Content and methodology of predoctoral Geriatric Dentistry teaching in Europe

Objectives: To explore the content and methodology of predoctoral Geriatric Dentistry teaching amongst European dental schools.
Methods: The study was conducted by the European College of Gerodontology (ECG) Education Committee. Αn electronic questionnaire has been developed with close and open-ended items, including information on the prevalence and institutional anchorage of Gerodontology programs, the educators, the content and the methodology of teaching. An electronic mail, including a hyperlink to the questionnaire, was sent to 216 dental schools in 39 European countries (Winter/ Spring 2016). The Deans were asked to either answer themselves, or forward the link to faculty members with knowledge on Gerodontology teaching at their respective schools. Repeated reminders or telephone calls were used for non-respondents and personal networks were exploited to identify potential contact persons.
Results: Until August 2016, 121 dental schools from 29 countries responded to the survey (response rate 56%, EU response rate: 60%). Gerodontology was included in the predoctoral curricula of 86% of the respondents and was compulsory in 68%. The course was mainly offered in senior students and was interdisciplinary in 30% of the schools, delivered mainly by dentists (79%), physicians (21%), psychologists (10%), and nurses (5%). It was conducted as an independent lecture series in 40% of the schools and a course director was assigned in 44% of the respondents. When embedded in other disciplines, these were mainly Prosthodontics (31%). The content included a large number of items, such as epidemiology of oral health, medical problems in old age, prosthodontic management, xerostomia, and caries risk assessment. Lectures were the most common teaching format (69%), followed by small group seminars (27%). The most common types of educational material used were scientific articles (48%), printed textbooks (44%), lecture notes (40%) and e-learning material (21%). Clinical training was offered by 64% of the respondents, within the dental school clinics (49%) and/or in outreach locations (40%).
Conclusion: Amongst the respondent European dental schools (66%) there is an increasing number that teach Gerodontology at a pre-doctoral level with significant variations in content and methodology. Official guidelines and the dissemination of the ECG pre-doctoral curriculum guidelines might help to increase the prevalence and improve the status of Gerodontology teaching in Europe.

Curriculum, content and controversy in higher education

Recent evidence suggest that academic staff face difficulties in applying new technologies as a means of assessing higher order assessment outcomes such as critical thinking, problem solving and creativity. Although higher education institutional mission statements and course unit outlines purport the value of these higher order skills there is still some question about how well academics are equipped to design curricula and, in particular, assessment strategies accordingly. Despite a rhetoric avowing the benefits of these higher order skills, it has been suggested that academics set assessment tasks up in such a way as to inadvertently lead students on the path towards lower order outcomes. This is a controversial claim, and one that this paper seeks to explore and critique in terms of challenging the conceptual basis of assessing higher order skills through new technologies. It is argued that the use of digital media in higher education is leading to a focus on student's ability to use and manipulate of these products as an index of their flexibility and adaptability to the demands of the knowledge economy. This focus mirrors market flexibility and encourages programmes and courses of study to be rhetorically packaged as such. Curricular content has becomes a means to procure more or less elaborate aggregates of attributes. Higher education is now charged with producing graduates who are entrepreneurial and creative in order to drive forward economic sustainability. It is argued that critical independent learning can take place through the democratisation afforded by cultural and knowledge digitization and that assessment needs to acknowledge the changing relations between audience and author, expert and amateur, creator and consumer.

Behaviour and design of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.

Inter- and intra- project knowledge transfer : analysis of knowledge transfer techniques

Many studies in the area of project management and social networks have identified the significance of project knowledge transfer within and between projects. However, only few studies have examined the intra- and inter-projects knowledge transfer activities. Knowledge in projects can be transferred via face-to-face interactions on the one hand, and via IT-based tools on the other. Although companies have allocated many resources to the IT tools, it has been found that they are not always effectively utilised, and people prefer to look for knowledge using social face-to-face interactions. This paper explores how to effectively leverage two alternative knowledge transfer techniques, face-to-face and IT-based tools to facilitate knowledge transfer and enhance knowledge creation for intra- and inter-project knowledge transfer. The paper extends the previous research on the relationships between and within teams by examining the project’s external and internal knowledge networks concurrently. Social network qualitative analysis, using a case study within a small-medium enterprise, was used to examine the knowledge transfer activities within and between projects, and to investigate knowledge transfer techniques. This paper demonstrates the significance of overlapping employees working simultaneously on two or more projects and their impact on facilitating knowledge transfer between projects within a small/medium organisation. This research is also crucial to gaining better understanding of different knowledge transfer techniques used for intra- and inter-project knowledge exchange. The research provides recommendations on how to achieve better knowledge transfer within and between projects in order to fully utilise a project’s knowledge and achieve better project performance.

A connective model for the practice-led research exegesis : an analysis of content and structure

Since the formal recognition of practice-led research in the 1990s, many higher research degree candidates in art, design and media have submitted creative works along with an accompanying written document or ‘exegesis’ for examination. Various models for the exegesis have been proposed in university guidelines and academic texts during the past decade, and students and supervisors have experimented with its contents and structure. With a substantial number of exegeses submitted and archived, it has now become possible to move beyond proposition to empirical analysis. In this article we present the findings of a content analysis of a large, local sample of submitted exegeses. We identify the emergence of a persistent pattern in the types of content included as well as overall structure. Besides an introduction and conclusion, this pattern includes three main parts, which can be summarized as situating concepts (conceptual definitions and theories); precedents of practice (traditions and exemplars in the field); and researcher’s creative practice (the creative process, the artifacts produced and their value as research). We argue that this model combines earlier approaches to the exegesis, which oscillated between academic objectivity, by providing a contextual framework for the practice, and personal reflexivity, by providing commentary on the creative practice. But this model is more than simply a hybrid: it provides a dual orientation, which allows the researcher to both situate their creative practice within a trajectory of research and do justice to its personally invested poetics. By performing the important function of connecting the practice and creative work to a wider emergent field, the model helps to support claims for a research contribution to the field. We call it a connective model of exegesis.

User-created content and everyday cultural practice : lessons from YouTube

This chapter sets out the debates about the changing role of audiences in relation to user-created content as they appear in New Media and Cultural Studies. The discussion moves beyond the simple dichotomies between active producers and passive audiences, and draws on empirical evidence, in order to examine those practices that are most ordinary and widespread. Building on the knowledge of television’s role in facilitating public life, and the everyday, affective practices through which it is experienced and used, I focus on the way in which YouTube operates as a site of community, creativity and cultural citizenship; and as an archive of popular cultural memory.

Xiamen Hai Cang tourism project : landscape planning and design of five islands

International practice-led design research in landscape architecture has identified the need for addressing the loss of biodiversity in urban environments. China has lost much of its biodiversity in rural and urban environments over thousands of years. However some Chinese cities have attempted to conserve what remains and enhance existing vegetation communities in isolated pockets. Island biogeography has been used as the basis for planning and designing landscapes in Australia and North America but not as yet in China, as far as we know. A gap in landscape design knowledge exists regarding how to apply landscape ecology concepts to urban islands of remaining biodiversity being developed for heavy Chinese domestic tourism impacts in the future. This project responded to the demands for harbour-side tourism opportunities in Xiamen City, Fujian Province, by proposing a range of eco-design innovations using concepts of patch, edge and interior to interconnect people and nature in a Chinese setting.

Stage 1 of the Yueyang Urban Water System Project: Landscape planning and design of Wangjia River

Chinese landscape architects are largely focused on objective practical solutions to environmental problems. In the West, theoretical landscape knowledge is largely conceptual and abstract. This research debated how Australian ecological concepts could or should be transposed to Chinese landscapes. This project responded to severe water and soil pollution issues in the estuarine and riparian zones of rivers flowing into Dongting Lake, in Yueyang City, Hunan Province. This work proposed a range of waterfront design innovations that challenged the notion of corridor as habitat, filter, barrier and conduit in a Chinese riparian context.

Shijiazhuang ecological landscape planning and design comprehensive improvement program for the Hutuo River

International practice-led design research in landscape architecture has identified water quality and water availability as two of the most important environmental issues in developing countries. China is particularly focused on improving water supplies for its rural and urban populations. However a significant gap in knowledge exists between urban planning and environmental engineering in China as to how to design Chinese public open spaces to reduce water pollution in urban rivers. This project responded to traditional zoning methods in Shijiazhuang City, Hebei Province, by proposing a range of water sensitive design innovations from lake construction to planting design to modify standardised engineering solutions in a Chinese context.

Content and functionality of alcohol and other drug websites : results of an online survey

Background: There is a growing trend for individuals to seek health information from online sources. Alcohol and other drug (AOD) use is a significant health problem worldwide, but access and use of AOD websites is poorly understood. ----- ----- Objective: To investigate content and functionality preferences for AOD and other health websites. Methods: An anonymous online survey examined general Internet and AOD-specific usage and search behaviors, valued features of AOD and health-related websites (general and interactive website features), indicators of website trustworthiness, valued AOD website tools or functions, and treatment modality preferences. ----- ----- Results: Surveys were obtained from 1214 drug (n = 766) and alcohol website users (n = 448) (mean age 26.2 years, range 16-70). There were no significant differences between alcohol and drug groups on demographic variables, Internet usage, indicators of website trustworthiness, or on preferences for AOD website functionality. A robust website design/navigation, open access, and validated content provision were highly valued by both groups. While attractiveness and pictures or graphics were also valued, high-cost features (videos, animations, games) were minority preferences. Almost half of respondents in both groups were unable to readily access the information they sought. Alcohol website users placed greater importance on several AOD website tools and functions than did those accessing other drug websites: online screening tools (χ²2 = 15.8, P < .001, n = 985); prevention programs (χ²2 = 27.5, P < .001, n = 981); tracking functions (χ²2 = 11.5, P = .003, n = 983); self help treatment programs (χ²2 = 8.3, P = .02, n = 984); downloadable fact sheets for friends (χ²2 = 11.6, P = .003, n = 981); or family (χ²2 = 12.7, P = .002, n = 983). The most preferred online treatment option for both the user groups was an Internet site with email therapist support. Explorations of demographic differences were also performed. While gender did not affect survey responses, younger respondents were more likely to value interactive and social networking features, whereas downloading of credible information was most highly valued by older respondents. ----- ----- Conclusions: Significant deficiencies in the provision of accessible information on AOD websites were identified, an important problem since information seeking was the most common reason for accessing these websites, and, therefore, may be a key avenue for engaging website users in behaviour change. The few differences between AOD website users suggested that both types of websites may have similar features, although alcohol website users may more readily be engaged in screening, prevention and self-help programs, tracking change, and may value fact sheets more highly. While the sociodemographic differences require replication and clarification, these differences support the notion that the design and features of AOD websites should target specific audiences to have maximal impact.

Ezine and iRadio as knowledge creation metaphors for scaffolding learning in physical and virtual learning spaces

eZine and iRadio represent metaphors for multimedia communication on the Internet. Participating students experience a simulated Internet publishing environment in both their classroom and virtual learning environment. This chapter presents an autoethnographic account highlighting the voices of the learning designer and the teacher and provides evidence of the planning and implementation of two tertiary music elective courses over three iterations of each course. A blended learning environment was incorporated within each elective music course and a collaborative approach to development between lecturers, tutors, learning and technological designers using an iterative research design. The research suggests that learning design which provides real world examples and resources integrating authentic task design into their unit can provide meaningful and engaging experiences for students. The dialogue between learning designers and teachers and iterative review of the learning process and student outcomes, we believe, has engaged students meaningfully to achieve transferable learning outcomes.

Structural behaviour and design of cold-formed steel wall systems under fire conditions

In recent times, light gauge steel framed (LSF) structures, such as cold-formed steel wall systems, are increasingly used, but without a full understanding of their fire performance. Traditionally the fire resistance rating of these load-bearing LSF wall systems is based on approximate prescriptive methods developed based on limited fire tests. Very often they are limited to standard wall configurations used by the industry. Increased fire rating is provided simply by adding more plasterboards to these walls. This is not an acceptable situation as it not only inhibits innovation and structural and cost efficiencies but also casts doubt over the fire safety of these wall systems. Hence a detailed fire research study into the performance of LSF wall systems was undertaken using full scale fire tests and extensive numerical studies. A new composite wall panel developed at QUT was also considered in this study, where the insulation was used externally between the plasterboards on both sides of the steel wall frame instead of locating it in the cavity. Three full scale fire tests of LSF wall systems built using the new composite panel system were undertaken at a higher load ratio using a gas furnace designed to deliver heat in accordance with the standard time temperature curve in AS 1530.4 (SA, 2005). Fire tests included the measurements of load-deformation characteristics of LSF walls until failure as well as associated time-temperature measurements across the thickness and along the length of all the specimens. Tests of LSF walls under axial compression load have shown the improvement to their fire performance and fire resistance rating when the new composite panel was used. Hence this research recommends the use of the new composite panel system for cold-formed LSF walls. The numerical study was undertaken using a finite element program ABAQUS. The finite element analyses were conducted under both steady state and transient state conditions using the measured hot and cold flange temperature distributions from the fire tests. The elevated temperature reduction factors for mechanical properties were based on the equations proposed by Dolamune Kankanamge and Mahendran (2011). These finite element models were first validated by comparing their results with experimental test results from this study and Kolarkar (2010). The developed finite element models were able to predict the failure times within 5 minutes. The validated model was then used in a detailed numerical study into the strength of cold-formed thin-walled steel channels used in both the conventional and the new composite panel systems to increase the understanding of their behaviour under nonuniform elevated temperature conditions and to develop fire design rules. The measured time-temperature distributions obtained from the fire tests were used. Since the fire tests showed that the plasterboards provided sufficient lateral restraint until the failure of LSF wall panels, this assumption was also used in the analyses and was further validated by comparison with experimental results. Hence in this study of LSF wall studs, only the flexural buckling about the major axis and local buckling were considered. A new fire design method was proposed using AS/NZS 4600 (SA, 2005), NAS (AISI, 2007) and Eurocode 3 Part 1.3 (ECS, 2006). The importance of considering thermal bowing, magnified thermal bowing and neutral axis shift in the fire design was also investigated. A spread sheet based design tool was developed based on the above design codes to predict the failure load ratio versus time and temperature for varying LSF wall configurations including insulations. Idealised time-temperature profiles were developed based on the measured temperature values of the studs. This was used in a detailed numerical study to fully understand the structural behaviour of LSF wall panels. Appropriate equations were proposed to find the critical temperatures for different composite panels, varying in steel thickness, steel grade and screw spacing for any load ratio. Hence useful and simple design rules were proposed based on the current cold-formed steel structures and fire design standards, and their accuracy and advantages were discussed. The results were also used to validate the fire design rules developed based on AS/NZS 4600 (SA, 2005) and Eurocode Part 1.3 (ECS, 2006). This demonstrated the significant improvements to the design method when compared to the currently used prescriptive design methods for LSF wall systems under fire conditions. In summary, this research has developed comprehensive experimental and numerical thermal and structural performance data for both the conventional and the proposed new load bearing LSF wall systems under standard fire conditions. Finite element models were developed to predict the failure times of LSF walls accurately. Idealized hot flange temperature profiles were developed for non-insulated, cavity and externally insulated load bearing wall systems. Suitable fire design rules and spread sheet based design tools were developed based on the existing standards to predict the ultimate failure load, failure times and failure temperatures of LSF wall studs. Simplified equations were proposed to find the critical temperatures for varying wall panel configurations and load ratios. The results from this research are useful to both structural and fire engineers and researchers. Most importantly, this research has significantly improved the knowledge and understanding of cold-formed LSF loadbearing walls under standard fire conditions.

Meeting under the “Omei” Tree in the Torres Strait Islands : networks and funds of knowledge of mathematical ideas

This paper focuses on the turning point experiences that worked to transform the researcher during a preliminary consultation process to seek permission to conduct of a small pilot project on one Torres Strait Island. The project aimed to learn from parents how they support their children in their mathematics learning. Drawing on a community research design, a consultative meeting was held with one Torres Strait Islander community to discuss the possibility of piloting a small project that focused on working with parents and children to learn about early mathematics processes. Preliminary data indicated that parents use networks in their community. It highlighted the funds of knowledge of mathematics that exist in the community and which are used to teach their children. Such knowledges are situated within a community’s unique histories, culture and the voices of the people. “Omei” tree means the Tree of Wisdom in the Island community.