données sont tirées du plus récent Canadian Survey on Energy and the Environment (CSEE, Lachapelle et al. 2015) et aux États-Unis, nous rapportons les résultats du National Survey on Energy and the Environment (NSEE). Réalisés au mois de septembre 2015, ces deux sondages ont soumis les mêmes questions à des échantillons représentatifs des populations du Canada et des États-Unis.

Fine structure in the time of flight distribution of C2 in laser produced plasma from graphite

Time resolved optical emission spectroscopy is employed to study the expansion dynamics of C2 species in a graphite plasma produced during the Nd : YAG ablation. At low laser fluences a single peak distribution with low kinetic energy is observed. At higher fluences a twin peak distribution is found. It has been noted that these double peak time of flight distribution splits into a triple peak structure at distances >_ 17mm from the target surface. The reason for the occurrence of multiple peak is due to different formation mechanisms of C2 species

Multimode laser emission from dye doped polymer optical fiber

Multimode laser emission is observed in a polymer optical fiber doped with a mixture of Rhodamine 6G (Rh 6G) and Rhodamine B (Rh B) dyes. Tuning of laser emission is achieved by using the mixture of dyes due to the energy transfer occurring from donor molecule (Rh 6G) to acceptor molecule (Rh B). The dye doped poly(methyl methacrylate)-based polymer optical fiber is pumped axially at one end of the fiber using a 532 nm pulsed laser beam from a Nd:YAG laser and the fluorescence emission is collected from the other end. At low pump energy levels, fluorescence emission is observed. When the energy is increased beyond a threshold value, laser emission occurs with a multimode structure. The optical feedback for the gain medium is provided by the cylindrical surface of the optical fiber, which acts as a cavity. This fact is confirmed by the mode spacing dependence on the diameter of the fiber.