A fault detection technique for dynamical systems

This paper shows how a functional observer can be utilized to detect faults in LTI MIMO systems. The fault detection technique is designed so that the functional observer based fault indicator asymptotically converges to a fault indicator that can be derived based on the nominal system. The asymptotic value of the proposed fault indicator is not dependent on the functional observer parameters; moreover, by choosing appropriate functional observer parameters the convergence rate of the fault indicator can be altered. Observability of the system is not a requirement for the design of the fault detection scheme.

ε-bounded state estimation for time-delay systems with bounded disturbances

A new problem on ε-bounded functional state estimation for time-delay systems with unknown bounded disturbances is studied in this paper. In the presence of unknown bounded disturbances, the common assumption regarding the observers matching condition is no longer required. In this regard, instead of achieving asymptotic convergence for the observer error, the error is now required to converge exponentially within a ball with a small radius ε > 0. This means that the estimate converges exponentially within an ε-bound of the true value. A general observer that utilises multiple-delayed output and input information is proposed. Sufficient conditions for the existence of the proposed observer are first given. We then employ an extended Lyapunov-Krasovskii functional which combines the delay-decomposition technique with a triple-integral term to study the ε-convergence problem of the observer error system. Moreover, the obtained results are shown to be more effective than the existing results for the cases with no disturbances and/or no time delay. Three numerical examples are given to illustrate the obtained results.

Low-order estimation scheme for large-scale systems with interconnection delays

This paper deals with the practical aspects of reduced-order distributed functional state observers design for interconnected linear systems subject to time delays in the interconnections. Contrary to some estimation strategies which only take the ideal instantaneous output information into account, the proposed scheme incorporates output information that is inevitably encountered with time delays in the course of its transmission from the distanced subsystems. It is proved that such estimator possesses less restrictive existence conditions with the acceptance of measurement data from other interrelated subsystems. Upon the satisfaction of the established existence conditions, it will be demonstrated through a simple design procedure and simulation results that a feasible observer can be realized for a given numerical system.

Partial state estimation: a new design approach

© 2014 IEEE. There are three different approaches for functional observer design for Linear Time-Invariant (LTI) systems within the literature. One of the most common methods has been proposed by Aldeen [1] and further developed by others. We found several examples in which the necessary and sufficient conditions for the existence of a functional observer are actually not sufficient for this methodology. This finding motivated us to develop a new methodology for designing functional observers. Our new method provides enough degrees of freedom for the observer design parameter and it improves the weakness within the Aldeen's method in solving the observer coupled matrix equations. In this paper, we present the reason and an example to show the insufficiency of the former method. Furthermore, we present our new developed methodology. An illustrative algorithm also describes the design procedure step by step. A numerical example and simulation results support our findings and performance of the proposed method.

Partial state estimation of LTI systems with multiple constant time-delays

Functional observer design for Multi-Input Multi-Output (MIMO) Linear Time-Invariant (LTI) systems with multiple mixed time delays in the states of the system is addressed. Two structures for the design of a minimum-order observer are considered: 1 - delay-dependent, and 2 - internal-delay independent. The parameters of the delay-dependent observer are designed using the Lyapunov Krasovskii approach. The delay-dependent exponential stability of the observer for a specified convergence rate and delay values is guaranteed upon the feasibility of a set of Linear Matrix Inequalities (LMIs) together with a rank condition. Using the descriptor transformation, a modified Jensen's inequality, and improved Park's inequality, the results can be less conservative than the available functional observer design methods that address LTI systems with single state delay. Furthermore, the necessary and sufficient conditions of the asymptotic stability of the internal-delay independent observer are obtained, which are shown to be independent of delay. Two illustrative numerical examples and simulation studies confirm the validity and highlight the performance of the proposed theoretical achievements.

Minimum-order filter design for partial state estimation of linear systems with multiple time-varying state delays and unknown input delays

Designing delay-dependent functional observers for LTI systems with multiple known time-varying state delays and unknown time-varying input delays is studied. The input delays are arbitrary, but the state delays should be upper-bounded. In addition, two scenarios of slow-varying and fast-varying state delays are investigated. The results of the paper can also be considered as one of the first contributions considering unknown-input functional observer design for linear systems with multiple time-varying state delays. Based on the Lyapunov Krasovskii approach, delay-dependent sufficient conditions of the exponential stability of the observer in each scenario are established in terms of linear matrix inequalities. Because of using effective techniques, such as the descriptor transformation and an advanced weighted integral inequality, the proposed stability criteria can result in larger stability regions compared with the other papers that study functional observers for time-varying delay systems. Furthermore, to help with the design procedure, a genetic algorithm-based scheme is proposed to adjust a weighting matrix in the established linear matrix inequalities. Two numerical examples illustrate the design procedure and demonstrate the efficacy of the proposed observer in each scenario.

New results in robust functional state estimation using two sliding mode observers in cascade

 This paper presents a functional observer scheme using two sliding mode observers in cascade. A coordinate transformation is performed on the system such that existing sliding mode observer theory can be directly applied to achieve functional state estimation. The necessary and sufficient existence conditions for the scheme (in terms of the original system matrices) are also investigated, and they are found to be less stringent than earlier work on functional state estimation using one sliding mode observer; this could have benefits in terms of cost and simplicity. A numerical example verifies the effectiveness of the scheme.

Functional state observers design for interconnected time-delay systems

His research contributes to the field of functional state estimation for interconnected time-delay systems. Through progressive improvements and refinements, these developed observer structures have practical application for industry and more widely in the engineering field.

Investigating functional thinking in the elementary classroom : foundations of early algebraic reasoning

This paper examines the development of student functional thinking during a teaching experiment that was conducted in two classrooms with a total of 45 children whose average age was nine years and six months. The teaching comprised four lessons taught by a researcher, with a second researcher and classroom teacher acting as participant observers. These lessons were designed to enable students to build mental representations in order to explore the use of function tables by focusing on the relationship between input and output numbers with the intention of extracting the algebraic nature of the arithmetic involved. All lessons were videotaped. The results indicate that elementary students are not only capable of developing functional thinking but also of communicating their thinking both verbally and symbolically.

A low-order linear functional observer for time delay systems

This paper presents an efficient technique to design low order state function observers for linear time-delay systems. Assuming the existence of a linear state feedback controller to achieve stability or some control performance criteria of the time-delay system, a design procedure is proposed for
reconstruction of the state feedback control action. The procedure involves solving an optimisation problem with the objective to generate a matrix that is as close as possible to the given feedback gain of the required feedback controller. A condition for robust stability of the time-delay system using the observer-based control scheme is given. The attractive features of the proposed design procedure are that the resulted linear functional state observer is of a very low order and it requires information of a small number of outputs. Numerical examples are given to demonstrate the design procedure and its merits.

A functional observer based fault detection technique for dynamical systems

This paper presents a functional observer based fault detection method. The fault detection is achieved using a functional observer based fault indicator that asymptotically converges to a fault indicator that can be derived based on the nominal system. The asymptotic value of the proposed fault indicator is independent of the functional observer parameters and also the convergence rate of the fault indicator can be altered by choosing appropriate functional observer parameters. The advantage of using this new method is that the observed system is not necessarily needed to be observable; therefore, the proposed fault detection technique is also applicable for systems where state observers cannot be designed; moreover, the functional observer fault detection scheme is always of reduced order in comparison to a state observer based scheme.

Functional neuroimaging and behavioural studies on global form processing in the human visual system

Magnetoencephalography (MEG), functional magnetic resonance imaging (fMRI) and behavioural experiments were used to investigate the neural processes underlying global form perception in human vision. Behavioural studies using Glass patterns examined sensitivity for detecting radial, rotational and horizontal structure. Neuroimaging experiments using either Glass patterns or arrays of Gabor patches determined the spatio-temporal neural responseto global form. MEG data were analysed using synthetic aperture magnetometry (SAM) to spatially map event-related cortical oscillatory power changes: the temporal sequencing of activity within a discrete cortical area was determined using a Morlet wavelet transform. A case study was conducted to determine the effects of strbismic amblyopia on global form processing: all other observers were normally-sighted. The main findings from normally-sighted observers were: 1) sensitivity to horizontal structure was less than for radial or rotational structure; 2) the neural response to global structure was a reduction in cortical oscillatory power (10-30 Hz) within a network of extrastriate areas, including V4 and V3a; 3) the extend of reduced cortical power was least for horizontal patters; 4) V1 was not identified as a region of peak activity with either MEG or fMRI. The main findings with the strabismic amblyope were: 1) sensitivity for detection of radial, rotational, and horizontal structure was reduced when viewed with the amblyopic- relative to the fellow- eye; 2) cortical power changes within V4 to the presentation of rotational Glass patterns were less when viewed with the amblyopic- compared with the fellow- eye. The main conclusions are: 1) a network of extrastriate cortical areas are involved in the analysis of global form, with the most prominent change in neural activity being a reduction in oscillatory power within the 10-30 Hz band; 2) in strabismic amblyopia, the neuronal assembly associated with form perception in extrastriate cortex may be dysfunctional, the nature of this dysfunction may be a change in the normal temporal pattern of neuronal discharges; 3) MEG, fMRI and behavioural measures support the notion that different neural processes underlie the perception of horizontal as opposed to radial or rotational structure.

A common functional observer scheme for three systems with unknown inputs

This paper presents a novel common functional observer scheme for three systems with unknown inputs. The scheme uses three observers in cascade with two logic switches. The existence conditions of the scheme are investigated and presented in terms of the original system matrices. Significantly, the conditions allow the observers to be designed independently of each other which greatly simplify the design process, and also serve as a basis of comparison for future development of common functional observer schemes. A numerical example is given to illustrate the effectiveness of the proposed scheme.

Time-Dependent Density Functional Molecular Orbital and Excited State Calculations on Bis(porphyrinyl)butadiynes in the Monocationic, Neutral, Monoanionic, and Dianionic Oxidation States

We report a theoretical study of the multiple oxidation states (1+, 0, 1−, and 2−) of a meso,meso-linked diporphyrin, namely bis[10,15,20-triphenylporphyrinatozinc(II)-5-yl]butadiyne (4), using Time-Dependent Density Functional Theory (TDDFT). The origin of electronic transitions of singlet excited states is discussed in comparison to experimental spectra for the corresponding oxidation states of the close analogue bis{10,15,20-tris[3‘,5‘-di-tert-butylphenyl]porphyrinatozinc(II)-5-yl}butadiyne (3). The latter were measured in previous work under in situ spectroelectrochemical conditions. Excitation energies and orbital compositions of the excited states were obtained for these large delocalized aromatic radicals, which are unique examples of organic mixed-valence systems. The radical cations and anions of butadiyne-bridged diporphyrins such as 3 display characteristic electronic absorption bands in the near-IR region, which have been successfully predicted with use of these computational methods. The radicals are clearly of the “fully delocalized” or Class III type. The key spectral features of the neutral and dianionic states were also reproduced, although due to the large size of these molecules, quantitative agreement of energies with observations is not as good in the blue end of the visible region. The TDDFT calculations are largely in accord with a previous empirical model for the spectra, which was based simplistically on one-electron transitions among the eight key frontier orbitals of the C4 (1,4-butadiyne) linked diporphyrins.