Offshore Wind Farms: Foundations and influence on the Littoral Processes

Offshore wind farms are beginning to form part of coastal and marine landscapes located in dynamic surroundings. An integral management model must therefore be applied to achieve not only technical and economic viability of the project but also respect for the environment. Amongst other aspects, the latter calls for an analysis of the possible impact these facilities may have on littoral processes and this requires the differences between littoral processes prior and subsequent to the facility’s construction to be known. The maritime climate, the composition of the coast, lay-out distribution and characteristics of the facility’s components need to be known, particularly foundations as they are the main obstacles waves and currents meet. This article first addresses different aspects related to an offshore wind farm’s influence on the analysis of how it affects littoral dynamics and, because of their importance in this study, pays special attention to foundations. Coastal erosion due to this type of facility is then examined. The main conclusion of this article is that, whilst there are certain opinions claiming the coast is not affected by the presence of this kind of facility since the distance from location to coast and between wind turbine generators themselves is long, the impact must be analysed in each specific case, at least until experience proves otherwise and criteria are adopted in this respect.

Sistema de protección contra incendios de un parque de almacenamiento de líquidos petrolíferos

Los procesos relacionados con el almacenamiento y manipulación de productos petrolíferos, conllevan siempre determinados riesgos de incendio que dependen básicamente de las propiedades físicas y químicas de los productos, y hacen indispensable la adopción de importantes medidas de seguridad contra incendios. Esto es debido a que las consecuencias previsibles en caso de la producción y expansión del incendio son tan graves que aconsejan la instalación de medios más potentes de lucha contra incendios, que los simples extintores manuales. En base a ello, el presente proyecto pretende definir y desarrollar una propuesta de diseño del sistema de protección contra incendios en la zona de almacenamiento de una planta de almacenamiento de líquidos petrolíferos. La planta almacena Gasóleo, Gasolina y Queroseno de Aviación en ocho tanques atmosféricos de techo fijo situados en un único cubeto de retención. Se desarrolla un extenso estudio de los requisitos normativos para este tipo de casos, y en consecuencia, se calcula y clasifica el nivel de riesgo intrínseco de incendio en la zona estudiada, a partir de su carga de fuego ponderada y corregida. Además, se muestra la distribución de los tanques en el cubeto, basada en el cálculo de las distancias de seguridad entre cada uno de ellos y con el exterior. A partir de ello, el proyecto se centra en el cálculo de los valores de descarga de agua de refrigeración, requeridos en las boquillas de agua pulverizada e hidrantes exteriores de alrededor de la zona de riesgo; de espuma física para hidrocarburos, en las cámaras de espuma de la parte superior de la envolvente de los tanques, y en los monitores auxiliares de descarga de espuma, de la zona del cubeto de retención. Los objetivos, métodos y bases de cálculo se recogen en la memoria del proyecto. Además se incluye, la planificación temporal con MS Project, de la implementación del proyecto; la elección de los equipos que componen los sistemas, el presupuesto asociado y los planos de distribución de la planta y del flujo de tuberías propuesto. ABSTRACT Fire protection units and equipment are necessary on processes and operations related to storage and handling of petroleum products, because of their flammable and combustible properties. In case a hazard of fire from petroleum products is materialized, huge consequences are to be expected. To reduce losses, facilities should be equipped with appropriate protection. Based on that, this project seeks to define and develop the fire protection system design for a petroleum liquids storage installation. The plant stores Gasoil, Gasoline, and aviation Kerosene in eight fixed roof atmospheric tanks. A complete study of the fire protection regulations is carried out and, as a result, the studied area’s risk level is determined from its fire load density. The calculation of the minimum shell-to-shell spacing of adjacent aboveground storage tanks and external equipment, is also determined for a correct distribution of tanks in the bunded area. Assuming that, the design includes calculations of required discharge of water for spray nozzles and hydrants, and required discharge of foam from foam chambers and foam monitors. Objectives, methodology and calculation basis are presented on the project technical report; which also includes project scheduling with MS. Project software, the selection of system components and equipment, related budget and lay out of installation and piping.

Sistemas radiolarios: geometrías y arquitecturas derivadas

Uno de los temas más importantes dentro del debate contemporáneo, es el que se refiere a la sostenibilidad a largo plazo de la sociedad tal y como la entendemos hoy. El ser humano está recuperando la sensibilidad perdida que le concebía como una pieza más dentro del ciclo natural de la vida. Por fin hemos entendido que no podemos ser auto suficientes e independientes del entorno natural que nos rodea. Más allá del respeto y del cuidado, está abierta la puerta del conocimiento infinito que nos brinda la naturaleza a todos los niveles y a todas las escalas. Dentro de la disciplina arquitectónica han existido ejemplos como Antoni Gaudí o Frei Otto que han referenciado su obra en el mundo Natural, encontrando en él las estrategias y bases para el diseño arquitectónico. Sin embargo han sido una minoría dentro del enorme elenco de arquitectos defensores del ángulo recto. En las últimas décadas, la tendencia está cambiando. No nos referimos tanto a la sensibilidad creciente por conseguir una mayor eficiencia energética que ha llevado a una puesta en valor de la arquitectura vernácula, trasladando su sabiduría a las estrategias bioclimáticas. Nos referimos a un caso específico dentro del amplio abanico de formas arquitectónicas que han aparecido gracias a la incorporación de las herramientas computacionales en el diseño y la producción. Las arquitecturas que nos interesan son las que aprovechan estas técnicas para analizar e interpretar las estrategias complejas y altamente eficientes que encontramos en la naturaleza, y trasladarlas a la disciplina arquitectónica. Esta tendencia que se enmarca dentro de la Biomímesis o Biomimética es conocida con el nombre de Bioarquitectura. La presente tesis trata de morfología y sobre todo de morfogénesis. El término morfología se refiere al estudio de una forma concreta que nos permite entender un caso específico, nuestro foco de atención se centra sin embargo en la morfogénesis, es decir, en el estudio de los procesos de generación de esas formas, para poder reproducir patrones y generar abanicos de casos adaptables y reconfigurables. El hecho de estudiar la forma no quiere decir que ésta sea una tesis “formalista” con la connotación peyorativa y gestual que se le suele atribuir a este término. La investigación concibe el concepto de forma como lo hace el mundo natural: forma como síntesis de eficiencia. No hay ninguna forma natural gratuita, que no cumpla una función determinada y que no se desarrolle con el mínimo material y gaste la mínima energía posible. Este afán por encontrar la “forma eficaz” es lo que nos hace traspasar la frontera de la arquitectura formalista. El camino de investigación morfológica se traza, como el título de la tesis indica, siguiendo el hilo conductor concreto de los radiolarios. Estos microorganismos unicelulares poseen unos esqueletos tan complejos que para poder entender su morfología es necesario establecer un amplio recorrido que abarca más de 4.000 años de conocimiento humano. Desde el descubrimiento de los sólidos platónicos, poliedros que configuran muchas de las formas globales de estos esqueletos; hasta la aplicación de los algoritmos generativos, que permiten entender y reproducir los patrones de comportamiento que existen detrás de los sistemas de compactación y teselación irregular de los esqueletos radiolarios. La tesis no pretende plantear el problema desde un punto de vista biológico, ni paleontológico, aunque inevitablemente en el primer capítulo se realiza un análisis referenciado del estado del conocimiento científico actual. Sí se analizan en mayor profundidad cuestiones morfológicas y se tratan los diferentes posicionamientos desde los cuales estos microorganismos han servido de referencia en la disciplina arquitectónica. Además encontramos necesario analizar otros patrones naturales que comparten estrategias generativas con los esqueletos radiolarios. Como ya hemos apuntado, en el segundo capítulo se aborda un recorrido desde las geometrías más básicas a las más complejas, que tienen relación con las estrategias de generación de las formas detectadas en los microorganismos. A su vez, el análisis de estas geometrías se intercala con ejemplos de aplicaciones dentro de la arquitectura, el diseño y el arte. Finalizando con un cronograma que sintetiza y relaciona las tres vías de investigación abordadas: natural, geométrica y arquitectónica. Tras los dos capítulos centrales, el capítulo final recapitula las estrategias analizadas y aplica el conocimiento adquirido en la tesis, mediante la realización de diferentes prototipos que abarcan desde el dibujo analítico tradicional, a la fabricación digital y el diseño paramétrico, pasando por modelos analógicos de escayola, barras metálicas, resina, silicona, látex, etc. ABSTRACT One of the most important issues in the contemporary debate, is the one concerning the long-term sustainability of society as we understand it today. The human being is recovering the lost sensitivity that conceived us as part of the natural cycle of life. We have finally understood that we cannot be self-sufficient and independent of the natural environment which surrounds us. Beyond respect and care, we’ll find that the gateway to the infinite knowledge that nature provides us at all levels and at all scales is open. Within the architectural discipline, there have been remarkable examples such as Antoni Gaudí or Frei Otto who have inspired their work in the natural world. Both, found in nature the strategies and basis of their architectural designs. However, they have been a minority within the huge cast of architects defenders of the right angle. In recent decades, the trend is changing. We are not referring to the growing sensitivity in trying to achieve energy efficiency that has led to an enhancement of vernacular architecture, transferring its wisdom to bioclimatic strategies. We refer to a specific case within the wide range of architectural forms that have appeared thanks to the integration of computer tools in both design and production processes. We are interested in architectures that exploit these techniques to analyse and interpret the complex and highly efficient strategies found in nature, and shift them to the discipline of architecture. This trend, which is being implemented in the framework of the Biomimicry or biomimetics, is called Bioarchitecture. This thesis deals with morphology and more specifically with morphogenesis. Morphology is the study of a concrete form that allows us to understand a specific case. However, our focus is centered in morphogenesis or, in other words, the study of the processes of generation of these forms, in order to replicate patterns and generate a range of adaptable and reconfigurable cases. The fact of studying shapes does not mean that this is a “formalistic” thesis with the pejorative connotation that is often attributed to this term. This study conceives the concept of shape as Nature does: as a synthesis of efficiency. There is no meaningless form in nature. Furthermore, forms and shapes in nature play a particular role and are developed with minimum energetic consumption. This quest to find the efficient shape is what makes us go beyond formalistic architecture. The road of morphological investigation is traced, as the title of the thesis suggests, following the thread of radiolaria. These single-cell microorganisms possess very complex skeletons, so to be able to understand their morphology we must establish a wide spectrum which spans throughout more than 4.000 years of human knowledge. From the discovery of the platonic solids, polyhedrons which configure a huge range of global shapes of these skeletons, through the application of generative algorithms which allow us to understand and recreate the behavioral patterns behind the systems of compression and irregular tessellation of the radiolarian skeletons. The thesis does not pretend to lay out the problem from a biological, paleontological standpoint, although inevitably the first chapter is developed through an analysis in reference to the current state of the science. A deeper analysis of morphological aspects and different positionings is taken into account where these microorganisms have served as reference in the architectonic discipline. In addition we find necessary to analyse other natural patterns which share generative strategies with radiolarian skeletons. Aforementioned, in the second chapter an itinerary of the most basic geometries to the more complex ones is addressed. These are related, in this chapter, to the generative strategies of the shapes found in microorganisms. At the same time, the analysis of these geometries is placed among examples of applications inside the fields of architecture, design and the arts. To come to an end, a time chart synthesizes and relates the three investigation paths addressed: natural, geometrical and architectonic. After the two central chapters, the final chapter summarises the strategies analysed and applies the knowledge acquired throughout the thesis. This final chapter is shaped by the realization of different prototypes which range from traditional analytical drawings, to digital fabrication and parametric design, going through plaster analogical models, metal bars, resin, silicone, latex, etc.

Áreas limpas: estudo de correlação entre partículas viáveis e não viáveis

Este trabalho consiste em um estudo sobre monitoramento ambiental de áreas limpas. Os parâmetros comparados foram partículas não viáveis de 0,5 e 5,0 µm, contaminação do ambiente (UFC do ar) e de superfícies (Rodac®). Procedeu-se ao estudo em áreas de manipulação crítica (Classe A). Nestas áreas, a amostragem foi feita em situações de repouso e dinâmica, antes e após sanitização, e em etapas de certificação e rotina. Os dados de literatura indicam que os parâmetros não são particularmente dependentes do lay out ou classificação das áreas, mas sim do seu uso e do comportamento dos operadores. As conclusões foram positivas quanto a correlação entre diferentes locais de amostragem, para partículas não viáveis de 0,5 e 5,0 µm, e ausência deste tipo de correlação em posições em fluxo laminar. Também, os valores de correlação foram quase sempre decrescentes com a maior limpeza do ambiente. Os microrganismos mais frequentemente isolados, nas áreas A2., A3 e A4 foram Bacillus sp, Staphylococcus sp e Corynebacterium sp.

Integrated Solar City: Application of the Ecological Risk Assessment Paradigm to Inform Reclamation

The Integrated Solar City (ISC) is a large solar project that has been proposed for development in the western state of Gujarat, India. The project will be the largest solar project in the world. It will require the use of large land resources to construct. An ecological risk assessment (ERA) is used to assess potential impacts from project construction and operation. Previous research suggests that a solar project of this scale would require the removal of vegetation along with other negative effects on vegetation and soil. The ERA was used to lay out a revegetation plan that would help mitigate the long-term environmental impacts in the Banaskantha and Kachchh regions of Gujarat, India.

Resolution of the committee concerning the way through Rogers's farm, 1762 February 27

One octavo-sized leaf containing a one-page handwritten draft of a resolution by a Harvard Corporation Committee appointed to "lay out an High Way thro' Rogers's Farm & determine about the Cost of the Sd way & the making the fences to enclose it." The resolution permits the town of Waltham to lay a highway on the farm's property as long as it is enclosed by a stone wall.

Copy of Gov[erno]r Philips's additional instructions about settling some Palatine families in Nova Scotia: Copy Col. Dunbar's additional instruction about settling some Irish families in Nova Scotia : manuscript, [1730]

Copies of two documents, approved 20 Apr. 1730; instructions to Richard Philips state that a number of Protestant Irish and Palatine families have been granted land in Nova Scotia, to be surveyed by David Dunbar; and instructions to Dunbar to survey and lay out land for the families.

Meeting Competition: Why it is not an Abuse under Article 82. Research Papers in Law, 3/2004.

Introduction. Meeting competition occurs when an undertaking lowers its prices in response to the entry of a competitor. Despite accepting that meeting competition can be compatible with Article 82, the Commission2 and the Court of justice3 have repeatedly condemned the practice due to the modalities of implementation or “particular circumstances”.4 However, existing precedent on the subject remains obscurely reasoned and contradictory, such that it is at the present time impossible to give clear advice to undertakings on the circumstances in which meeting competition is compatible with Article 82. Not only is such legal uncertainty in itself damaging but, in so far as it discourages meeting competition, it appears to us to be harmful to competition. As concerns the latter point, it will be seen that some of the most powerful arguments against prohibiting meeting competition are based on the counterproductive nature of the remedies. The present article does not, however, aim to propose a simple solution to distinguish abusive and non-abusive meeting competition.5 Nor does the article aim to give a comprehensive overview of the existing case law in this area.6 Instead, it takes a more economic approach and aims to lay out in a (brief but) systematic fashion the competitive concerns that might potentially be raised by the practice of meeting competition and in doing so to try to identify the main flaws in the Court and Commission’s approach.

A new Visegrad Group in the new European Union - possibilities and opportunities for development. OSW Point of View, June 2003

The Visegrad Group has fulfilled the tasks it was set when established. It seems unjustified, therefore, to ponder the need for it to function further. However, it is advisable to lay out new tasks, suitable for the group's operation in the new European reality - following EU accession of Visegrad countries in May 2004.

The New European Commission Presidency and the Advent of European Democracy. Jean Monnet/Robert Schuman Paper Series Vol. 14 No. 17, August 2014

On June 15, 2014, Jean-Claude Juncker, the lead candidate of the European People’s Party, was elected President of the European Commission, with the support of the Alliance of Liberals and Democrats for Europe, and some of the European Socialists and Greens. Amid unprecedented Euroscepticism, the media and many pundits predicted a record-low voter turnout and record-high results for Europhobic parties. The aforementioned parties then decided that the political outcome of these 2014 European elections would also be unprecedented. For the first time in EU history, the European political parties agreed to nominate candidates to chair the institution, which they justified by putting forward Article 17 of the Lisbon Treaty. The European Parliament has often characteristically used political discourse - the logos, to influence the EU’s institutional framework, even though it entails grappling with Member States. It took the form of reports and resolutions, like the official use of the phrase “European Parliament” in 1962, direct universal suffrage elections in 1975 and a European Union in 1984. Nominating contenders to chair the European Commission is no exception. It requires a specific political discourse whose origins can be traced back to the early years of the European Parliament, when it was still the “Common Assembly”. This political discourse is one of the elements thanks to which the European Parliament acquired visibility and new prerogatives, in pursuit of its legitimacy. However, the executive branch in all member states is not intent on yielding such prerogatives to the European Parliament. As a matter of fact, the European Parliament has often ended up strengthening the heads of state and governments, since MEPs are forced to resort to self-discipline. The symbolic significance of its logos and, consequently, its own politicisation as a source of legitimacy, is thus undermined. For instance, in 2014, Jean-Claude Juncker’s election actually strengthened German Chancellor Angela Merkel. First she questioned the fact that the candidate whose party holds the parliamentary majority after the election should be appointed President of the Commission. Then she seemed strongly intent on democratising the Union, when she confronted David Cameron, who openly opposed Juncker, believed to be too federalist and old-fashioned a candidate. By doing so, she eventually reduced the symbolic dimension of the European Parliament’s initiative, and Juncker’s election. She also unquestionably embodied EU leadership. This paper aims at analysing Juncker’s election to the Presidency of the European Commission, as well as other questions it raises. In the first part, I lay out some thoughts about the sociohistorical context of voting in European elections in order to make the readers understand why the European Parliament should be bolder. Secondly, I try to explain how the European Parliament has used the logos as a weapon to grapple with member states for more power, as was the case during the 2014 European elections. Last but not least, I seek to show how Angela Merkel got hold of that weapon and took advantage of it, thus proving that despite MEPs’ best efforts, Juncker’s task will be all the more complicated as he was not the consensual candidate of all the governments.

Marketing Hospitality Web Sites

The web has emerged as a potent business channel. Yet many hospitality websites are irrelevant in a new and cluttered technical world. Knowing how to promote and advertise a website and capitalizing on available resources are the keys to success. The authors lay out a marketing plan for increasing hospitality website traffic.

Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

The development of home refrigerators generally are compact and economic reasons for using simplified configuration. The thermodynamic coefficient of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country of continental size like Brazil with diverse climatic conditions. The COP of the cycle depends crucially on the ability of heat dissipated in the condenser. So in hot climates like the northeast, north, and west-central dispel ability is highly attenuated compared to the south and southeast regions with tropical or subtropical climates when compared with other regions. The dissipation in compact capacitors for applications in domestic refrigeration has been the focus of several studies, that due to its impact on reducing costs and power consumption, and better use of the space occupied by the components of refrigeration systems. This space should be kept to a minimum to allow an increase in the useful storage volume of refrigerator without changing the external dimensions of the product. Due to its low cost manufacturing, wire on tube condensers continue to be the most advantageous option for domestic refrigeration. Traditionally, these heat exchangers are designed to operate under natural convection. Not always, the benefits of greater compactness of capacitors for forced outweigh the burden of pumping air through the external heat exchanger. In this work we propose an improvement in convective condenser changing it to a transfer mechanism combined in series with conductive pipes and wire to a moist convective porous medium and the porous medium to the environment. The porous media used in the coating was composed of a gypsum plaster impregnated fiber about a mesh of natural cellulosic molded tubular wire mesh about the original structure of the condenser , and then dried and calcined to greater adherence and increased porosity. The proposed configuration was installed in domestic refrigeration system ( trough ) and tested under the same conditions of the original configuration . Was also evaluated in the dry condition and humidified drip water under natural and forced with an electro - fan ( fan coil ) convection. Assays were performed for the same 134- refrigerant charge e under the same thermal cooling load. The performance was evaluated in various configurations, showing an improvement of about 72 % compared with the original configuration proposed in humidification and natural convection.

Advanced functionality for radio analysis in the Offline software framework of the Pierre Auger Observatory.

The advent of the Auger Engineering Radio Array (AERA) necessitates the development of a powerful framework for the analysis of radio measurements of cosmic ray air showers. As AERA performs "radio-hybrid" measurements of air shower radio emission in coincidence with the surface particle detectors and fluorescence telescopes of the Pierre Auger Observatory, the radio analysis functionality had to be incorporated in the existing hybrid analysis solutions for fluorescence and surface detector data. This goal has been achieved in a natural way by extending the existing Auger Offline software framework with radio functionality. In this article, we lay out the design, highlights and features of the radio extension implemented in the Auger Offline framework. Its functionality has achieved a high degree of sophistication and offers advanced features such as vectorial reconstruction of the electric field, advanced signal processing algorithms, a transparent and efficient handling of FFTs, a very detailed simulation of detector effects, and the read-in of multiple data formats including data from various radio simulation codes. The source code of this radio functionality can be made available to interested parties on request. (C) 2011 Elsevier B.V. All rights reserved.

Towards structured, block-based PDF

The Portable Document Format (PDF), defined by Adobe Systems Inc. as the basis of its Acrobat product range, is discussed in some detail. Particular emphasis is given to its flexible object-oriented structure, which has yet to be fully exploited. It is currently used to represent not logical structure but simply a series of pages and associated resources. A definition of an Encapsulated PDF (EPDF) is presented, in which EPDF blocks carry with them their own resource requirements, together with geometrical and logical information. A block formatter called Juggler is described which can lay out EPDF blocks from various sources onto new pages. Future revisions of PDF supporting uniquely-named EPDF blocks tagged with semantic information would assist in composite-pagemakeup and could even lead to fully revisable PDF.

A pilot study on the productivity and behavior of the gestating sow housed in a flex stall

Animal welfare is a controversial topic in modern animal agriculture, partly because it generates interest from both the scientific community and the general public. The housing of gestating sows, particularly individual housing, is one of the most critical concerns in farm animal welfare. We hypothesize that the physical size of the standard gestation stall may limit movement and evoke demands and challenges on the sow to affect the physiological and psychological well-being of the individually housed sow. Thus, improvements in the design of the individual gestation stall system that allow more freedom to move, such as increasing stall width or designing a stall that could accommodate the changing size of the pregnant sow, may improve sow welfare. The objective of this pilot study was to evaluate the effects of a width adjustable stall (FLEX) on productivity and behavior of dry sows. The experiment consisted of 3 replications (block 1, n=4 sows; block 2, n=4 sows; block 3, n=8 sows), and multi-parious sows were allotted to either a FLEX stall or standard gestation stall for 1 gestation period. Sow mid-girth (top of the back to bottom of the udder) was measured 5-6 times throughout gestation to determine the best time points for FLEX stall width expansions. FLEX stall width was adjusted according to mid-girth measurements, and expanded to achieve an additional 2 cm of space between the bottom of the sow’s udder and floor of the stall so that sows could lie in full lateral recumbency without touching the sides of the stall. Productivity data recorded included: sow body weight (BW) and BW gain, number of piglets born and born alive, proportions of piglets stillborn, mummified, lost between birth and weaning, and weaned, and litter and mean piglet birth BW, weaning BW, and average BW gain from birth-to-weaning. Lesions were recorded on d 21 and d 111 of gestation. Sub-pilot behavior data were observed and registered for replicate 1 sows using continuous video-records for the l2 hour lights on period (period 1, 0600-1000; period 2, 1000-1400; period 3, 1400-1800) prior FLEX stall adjustment and 12 hour lights on period post adjustment on d 21, 22, 23, 43, 44, 45, 93, 94, 95. A randomized complete block design with a 2 × 2 factorial arrangement for treatments was used to analyze sow productivity and performance traits. Data were analyzed using the Mixed Models procedure of SAS. A preliminary analysis of data means and numerical trends was used to analyze sow behavior measurements. Sows housed in a FLEX stall had more (P < 0.05) total born and a tendency for more piglets born alive (P = 0.06) than sows housed in a standard stall. Sow body weight also tended to be higher (P = 0.06) for sows housed in a FLEX stall compared to sows housed in a standard stall. There were numerical trends for mean durations of sit, lay, lay (OUT), and eat behaviors to be greater for sows housed in a FLEX stall compared with sows housed in a standard stall. The mean duration of lay (IN) behavior tended to be numerically less for sows housed in a FLEX stall compared with sows housed in a standard stall. There were numerical trends for the mean durations of stand and drink behaviors to be greater for sows housed in a standard stall compared with sows housed in a FLEX stall. The mean frequencies of postural changes and mean durations of oral-nasal-facial and sham-chew behaviors were numerically similar between types of gestation stall. Mean durations and numerical trends indicate that time of day influenced all of the behaviors assessed in this study. The results of this pilot study indicate that the adjustable FLEX stall may affect sow productivity and behavior differently than the standard gestation stall, and thus potentially improve sow well-being. Future research should continue to compare the new FLEX stall design to current housing systems in use and examine physiological traits and immune status in addition to behavioral and productivity traits to assess the effects that this housing system has on the overall welfare of the gestating sow.