Effects of spray nozzles and spray volume on spodoptera frugiperda management and narrow row corn performance

The high demand of pesticides in the production systems makes the application technology one of the main alternatives to optimize the products efficiency. In this context, the study aimed to evaluate the effects of spray nozzles and spray volumes on spraying deposits, armyworm control and crop corn performance in narrow row sowing system. The experiment was carried out at experimental area of Sao Paulo State University, Campus of Botucatu/SP, Brazil, during the 2009/2010 agricultural season, in randomized blocks with factorial scheme (2x2+1) and four replications. It was tested two flat fan spray nozzles (with and without air induction) combined with two spray volumes (100 and 200 L ha-1) plus a control treatment. There was no influence of spray nozzles (without air induction) in the spray deposits levels on plants. However, the flat fan nozzle with air induction was more effective on fall armyworm, with 100% of control against 47.84% from other at 15 days after spraying. The increase in the spray volume promoted high spray deposits (415.4 and 388.6 μL g-1 dry mass for flat fan nozzle with and without air induction, respectively at V10 growth stage) and consequently, the highest spray volume (200 L-1) was more efficient in the fall armyworm suppression, with 100% of control. All the technologies tested showed lower plant injury from fall armyworm. The insecticide sprayed with different technologies did not affect the parameters of plant height and leaf area index. The corn productivity was directly related with control efficiency of fall armyworm. © 2012 Academic Journals Inc.

Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

Phytase production by Rhizopus microsporus var. microsporus biofilm: characterization of enzymatic activity after spray drying in presence of carbohydrates and nonconventional adjuvants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Producing xylan/Eudragit (R) S100-based microparticles by chemical and physico-mechanical approaches as carriers for 5-aminosalicylic acid

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Stability of curcumin microencapsulated by spray and freeze drying in binary and ternary matrices of maltodextrin, gum arabic and modified starch

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spray adjuvant characteristics affecting agricultural spraying drift

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Physicochemical aspects involved in methotrexate release kinetics from biodegradable spray-dried chitosan microparticles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A comparison of three different methodologies for evaluating Rhipicephalus (Boophilus) rnicroplus susceptibility to topical spray compounds

This study aimed to compare three different methodologies (Adult Immersion Tests, field trials with naturally infected animals, and a Stall Test using artificially infested cattle) to evaluate the efficacy of two topical formulations that we administered as whole body sprays (15% Cypermethrin + 30% Chlorpyriphos + 15% Fenthion-Colosso (R) FC 30, Ouro Fino Agronegocios; and 60% Dichlorvos + 20% Chlorpyriphos-Ectofos (R), Vallee Saude Animal Ltd.), against a susceptible strain of Rhipicephalus (Boophilus) microplus. To achieve this objective, two natural infestation trials were conducted, as well as two artificial infestation trials (Stall Tests) and two Adult Immersion Tests (AIT). The AIT results showed that both spray formulations achieved 100% efficacy against R. (B.) micro plus fully engorged females. However, when observing results obtained by field trials (natural infestations) and Stall Tests, none of these topically applied compounds reached 100% efficacy or affected the reproductive capacity of the fully engorged female ticks. Additional studies must be conducted to compare these in vivo methodologies with different in vitro techniques, such as the Larval Packet Test. However, based on results obtained here, we can conclude that depending on the spray formulations used, the AIT can overestimate acaricidal efficacy and values of reproductive efficiency of such compounds against R (B.) micro plus. Specifically, when dealing with spray formulations in the Stall Tests, the period of residual action can increase because these animals are sheltered from contact with environmental factors that might interfere with the efficacy of the products tested. It may be necessary to take in vivo trial results into consideration (such as field trials with naturally infested animals or Stall Tests) to standardize a specific in vitro assay, such as the Adult Immersion Test. (C) 2014 Elsevier B.V. All rights reserved.

Effect of a spray formulation on the reproductive parameters of a susceptible population of Rhipicephalus (Boophilus) microplus

The number of studies emphasizing the possible damage that acaricidal spray formulations can cause on engorged female ticks'reproductive parameters is small. The present study evaluated the deleterious effects of a spray formulation (dichlorvos 60% + chlorpyrifos 20%) on the reproductive parameters of a susceptible population of Rhipicephalus (B.) microplus females, using the Stall Test. The ticks were allocated randomly to treatments according to the mean numbers of females detached from each cow on days -3, -2 and -1 and the cattle pen location. The numbers of engorged female ticks that naturally detached from the cattle were counted daily from day 1 to day 30. For each group, 20 detached engorged female ticks or the available number collected daily were evaluated regarding reproductive parameters. Associations of organophosphates demonstrated elevated acaricidal efficacy, as well as deleterious effects on the reproductive parameters of R. (B.) microplus females. The engorged female weight (days 1 to 7), weight of egg masses (days 5 to 10) and larval hatching percentage (days 5 to 19) were decreased (P <= 0.05). It is possible that a formulation can lead to deleterious effects on R. (B.) microplus females when the tick population analyzed shows elevated sensitivity towards a particular formulation. However, further studies need to be conducted.

Effects of different spray formulations on the reproductive parameters of engorged Rhipicephalus (Boophilus) microplus females detached from experimentally infested cattle

This present study aimed to evaluate the deleterious effects of some commercially available spray formulations (15% Cypermethrin+25% Chlorpyriphos+1% Citronellal and 8% Cypermethrin+60% Ethion) on the reproductive parameters of engorged Rhipicephalus (Boophilus) microplus females that detached from experimentally infested cattle. The following reproductive parameters of engorged female ticks were analyzed: female weight, egg mass weight, percentage of hatchability, percentage of reduction in oviposition, percentage of reduction in hatchability, reproductive efficiency and percent control/efficacy of formulations for reproductive parameters. Our findings showed that although the strain R. (B.) microplus used in both experiments was thought to be sensitive to the test compounds because of the acaricidal efficacy observed throughout these trials, it was not possible to observe overall deleterious effects on the reproductive parameters of this tick species with both spray formulations. However, the 8% Cypermethrin+60% Ethion showed short-term significant effects on the weight of female ticks between the 14th and 16th days post-treatment and the weight of female and the egg mass weight between the 20th and 22nd days post-treatment. New studies should be conducted to show if these results regarding the reproductive parameters of fully engorged R. (B.) microplus females, combined with the acaricidal efficacy can be sufficient to reduce the number of chemical treatments administered to cattle.

Digestibilidade e exigência de aminoácidos para rã-touro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processing of Apeiba tibourbou Aubl. Extract Via Spray Drying

The effects of drying air inlet temperature (IT) and concentration of Aerosil 200 (C-A) on several properties of spray-dried Apeiba tibourbou extracts were investigated following a 3(2) full factorial design. Powder recovery varied from 9.83 to 46.95% and dried products showed moisture contents below 7%. Although the spray-dried products lost some of their polyphenols, they still present excellent antioxidant activity, opening perspectives for its use to medicinal purpose. C-A exerted a key role on the properties of spray-dried extracts, while IT did not present a significative influence. Aerosil (R) 200 proved to be an interesting alternative as an excipient for the drying of the herbal extract, even at intermediate concentrations such as 15%. The best combination of conditions to use for obtaining dry A. tibourbou extracts with adequate physicochemical and functional properties involves an IT of 100 degrees C and a C-A of 15%.

Microencapsulation of lycopene by spray drying: Characterization, stability and application of microcapsules

Microencapsulation can be an alternative to minimize lycopene instability. Thus, the aim of this study was to microencapsulate lycopene by spray drying, using a modified starch (Capsul (R)) as an encapsulating agent, and to assess the functionality of the capsules applying them in cake. The quantity of lycopene was varied at 5, 10 and 15% in a solution containing 30% of solids in order to obtain the microcapsules. These microcapsules were evaluated as to encapsulation efficiency and morphology and then submitted to a stability test and applied in cakes. Encapsulation efficiency values varied between 21 and 29%. The microcapsules had a rounded outer surface with the formation of concavities and they varied in size. The stability test revealed that microencapsulation offered greater protection to lycopene compared to its free form and it was observed that the microcapsules were able to release pigment and color the studied food system in a homogenous manner. (C) 2011 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Microparticulated Hydrochlorothiazide Solid Dispersion: Enhancing Dissolution Properties via Spray Drying

The aim of the present study was to obtain microparticles of hydrochlorothiazide, a diuretic drug that practically insoluble in water, by spray drying and to investigate the influence of process parameters using a three-level, three-factor Box-Behnken design. Process yields, moisture content, particle size, flowability, and solubility were used to evaluate the spray-dried microparticles. The data were analyzed by response surface methodology using analysis of variance. The independent variables studied were outlet temperature, atomization pressure, and drug content. The formulations were prepared using polyvinylpyrrolidone and colloidal silicon dioxide as the hydrophilic carrier and drying aid, respectively. The microparticle yield ranged from 18.15 to 59.02% and resulted in adequate flow (17 to 32 degrees), moisture content between 2.52 to 6.18%, and mean particle size from 45 to 59 mu m. The analysis of variance showed that the factors studied influenced the yields, moisture content, angle of repose, and solubility. Thermal analysis and X-ray diffractometry evidenced no drug interactions or chemical modifications. Photomicrographs obtained by scanning electron microscopy showed spherical particles. The solubility and dissolution rates of hydrochlorothiazide were remarkably improved when compared with pure drug. Therefore, the results confirmed the high potential of the spray-drying technique to obtain microparticulate hydrochlorothiazide with enhanced pharmaceutical and dissolution properties.