Characterisation of Coal Seam Gas Waters in New Zealand

Coal seam gas (CSG) exploration and development requires the abstraction of significant amounts of water. This is so because gas desorbtion in coal seams takes place only after aquifer pressure has been reduced by prolonged pumping of aquifer water. CSG waters have a specific geochemical signature which is a product of their formation process. These waters have high bicarbonate, high sodium, low calcium, low magnesium, and very low sulphate concentrations. Additionally, chloride concentrations may be high depending on the coal depositional environment. This particular signature is not only useful for exploration purposes, but it also highlights potential environmental issues that can arise as a consequence of CSG water disposal. Since 2002 L&M Coal Seam Gas Ltd and CRL Energy Ltd, have been involved in exploration and development of CSG in New Zealand. Anticipating disposal of CSG waters as a key issue in CSG development, they have been assessing CSG water quality along with exploration work. Coal seam gas water samples from an exploration well in Maramarua closely follow the geochemical signature associated with CSG waters. This has helped to identify CSG potential, while at the same time assessing the chemical characteristics and water generation processes in the aquifer. Neutral pH and high alkalinity suggest that these waters could be easily managed once the sodium and chloride concentrations are reduced to acceptable levels.

Designed tissue engineering scaffolds prepared by stereolithography

For the fabrication of tissue engineering scaffolds, the intended tissue formation process imposes requirements on the architecture. The chosen porosity often is a tradeoff between volume and surface area accessible to cells, and mechanical properties of the construct. Interconnectivity of the pores is essential for cell migration through the scaffold and for mass transport. Conventional techniques such as salt leaching often result in heterogeneous structures and do not allow for a precise control of the architecture. Stereolithography is a rapid prototyping method that can be utilised to make 3D constructs with high spatial control by radical photopolymerisation. In this study, a regular structure based on cyclic repetition of cell units were designed through CAD modelling.. One of these structures was built on a stereolithography apparatus (SLA). Furthermore, a polylactide-based resin was developed that can be applied in stereolithography. Polylactide has proven before to be a well-performing polymer in bone tissue engineering. The final objective in this study is to build newly designed PDLLA scaffolds with a precise SLA fabrication technique to study the effect of scaffold architecture on mechanical and biological properties.

A study of abrasive water jet characteristics by CFD simulation

Computational fluid dynamics (CFD) models for ultrahigh velocity waterjets and abrasive waterjets (AWJs) are established using the Fluent 6 flow solver. Jet dynamic characteristics for the flow downstream from a very fine nozzle are then simulated under steady state, turbulent, two-phase and three-phase flow conditions. Water and particle velocities in a jet are obtained under different input and boundary conditions to provide an insight into the jet characteristics and a fundamental understanding of the kerf formation process in AWJ cutting. For the range of downstream distances considered, the results indicate that a jet is characterised by an initial rapid decay of the axial velocity at the jet centre while the cross-sectional flow evolves towards a top-hat profile downstream.

A tutorial on visual servo control

This article provides a tutorial introduction to visual servo control of robotic manipulators. Since the topic spans many disciplines our goal is limited to providing a basic conceptual framework. We begin by reviewing the prerequisite topics from robotics and computer vision, including a brief review of coordinate transformations, velocity representation, and a description of the geometric aspects of the image formation process. We then present a taxonomy of visual servo control systems. The two major classes of systems, position-based and image-based systems, are then discussed in detail. Since any visual servo system must be capable of tracking image features in a sequence of images, we also include an overview of feature-based and correlation-based methods for tracking. We conclude the tutorial with a number of observations on the current directions of the research field of visual servo control.

Photodissociation of TEMPO-modified peptides: New approaches to radical-directed dissociation of biomolecules

Radical-directed dissociation of gas phase ions is emerging as a powerful and complementary alternative to traditional tandem mass spectrometric techniques for biomolecular structural analysis. Previous studies have identified that coupling of 2-[(2,2,6,6-tetramethylpiperidin-1-oxyl)methyl] benzoic acid (TEMPO-Bz) to the N-terminus of a peptide introduces a labile oxygen-carbon bond that can be selectively activated upon collisional activation to produce a radical ion. Here we demonstrate that structurally-defined peptide radical ions can also be generated upon UV laser photodissociation of the same TEMPO-Bz derivatives in a linear ion-trap mass spectrometer. When subjected to further mass spectrometric analyses, the radical ions formed by a single laser pulse undergo identical dissociations as those formed by collisional activation of the same precursor ion, and can thus be used to derive molecular structure. Mapping the initial radical formation process as a function of photon energy by photodissociation action spectroscopy reveals that photoproduct formation is selective but occurs only in modest yield across the wavelength range (300-220 nm), with the photoproduct yield maximised between 235 and 225 nm. Based on the analysis of a set of model compounds, structural modifications to the TEMPO-Bz derivative are suggested to optimise radical photoproduct yield. Future development of such probes offers the advantage of increased sensitivity and selectivity for radical-directed dissociation. © 2014 the Owner Societies.

New regime for property agents and residential property sales in Queensland : Property Occupations Act 2014

This article examines the new Property Occupations Act 2014 (POA) and relevant provisions of the Agents Financial Administration Act 2014 (AFAA) and the impacts for property practitioners. The Acts are due to commence later in 2014 once regulations and relevant forms are drafted. Coinciding with the commencement of the Acts further versions of the REIQ Houses and Land Contract and REIQ Community Title Contract will also be released. The POA introduces changes for licencing of real estate agents, property developers and resident letting agents as well as significant changes for the contract formation process. The AFAA includes the trust account and claim fund provisions of PAMDA, which avoids duplication of these provisions across each of the industry-specific Bills. The most significant change is to the process for making a claim against the fund for the conduct of property agents.

Käsityksistä ajatuksen poluille : Ammattikorkeakoulun tutkimus- ja kehitystoiminnan kehittäminen

This study deals with the formation of the idea of research and development (r&d) activity at one particular university of applied sciences in Finland. In this study I proceed from examining the conceptions of management regarding r&d-activities to exploring the development of the complex concept that guides these r&d-activities. The aim of this study is, first, to describe conceptions of r&d-activities, and then, second, to describe the formation of a new concept for r&d-activities in one field of study at the university of applied sciences. I used phenomenographic analysis to elucidate the conceptions and collected the data in interviews of personnel (22) who belong to the management of the university of applied sciences. The data for analysing the obstacles faced and the ways of overcoming them during the formation process of the new concept consist of the video-recorded material from ten change laboratory sessions held for the specific field of study at the university of applied sciences. In researching the formation of the concept of the activity, such research and analysis methods are used in which the concept is understood as a material construction, and with the help of which one can work out the formation of the concept during the development process. When the systematic development of the r&d-work was underway, the management of the university of applied sciences held differing views regarding the content, target, factors and organisation of the r&d-activities, as well as regarding the position of dissertations as a part of r&d-activity. Obstacles for developing rd concerned the unclear object and outcomes of the new activity, not having the tools (such as adequate know-how) for the new activity and not having found the necessary solutions for the distribution of work. In addition the rules that quide the activities of the university of applied sciences did not support working according to the new way. To improve r&d-activity, the school’s management defined three development strategies to encourage adequate rd-activity to support working life, regional development and learning. The strategies were based on the expansion of existing methods, such as service activities, dissertation work and the research activities of the teachers. Of the three possible routes, the concept of dissertation in this study was expanded to integrate the services of organisation development and the occupational growth of the students. A group of teachers in the field of social and health studies participated in the development work. The change laboratory method was used as a tool for this work. Analysis of the cognitive trails indicated that, in addition to the cycle of expansive learning activities, microcycles with different purposes can exist. According to Cussins (1992), something already in existence in each microcycle is destabilised, and something else is stabilised to replace it. In this study three microcycles were identified, during which the teachers first destabilised the existing concepts of dissertation work that guided their thinking, and then began to use new concepts to structure their thinking. Secondly, they undermined the existing concepts with material structure that defined their practical work, and developed new practical models to replace them. Thirdly, the problems accumulating in researching and testing the new activities caused the developers to destabilise the r&d-strategies of the university of applied sciences and to define a new conceptual model for r&d-work in the field. During this third cycle, the teachers developed a research arena model, which was a significant expansive innovation. In the cognitive trails developing the new concept for the r&d-activity, the teachers indeed faced the obstacles the management had described as their conceptions. These obstacles manifested themselves as contradictions. During the development process, the nature of the obstacles (i.e. contradictions) changed as the development proceeded. Solving the first and second degree contradictions highlighted the third and fourth degree contradictions. To overcome the obstacles, the teachers had to to articulate the value and motive of the development work throughout the development process. Developing the new concept for r&d-activity required many reconfigurations of practical solutions to overcome the obstacles. Developing the new concept for r&d-activity, both at the level of representations and of new practices, requires universities of applied sciences to adopt new methods in which the actors are partake in construction of new concepts of activity through adequate discussion, analysis and debate. R&d -activity can progress, if instead of implementing partial solutions, the totality of the activities (i.e. the group of partial solutions acting together) will be constructed. The development of the activity system requires many simultaneous changes as well as wide-ranging know-how and discussion related to these changes. What is perhaps most important, however, is that the group of developers mature into a determined collective actor which can engage in many agentive actions. The development of the agency is fundamental to progress.

Evidence of Partisan Emphasis on EMU during 1994–1999 : Comparing Finnish Parties

This study explores the EMU stand taken by the major Finnish political parties from 1994 to 1999. The starting point is the empirical evidence showing that party responses to European integration are shaped by a mix of national and cross-national factors, with national factors having more explanatory value. The study is the first to produce evidence that classified party documents such as protocols, manifestos and authoritative policy summaries may describe the EMU policy emphasis. In fact, as the literature review demonstrates, it has been unclear so far what kind of stand the three major Finnish political parties took during 1994–1999. Consequently, this study makes a substantive contribution to understanding the factors that shaped EMU party policies, and eventually, the national EMU policy during the 1990s. The research questions addressed are the following: What are the main factors that shaped partisan standpoints on EMU during 1994–1999? To what extent did the policy debate and themes change in the political parties? How far were the policies of the Social Democratic Party, the Centre Party and the National Coalition Party shaped by factors unique to their own national contexts? Furthermore, to what extent were they determined by cross-national influences from abroad, and especially from countries with which Finland has a special relationship, such as Sweden? The theoretical background of the study is in the area of party politics and approaches to EU policies, and party change, developed mainly by Kevin Featherstone, Peter Mair and Richard Katz. At the same time, it puts forward generic hypotheses that help to explain party standpoints on EMU. It incorporates a large quantity of classified new material based on primary research through content analysis and interviews. Quantitative and qualitative methods are used sequentially in order to overcome possible limitations. Established content-analysis techniques improve the reliability of the data. The coding frame is based on the salience theory of party competition. Interviews with eight party leaders and one independent expert civil servant provided additional insights and improve the validity of the data. Public-opinion surveys and media coverage are also used to complete the research path. Four major conclusions are drawn from the research findings. First, the quantitative and the interview data reveal the importance of the internal influences within the parties that most noticeably shaped their EMU policies during the 1990s. In contrast, international events play a minor role. The most striking feature turned out to be the strong emphasis by all of the parties on economic goals. However, it is important to note that the factors manifest differences between economic, democratic and international issues across the three major parties. Secondly, it seems that the parties have transformed into centralised and professional organisations in terms of their EMU policy-making. The weight and direction of party EMU strategy rests within the leadership and a few administrative elites. This could imply changes in their institutional environment. Eventually, parties may appear generally less differentiated and more standardised in their policy-making. Thirdly, the case of the Social Democratic Party shows that traditional organisational links continue to exist between the left and the trade unions in terms of their EMU policy-making. Hence, it could be that the parties have not yet moved beyond their conventional affiliate organisations. Fourthly, parties tend to neglect citizen opinion and demands with regard to EMU, which could imply conflict between the changes in their strategic environment. They seem to give more attention to the demands of political competition (party-party relationships) than to public attitudes (party-voter relationships), which would imply that they have had to learn to be more flexible and responsive. Finally, three suggestions for institutional reform are offered, which could contribute to the emergence of legitimised policy-making: measures to bring more party members and voter groups into the policy-making process; measures to adopt new technologies in order to open up the policy-formation process in the early phase; and measures to involve all interest groups in the policy-making process.

Two views on interstellar dust: near-infrared scattering and polarized thermal dust emission

Interstellar clouds are not featureless, but show quite complex internal structures of filaments and clumps when observed with high enough resolution. These structures have been generated by 1) turbulent motions driven mainly by supernovae, 2) magnetic fields working on the ions and, through neutral-ion collisions, on neutral gas as well, and 3) self-gravity pulling a dense clump together to form a new star. The study of the cloud structure gives us information on the relative importance of each of these mechanisms, and helps us to gain a better understanding of the details of the star formation process. Interstellar dust is often used as a tracer for the interstellar gas which forms the bulk of the interstellar matter. Some of the methods that are used to derive the column density are summarized in this thesis. A new method, which uses the scattered light to map the column density in large fields with high spatial resolution, is introduced. This thesis also takes a look at the grain alignment with respect to the magnetic fields. The aligned grains give rise to the polarization of starlight and dust emission, thus revealing the magnetic field. The alignment mechanisms have been debated for the last half century. The strongest candidate at present is the radiative torques mechanism. In the first four papers included in this thesis, the scattered light method of column density estimation is formulated, tested in simulations, and finally used to obtain a column density map from observations. They demonstrate that the scattered light method is a very useful and reliable tool in column density estimation, and is able to provide higher resolution than the near-infrared color excess method. These two methods are complementary. The derived column density maps are also used to gain information on the dust emissivity within the observed cloud. The two final papers present simulations of polarized thermal dust emission assuming that the alignment happens by the radiative torques mechanism. We show that the radiative torques can explain the observed decline of the polarization degree towards dense cores. Furthermore, the results indicate that the dense cores themselves might not contribute significantly to the polarized signal, and hence one needs to be careful when interpreting the observations and deriving the magnetic field.

A Historical Approach to Children s Physics Education : Modelling of DC-circuit Phenomena in a Small Group

This three-phase design research describes the modelling processes for DC-circuit phenomena. The first phase presents an analysis of the development of the DC-circuit historical models in the context of constructing Volta s pile at the turn of the 18th century. The second phase involves the designing of a teaching experiment for comprehensive school third graders. Among other considerations, the design work utilises the results of the first phase and research literature of pupils mental models for DC-circuit phenomena. The third phase of the research was concerned with the realisation of the planned teaching experiment. The aim of this phase was to study the development of the external representations of DC-circuit phenomena in a small group of third graders. The aim of the study has been to search for new ways to guide pupils to learn DC-circuit phenomena while emphasing understanding at the qualitative level. Thus, electricity, which has been perceived as a difficult and abstract subject, could be learnt more comprehensively. Especially, the research of younger pupils learning of electricity concepts has not been of great interest at the international level, although DC-circuit phenomena are also taught in the lower classes of comprehensive schools. The results of this study are important, because there has tended to be more teaching of natural sciences in the lower classes of comprehensive schools, and attempts are being made to develop this trend in Finland. In the theoretical part of the research an Experimental-centred representation approach, which emphasises the role of experimentalism in the development of pupil s representations, is created. According to this approach learning at the qualitative level consists of empirical operations like experimenting, observations, perception, and prequantification of nature phenomena, and modelling operations like explaining and reasoning. Besides planning teaching, the new approach can be used as an analysis tool in describing both historical modelling and the development of pupils representations. In the first phase of the study, the research question was: How did the historical models of DC-circuit phenomena develop in Volta s time? The analysis uncovered three qualitative historical models associated with the historical concept formation process. The models include conceptions of the electric circuit as a scene in the DC-circuit phenomena, the comparative electric-current phenomenon as a cause of different observable effect phenomena, and the strength of the battery as a cause of the electric-current phenomenon. These models describe the concept formation process and its phases in Volta s time. The models are portrayed in the analysis using fragments of the models, where observation-based fragments and theoretical fragements are distinguished from each other. The results emphasise the significance of the qualitative concept formation and the meaning of language in the historical modelling of DC-circuit phenomena. For this reason these viewpoints are stressed in planning the teaching experiment in the second phase of the research. In addition, the design process utilised the experimentation behind the historical models of DC-circuit phenomena In the third phase of the study the research question is as follows: How will the small group s external representations of DC-circuit phenomena develop during the teaching experiment? The main question is divided into the following two sub questions: What kind of talk exists in the small group s learning? What kinds of external representations for DC-circuit phenomena exist in the small group discourse during the teaching experiment? The analysis revealed that the teaching experiment of the small group succeeded in its aim to activate talk in the small group. The designed connection cards proved especially successful in activating talk. The connection cards are cards that represent the components of the electric circuit. In the teaching experiment the pupils constructed different connections with the connection cards and discussed, what kinds of DC-circuit phenomena would take place in the corresponding real connections. The talk of the small group was analysed by comparing two situations, firstly, when the small group discussed using connections made with the connection cards and secondly with the same connections using real components. According to the results the talk of the small group included more higher-order thinking when using the connection cards than with similar real components. In order to answer the second sub question concerning the small group s external representations that appeared in the talk during the teaching experiment; student talk was visualised by the fragment maps which incorporate the electric circuit, the electric current and the source voltage. The fragment maps represent the gradual development of the external representations of DC-circuit phenomena in the small group during the teaching experiment. The results of the study challenge the results of previous research into the abstractness and difficulty of electricity concepts. According to this research, the external representations of DC-circuit phenomena clearly developed in the small group of third graders. Furthermore, the fragment maps uncover that although the theoretical explanations of DC-circuit phenomena, which have been obtained as results of typical mental model studies, remain undeveloped, learning at the qualitative level of understanding does take place.

Slummiparakeista kyläkarnevaaleihin : Kumpulan ja Toukolan imagonmuutos sanomalehdissä 1963-1999

Having to do with residential areas, geographical image research in Finland has concentrated mainly on those areas with a relatively negative image, such as eastern parts of Helsinki. However, Kumpula and Toukola are former working class residential areas whose image nowadays is mainly positive. This research aims at understanding the process through which their image has gradually come to be that way. Theoretical background of the research relies on human geography and it s viewpoints on places, spaces and areas. Areas, in this research, are understood to be founded on discursive processes that form meanings in societies. This approach is useful because it provides a way to research newspapers and to see how they affect the society. In addition I lean on Sirpa Tani s research on place images to study image and it s formation process. Her point of view covers especially well the effect of media on images and their formation. Articles published in Helsingin Sanomat and Ilta-Sanomat between the years 1963 and 1999 form the data of the research. Methodologically I proceeded by using content analysis to see what kind of topics have been dominating the news feed from Kumpula and Toukola. Content analysis was followed by discourse analysis, which allowed me to focus on the ways of speaking about and representing Kumpula and Toukola. Discourse analysis also reveals whose viewpoint is being represented in media when it comes to publishing news from these parts of the city. It is clearly visible from the results of this research that the image of Kumpula and Toukola has gone through a significant change between 1963 and 1999. In the 1960s discussion in newspapers was dominated by the need for more effective city planning. This meant that Kumpula and Toukola were under a demolition threat in order for the city to built more effectively on those areas. At the same time there was discussion about wooden houses that were built in Kumpula and Toukola right after the second World War. Those houses were in a poor condition, it was even said in the newspapers that people were living in slum-like conditions in them. By the 1980s the image of Kumpula and Toukola gradually started to change. At this time gentrification process was affecting the areas and well-educated working force moved to Kumpula and Toukola. Already in the beginning of 1990s the image of the areas was highly positive. Throughout this decade newspapers published news on Kumpula and Toukola that commented favorably on the atmosphere and the feeling of togetherness among the residents. In addition Kumpula village carnivals, that were first held in 1991, brought a lot of positive publicity to the areas. This research has revelead that especially the active participationg of the residents to promote joint causes has positively affected the image of Kumpula and Toukola. Since the 1960s fighting for the preservation of the areas has provided a reason for a stronger feeling of communality and identifying in the community. This feeling of togetherness in a community has carried all the way to the 1990s, when the areas, having been affected by gentrification, could make good use of the positive image in order to promote joint causes. Keywords: Image, reputation, newspapers, discursive practices

Asynchronous behaviour in some three-atom linear concerted radical-exchange reactions

A few simple three-atom thermoneutral radical exchange reactions (i.e. A + BC --> AB + C) are examined by ab initio SCF methods. Emphasis is laid on the detailed analysis of density matrices rather than on energetics. Results reveal that the sum of the bond orders of the breaking and forming bonds is not conserved to unity, due to development of free valence on the migrating atom 'B' in the transition state. Bond orders, free valence and spin densities on the atoms are calculated. The present analysis shows that the bond-cleavage process is always more advanced than the bond-formation process in the transition state. Further analysis shows a development of the negative spin density on the migrating atom 'B' in the transition state. The depletion of the alpha-spin density on the radical site "A" in the reactant during the reaction lags behind the growth of the alpha-spin density on the terminal atom "C" of the reactant bond, 'B-C' in the transition state. But all these processes are completed simultaneously at the end of the reaction. Hence, the reactions are asynchronous but kinetically concerted in most cases.

Self-assembled flower-like nanostructures of InN and GaN grown by plasma-assisted molecular beam epitaxy

Nanosized hexagonal InN flower-like structures were fabricated by droplet epitaxy on GaN/Si(111) and GaN flower-like nanostructure fabricated directly on Si(111) substrate using radio frequency plasma-assisted molecular beam epitaxy. Powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to study the crystallinity and morphology of the nanostructures. Moreover, X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) were used to investigate the chemical compositions and optical properties of nano-flowers, respectively. Activation energy of free exciton transitions in GaN nano-flowers was derived to be similar to 28.5 meV from the temperature dependent PL studies. The formation process of nano-flowers is investigated and a qualitative mechanism is proposed.

Reactivation kinetics of boron acceptors in hydrogenated silicon during zero bias anneal

The reactivation kinetics of passivated boron accepters in hydrogenated silicon during zero bias annealing in the temperature range of 65-130 degrees C are reported, For large annealing times and high annealing temperatures, the reactivation process follows second-order kinetics and is rate limited by a thermally activated <(H)over tilde (2)> complex formation process, For short annealing times and low annealing temperatures, the reactivation rate is found to be larger than that due to <(H)over tilde (2)> complex formation alone. We conclude that the faster reactivation is caused by the diffusion of the liberated hydrogen atoms into the bulk as well as <(H)over tilde (2)> complex formation. The effective diffusion coefficient of hydrogen is measured and found to obey the Arrhenius relation with an activation energy (1.41 +/- 0.1) eV. (C) 1997 American Institute of Physics.

DOES THE CHEMOTHERMAL INSTABILITY HAVE ANY ROLE IN THE FRAGMENTATION OF PRIMORDIAL GAS

The collapse of the primordial gas in the density regime similar to 10(8)-10(10) cm(-3) is controlled by the three-body H-2 formation process, in which the gas can cool faster than free-fall time-a condition proposed as the chemothermal instability. We investigate how the heating and cooling rates are affected during the rapid transformation of atomic to molecular hydrogen. With a detailed study of the heating and cooling balance in a 3D simulation of Pop III collapse, we follow the chemical and thermal evolution of the primordial gas in two dark matter minihalos. The inclusion of sink particles in modified Gadget-2 smoothed particle hydrodynamics code allows us to investigate the long-term evolution of the disk that fragments into several clumps. We find that the sum of all the cooling rates is less than the total heating rate after including the contribution from the compressional heating (pdV). The increasing cooling rate during the rapid increase of the molecular fraction is offset by the unavoidable heating due to gas contraction. We conclude that fragmentation occurs because H-2 cooling, the heating due to H-2 formation and compressional heating together set a density and temperature structure in the disk that favors fragmentation, not the chemothermal instability.