Desenvolvimento de um sistema foto-oxidativo visando aplicação no tratamento de águas produzidas em campos de petróleo

Increasing concern with the environment, in addition to strict laws, has induced the industries to find altenatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo¬Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. it's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Desenvolvimento de um sistema foto-oxidativo visando aplicação no tratamento de águas produzidas em campos de petróleo

Increasing concern with the environment, in addition to strict laws, has induced the industries to find alternatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo- Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. It's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Comparação entre metodologias de extração de HPAs em água utilizando um planejamento fatorial com quantificação no CG/EM

PAHs (Polycyclic Aromatic Hydrocarbons) are a group of organic substances which receive considerable attention because of the carcinogenic and mutagenic properties of some of them. It is therefore important to determine the PAHs in different environmental matrices. Several studies have shown the use of gas chromatography coupled to mass spectrometry as a technique for quantification of PAHs by presenting excellent detection limits. This study aimed to develop an analytical methodology for the determination of 16 PAHs listed by the USEPA, test two methods for extraction of PAHs in water from a 23 factorial design, quantify them through the analytical technique coupled to gas chromatography mass spectrometry (GC/MS) using the method developed, and finally apply the results in chemometrics. The sample was synthesized and subjected to tests of the 23 factorial design, which has the factors: the type of extraction technique (ultrasound and digester), the ratio solvent / sample (1:1 and 1:3) and the type of solvent (dichloromethane / hexane and acetone / dichloromethane). The responses of eight combinations of the factorial design were obtained from the quantification by external calibration in GC/MS. The quantification method was developed from an optimized adaptation of the USEPA Method 8270. We used the full scan mode as a way of acquiring the mass spectra of 16 PAHs. The time in which the samples were subjected to ultrasound was fixed at 10 min and held an investigation to establish the conditions of power and time in the digester. We had the best response in the investigation of the digester power of 100 watts and the time of six minutes. The factorial design of liquid-liquid extraction showed that the most representative factors were: the use of the digester as extraction technique, the ratio solvent / sample 1:1 and the use of a 1:1 mixture of dichloromethane / hexane as a solvent more suitable. These results showed that the 1:1 mixture of dichloromethane / hexane is an excellent mixture to recover the extraction of PAHs an aqueous sample using the microwave digester. The optimization of the method of separation, identification and quantification of PAHs in the GC/MS was valid for 16 PAHs present in each chromatogram of the samples

Estudo dos principais fatores que influenciam na solubilização dos hpas em águas

Polycyclic aromatic hydrocarbons (PAHs) constitute a family of compounds characterized by having two or more condensed aromatic rings and for being a class of substances that are widely distributed in the environment as a complex mixture, being very persistent in the environment due to its low solubility in water. The application of chemometric methods to analytical chemistry has provided excellent results in studying the solubility of PAHs in aqueous media in order to understand the mechanisms involved in environmental contamination. The method consists in analyzing the solubilization of PAHs from diesel oil in water varying parameters such as stirring time, volume of oil added and pH, using a full factorial design of two levels and three factors. PAHs were extracted with n-hexane and analyzed by fluorescence spectroscopy because they have molecular characteristics fluorescent due to the large number of condensed rings and links, and gas chromatography coupled to a mass spectrometer (GC-MS). The results of fluorescence analysis showed that only the stirring time and pH influenced the solubility of PAHs in diesel fuel. How is a non-selective technique for the study of fluorescence was performed on form and semi-quantitative. And for the chromatographic analysis the results showed that the solubility of the different PAHs is influenced differently so that you can classify them into groups by the results of the effects

Degradação eletroquímica de benzeno, tolueno e xileno via oxidação eletroquímica utilizando eletrodo Ti/Pt

This work is directed to the treatment of organic compounds present in produced water from oil using electrochemical technology. The water produced is a residue of the petroleum industry are difficult to treat , since this corresponds to 98 % effluent from the effluent generated in the exploration of oil and contains various compounds such as volatile hydrocarbons (benzene, toluene, ethylbenzene and xylene), polycyclic aromatic hydrocarbons (PAHs), phenols, carboxylic acids and inorganic compounds. There are several types of treatment methodologies that residue being studied, among which are the biological processes, advanced oxidation processes (AOPs), such as electrochemical treatments electrooxidation, electrocoagulation, electrocoagulation and eletroredution. The electrochemical method is a method of little environmental impact because instead of chemical reagents uses electron through reactions of oxide-reducing transforms toxic substances into substances with less environmental impact. Thus, this paper aims to study the electrochemical behavior and elimination of the BTX (benzene, toluene and xylene) using electrode of Ti/Pt. For the experiment an electrochemical batch system consists of a continuous source, anode Ti/Pt was used, applying three densities of current (1 mA/cm2, 2,5 mA/cm2 and 5 mA/cm2). The synthetic wastewater was prepared by a solution of benzene, toluene and xylene with a concentration of 5 ppm, to evaluate the electrochemical behavior by cyclic voltammetry and polarization curves, even before assessing the removal of these compounds in solution by electrochemical oxidation. The behavior of each of the compounds was evaluated by the use of electrochemical techniques indicate that each of the compounds when evaluated by cyclic voltammetry showed partial oxidation behavior via adsorption to the surface of the Ti/Pt electrode. The adsorption of each of the present compounds depends on the solution concentration but there is the strong adsorption of xylene. However, the removal was confirmed by UV-Vis, and analysis of total organic carbon (TOC), which showed a percentage of partial oxidation (19,8 % - 99,1 % TOC removed), confirming the electrochemical behavior already observed in voltammetry and cyclic polarization curves

Desenvolvimento e aplicação de método GC-MS/MS para análise simultânea de 17 HPAs em material particulado atmosférico

Os hidrocarbonetos policíclicos aromáticos (HPAs) estão associados ao aumento da incidência de diversos tipos de cânceres no homem. Essas moléculas são formadas principalmente na queima incompleta de matéria orgânica, sendo encontradas em todos os compartimentos ambientais. Órgãos regulamentadores das áreas ambiental e de saúde ocupacional consideram 17 HPAs como contaminantes atmosféricos prioritários. Este trabalho apresenta um método para análise simultânea destes HPAs utilizando-se a cromatografia a gás acoplada à espectrometria de massas operando no modo tandem (GC-MS/MS). Os limites de detecção e quantificação do método mostraram-se até 5 vezes inferiores aos obtidos no método GC-MS (SCAN). O método mostrou-se seletivo para análise de HPAs em extratos de amostras de material particulado atmosférico. Uma análise comparativa de dois sistemas de solventes (diclorometano/metanol 4:1 v/v e hexano/acetona 1:1 v/v) para a extração de HPAs, utilizando amostras de material particulado atmosférico, revelou que ambas as misturas de solventes possuem poder de extração semelhante. Os resultados sugerem que é possível realizar extração de HPAs de material particulado atmosférico em ultra-som com a mistura hexano/acetona (1:1), que é menos tóxica em relação à mistura diclorometano/metanol (4:1), bastante utilizada nestas análises, sem perdas significativas na exatidão do método.

Avaliação da genotoxicidade e mutagenicidade das águas dos rios Jaguari, Atibaia e Piracicaba, na região de influência da refinaria de Paulínia - SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Carcinogênese quimicamente induzida por DMBA em glândulas salivares submandibulares de ratos (rattus norvegicus)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização e validação de método para a análise de HPAs em rapadura

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência da queima de cana-de-açúcar na presença de HPAs em ambiente residencial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da determinação do 1-Nitropireno em material particulado atmosférico

Pós-graduação em Química - IQ

Avaliação da genotoxicidade e mutagenicidade de misturas comerciais de diesel e biodiesel puras e em simulações de vazamento em água e solo

Pós-graduação em Ciências Biológicas (Biologia Celular e Molecular) - IBRC

Desenvolvimento metodológico e avaliação de contaminação por HPAs em sedimentos da baia de Guajará

Os Hidrocarbonetos Policíclicos Aromáticos (HPAs) são poluentes de efeito tóxico, prejudiciais ao meio ambiente e à saúde humana, fazem parte de um grupo de compostos poluentes orgânicos persistentes (POPs), que por suas características tem impactado o ambiente, sendo por esse motivo bastante estudados. Podem estar presentes nas formas particulada, dissolvida e/ou gasosa, estando presentes em diferentes ambientes; solo, sedimento, ar, água, material particulado na atmosfera, organismos e alimentos (Kennish, 2007). As fontes naturais de HPAs incluem atividades vulcânicas, queimadas naturais, exsudação de óleos, além de processos biogênicos. HPAs antrogênicos podem ocorrer pela combustão incompleta de óleos combustíveis (automotores e industriais), queima intencional de madeira e plantações, efluentes domésticos e/ou industriais, drenagens pluviais urbanas, derrames acidentais de óleos e derivados. Hidrofóbicos e lipofílicos, essas substâncias podem ser facilmente adsorvidas em sedimentos, sendo este compartimento um importante reservatório desses poluentes. Para avaliar a presença desses compostos no ambiente, utilizou-se nesse trabalho a Cromatografia Líquida de Alta Eficiência. As amostras utilizadas no desenvolvimento e otimização da metodologia foram coletadas na baia do Guajará (Belém – PA). O presente trabalho constituiu-se dessa forma em um desenvolvimento de um procedimento metodológico (com adaptações e otimizações) para quantificar 16 HPAs em 10 pontos na baia do Guajará, Belém – PA, em duas etapas de campo, totalizando 20 amostras analisadas. Na etapa de desenvolvimento do método analítico foram testados sistemas de eluição, polaridade do sistema e fluxo do eluente entre outros. Para validação do método foram avaliados os parâmetros fidelidade, linearidade, limite de detecção, limite de quantificação do método. Razões diagnósticas foram calculadas para identificação das fontes primárias do HPAs encontrados na baia. Foram identificadas, a partir de razões diagnósticas da ΣHPAs BMM/ΣHPAsAMM; Fen/Ant; Flt/Pir; Ant/Σ178; Flt/Σ202; B(a)P/Σ228 e Ind(123cd) pireno/Σ276 as fontes primárias dos 16 HPAs estudados no sedimento da baia. A somatória das concentrações dos HPAs leves na primeira etapa de campo, variou de 132,13 ng.g^-1 a 1704,14 ng.g^-1, a ΣHPAs dos pesados de 125,82 g.g^-1 a 1269,71 ng.g^-1 e ΣHPAs totais de 317,84 ng.g^-1 a 3117,06 ng.g^-1.. Na segunda etapa de campo, as concentrações dos HPAs leves variou de 76,12 ng.g^-1 a 1572,80 ng.g^-1 ; a ΣHPAs pesados variou entre 213,90 ng.g^-1 a 1423,03 ng.g^-1, e Σ HPAs totais teve concentrações de 290,02 ng.g^-1 a 2995,82 ng.g^-1. A partir dos resultados obtidos pode-se classificar a baia do Guajará como moderadamente impactada. A combustão constitui a fonte predominante de HPAs nos sedimentos da baia do Guajará, seguida da combustão de biomassa vegetal e aporte de petróleo e derivados. A maioria dos pontos estudados nesse trabalho, nas duas etapas de campo, apresentaram concentrações de HPAs individuais acima dos VGQS.

Influência da queima da palha de cana de açúcar na constituição do material particulado atmosférico (MP2,5 e MP10) e as suas implicações potenciais sobre a saúde humana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de enzimas ligninolíticas, glioxal oxidase e proteases por fungos marinhos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)