The influence of parent's body mass index on peer selection: An experimental approach using virtual reality

Relatively little is known about the influence of psychosocial factors, such as familial role modeling and social network on the development and maintenance of childhood obesity. We investigated peer se- lection using an immersive virtual reality environment. In a virtual schoolyard, children were confronted with normal weight and overweight avatars either eating or playing. Fifty-seven children aged 7–13 participated. Interpersonal distance to the avatars, child's BMI, self-perception, eating behavior and parental BMI were assessed. Parental BMI was the strongest predictor for the children's minimal distance to the avatars. Specifically, a higher mothers' BMI was associated with greater interpersonal distance and children approached closer to overweight eating avatars. A higher father's BMI was associated with a lower interpersonal distance to the avatars. These children approached normal weight playing and overweight eating avatar peers closest. The importance of parental BMI for the child's social approach/ avoidance behavior can be explained through social modeling mechanisms. Differential effects of pa- ternal and maternal BMI might be due to gender specific beauty ideals. Interventions to promote social interaction with peer groups could foster weight stabilization or weight loss in children.

An elementary treatise on the differential calculus : containing the theory of plane curves, with numerous examples /

Includes index.

Design of few-mode fibers with up to 12 modes and low differential mode delay

In this paper, we investigate the design of few-mode fibers (FMFs) guiding 4 to 12 non-degenerate linearly polarized (LP) modes with low differential mode delay (DMD) over the C-band, suitable for long-haul transmission. The refractive index profile considered is composed by a graded-core with a cladding trench (GCCT). The optimization of the profile parameters aims the lowest possible DMD and macro-bend losses (MBL) lower than the ITU-T standard recommendation. The optimization results show that the optimum DMD and the MBL scale with the number of modes. Additionally, it is shown that the refractive-index relative difference at the core center is one of the most preponderant parameters, allowing to reduce the DMD at the expense of increasing MBL. Finally, the optimum DMD obtained for 12 LP modes is lower than 3 ps/km. © 2014 IEEE.

Design of few-mode fibers with M-modes and low differential mode delay

In this paper, we investigate the design of few-mode fibers (FMFs) guiding 2 to 12 linearly polarized (LP) modes with low differential mode delay (DMD) over the C-band, suitable for long-haul transmission. Two different types of refractive index profile have been considered: a graded-core with a cladding trench (GCCT) profile and a multi-step-index (MSI) profile. The profiles parameters are optimized in order to achieve: the lowest possible DMD and macro-bend losses (MBL) lower than the ITU-T standard recommendation. The optimization results show that the MSI profiles present lower DMD than the minimum achieved with a GCCT profile. Moreover, it is shown that the optimum DMD and the MBL scale with the number of modes for both profiles. The optimum DMD obtained for 12 LP modes is lower than 3 ps/km using a GCCT profile and lower than 2.5 ps/km using a MSI profile. The optimization results reveal that the most preponderant parameter of the GCCT profile is the refractive index relative difference at the core center, Δnco. Reducing Δn co, the DMD is reduced at the expense of increasing the MBL. Regarding the MSI profiles, it is shown that 64 steps are required to obtain a DMD improvement considering 12 LP modes. Finally, the impact of the fabrication margins on the optimum DMD is analyzed. The probability of having a manufactured FMF with 12 LP modes and DMD lower than 12 ps/km is approximately 68% using a GCCT profile and 16% using a MSI profile. © 2013 IEEE.

Design of few-mode fibers with arbitrary and flattened differential mode delay

This letter proposes the use of a refractive index profile with a graded core and a cladding trench for the design of few-mode fibers, aiming an arbitrary differential mode delay (DMD) flattened over the C+ L band. By optimizing the core grading exponent and the dimensioning of the trench, a deviation lower than 0.01 ps/km from a target DMD is observed over the investigated wavelength range. Additionally, it is found that the dimensioning of the trench is almost independent of the target DMD, thereby enabling the use of a simple design rule that guarantees a maximum DMD deviation of 1.8 ps/km for a DMD target between-200 and 200 ps/km. © 2012 IEEE.

Gevrey Local Solvability for Semilinear Partial Differential Equations

2002 Mathematics Subject Classification: 35S05

Alkenone unsaturation index and alkenones in ODP Hole 161-977A

A number of essential elements closely related to each other are involved in the Earth's climatic system. The temporal and spatial distribution of insolation determines wind patterns and the ocean's thermohaline pump. In turn, these last two are directly linked to the extension and retreat of marine and continental ice and to the chemistry of the atmosphere and the ocean. The variability of these elements may trigger, amplify, sustain or globalize rapid climatic changes. Paleoclimatic oscillations have been identified in this thesis by using fossil organic compounds synthesized by marine and terrestrial flora. High sedimentation rate deposits at the Barents and the Iberian peninsula continental margins were chosen in order to estimate the climatic changes on centennial time resolution. At the Barents margin, the sediment recovered was up to 15,000 years old (unit ''a'', from latin ''annos'') (M23258; west of the Bjørnøya island). At the Iberian margin, the sediment cores studied covered a wide range of time spans: up to 115,000 a (MD99-2343; north of the Minorca island), up to 250,000 a (ODP-977A; Alboran basin) and up to 420,000 a (MD01-2442, MD01-2443, MD01-2444, MD01-2445; close to the Tagus abyssal plain). At the northern site, inputs containing marine, continental and ancient reworked organic matter provided a detailed reconstruction of climate history at the time of the final retreat of the Barents ice sheet. At the western Barents continental slope, warm climatic conditions were observed during the early Holocene (~from 8,650 a to 5,240 a ago); in contrast, an apparent long-term cooling trend occurred in the late Holocene (~from 5,240 a to 760 a ago), in consistence with other paleoarchives from northern and southern European latitudes. The Iberian margin sites, which were never covered with large ice sheets, preserved exceptionally complete sequences of rapid events during ice ages hitherto not studied in such great detail: during the last glacial (~from 70,900 a to 11,800 a ago), the second glacial (~from 189,300 a to 127,500 a ago), the third ice age (~from 278,600 a to 244,800 a ago) and the fourth (~from 376,300 a to 337,500 a ago). In this thesis, crucial research questions were brought up concerning the severity of different glacial periods, the intensity and rates of the recorded oscillations and the long distance connections related to rapid climate change. The data obtained provide a sound basis to further research on the mechanisms involved in this rapid climate variability. An essential point of the research was the evidence that, over the past 420,000 a, at the whole Iberian margin, warm and stable long periods similar to the Holocene always ended abruptly in few centuries after a gradual deterioration of climate conditions. The detailed estimate of past climate variability provides clues to the natural end of the present warm period. Returning to an ice age in European lands would be exacerbated by a number of factors: a lack of differential solar heating between northern and southern north Atlantic latitudes, enhanced evaporation at low latitudes, and an increase in snowfall or iceberg discharges at northern regions. It must be emphasized that all climatic oscillations observed in this thesis were caused by forces of nature, i.e. the last two centuries were not taken into consideration.

Informal caregiving and mental ill health – differential relationships by workload, gender, age and area-remoteness in a UK region

Informal caregiving can be a demanding role which has been shown to impact on physical, psychological and social wellbeing. Methodological weaknesses including small sample sizes and subjective measures of mental health have led to inconclusive evidence about the relationship between informal caregiving and mental health. This paper reports on a study carried out in a UK region which investigated the relationship between informal caregiving and mental ill health. The analysis was conducted by linking three datasets, the Northern Ireland Longitudinal Study, the Northern Ireland Enhanced Prescribing Database and the Proximity to Service Index from the Northern Ireland Statistics and Research Agency. Our analysis used both a subjective measure of mental ill health, i.e. a question asked in the 2011 Census, and an objective measure, whether the respondents had been prescribed antidepressants by a General Practitioner between 2010 and 2012. We applied binary logistic multilevel modelling to these two responses to test whether, and for what sub-groups of the population, informal caregiving was related to mental ill health. The results showed that informal caregiving per se was not related to mental ill health although there was a strong relationship between the intensity of the caregiving role and mental ill health. Females under 50, who provided over 19 hours of care, were not employed or worked part-time and who provided care in both 2001 and 2011 were at a statistically significantly elevated risk of mental ill health. Caregivers in remote areas with limited access to shops and services were also at a significantly increased risk as evidenced by prescription rates for antidepressants. With community care policies aimed at supporting people to remain at home, the paper highlights the need for further research in order to target resources appropriately.

A rare case of postpartum thrombocytosis. Differential diagnosis and management

This is a case of a 43-year-old primigravida primipara woman who presented in our Department in 36 weeks gestational age and underwent caesarean section due to preeclampsia. From her history, it was known that her pregnancy was an in vitro fertilization (IVF) result. She also received low molecular weight heparin because of thrombophilia (protein S insufficiency). We present this case of postpartum thrombocytosis and discuss the differential diagnosis of this condition through the presentation of its management.

TRIPS and Special & Differential Treatment – Revisiting the Case for Derogations in Applying Patent Protection for Pharmaceuticals in Developing Count

In this paper we apply an implicit threshold approach, malleable to the principle of graduation, to identify countries that should benefit from derogations from WTO TRIPS commitments for pharmaceutical patents under the tenets of Special and Differential Treatment. This is based on the identification of four broad constraints loosely classified as; economic constraints; access topharmaceuticals; capacity constraints; and incidence of health outcomes. We identify these by means of analytical criteria and create a composite index that ranks countries according to the observed constraints which delimit the capabilities and desirability of implementing TRIPs disciplines. We discuss the use of negotiated weights and thresholds in determining participation and graduation into general provisions of the agreement. It follows that countries below the chosen threshold should be exempt from these hence receiving Special and Differential Treatment.

Micropolar flow in a porous channel with high mass transfer

Two dimensional flow of a micropolar fluid in a porous channel is investigated. The flow is driven by suction or injection at the channel walls, and the micropolar model due to Eringen is used to describe the working fluid. An extension of Berman's similarity transform is used to reduce the governing equations to a set of non-linear coupled ordinary differential equations. The latter are solved for large mass transfer via a perturbation analysis where the inverse of the cross-flow Reynolds number is used as the perturbing parameter. Complementary numerical solutions for strong injection are also obtained using a quasilinearisation scheme, and good agreement is observed between the solutions obtained from the perturbation analysis and the computations.